Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Electrical properties of Pb{sub 1-x}Mn{sub x}Te single crystals with an excess of tellurium

The effect of excess Te atoms (as high as 0.5 at %) and thermal treatment at 473 K for 120 h on the electrical conductivity {sigma}, the thermopower coefficient {alpha}, and the Hall coefficient R of Pb{sub 0.96}Mn{sub 0.04}Te single crystals in the temperature range {approx}77-300 K is investigated. It is shown that excess atoms of tellurium predominantly act as acceptor impurity centers at low concentrations in unannealed samples and form antisite defects at relatively high concentrations (0.05 at % or higher) being located mainly in vacancies of the lead sublattice, and decrease the hole concentration. As a result of annealing, certain lattice defects (for example, deformational) are healed, and the accommodation process for Te atoms at lead-sublattice vacancies is intensified. These processes substantially affect the values of the electrical parameters, their temperature dependences, as well as the sign of the thermopower and Hall coefficients of the samples.

36 MATERIALS SCIENCE↗

Microstructural, optical, and electrical properties of Ni–Al co-doped ZnO films prepared by DC magnetron sputtering

Graphical abstract: - Highlights: • Ni–Al co-doped ZnO (NiAl:ZnO) composite thin films were deposited by DC magnetron sputtering at room temperature. • All films showed a highly preferential (0 0 2) c-axis orientation. • XPS revealed the presence of metallic Ni, NiO, and Ni{sub 2}O{sub 3} states, and Ni atoms were successfully doped in the NiAl:ZnO films. • NiAl:ZnO (3 wt% Ni) film showed the lowest electrical resistivity of 2.59 × 10{sup −3} Ω cm. • Band gap widening (4.18 eV) was observed in the NiAl:ZnO films with 5 wt% Ni. - Abstract: Ni–Al co-doped ZnO (NiAl:ZnO) films with fixed Al content at 2 wt% and different Ni contents (2.5, 3, and 5 wt%) were deposited by DC magnetron sputtering in an argon atmosphere at room temperature. X-ray diffraction revealed that all films showed a highly preferential (0 0 2) c-axis orientation. XPS revealed the presence of metallic Ni, NiO, and Ni{sub 2}O{sub 3} states, and Ni atoms were successfully doped in NiAl:ZnO films, which did not result in a change in ZnO crystal structure and orientation. The electrical resistivity of NiAl:ZnO film was decreased to 2.59 × 10{sup −3} Ω cm at a Ni doping concentration of 3 wt% compared with undoped Al-doped ZnO film (5.58 × 10{sup −3} Ω cm). The mean optical transmittance in the visible range was greater than 80% for all films. Band gap widening (4.18 eV) was observed in the NiAl:ZnO films with 5 wt% Ni, attributed to the Burstein–Moss shift due to the increase of carrier concentration.

36 MATERIALS SCIENCE↗

Preparation of Cu–Fe–O thin films via post oxidation of iron/copper bilayers: structural, optical and electrical properties

Cu–Fe–O thin films were prepared via vacuum thermal evaporation of Fe and Cu after what the obtained bilayer Fe\Cu was annealed in free air at different temperatures during 2 h. The obtained Cu–Fe–O thin films were characterized using X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), electrical and spectrophotometric measurements. X-ray diffraction (XRD) analysis revealed the presence of Fe{sub 2}O{sub 3}, CuO and CuFeO{sub 2} phases. Cu–Fe–O thin films exhibit rough surfaces by analyzing the film morphologies by scanning electron microscopy. Energy dispersive spectroscopy (EDS) technique was used to evaluate Cu–Fe–O thin films stoichiometry. The optical properties reveal that the absorption coefficient of Cu–Fe–O thin films is larger than 10{sup 5} cm{sup −1} and two optical direct band gaps in the range 1.65–2.2 eV were found. The Wemple and DiDomenico model was used to study the dispersion of the refractive index in terms of the single oscillator model. So, optical parameters such as refractive index, extinction coefficient, oscillator energy and dispersion energy were calculated. In addition and by using the model of Spitzer and Fan, the electrical free carrier susceptibility and the carrier concentration on the effective mass ratio were evaluated. All the samples present relatively high electrical resistivity.

