Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELASTIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Single-crystal elasticity of (Mg[subscript 0.9]Fe[subscript 0.1])O to 81 GPa

Ferropericlase is the second most abundant mineral in Earth's lower mantle and knowledge of its elastic properties at relevant conditions is needed to adequately interpret seismic observations in terms of the mineralogy and thermal state of the deep Earth. Here, we report the complete elastic tensor of (Mg{sub 0.9}Fe{sub 0.1})O ferropericlase to 81.2 GPa at room temperature measured by Brillouin spectroscopy and X-ray diffraction in the diamond-anvil cell. Our data indicate that the spin transition of iron between 45 and 63 GPa dramatically affects the longitudinal and off-diagonal elements of the elastic stiffness tensor c{sub 11} and c{sub 12}, whereas it leaves the shear constant c{sub 44} almost unaffected. Based on our results, the spin transition markedly changes the pressure (and temperature) dependence of the compressional and bulk sound velocities and must be taken into account in any attempt to match average radial seismic velocity profiles with mineral physics observations. The different pressure dependence of compressional (and bulk) and shear sound velocities across the high-spin to low-spin (HS-LS) transition implies that the spin transition might be best observed in the v{sub p}/v{sub s} ratio and its pressure (and temperature) derivative. We also point out the possibility that the spin transition leads to an anti-correlated temperature dependence of shear and compressional wave speeds in certain pressure-temperature regimes in Earth's lower mantle.

58 GEOSCIENCES↗

TU-F-CAMPUS-J-03: Elasticity Functions Based On 4DCT Images to Predict Tumor and Normal Tissue Response to Radiation for Patients with Lung Cancers

Purpose: To investigate radiotherapy outcomes by incorporating 4DCT-based physiological and tumor elasticity functions for lung cancer patients. Methods: 4DCT images were acquired from 28 lung SBRT patients before radiation treatment. Deformable image registration (DIR) was performed from the end-inhale to the end-exhale using a B-Spline-based algorithm (Elastix, an open source software package). The resultant displacement vector fields (DVFs) were used to calculate a relative Jacobian function (RV) for each patient. The computed functions in the lung and tumor regions represent lung ventilation and tumor elasticity properties, respectively. The 28 patients were divided into two groups: 16 with two-year tumor local control (LC) and 12 with local failure (LF). The ventilation and elasticity related RV functions were calculated for each of these patients. Results: The LF patients have larger RV values than the LC patients. The mean RV value in the lung region was 1.15 (±0.67) for the LF patients, higher than 1.06 (±0.59) for the LC patients. In the tumor region, the elasticity-related RV values are 1.2 (±0.97) and 0.86 (±0.64) for the LF and LC patients, respectively. Among the 16 LC patients, 3 have the mean RV values greater than 1.0 in the tumors. These tumors were located near the diaphragm, where the displacements are relatively large.. RV functions calculated in the tumor were better correlated with treatment outcomes than those calculated in the lung. Conclusion: The ventilation and elasticity-related RV functions in the lung and tumor regions were calculated from 4DCT image and the resultant values showed differences between the LC and LF patients. Further investigation of the impact of the displacements on the computed RV is warranted. Results suggest that the RV images might be useful for evaluation of treatment outcome for lung cancer patients.

60 APPLIED LIFE SCIENCES↗

Ultrasonic evaluation of oxidation and reduction effects on the elastic behavior and global microstructure of YBa2Cu3O7-x

Ultrasonic velocity measurement techniques were used to evaluate the effects of oxidation and reduction on the elastic properties, global microstructure and oxygen content of the YBa2Cu3O(7-x) ceramic superconductor for samples ranging from 70 to 90 pct. of theoretical density. Bulk density, velocity, and elastic modulus generally increased with increasing oxygen content upon oxidation, and this behavior was reversible. Velocity image patterns were similar after oxidation and reduction treatments for a 90 pct. dense sample, although the velocity value at any given point on the sample was changed following the treatments. The unchanging pattern correlated with destructive measurements showing that the spatial pore distribution (fraction and size) was not measurably altered after the treatments. Changes in superconducting behavior, crystal structure, and grain structure were observed consistent with changes in oxygen content.

