SEARCH · Search NASA

Results for “Error Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Dynamic modeling and adaptive control for space stations

Of all large space structural systems, space stations present a unique challenge and requirement to advanced control technology. Their operations require control system stability over an extremely broad range of parameter changes and high level of disturbances. During shuttle docking the system mass may suddenly increase by more than 100% and during station assembly the mass may vary even more drastically. These coupled with the inherent dynamic model uncertainties associated with large space structural systems require highly sophisticated control systems that can grow as the stations evolve and cope with the uncertainties and time-varying elements to maintain the stability and pointing of the space stations. The aspects of space station operational properties are first examined, including configurations, dynamic models, shuttle docking contact dynamics, solar panel interaction, and load reduction to yield a set of system models and conditions. A model reference adaptive control algorithm along with the inner-loop plant augmentation design for controlling the space stations under severe operational conditions of shuttle docking, excessive model parameter errors, and model truncation are then investigated. The instability problem caused by the zero-frequency rigid body modes and a proposed solution using plant augmentation are addressed. Two sets of sufficient conditions which guarantee the globablly asymptotic stability for the space station systems are obtained.

Ih, C. H. C.↗

NASA NTRS1985

Navigation study for low-altitude Earth satellites

This document describes several navigation studies for low-altitude Earth satellites. The use of Global Positioning System Navigation Package data for LANDSAT-5 orbit determination is evaluated. In addition, a navigation analysis for the proposed Tracking and Data Aquisition System is presented. This analysis, based on simulations employing one-way Doppler data, is used to determine the agreement between the Research and Development Goddard Trajectory Determination System and the Sequential Error Analysis Program results. Properties of several geopotential error models are studied and an exploratory study of orbit smoother process noise is presented.

Pastor, P. R.↗

NASA NTRS1986

Generalized parity relations for large space structures with uncertain parameters

The generalized parity relations method is a technique that can be used to detect sensor and actuator failures on a large space structure. A model of a grid structure was used to evaluate the performance of these relations. It shows their relative sensitivity to modeling errors. A method using sensor outputs and actuator inputs is required for the design of the generalized parity relations. Three different estimators are studied. The last estimator can generate relations optimized for the detection of a particular failure which are interesting when the level of sensor noise is high.

Dutilloy, J. R.↗

NASA NTRS1986

Modeling, estimation and identification methods for static shape determination of flexible structures

This paper outlines methods for modeling, identification and estimation for static determination of flexible structures. The shape estimation schemes are based on structural models specified by (possibly interconnected) elliptic partial differential equations. The identification techniques provide approximate knowledge of parameters in elliptic systems. The techniques are based on the method of maximum-likelihood that finds parameter values such that the likelihood functional associated with the system model is maximized. The estimation methods are obtained by means of a function-space approach that seeks to obtain the conditional mean of the state given the data and a white noise characterization of model errors. The solutions are obtained in a batch-processing mode in which all the data is processed simultaneously. After methods for computing the optimal estimates are developed, an analysis of the second-order statistics of the estimates and of the related estimation error is conducted. In addition to outlining the above theoretical results, the paper presents typical flexible structure simulations illustrating performance of the shape determination methods.

Rodriguez, G.↗

NASA NTRS1986

The analysis sensitivity to tropical winds from the Global Weather Experiment

The global scale divergent and rotational flow components of the Global Weather Experiment (GWE) are diagnosed from three different analyses of the data. The rotational flow shows closer agreement between the analyses than does the divergent flow. Although the major outflow and inflow centers are similarly placed in all analyses, the global kinetic energy of the divergent wind varies by about a factor of 2 between different analyses while the global kinetic energy of the rotational wind varies by only about 10 percent between the analyses. A series of real data assimilation experiments has been performed with the GLA general circulation model using different amounts of tropical wind data during the First Special Observing Period of the Global Weather Experiment. In exeriment 1, all available tropical wind data were used; in the second experiment, tropical wind data were suppressed; while, in the third and fourth experiments, only tropical wind data with westerly and easterly components, respectively, were assimilated. The rotational wind appears to be more sensitive to the presence or absence of tropical wind data than the divergent wind. It appears that the model, given only extratropical observations, generates excessively strong upper tropospheric westerlies. These biases are sufficiently pronounced to amplify the globally integrated rotational flow kinetic energy by about 10 percent and the global divergent flow kinetic energy by about a factor of 2. Including only easterly wind data in the tropics is more effective in controlling the model error than including only westerly wind data. This conclusion is especially noteworthy because approximately twice as many upper tropospheric westerly winds were available in these cases as easterly winds.