36 MATERIALS SCIENCE↗

Layer-structured hexagonal (BN)C semiconductor alloys with tunable optical and electrical properties

Hexagonal boron nitride carbon, h(BN){sub 1-x}(C{sub 2}){sub x}, semiconductor alloys have been grown on sapphire substrates by metal-organic chemical vapor deposition. Bandgap tuning through compositional variation has been demonstrated via optical absorption measurements. Furthermore, an enhancement of approximately 10 orders of magnitude in the electrical conductivity has been attained by increasing the carbon concentration (x) from 0 to 0.21. Experimental results revealed evidences that the critical carbon concentration x{sub c} to form the homogenous h(BN){sub 1-x}(C{sub 2}){sub x} alloys, or the carbon solubility in hBN is about 3.2% at a growth temperature of 1300 °C before carbon clusters form. Based on the predicted phase diagram of cubic (BN){sub 1-x}(C{sub 2}){sub x} and the excellent matches in the structural and thermal properties of hBN and graphite, it is expected that homogenous h(BN){sub 1-x}(C{sub 2}){sub x} alloys with higher x can be achieved and the alloy miscibility gap can be reduced or completely removed by increasing the growth temperature. This is a huge advantage over the InGaN alloy system in which InN decomposes at high temperatures and high growth temperature cannot be utilized to close the miscibility gap. The results indicate that the h(BN){sub 1-x}(C{sub 2}){sub x} alloy system has the potential to tackle the challenging issues facing the emerging two-dimension materials beyond graphene, which include realizing the bandgap engineering, conductivity control, and large wafers of homogeneous films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical investigation on the magnetic and electric properties in TbSb compound through an anisotropic microscopic model

We report the strong correlations between the magnetoresistivity and the magnetic entropy change in the cubic antiferromagnetic TbSb compound. The theoretical investigation was performed through a microscopic model which takes into account the crystalline electrical field anisotropy, exchange coupling interactions between the up and down magnetic sublattices, and the Zeeman interaction. The easy magnetization directions changes from 〈001〉 to 〈110〉 and then to 〈111〉 observed experimentally was successfully theoretically described. Also, the calculation of the temperature dependence of electric resistivity showed good agreement with the experimental data. Theoretical predictions were calculated for the temperature dependence of the magnetic entropy and resistivity changes upon magnetic field variation. Besides, the difference in the spin up and down sublattices resistivity was investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Combination of thermal and electric properties’ measurement techniques in a single setup suitable for radioactive materials in controlled environments and based on the 3 ω approach

We have designed and developed a new experimental setup, based on the 3 Omega method, to measure thermal conductivity, heat capacity and electrical resistivity of variety of samples in a broad temperature range (2 to 600 K) and under magnetic fields up to 9 T. The validity of this method is tested by measuring various kinds of metallic (copper, platinum and constantan) and insulating (SiO 2 ) materials, which have a wide range of thermal conductivity values (1-400 Wm -1 K -1 ). We have successfully employed this technique for measuring thermal conductivity of two actinide single crystals, uranium dioxide and uranium nitride. Thus, this new experimental approach for studying nuclear materials will help to advance reactor fuel development and understanding. Here, we have also shown that this experimental setup can be adapted to Quantum Design PPMS measurement environment and/or cryocooler systems.

3 Omega Method↗

Comparison of structural and electrical properties of Co{sup 2+}doped Mn-Zn soft nano ferrites prepared via coprecipitation and hydrothermal methods