Roth, Don J.↗

Ultrasonic evaluation of oxygen content, modulus, and microstructure changes in YBa2Cu3O(7-x) occurring during oxidation and reduction

Ultrasonic velocity measurement techniques were used to evaluate the effects of oxidation and reduction on the elastic properties, global microstructure and oxygen content of the YBa2Cu3O(7-x) ceramic superconductor for samples ranging from 70 to 90 pct of theoretical density. Bulk density, velocity, and elastic modulus generally increased with increasing oxygen content upon oxidation, and this behavior was reversible. Velocity image patterns were similar after oxidation and reduction treatments for a 90 pct. dense sample, although the velocity value at any given point on the sample was changed following the treatments. The unchanging pattern correlated with destructive measurements showing that the spatial pore distribution (fraction and size) was not measurably altered after the treatments. Changes in superconducting behavior, crystal structure, and grain structure were observed consistent with changes in oxygen content.

Roth, Don J.↗

Elastic-Plastic J-Integral Solutions or Surface Cracks in Tension Using an Interpolation Methodology

No closed form solutions exist for the elastic-plastic J-integral for surface cracks due to the nonlinear, three-dimensional nature of the problem. Traditionally, each surface crack must be analyzed with a unique and time-consuming nonlinear finite element analysis. To overcome this shortcoming, the authors have developed and analyzed an array of 600 3D nonlinear finite element models for surface cracks in flat plates under tension loading. The solution space covers a wide range of crack shapes and depths (shape: 0.2 less than or equal to a/c less than or equal to 1, depth: 0.2 less than or equal to a/B less than or equal to 0.8) and material flow properties (elastic modulus-to-yield ratio: 100 less than or equal to E/ys less than or equal to 1,000, and hardening: 3 less than or equal to n less than or equal to 20). The authors have developed a methodology for interpolating between the goemetric and material property variables that allows the user to reliably evaluate the full elastic-plastic J-integral and force versus crack mouth opening displacement solution; thus, a solution can be obtained very rapidly by users without elastic-plastic fracture mechanics modeling experience. Complete solutions for the 600 models and 25 additional benchmark models are provided in tabular format.

Allen, P. A.↗

Elastic-Plastic J-Integral Solutions or Surface Cracks in Tension Using an Interpolation Methodology. Appendix C -- Finite Element Models Solution Database File, Appendix D -- Benchmark Finite Element Models Solution Database File

No closed form solutions exist for the elastic-plastic J-integral for surface cracks due to the nonlinear, three-dimensional nature of the problem. Traditionally, each surface crack must be analyzed with a unique and time-consuming nonlinear finite element analysis. To overcome this shortcoming, the authors have developed and analyzed an array of 600 3D nonlinear finite element models for surface cracks in flat plates under tension loading. The solution space covers a wide range of crack shapes and depths (shape: 0.2 less than or equal to a/c less than or equal to 1, depth: 0.2 less than or equal to a/B less than or equal to 0.8) and material flow properties (elastic modulus-to-yield ratio: 100 less than or equal to E/ys less than or equal to 1,000, and hardening: 3 less than or equal to n less than or equal to 20). The authors have developed a methodology for interpolating between the goemetric and material property variables that allows the user to reliably evaluate the full elastic-plastic J-integral and force versus crack mouth opening displacement solution; thus, a solution can be obtained very rapidly by users without elastic-plastic fracture mechanics modeling experience. Complete solutions for the 600 models and 25 additional benchmark models are provided in tabular format.

