Search NASA⌕ Search

SEARCH · Search NASA

Results for “FOSSIL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Tuning Sugarcane Bagasse Biochar into a Potential Carbon Black Substitute for Polyethylene Composites

One of the most used carbonaceous materials by industry are carbon blacks, which have technological applications in polymeric composites, coatings and paints, electric and electrochemical devices. One drawback is that they are produced from fossil fuels. Although biochars are also carbonaceous materials some disadvantages like their larger particles size, high ash content and highly oxygenated surface must be overcome to enable their use as substitute of carbon blacks in composites. Sugarcane bagasse biochar was used to produce carbonaceous materials to substitute carbon blacks. Milling of biochar decreased particle size from several hundreds of micrometers to 100–500 nm and narrowed its size distribution. Chemical leaching reduced the inorganic compounds and ash content by almost 20%. Great advance was achieved when biochar was thermally annealed in alcohol vapor atmosphere which resulted in biochar-based material with very low oxygenated carbon species at particles surface and turned them hydrophobic. Almost no C–O/C=O and O–C=O peaks components were observed at the X-ray photoelectron spectroscopy spectrum. Reactive thermal annealing of the biochar based additive was a key procedure to obtain polyethylene composites (5% loading) with mechanical, thermal and colorimetric properties very close to the ones prepared with the carbon black from fossil fuels.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Growth Rates of Global Energy Systems and Future Outlooks

The world is interconnected and powered by a number of global energy systems using fossil, nuclear, or renewable energy. This study reviews historical time series of energy production and growth for various energy sources. It compiles a theoretical and empirical foundation for understanding the behaviour underlying global energy systems' growth. The most extreme growth rates are found in fossil fuels. The presence of scaling behaviour, i.e. proportionality between growth rate and size, is established. The findings are used to investigate the consistency of several long-range scenarios expecting rapid growth for future energy systems. The validity of such projections is questioned, based on past experience. Finally, it is found that even if new energy systems undergo a rapid 'oil boom'-development-i.e. they mimic the most extreme historical events-their contribution to global energy supply by 2050 will be marginal.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2018

Optimal control of anthropogenic carbon dioxide emissions through technological options: a modeling study

The anthropogenic emission of carbon dioxide (CO{sub 2}) is the prime culprit for the menace of global warming. To achieve the goal of mitigation of global warming, it is crucial to curb the anthropogenic carbon dioxide emissions. The prime anthropogenic source of CO{sub 2} is fossil fuel burning. In this paper, we propose a nonlinear mathematical model to study the impact of technological options, used for the reduction of CO{sub 2} emissions from fossil fuel burning and industrial processes, on the control of atmospheric CO{sub 2}. In the modeling process, it is assumed that the technological options are implemented to curb the CO{sub 2} emissions from the source at a rate proportional to the anthropogenic CO{sub 2} emissions. Model analysis reveals that the atmospheric level of CO{sub 2} can be effectively reduced by increasing the implementation rate of technological options and their efficiency. The strategies which optimally reduce atmospheric CO{sub 2} levels while minimizing the cost associated with the implementation of technological options are identified using optimal control theory. Numerical simulation has been carried out to illustrate theoretical results.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2012

Biocatalysts: Beautiful creatures

Highlights: Black-Right-Pointing-Pointer Enzymes are vital tools. Black-Right-Pointing-Pointer Bifunctional enzymes. Black-Right-Pointing-Pointer Peculiar biocatalysts. -- Abstract: The chemical industry has come under increasing pressure to make chemical production more eco-friendly and independent to fossil resources. The development of industrial processes based on micro-organisms can especially help to eliminate the use or the generation of hazardous substances and can support the transition from dependence on fossil resources towards real sustainable and eco-safety industrial processes. The biocatalysts are the best solution given by nature that can be used to improve some biotechnological applications. In this research review, we report some peculiar properties of biocatalysts, implicated in a range of metabolic pathways and biotechnological tools.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2015