Paegle, J.↗

NASA NTRS1986

Flight management concepts compatible with air traffic control

With the advent of airline deregulation and increased competition, the need for cost efficient airline operations is critical. This paper summarizes past research efforts and planned research thrusts toward the development of compatible flight management and air traffic control systems that promise increased operational effectiveness and efficiency. Potential capacity improvements resulting from a time-based ATC simulation (fast-time) are presented. Advanced display concepts with time guidance and velocity vector information to allow the flight crew to play an important role in the future ATC environment are discussed. Results of parametric sensitivity analyses are also presented that quantify the fuel/cost penalties for idle-thrust mismodeling and wind-modeling errors.

Morello, S. A.↗

NASA NTRS1986

Active Control Evaluation for Spacecraft (ACES)

The Air Force goal is to develop vibration control techniques for large flexible spacecraft by addressing sensor, actuator, and control hardware and dynamic testing. The Active Control Evaluation for Spacecraft (ACES) program will address the Air Force goal by looking at two leading control techniques and implementing them on a structural model of a flexible spacecraft under laboratory testing. The first phase in the ACES program is to review and to assess the High Authority Control/Low Authority Control (HAC/LAC) and Filter accomodated Model Error Sensitivity Suppression (FAMESS) control techniques for testing on the modified VCOSS structure. Appropriate sensors and actuators will be available for use with both techniques; locations will be the same for both techniques. The control actuators will be positioned at the midpoint and free end of the structure. The laser source for the optical sensor is mounted on the feed mast. The beam will be reflected from a mirror on the offset antenna onto the detectors mounted above the shaker table bay. The next phase is to develop an analysis simulation with the control algorithms implemented for dynamics verification. The third phase is to convert the control laws into high level computer language and test them in the NASA-MSFC facility. The final phase is to compile all analytical and test results for performance comparisons.

Pearson, J.↗

NASA NTRS1986

Robust multivariable controller design for flexible spacecraft

Large, flexible spacecraft are typically characterized by a large number of significant elastic modes with very small inherent damping, low, closely spaced natural frequencies, and the lack of accurate knowledge of the structural parameters. Summarized here is some recent research on the design of robust controllers for such spacecraft, which will maintain stability, and possible performance, despite these problems. Two types of controllers are considered, the first being the linear-quadratic-Gaussian-(LQG)-type. The second type utilizes output feedback using collocated sensors and actuators. The problem of designing robust LQG-type controllers using the frequency domain loop transfer recovery (LTR) method is considered, and the method is applied to a large antenna model. Analytical results regarding the regions of stability for LQG-type controllers in the presence of actuator nonlinearities are also presented. The results obtained for the large antenna indicate that the LQG/LTR method is a promising approach for control system design for flexible spacecraft. For the second type of controllers (collocated controllers), it is proved that the stability is maintained in the presence of certain commonly encountered nonlinearities and first-order actuator dynamics. These results indicate that collocated controllers are good candidates for robust control in situations where model errors are large.

Joshi, Suresh M.↗

NASA NTRS1987

Vibration isolation for line of sight performance improvement

Diagrams of the Reaction Wheel Assembly (RWA) are presented along with charts and graphs illustrating jitter error model, induced vibration tests, radial displacement transfer function, and axial displacement power spectra density. The RWA isolator specification requirements are listed.

Rodden, J. J.↗

NASA NTRS1987

Robust time and frequency domain estimation methods in adaptive control

A robust identification method was developed for use in an adaptive control system. The type of estimator is called the robust estimator, since it is robust to the effects of both unmodeled dynamics and an unmeasurable disturbance. The development of the robust estimator was motivated by a need to provide guarantees in the identification part of an adaptive controller. To enable the design of a robust control system, a nominal model as well as a frequency-domain bounding function on the modeling uncertainty associated with this nominal model must be provided. Two estimation methods are presented for finding parameter estimates, and, hence, a nominal model. One of these methods is based on the well developed field of time-domain parameter estimation. In a second method of finding parameter estimates, a type of weighted least-squares fitting to a frequency-domain estimated model is used. The frequency-domain estimator is shown to perform better, in general, than the time-domain parameter estimator. In addition, a methodology for finding a frequency-domain bounding function on the disturbance is used to compute a frequency-domain bounding function on the additive modeling error due to the effects of the disturbance and the use of finite-length data. The performance of the robust estimator in both open-loop and closed-loop situations is examined through the use of simulations.

Lamaire, Richard Orville↗

NASA NTRS1986

A theoretical analysis of the round-off propagation in different Kalman filter implementations

A theoretical analysis is made of the error propagation due to numerical round-off for four different Kalman filter implementations: the conventional Kalman filter, the square root covariance filter, the square root information filter and the Chandrasekhar square root filter. From these error models, new insights about the applicability of the different filters and their sensitivity to round-off, is obtained. It is shown that the CKF may become completely unreliable when the original plant is unstable, and that this is easily circumvented by a number of techniques. The square root filters, often quoted to possess a conditioning or sensitivity that is the square root of that of the CKF, are shown to possess this property only for the computation of the covariance of the filtered signal and not for the computation of the Kalman gain or the filtered estimate. Finally, the Chandrasekhar filter is shown to be numerically unstable.