Allen, Phillip A.↗

Effect of high hydrostatic pressure on structural stability of Ti{sub 3}GeC{sub 2}: A first-principles investigation

An investigation into the structural stability, electronic and elastic properties of Ti{sub 3}GeC{sub 2} under high hydrostatic pressure was conducted using first-principles calculations based on density functional theory (DFT). From the energy and enthalpy calculations, and the variations of elastic constants with pressure, we conclude that {alpha}-Ti{sub 3}GeC{sub 2} is most stable upon compression to 100 GPa, which is not consistent with the nonhydrostatic in situ synchrotron X-ray diffraction studies. The higher structural stability was analyzed in terms of electronic level. The absence of band gap at the Fermi level and the finite value of the density of states at the Fermi energy reveal the metallic behavior of all polymorphs of Ti{sub 3}GeC{sub 2}. -- Graphical abstract: The less phase stability of {beta}-Ti{sub 3} SiC{sub 2} compared to that of {alpha}-Ti{sub 3} SiC{sub 2} can be interpreted by the states between -6.0 and 3.6 eV shift toward the higher energy region for {beta}-Ti{sub 3} SiC{sub 2} Display Omitted Research highlights: > From the energy and enthalpy calculations of polymorphs for Ti{sub 3}GeC{sub 2}, we can conclude that Ti{sub 3}GeC{sub 2} possessed higher stable structural stability under pressure to 100 GPa, which is not consistent with the nonhydrostatic experiments. > The higher stable structure of Ti{sub 3}GeC{sub 2} is testified by the calculated variations of elastic constants with pressure. > The reasons for this higher stable phase stability were discussed in terms of the electronic level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab initio investigation of Ti{sub 2}Al(C,N) solid solutions

M{sub n+1}AX{sub n} phases (M: early transition metal, A: IIIA- or IVA-group element, X: carbon or nitrogen) are layered ternary compounds that possess both metal- and ceramic-like properties with numerous potential applications in bulk and thin film forms, particularly under high-temperature conditions. In this work, we use the cluster expansion formalism to investigate the energetics of C-N interactions across the entire Ti{sub 2}AlC-Ti{sub 2}AlN composition range. It is shown that there is a definite tendency for ordering in the C,N sublattice. However, the molar volume and bulk modulus of the ordered structures found along the Ti{sub 2}AlC-Ti{sub 2}AlN composition range show small deviations from the (linear) rule of mixing, indicating that despite the ordering tendencies, the C-N interactions are not strong and the solution becomes disordered at relatively low temperatures. Random solid solutions of Ti{sub 2}AlC{sub 1-x}N{sub x} are simulated using special quasirandom structures (SQS) with x=0.25, 0.50, and 0.75. The thermodynamic properties of these structures are compared to those of the structures found to belong to the ground state through the cluster expansion approach. It is found that the structural properties of these approximations to random alloys do not deviate significantly from Vegard's law. The trend in the structural parameters of these SQS are found to agree well with available experimental data and the predictions of the bulk modulus suggest a very weak alloying effect--with respect to Vegard's law--on the elastic properties of Ti{sub 2}AlC{sub 1-x}N{sub x}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Material Property Determinations for Rock Valley Legacy Samples in Support of Source Physics Experiment

The Source Physics Experiment (SPE) is a long-term NNSA research and development effort designed to improve nonproliferation verification and monitoring capabilities. The overarching goals of the SPE program are to improve understanding of prompt signals and physical signatures that develop from underground chemical explosions and associated modeling capabilities. Our work focuses on a primary factor controlling chemical explosion induced signals and signatures: the material properties of the rocks in which the chemical explosion takes place. This document reports on material property determinations of legacy core USGS Test Well F and outcrop analogs for the subsurface stratigraphy for the third phase of SPE in the Rock Valley (RV) area of the Nevada National Security Site (NNSS). The objective of this work is to establish a baseline set of lithologic descriptions and material properties expected prior to observatory borehole drilling in support of the SPE-RVDC (Rock Valley Direct Comparison) experiment. We determine for each rock type the compressional failure envelope, elastic properties as a function of stress (bulk modulus versus mean stress, shear modulus versus shear stress, Young’s modulus versus axial stress and Poisson’s ratio versus axial stress), indirect tensile strength, and porosity. Geologic characterization, both at the core-scale and microscale, provides context for using the data in modeling efforts and to inform interpretations for the material properties testing.