Graphical abstract: - Highlights: • Coprecipitation and hydrothermal synthesis of Co{sup 2+} doped Mn-Zn ferrites. • Dielectric measurements at 3 MHz and 1 GHz frequencies. • Enhanced DC electrical resistivity for samples prepared from hydrothermal technique. • Impedance studies for the prepared samples showing major contribution due to grains. - Abstract: A series of Co doped Mn-Zn ferrites compounds with the formula Mn{sub 0.5}Zn{sub 0.5−x}Co{sub x}Fe{sub 2}O{sub 4} (x = 0, 0.15, 0.25, 0.35 and 0.50) were successfully synthesized by polyethylene glycol-assisted coprecipitation and hydrothermal methods. The structural characterization of the samples was done using X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR). All the samples found to have cubic spinel structure. The average crystallite size of all nanoparticles were estimated using Scherrer's formula and found to lie between 10 and 25 ± 3 nm with small size distribution of particles prepared by hydrothermal method. The FTIR spectrum showed two absorption bands of tetrahedral and octahedral metal-oxygen sites. DC electrical resistivity varied from 4.12 × 10{sup 7} to 8.32 × 10{sup 10} ohm cm with cobalt doping. The dielectric measurements were performed from 20 Hz to 3 MHz and from 1 MHz to 1 GHz frequency ranges. The value of dielectric constant (ε′) varies from 15.54 to 106.25 (1 MHz) and 6.73–16.48 (1 GHz) for all the samples at room temperature. Impedance spectroscopy was carried out from 20 Hz to 3 MHz, at room temperature to study the grains and grain boundaries effect.

36 MATERIALS SCIENCE↗

Electrical Properties of Lunar Environment Used for Predicting Lunar RF Propagation Characteristics

This contribution treats the lunar propagation environment as a three region medium: lunar exosphere, lunar regolith, and lunar bedrocks. Then it provides models for predicting the electromagnetic characteristics of each region. The electromagnetic characteristics could be electric characteristics represented by the complex relative permittivity, or magnetic characteristics represented by the complex relative permeability or both electric and magnetic characteristics. The lunar exosphere and the lunar bedrocks have only electric characteristics. The lunar regolith has both electric and magnetic characteristics. The complex relative permittivity models for lunar regolith are mapping of the corresponding models for Earth surface components reported in ITU-R P. 527-6. The complex relative permittivity prediction model of lunar exosphere is expressed in terms of a plasma frequency similar to the ordinary wave critical frequency in the corresponding model for the ionosphere. Based on this fascicle the following can be concluded for the frequency bands of 390 MHz and above: • The lunar exosphere can be treated as a free space, • The lunar regolith can be considered as non-magnetic, • The regolith complex relative permittivity has no temperature dependence, • The real part of the regolith complex relative permittivity depends only on regolith bulk density and it has no frequency dependence, and • The variation of regolith complex relative permittivity with regolith depth should be taken into consideration. Moreover, at frequencies of 2400 MHz and above, the lunar regolith can be treated as a uniform medium with complex relative permittivity equal to the corresponding complex relative permittivity at the regolith surface.

Electrical Permittivity↗

New ternary intermetallics RE{sub 5}Ru{sub 3}Al{sub 2} (RE = La, Ce, Pr): Synthesis, crystal structures, magnetic and electric properties

Intermetallics RE{sub 5}Ru{sub 3}Al{sub 2} (RE = La, Ce, Pr) were prepared by arc melting of the elemental components with subsequent annealing at 820 K. The crystal structures were determined from single-crystal (Ce{sub 5}Ru{sub 3}Al{sub 2}, Pr{sub 5}Ru{sub 3}Al{sub 2}) and powder (La{sub 5}Ru{sub 3}Al{sub 2}) X-ray diffraction at room temperature. The compounds belong to new structural types: space group R3, Z = 6, a = 13.9270(3) A, c = 8.3260(2) A for Ce{sub 5}Ru{sub 3}Al{sub 2} and space group I2{sub 1}3, Z = 4, a = 9.95419(6) A and 9.8084(3) A for La{sub 5}Ru{sub 3}Al{sub 2} and Pr{sub 5}Ru{sub 3}Al{sub 2}, respectively. The trigonal structure of Ce{sub 5}Ru{sub 3}Al{sub 2} is a distorted variant of the cubic La{sub 5}Ru{sub 3}Al{sub 2} and Pr{sub 5}Ru{sub 3}Al{sub 2} structures. An interesting feature of the Ce{sub 5}Ru{sub 3}Al{sub 2} are the short (2.5299(16) A and 2.5969(15) A) Ce-Ru distances. Magnetic measurements revealed the Pauli paramagnetic behavior in La{sub 5}Ru{sub 3}Al{sub 2} and the Curie-Weiss paramagnetism in Pr{sub 5}Ru{sub 3}Al{sub 2}. The latter compound likely exhibits a kind of magnetically ordered state below 24 K. In turn, Ce{sub 5}Ru{sub 3}Al{sub 2} remains paramagnetic down to 4.2 K and shows signs of mixed valence states of Ce ions. Electrical resistivity measurements indicated simple metallic conductivity in La{sub 5}Ru{sub 3}Al{sub 2} and Pr{sub 5}Ru{sub 3}Al{sub 2}, and a more complex metallic behavior in Ce{sub 5}Ru{sub 3}Al{sub 2}.