Integrated solar thermochemical reaction system for steam methane reforming

Solar-aided upgrade of the energy content of fossil fuels, such as natural gas, can provide a near-term transition path towards a future solar-fuel economy and reduce carbon dioxide emission from fossil fuel consumption. Both steam and dry reforming a methane-containing fuel stream have been studied with concentrated solar power as the energy input to drive the highly endothermic reactions but the concept has not been demonstrated at a commercial scale. Under a current project with the U.S. Department of Energy, PNNL is developing an integrated solar thermochemical reaction system that combines solar concentrators with micro- and meso-channel reactors and heat exchangers to accomplish more than 20% solar augment of methane higher heating value. The objective of our three-year project is to develop and prepare for commercialization such solar reforming system with a high enough efficiency to serve as the frontend of a conventional natural gas (or biogas) combined cycle power plant, producing power with a levelized cost of electricity less than 6¢/kWh, without subsidies, by the year 2020. In this paper, we present results from the first year of our project that demonstrated a solar-to-chemical energy conversion efficiency as high as 69% with a prototype reaction system.

03 NATURAL GAS↗
DOE OSTI2018

Life cycle impact assessment of artisanal sandstone mining on the environment and health of mine workers

Highlights: • Life cycle assessment (LCA) of artisanal sandstone mining in South Africa • Impact assessment of sandstone mining activities on environment and health • Fossil fuel and coal generated electricity are major non-renewable energy sources • Diesel fuel combustion during transportation phase contributed to major emissions • Silicosis and musculoskeletal problems are most common health issues - Abstract: Artisanal and small scale mining (ASM) is considered as a means to support and improve the quality of rural life, and is often the only activity that local communities have to sustain themselves. It is important to understand the nature of ASM and associated environmental effects in order to make informed decisions on the management, licensing and policy formulation of the ASM sector. Compared to other mined commodities such as, gold or diamond, the studies focusing on environmental and health impacts of sandstone mining are limited. This study used life cycle assessment (LCA) tool to evaluate the overall impact of artisanal sandstone mining (ASAM) on the environment and human health. The impact categories assessed in the study included: resource depletion, global warming, ozone layer depletion and acidification. It was observed that the impact of ASAM on the environment was minimal, however the high physical demand of the work negatively affected the health of the miners. The most common health related issues with the miners was observed to be silicosis and musculoskeletal problems. Fossil fuel used during transportation was observed to be the highest contributor for most of the impact categories.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2012

Combustion-Assisted CO2 Capture Using MECC Membranes

Mixed Electron and Carbonate ion Conductor (MECC) membranes have been proposed as a means to separate CO2 from power plant flue gas. Here a modified MECC CO2 capture process is analyzed that supplements retentate pressurization and permeate evacuation as a means to create a CO2 driving force with a process assisted by the catalytic combustion of syngas on the permeate side of the membrane. The combustion reactions consume transported oxygen, making it unavailable for the backwards transport reaction. With this change, the MECC capture system becomes exothermic, and steam for electricity production may be generated from the waste heat. Greater than 90% of the CO2 in the flue gas may be captured, and a compressed CO2 product stream is produced. A fossil-fueled power plant using this process would consume 14% more fuel per unit electricity produced than a power plant with no CO2 capture system, and has the potential to meet U.S. DOE s goal that deployment of a CO2 capture system at a fossil-fueled power plant should not increase the cost of electricity from the combined facility by more than 30%.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2012

Greenhouse gas emissions from MSW incineration in China: Impacts of waste characteristics and energy recovery