36 MATERIALS SCIENCE↗

Mechanical property determination of high conductivity metals and alloys

Pertinent mechanical properties of three high conductivity metals and alloys; namely, vacuum hot pressed grade S-200E beryllium, OFHC copper and beryllium-copper alloy no. 10 were determined. These materials were selected based on their possible use in rocket thrust chamber and nozzle hardware. They were procured in a form and condition similar to that which might be ordered for actual hardware fabrication. The mechanical properties measured include (1) tension and compression stress strain curves at constant strain rate (2) tensile and compressive creep, (3) tensile and compressive stress-relaxation behavior and (4) elastic properties. Tests were conducted over the temperature range of from 75 F to 1600 F. The resulting data is presented in both graphical and tabular form.

Harrod, D. L.↗

Development and computer implementation of design/analysis techniques for multilayered composite structures. Probabilistic fiber composite micromechanics

Probabilistic composite micromechanics methods are developed that simulate expected uncertainties in unidirectional fiber composite properties. These methods are in the form of computational procedures using Monte Carlo simulation. The variables in which uncertainties are accounted for include constituent and void volume ratios, constituent elastic properties and strengths, and fiber misalignment. A graphite/epoxy unidirectional composite (ply) is studied to demonstrate fiber composite material property variations induced by random changes expected at the material micro level. Regression results are presented to show the relative correlation between predictor and response variables in the study. These computational procedures make possible a formal description of anticipated random processes at the intraply level, and the related effects of these on composite properties.

Stock, Thomas A.↗

Probabilistic Fiber Composite Micromechanics

Probabilistic composite micromechanics methods are developed that simulate expected uncertainties in unidirectional fiber composite properties. These methods are in the form of computational procedures using Monte Carlo simulation. The variables in which uncertainties are accounted for include constituent and void volume ratios, constituent elastic properties and strengths, and fiber misalignment. A graphite/epoxy unidirectional composite (ply) is studied to demonstrate fiber composite material property variations induced by random changes expected at the material micro level. Regression results are presented to show the relative correlation between predictor and response variables in the study. These computational procedures make possible a formal description of anticipated random processes at the intra-ply level, and the related effects of these on composite properties.

Stock, Thomas A.↗

Nonlinear Elastic Effects on the Energy Flux Deviation of Ultrasonic Waves in GR/EP Composites

In isotropic materials, the direction of the energy flux (energy per unit time per unit area) of an ultrasonic plane wave is always along the same direction as the normal to the wave front. In anisotropic materials, however, this is true only along symmetry directions. Along other directions, the energy flux of the wave deviates from the intended direction of propagation. This phenomenon is known as energy flux deviation and is illustrated. The direction of the energy flux is dependent on the elastic coefficients of the material. This effect has been demonstrated in many anisotropic crystalline materials. In transparent quartz crystals, Schlieren photographs have been obtained which allow visualization of the ultrasonic waves and the energy flux deviation. The energy flux deviation in graphite/epoxy (gr/ep) composite materials can be quite large because of their high anisotropy. The flux deviation angle has been calculated for unidirectional gr/ep composites as a function of both fiber orientation and fiber volume content. Experimental measurements have also been made in unidirectional composites. It has been further demonstrated that changes in composite materials which alter the elastic properties such as moisture absorption by the matrix or fiber degradation, can be detected nondestructively by measurements of the energy flux shift. In this research, the effects of nonlinear elasticity on energy flux deviation in unidirectional gr/ep composites were studied. Because of elastic nonlinearity, the angle of the energy flux deviation was shown to be a function of applied stress. This shift in flux deviation was modeled using acoustoelastic theory and the previously measured second and third order elastic stiffness coefficients for T300/5208 gr/ep. Two conditions of applied uniaxial stress were considered. In the first case, the direction of applied uniaxial stress was along the fiber axis (x3) while in the second case it was perpendicular to the fiber axis along the laminate stacking direction (x1).