Verhaegen, M.↗

NASA NTRS1987

Simplified solution for a class of fading memory filters

A fading memory filter is a least squares estimator (LSE) that applies an exponentially decaying weight to past measurements. When compared with a standard Kalman filter, its key advantages are asymptotic stability and reduced sensitivity to modeling errors. This paper derives a simple solution for a class of fading memory filters, resulting in a reduction in computational complexity. Steady state filter solutions are obtained for second- and third-order filters used in a global positioning system (GPS) receiver for high dynamic vehicles.

Statman, Joseph I.↗

NASA NTRS1987

Studies of multi-baseline spaceborne interferometric synthetic aperture radars

A set of Seasat SAR data that were obtained in nearly repeat ground track orbits is utilized to simulate the performance of spaceborne interferometric synthetic aperture radar (ISAR) systems. A qualitative assessment of the topography measurement capability is presented. A phase measurement error model is described and compared with the data obtained at various baseline separations and signal-to-noise ratios. Finally, the implications of these results on the future spaceborne ISAR design are discussed.

Li, F.↗

NASA NTRS1988

Using ridge regression in systematic pointing error corrections

A pointing error model is used in the antenna calibration process. Data from spacecraft or radio star observations are used to determine the parameters in the model. However, the regression variables are not truly independent, displaying a condition known as multicollinearity. Ridge regression, a biased estimation technique, is used to combat the multicollinearity problem. Two data sets pertaining to Voyager 1 spacecraft tracking (days 105 and 106 of 1987) were analyzed using both linear least squares and ridge regression methods. The advantages and limitations of employing the technique are presented. The problem is not yet fully resolved.

Guiar, C. N.↗

NASA NTRS1988

Precise interferometric tracking of spacecraft at low sun-earth-probe angles

When a spacecraft is at low sun-earth-probe (SEP) angle, phase perturbations induced in the spacecraft's signal by the solar plasma can impede the acquisition of meaningful spacecraft Very Long Baseline Interferometry (VLBI) measurements. This phenomenon imposes limitations on our ability to successfully acquire the spacecraft signal, and also introduces unmodeled errors into data that are successfully acquired. In this paper, an analysis of the solar plasma induced error on interferometric delay rate as a function of SEP angle is performed. In addition, the probability of correct signal phase connection as a function of SEP angle and plasma variability is calculated for 2.3 GHz and 8.4 GHz signals. In December 1986, an experiment was conducted to demonstrate VLBI navigation at low SEP angles, using the Voyager 2 spacecraft. The results of this experiment are consistent with the conclusions reached in the low SEP analysis and are also consistent with a theoretical error model for water vapor fluctuations in the earth's troposphere.

Kahn, Robert D.↗

NASA NTRS1988

Interfacial tension and vapor-liquid equilibria in the critical region of mixtures

In the critical region, the concept of two-scale-factor universality can be used to accurately predict the surface tension between near-critical vapor and liquid phases from the singularity in the thermodynamic properties of the bulk fluid. In the present work, this idea is generalized to binary mixtures and is illustrated using the data of Hsu et al. (1985) for CO2 + n-butane. The pressure-temperature-composition-density data for coexisting, near-critical phases of the mixtures are fitted with a thermodynamic potential comprised of a sum of a singular term and nonsingular terms. The nonuniversal amplitudes characterizing the singular term for the mixtures are obtained from the amplitudes for the pure components by interpolation in a space of thermodynamic 'field' variables. The interfacial tensions predicted for the mixtures from the singular term are within 10 percent of the data on three isotherms in the pressure range (Pc - P)/Pc of less than 0.5. This difference is comparable to the combined experimental and model errors.

Moldover, Michael R.↗

NASA NTRS1988

Observability analysis of inertial navigation systems during in-flight alignment

In this work the observability of an Inertial Navigation System (INS) during In-Flight Alignment (IFA) is investigated. A systematic approach to the observability analysis of a piece-wise constant system is presented and its use is justified mathematically. As a tool for the investigation a Stepped Observability Matrix (SOM) is constructed and a corresponding Stepped Space is defined. The INS error model is transformed into the Stepped Space during a specially chosen IFA trajectory and a full observability is carried out. The results of the mathematical analysis are checked against the results of covariance simulation and a full agreement is found between the two. Finally, the practical implications of this analysis are outlined.

Bar-Itzhack, I. Y.↗

NASA NTRS1988

ACES program - Lessons learned

The ACES Program involved the experimental evaluation of three LSS (large space structures) control design techniques at the LSS GTF (ground test facility) at NASA/MSFC. The three techniques were developed under the ACOSS (active control of space structures) Program specifically for application to LSS. The techniques included FAMESS (filter accommodated model error sensitivity suppression), HAC/LAC (high authority control/low authority control), and positivity. Some of the lessons that have been learned during the course of the ACES program are examined.

Jones, Victoria L.↗