Determination of the amount of greenhouse gas (GHG) emitted during municipal solid waste incineration (MSWI) is complex because both contributions and savings of GHGs exist in the process. To identify the critical factors influencing GHG emissions from MSWI in China, a GHG accounting model was established and applied to six Chinese cities located in different regions. The results showed that MSWI in most of the cities was the source of GHGs, with emissions of 25-207 kg CO{sub 2}-eq t{sup -1} rw. Within all process stages, the emission of fossil CO{sub 2} from the combustion of MSW was the main contributor (111-254 kg CO{sub 2}-eq t{sup -1} rw), while the substitution of electricity reduced the GHG emissions by 150-247 kg CO{sub 2}-eq t{sup -1} rw. By affecting the fossil carbon content and the lower heating value of the waste, the contents of plastic and food waste in the MSW were the critical factors influencing GHG emissions of MSWI. Decreasing food waste content in MSW by half will significantly reduce the GHG emissions from MSWI, and such a reduction will convert MSWI in Urumqi and Tianjin from GHG sources to GHG sinks. Comparison of the GHG emissions in the six Chinese cities with those in European countries revealed that higher energy recovery efficiency in Europe induced much greater reductions in GHG emissions. Recovering the excess heat after generation of electricity would be a good measure to convert MSWI in all the six cities evaluated herein into sinks of GHGs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2011

Rapid growth in CO2 emissions after the 2008-2009 global financial crisis

Global carbon dioxide emissions from fossil-fuel combustion and cement production grew 5.9% in 2010, surpassed 9 Pg of carbon (Pg C) for the first time, and more than offset the 1.4% decrease in 2009. The impact of the 2008 2009 global financial crisis (GFC) on emissions has been short-lived owing to strong emissions growth in emerging economies, a return to emissions growth in developed economies, and an increase in the fossil-fuel intensity of the world economy.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2015

Comparative study of microfacies variation in two samples from the Chittenango member, Marcellus shale subgroup, western New York state, USA

This study demonstrates the significant lithologic variations that occur within the two shale samples from the Chittenango member of the Marcellus shale formation from western New York State in terms of mineralogical composition, type of lamination, pyrite occurrences and fossil content using thin section detailed description and field emission Scanning electron microscope (FESEM) with energy dispersive X-Ray Spectrum (EDX). This study is classified samples as laminated clayshale and fossiliferous carbonaceous shale. The most important detrital constituents of these shales are the clay mineral illite and chlorite, quartz, organic matter, carbonate mineral, and pyrite. The laminated clayshale has a lower amount of quartz and carbonate minerals than fossiliferous carbonaceous shale while it has a higher amount of clay minerals (chlorite and illite) and organic matter. FESEM analysis confirms the presence of chlorite and illite. The fossil content in the laminated clayshale is much lower than the fossiliferous carbonaceous shale. This can provide greater insights about variations in the depositional and environmental factors that influenced its deposition. This result can be compiled with the sufficient data to be helpful for designing the horizontal wells and placement of hydraulic fracturing in shale gas exploration and production.

58 GEOSCIENCES↗
DOE OSTI2018

Economic carbon cycle feedbacks may offset additional warming from natural feedbacks

As the Earth warms, carbon sinks on land and in the ocean will weaken, thereby increasing the rate of warming. Although natural mechanisms contributing to this positive climate–carbon feedback have been evaluated using Earth system models, analogous feedbacks involving human activities have not been systematically quantified. Here we conceptualize and estimate the magnitude of several economic mechanisms that generate a carbon–climate feedback, using the Kaya identity to separate a net economic feedback into components associated with population, GDP, heating and cooling, and the carbon intensity of energy production and transportation. We find that climate-driven decreases in economic activity (GDP) may in turn decrease human energy use and thus fossil fuel CO 2 emissions. In a high radiative forcing scenario, such decreases in economic activity reduce fossil fuel emissions by 13% this century, lowering atmospheric CO 2 by over 100 ppm in 2100. The natural carbon–climate feedback, in contrast, increases atmospheric CO 2 over this period by a similar amount, and thus, the net effect including both feedbacks is nearly zero. Our work highlights the importance of improving the representation of climate–economic feedbacks in scenarios of future change. Although the effects of climate warming on the economy may offset weakening land and ocean carbon sinks, a loss of economic productivity will have high societal costs, potentially increasing wealth inequity and limiting resources available for effective adaptation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Brilliant angle-independent structural colours preserved in weevil scales from the Swiss Pleistocene