36 MATERIALS SCIENCE↗

Studies on Structural, Optical, Thermal and Electrical Properties of Perylene-Doped p-terphenyl Luminophors

A simple solid state reaction technique was employed for the preparation of polycrystalline luminophors of p-terphenyl containing different amounts of perylene followed by spectral characterization techniques viz. XRD, SEM, TGA-DSC, UV–Visible spectroscopy, thermo-electrical conductivity, fluorescence spectroscopy, fluorescence life time spectroscopy and temperature dependent fluorescence. X-ray diffraction profiles of the doped p-terphenyl reveal well-defined and sharp peaks indicate homogeneity and crystallinity. The SEM micrograph of pure p-terphenyl exhibit flakes like grains and then compact and finally gets separately with perylene amounts. The observed results indicate that closed packed crystal structures of doped p-terphenyl during crystal formation. The band gaps estimated from UV–visible spectroscopy decreased from 5.20 to 4.10 eV, while thermo-electrical conductivity increases with perylene content. The fluorescence spectra showed partial quenching of p-terphenyl fluorescence and simultaneously sensitization of perylene fluorescence at the excitation wavelength of p-terphenyl (290 nm) due to excitation energy transfer from p-terphenyl to perylene. The observed sensitization results are in harmony with intense blue color seen in fluorescence microscopy images and has high demand in scintillation process.

36 MATERIALS SCIENCE↗

Polymorphic transformation in TlSe and the electrical properties of phases

Alloys in the TlSe-Se system on the side of the TlSe compound in the phase diagram have been investigated using differential thermal, X-ray powder diffraction, and microstructural analyses. The phase diagram of the system has been constructed, and the temperature dependences of the electrical conductivity of the phases obtained have been examined. An analysis of the thermograms of alloys in the (TlSe){sub 0.96}-Se{sub 0.04} system has revealed a structural phase transition at a temperature of 470 {+-} 1 K. Investigations into the temperature dependences of the electrical conductivity in the range 120-450 K have demonstrated that the temperature dependence of the electrical conductivity for the (TlSe){sub 0.96}-Se{sub 0.04} alloy exhibits metallic behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of oxygen on the optical and electrical properties of magnetron-sputtered indium tin oxide thin films at ambient temperature

Indium Tin Oxide (ITO) thin films are commonly used as transparent conductive layers in the production of solar cells. ITO films are typically heat-treated at temperatures exceeding 200 °C after magnetron sputtering to optimize the physical, optical, and electrical characteristics for photovoltaic devices. Here, this high temperature heating procedure greatly limits the use of potential substrates, particularly those comprised of low-temperature-rated polymers. Herein, we examine the physical, optical, and electrical transport effects of oxygen:argon plasmas during radio frequency magnetron sputtering of ITO on glass and flexible polymer surfaces without subsequent heat treatment. ITO thin films were characterized via sheet resistance testing, UV-Vis spectroscopy, X-ray diffraction, and scanning electron microscopy imaging. Sheet resistance measurements revealed an increase in surface resistance with increasing oxygen concentration during sputtering. UV-Vis optical transmittance measurements demonstrated an improvement in optical transmittance with an increase in oxygen concentration reaching a maximum transmittance at an oxygen concentration of 1-2 %. Most importantly, it was discovered that producing bilayers of ITO with pure argon sputtered plasmas followed by oxygen:argon plasmas produced ITO thin films with suitable resistance and transmittance without the need for high temperature post annealing. These results highlight a methodology for the deposition of ITO thin films on temperature sensitive substrates for flexible photovoltaics and low-cost module production.