Prosser, William H.↗

Measurement of the temperature dependence of Young's modulus of cartilage by phase-sensitive optical coherence elastography

The development of an effective system to monitor the changes in the elastic properties of cartilage tissue with increasing temperature in laser reconstruction is an urgent practical task. In this paper, the use of phase-sensitive optical coherence elastography for detection of elastic waves in the sample has allowed Young's modulus of cartilage tissue to be measured directly during heating. Young's modulus was calculated from the group velocity of propagation of elastic waves excited by means of a system supplying focused air pulses. The measurement results are in agreement with the results of measurements of the modulus of elasticity under mechanical compression. The technique developed allows for noninvasive measurements; its development is promising for the use in vivo. (laser biophotonics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design properties of randomly reinforced fiber/resin composites

The pseudoisotropic laminate analogy is used in conjunction with fiber composite micro and macromechanics to predict the thermal and mechanical properties of planar randomly reinforced fiber composites (PRRFC). Theoretical results are presented for boron/epoxy, Thornel-50/epoxy, and S-glass/epoxy PRRFC. The results show that the thermal and elastic properties depend on both constituent materials and the fiber volume ratio. The strength depends also on the type of applied stress.

Chamis, C. C.↗

Design properties of randomly reinforced fiber/resin composites.

The pseudoisotropic laminate analogy is used in conjunction with fiber composite micro and macromechanics to predict the thermal and mechanical properties of planar randomly reinforced fiber composites (PRRFC). Theoretical results are presented for boron/epoxy, Thornel-50/epoxy, and S-glass/epoxy PRRFC. The results show that the thermal and elastic properties depend on both constituent materials and the fiber volume ratio (FVR). The strength depends also on the type of applied stress.

Chamis, C. C.↗

Mapping the structural–mechanical landscape of amorphous carbon with ReaxFF molecular dynamics

We use ReaxFF molecular dynamics (MD) to investigate the relationship between structural and mechanical properties in bulk and nanostructured amorphous carbon (a-C). The liquid-quench MD method is used to generate isotropic bulk samples with mass densities ranging from 0.96 to 3.29 g/cm3. Structural analysis identifies two types of structures with distinct short- and medium-range order: lower-density sp2-dominated a-C, which is characterized by a bimodal ring-size distribution, and higher-density sp3-dominated tetrahedral amorphous carbon (ta-C), exhibiting a unimodal ring-size distribution. Stress–strain MD simulations and analysis reveal how an atomistic structure impacts elastic properties and post-yield atomic rearrangements. All stretched structures demonstrate elastic isotropy and plasticity driven by a ring-size expansion mechanism reflected in changes in ring statistics. The plastic region is substantially larger in ta-C than in a-C due to the post-yield shift from sp3 to sp2 C dominant bonding. In both a-C and ta-C, ultimate failure occurs when a reactive crack, traversed by long sp chains, forms and propagates predominantly perpendicular to the direction of the applied strain. Oxygen infiltration into the fractured region significantly reduces stress resistance, primarily through the early rupture of long sp chains. MD simulations and analysis are extended to a-C slabs, a-C nanotubes, and partially a-C nanotubes. The latter nanostructure highlights the differences between the elastically isotropic a-C walls, which develop circumferential cracking, and the crystalline walls, which tear along crystallographic directions. These results provide a strong foundation for further computational characterization of a-C materials.

Dernov, A. (ORCID:0009000004220973)↗

Theoretical Investigation of Half-Metallic Ferromagnetism in Sodium-Based Fluoro-perovskite NaXF{sub 3} (X = V, Co)

We report on the structural, mechanical, magneto-electronic and thermodynamic properties of cubic sodium based fluoro-perovskite NaXF3 (X = V, Co) through density functional theory (DFT). The generalized gradient approximation of Perdew, Burke, and Ernzerh (GGA-PBE) and the Tran-Blaha modified Becke-Johnson potential (TB-mBJ) are used for modeling exchange-correlation effects. The calculated lattice parameters agree well with the experimental measurements. Elastic properties show that these compounds are mechanically stable. The results of spin-polarized band structure show a half metallic behavior of NaVF{sub 3} and NaCoF{sub 3}. The magnetic study shows that the nature of these compounds is ferromagnetic and the integer value of the total magnetic moment confirms the half metallicity for both materials. The thermodynamic characters are also investigated through quasi-harmonic approximation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