Extant weevils exhibit a remarkable colour palette that ranges from muted monochromatic tones to rainbow-like iridescence, with the most vibrant colours produced by three-dimensional photonic nanostructures housed within cuticular scales. Although the optical properties of these nanostructures are well understood, their evolutionary history is not fully resolved, in part due to a poor knowledge of their fossil record. Here, we report three-dimensional photonic nanostructures preserved in brightly coloured scales of two weevils, belonging to the genus Phyllobius or Polydrusus , from the Pleistocene (16–10 ka) of Switzerland. The scales display vibrant blue, green and yellow hues that resemble those of extant Phyllobius/Polydrusus . Scanning electron microscopy and small-angle X-ray scattering analyses reveal that the subfossil scales possess a single-diamond photonic crystal nanostructure. In extant Phyllobius/Polydrusus , the near-angle-independent blue and green hues function primarily in crypsis. The preservation of far-field, angle-independent structural colours in the Swiss subfossil weevils and their likely function in substrate matching confirm the importance of investigating fossil and subfossil photonic nanostructures to understand the evolutionary origins and diversification of colours and associated behaviours (e.g. crypsis) in insects.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Synchrotron X-ray absorption spectroscopy of melanosomes in vertebrates and cephalopods: implications for the affinity of Tullimonstrum

Screening pigments are essential for vision in animals. Vertebrates use melanins bound in melanosomes as screening pigments, whereas cephalopods are assumed to use ommochromes. In this work, preserved eye melanosomes in the controversial fossil Tullimonstrum (Mazon Creek, IL, USA) are partitioned by size and/or shape into distinct layers. These layers resemble tissue-specific melanosome populations considered unique to the vertebrate eye. Here, we show that extant cephalopod eyes also show tissue-specific size- and/or shape-specific partitioning of melanosomes; these differ from vertebrate melanosomes in the relative abundance of trace metals and in the binding environment of copper. Chemical signatures of melanosomes in the eyes of Tullimonstrum more closely resemble those of modern cephalopods than those of vertebrates, suggesting that an invertebrate affinity for Tullimonstrum is plausible. Melanosome chemistry may thus provide insights into the phylogenetic affinities of enigmatic fossils where melanosome size and/or shape are equivocal.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2011

Control Strategies for Distributed Energy Resources to Maximize the Use of Wind Power in Rural Microgrids

The focus of this paper is to design control strategies for distributed energy resources (DERs) to maximize the use of wind power in a rural microgrid. In such a system, it may be economical to harness wind power to reduce the consumption of fossil fuels for electricity production. In this work, we develop control strategies for DERs, including diesel generators, energy storage and demand response, to achieve high penetration of wind energy in a rural microgrid. Combinations of centralized (direct control) and decentralized (autonomous response) control strategies are investigated. Detailed dynamic models for a rural microgrid are built to conduct simulations. The system response to large disturbances and frequency regulation are tested. It is shown that optimal control coordination of DERs can be achieved to maintain system frequency while maximizing wind power usage and reducing the wear and tear on fossil fueled generators.

17 WIND ENERGY↗
DOE OSTI2021

Performance of Hybrid Renewable Energy Power System for a Residential Building

Using fossil fuels as the primary way to generate electricity causes a significant effect on the environment. In 2019, more than 64% of the electricity in the United States of America was generated using fossil-fuel resources, while renewable energy (RE) resources contributed to only 17% of the U.S. electricity generation for the same year. Additionally, due to the complex terrain distribution of many states in the U.S., a massive opportunity of utilizing RE resources in rural and remote areas can reduce the cost of electrical grid installation for such areas. In this study, a typical residential building with an average energy utilization of 30.25 kWh/day with a demand peak of 5.34 kW was considered a case study in each state to optimize a hybrid RE system and find the best alternative electrical grid system. This study presents the best configuration between solar and wind energy with different types of energy storage. It was discovered the photovoltaic (PV) solar panels—diesel generators with battery best services in all states. The daily radiation and diesel prices substantially affect the levelized cost of energy (COE) values in each state.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Nannochloropsis oceanica IMET1 and its bacterial symbionts for carbon capture, utilization, and storage: biomass and calcium carbonate production under high pH and high alkalinity