36 MATERIALS SCIENCE↗

Structural and electrical properties of the 2Bi{sub 2}O{sub 3}.3ZrO{sub 2} system

Powder mixtures of {alpha}-Bi{sub 2}O{sub 3} (bismite) and monoclinic m-ZrO{sub 2} (baddeleyite) in the molar ratio 2:3 were mechanochemically and thermally treated with the goal to examine the phases, which may appear during such procedures. The prepared samples were characterized by X-ray powder diffraction, differential scanning calorimetry (DSC), electrical measurements, as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The mechanochemical reaction leads to the gradual formation of a nanocrystalline phase, which resembles {delta}-Bi{sub 2}O{sub 3}, a high-temperature Bi{sub 2}O{sub 3} polymorph. Isothermal sintering in air at a temperature of 820 deg. C for 24 h followed by quenching to room temperature yielded a mixture of ZrO{sub 2}-stabilized {beta}-Bi{sub 2}O{sub 3} and m-ZrO{sub 2} phases, whereas in slowly cooled products, the complete separation of the initial {alpha}-Bi{sub 2}O{sub 3} and m-ZrO{sub 2} constituents was observed. The dielectric permittivity of the sintered samples significantly depended on the temperature. The sintered and quenched samples exhibited a hysteresis dependence of the dielectric shift, showing that the ZrO{sub 2}-doped {beta}-Bi{sub 2}O{sub 3} phase possess ferroelectric properties, which were detected for the first time. This fact, together with Rietveld refinement of the {beta}-Bi{sub 2}O{sub 3}/m-ZrO{sub 2} mixture based on neutron powder diffraction data showed that ZrO{sub 2}-doped {beta}-Bi{sub 2}O{sub 3} has a non-centrosymmetric structure with P4-bar2{sub 1}c as the true space group. The ZrO{sub 2} content in the doped {beta}-Bi{sub 2}O{sub 3} and the crystal chemical reasons for the stabilization of the {beta}-Bi{sub 2}O{sub 3} phase by the addition of m-ZrO{sub 2} are discussed. - Graphical abstract: Powder mixtures of the 2Bi{sub 2}O{sub 3}.3ZrO{sub 2} composition were thermally and mechanochemically treated in order to examine the obtained phases, which were characterized by DSC, electrical measurements, SEM, TEM, as well as X-ray and neutron powder diffraction. It is shown that resulting ZrO{sub 2}-doped {beta}-Bi{sub 2}O{sub 3} phase possess ferroelectric properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved optical and electrical properties of rf sputtered Al doped ZnO films on polymer substrates by low-damage processes

Three types of low-damage radio-frequency (rf) magnetron sputtering processes--an interruptive process, a rotating cylindrical holder method, and an off-axis sputtering method--were designed and studied to reduce the film surface temperature during deposition. Low-damage sputtering processes were investigated to improve the resistivity and optical transmittance in the visible range of Al doped ZnO (AZO) thin films deposited on polymer substrates. In the case of the polyethersulfone substrate, AZO films with a resistivity of 1.0x10{sup -3} {omega} cm and an optical transmittance of 75% were obtained by the rotating repeat holder method during rf sputtering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and electrical properties of the sol-gel prepared Sr{sub 1-x}Er{sub x}SnO{sub 3-{delta}} compounds