ABSTRACT To combat the increasing levels of carbon dioxide (CO 2 ) released from the combustion of fossil fuels, microalgae have emerged as a promising strategy for biological carbon capture, utilization, and storage. This study used a marine microalgal strain, Nannochloropsis oceanica IMET1, which thrives in high CO 2 concentrations. A high-pH, high-alkalinity culture was designed for CO 2 capture through algal biomass production as well as permanent sequestration through calcium carbonate (CaCO 3 ) precipitation. This was accomplished by timed pH elevation and the addition of sodium bicarbonate to cultures of N. oceanica grown at lab scale (1 L) and pilot scale (500 L) with 10% and 5% CO 2 , respectively. Our data showed that 0.02 M NaHCO 3 promoted algal growth and that sparging cultures with ambient air after 12 days raised pH and created favorable CaCO 3 formation conditions. At the 1 L scale, we reached 1.52 g L −1 biomass after 12 days and an extra 9.3% CO 2 was captured in the form of CaCO 3 precipitates. At the 500 L pilot scale, an extra 60% CO 2 was captured (Day 40) with a maximum CO 2 capture rate of 63.2 g m −2 day −1 (Day 35). Bacterial communities associated with the microalgae were dominated by two novel Patescibacteria. Functional analysis revealed that genes for several plant growth-promotion traits (PGPTs) were enriched within this group. The microalgal-bacterial coculture system offers advantages for enhanced carbon mitigation through biomass production and simultaneous precipitation of recalcitrant CaCO 3 for long-term CO 2 storage. IMPORTANCE Capturing carbon dioxide (CO 2 ) released from fossil fuel combustion is of the utmost importance as the impacts of climate change continue to worsen. Microalgae can remove CO 2 through their natural photosynthetic pathways and are additionally able to convert CO 2 into a stable, recalcitrant form as calcium carbonate (CaCO 3 ). We demonstrate that microalgae-based carbon capture systems can be greatly improved with high pH and high alkalinity by providing optimal conditions for carbonate precipitation. Our results with the microalga, Nannochloropsis oceanica strain IMET1, show an extra 9.3% CO 2 captured as CaCO 3 at the 1 L scale and an extra 60% CO 2 captured at the 500 L (pilot) scale. Our optimized system provides a novel approach to capture CO 2 through two mechanisms: (i) as organic carbon within microalgal biomass and (ii) as inorganic carbon stored permanently in the form of CaCO 3.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2017

The Future of Low-Carbon Electricity

We review future global demand for electricity and major technologies positioned to supply it with minimal greenhouse gas (GHG) emissions: renewables (wind, solar, water, geothermal, and biomass), nuclear fission, and fossil power with CO2 capture and sequestration. We discuss two breakthrough technologies (space solar power and nuclear fusion) as exciting but uncertain additional options for low-net GHG emissions (i.e., low-carbon) electricity generation. In addition, we discuss grid integration technologies (monitoring and forecasting of transmission and distribution systems, demand-side load management, energy storage, and load balancing with low-carbon fuel substitutes). For each topic, recent historical trends and future prospects are reviewed, along with technical challenges, costs, and other issues as appropriate. Although no technology represents an ideal solution, their strengths can be enhanced by deployment in combination, along with grid integration that forms a critical set of enabling technologies to assure a reliable and robust future low-carbon electricity system.

09 BIOMASS FUELS↗