Erbium-substituted strontium stannates, with Er content 0{<=}x{<=}0.09, have been prepared by sol-gel method. The solubility limit of Er was found to be about 3%. The influence of temperature and the duration of the calcination, on the confirmation of single phase of Er doped SrSnO{sub 3} were investigated by using X-ray powder diffraction. The distribution of Er{sup 3+} in the crystal structure has been studied. Rietveld refinement of the data revealed that the crystal structure of the representative compound (Sr{sub 0.97}Er{sub 0.03}SnO{sub 3-{delta}}) is orthorhombic perovskite (space group Pbnm). The cell dimensions are: a=5.7152(1) A, b=5.7092(1) A and c=8.0710(2) A. The IR spectroscopy measurements of the samples with x{<=}0.03 were done in a wavelength range 400-2000 cm{sup -1} and confirmed the observed tilting in the SnO{sub 6} octahedra. The transport properties in the system Sr{sub 1-x}Er{sub x}SnO{sub 3-{delta}}, x{<=}0.03, were investigated at high temperature. The Sr{sub 0.97}Er{sub 0.03}SnO{sub 3-{delta}} compound exhibits semiconductive behaviour and the electrical transport mechanism agrees with the non-adiabatic small polaron hopping model between nominal states Sn{sup 4+}/Sn{sup 2+} in the temperature ranges 350-525 and 525-693 K separately. - Graphical abstract: The Sr{sub 0.97}Er{sub 0.03}SnO{sub 3-{delta}} compound exhibits semiconductive behaviour and the electrical transport mechanism agrees with the non-adiabatic small polaron hopping model between nominal states Sn{sup 4+}/Sn{sup 2+}. Highlights: Black-Right-Pointing-Pointer Er showed a maximum solubility of 3 mol% in SrSnO{sub 3} perovskite at 1173 K. Black-Right-Pointing-Pointer SnO{sub 6} octahedra in Sr{sub 1-x}Er{sub x}SnO{sub 3-{delta}} are tilted. Black-Right-Pointing-Pointer The expansion of the cell parameters ascribed to the apparition of Sn{sup 2+} ions. Black-Right-Pointing-Pointer Transport mechanism in Sr{sub 0.97}Er{sub 0.03}SnO{sub 3-{delta}} agrees with the non-adiabatic small polaron hopping model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relation between the magnetization and the electrical properties of alloy GaSb-MnSb films

The influence of the charge carrier concentration on the magnetic properties of GaSb-MnSb alloys is studied. The ferromagnetism of GaSb-MnSb films is caused by the presence of MnSb granules and manifests itself in both magnetometric measurements and the presence of an anisotropic magnetoresistance and the anomalous Hall effect. Electric conduction is executed by charge carriers (holes) in a GaSb matrix. The magnetization of clusters depends on stoichiometry and the concentration of Mn{sup 2+} and Mn{sup 3+} ions, which is specified by the film growth conditions. At high film growth temperatures, ferromagnetic clusters containing Mn{sup 2+} ions mainly form. At low growth temperatures, an antiferromagnetic phase containing Mn{sup 3+} ions forms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical Properties of Carbon Dioxide Hydrate: Implications for Monitoring CO 2 in the Gas Hydrate Stability Zone

CO 2 and CH 4 clathrate hydrates are of keen interest for energy and carbon cycle considerations. While both typically form on Earth as cubic structure I (sI), we find that pure CO 2 hydrate exhibits over an order of magnitude higher electrical conductivity ( σ ) than pure CH 4 hydrate at geologically relevant temperatures. In this study, the conductivity was obtained from frequency-dependent impedance ( Z ) measurements made on polycrystalline CO 2 hydrate (CO 2 ·6.0 ± 0.2H 2 O by methods here) with 25% gas-filled porosity, compared with CH 4 hydrate (CH 4 ·5.9H 2 O) formed and measured in the same apparatus and exhibiting closely matching grain characteristics. The conductivity of CO 2 hydrate is 6.5 × 10 –4 S/m at 273K with an activation energy ( E a ) of 46.5 kJ/mol at 260–281 K, compared with ~5 × 10 –5 S/m and 34.8 kJ/m for CH 4 hydrate. Equivalent circuit modeling indicates that different pathways govern conduction in CO 2 versus CH 4 hydrate. Results show promise for use of electromagnetic methods in monitoring CO 2 hydrate formation in certain natural settings or in CO 2 /CH 4 exchange efforts.

58 GEOSCIENCES↗

Chatanika radar measurements of the electrical properties of auroral arcs

Ionospheric parameters measured in the presence of auroral arcs by the incoherent scatter Chatanika radar are used to define properties of the arcs. The radar broadcasts at 3-5 MW with a range resolution of 4.5 km along the radar line-of-sight, and has yielded auroral measurements on the variation of electron density, Hall and Pederson conductivity, horizontal electric fields, electrojet currents, precipitating electron energy flux, and the Joule heating rate. Elevation-scan techniques have been utilized to study the latitude and altitude variation of the ionospheric plasma parameters, and fixed-position scans allow determination of ionization conditions, including the electric fields and the acceleration of precipitating auroral electrons. Arcs in the diffuse aurora have been found to be local conductivity enhancements, while discrete arcs correspond to the boundary plasma sheet and have an asymmetric electric field pattern reduced on the northward side.

Vondrak, R. R.↗