Search NASA⌕ Search

SEARCH · Search NASA

Results for “Gaussian Process Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Disentangling Time-series Spectra with Gaussian Processes: Applications to Radial Velocity Analysis

Measurements of radial velocity variations from the spectroscopic monitoring of stars and their companions are essential for a broad swath of astrophysics; these measurements provide access to the fundamental physical properties that dictate all phases of stellar evolution and facilitate the quantitative study of planetary systems. The conversion of those measurements into both constraints on the orbital architecture and individual component spectra can be a serious challenge, however, especially for extreme flux ratio systems and observations with relatively low sensitivity. Gaussian processes define sampling distributions of flexible, continuous functions that are well-motivated for modeling stellar spectra, enabling proficient searches for companion lines in time-series spectra. We introduce a new technique for spectral disentangling, where the posterior distributions of the orbital parameters and intrinsic, rest-frame stellar spectra are explored simultaneously without needing to invoke cross-correlation templates. To demonstrate its potential, this technique is deployed on red-optical time-series spectra of the mid-M-dwarf binary LP661-13. We report orbital parameters with improved precision compared to traditional radial velocity analysis and successfully reconstruct the primary and secondary spectra. We discuss potential applications for other stellar and exoplanet radial velocity techniques and extensions to time-variable spectra. The code used in this analysis is freely available as an open-source Python package.

79 ASTRONOMY AND ASTROPHYSICS↗

THE MASS-DEPENDENT STAR FORMATION HISTORIES OF DISK GALAXIES: INFALL MODEL VERSUS OBSERVATIONS

We introduce a simple model to explore the star formation histories of disk galaxies. We assume that the disk originate and grows by continuous gas infall. The gas infall rate is parameterized by the Gaussian formula with one free parameter: the infall-peak time t{sub p} . The Kennicutt star formation law is adopted to describe how much cold gas turns into stars. The gas outflow process is also considered in our model. We find that, at a given galactic stellar mass M{sub *}, the model adopting a late infall-peak time t{sub p} results in blue colors, low-metallicity, high specific star formation rate (SFR), and high gas fraction, while the gas outflow rate mainly influences the gas-phase metallicity and star formation efficiency mainly influences the gas fraction. Motivated by the local observed scaling relations, we 'construct' a mass-dependent model by assuming that the low-mass galaxy has a later infall-peak time t{sub p} and a larger gas outflow rate than massive systems. It is shown that this model can be in agreement with not only the local observations, but also with the observed correlations between specific SFR and galactic stellar mass SFR/M{sub *} {approx} M{sub *} at intermediate redshifts z < 1. Comparison between the Gaussian-infall model and the exponential-infall model is also presented. It shows that the exponential-infall model predicts a higher SFR at early stage and a lower SFR later than that of Gaussian infall. Our results suggest that the Gaussian infall rate may be more reasonable in describing the gas cooling process than the exponential infall rate, especially for low-mass systems.

79 ASTRONOMY AND ASTROPHYSICS↗

Discriminative Methodology using the Unscented Transform in Special Euclidean Group SE(3) for Autonomous GN&C

Kalman filtering techniques usually compare a known dynamic model with some process noise to an updated, noisy measurement. Both sources of noise are generally assumed to be Gaussian and are filtered to obtain a more accurate estimate of the state of the system of interest. However, these methods assume that a relatively accurate dynamical model already exists. By including discriminative methodology to interpret differences in the predictive model and the measured states over time, an incorrect model can be corrected overtime, allowing a spacecraft to learn about its environment and adapt to changing conditions. In this paper, a discriminative unscented Kalman filter (DUKF) is introduced on the special Euclidean group SE(3) formulation framework. A spacecraft is initialized near a small body with no knowledge of its parameters, and using several consecutive conditional models the environment is studied and the filter is updated. The case study of a spacecraft in a slightly elliptical, inclined, relatively tight orbit around the irregular moon Phobos is simulated and discussed. The accuracy of this approach is quantifying the differences between the true state, the UKF with a poor model, and the DUKF.

GN&C↗

Assessing correlated truncation errors in modern nucleon-nucleon potentials

We test the BUQEYE model of correlated effective field theory (EFT) truncation errors on Reinert, Krebs, and Epelbaum's semilocal momentum-space implementation of the chiral EFT (𝜒⁢EFT ) expansion of the nucleon-nucleon (NN) potential. This Bayesian model hypothesizes that dimensionless coefficient functions extracted from the order-by-order corrections to NN observables can be treated as draws from a Gaussian process (GP). We combine a variety of graphical and statistical diagnostics to assess when predicted observables have a 𝜒⁢EFT convergence pattern consistent with the hypothesized GP statistical model. Our conclusions are that, first, the BUQEYE model is generally applicable to the potential investigated here, which enables statistically principled estimates of the impact of higher EFT orders on observables. Second, parameters defining the extracted coefficients such as the expansion parameter 𝑄 must be well chosen for the coefficients to exhibit a regular convergence pattern—a property we exploit to obtain posterior distributions for such quantities. Third, the assumption of GP stationarity across lab energy and scattering angle is not generally met; this necessitates adjustments in future work. We provide a workflow and interpretive guide for our analysis framework, and show what can be inferred about probability distributions for 𝑄, the EFT breakdown scale Λ 𝑏 , the scale associated with soft physics in the 𝜒⁢EFT potential 𝑚 eff , and the GP hyperparameters. All our results can be reproduced using a publicly available Jupyter notebook, which can be straightforwardly modified to analyze other 𝜒⁢EFT NN potentials.

Bayesian methods↗

Understanding Extreme Stochastic Events in EUV Resists

© 2017 SPST. The problem of stochastics in photoresist patterning is of significant concern in the commercialization of extreme ultraviolet lithography, especially in patterning of contacts or vias. Traditionally, contact hole critical dimension (CD) variability is characterized as a Gaussian process, however, recent experimental results have demonstrated significant deviations from Gaussian statistics, especially on the small CD side. Modeling results show that this non-Gaussian variation is expected and can be attributed to the non-linear behavior of the contact hole exposure latitude as a function of dose. It is shown that if we consider the noise in the dose or sensitivity domain, it can still be treated as a Gaussian process. The CD statistics are then determined by mapping the Gaussian dose/sensitivity noise through the non-linear and deterministic CD versus dose function.

36 MATERIALS SCIENCE↗

Bayesian inference of in-medium baryon-baryon scattering cross sections from HADES proton flow data

Within a Bayesian statistical framework using a Gaussian Process emulator for an isospin-dependent Boltzmann-Uehling-Uhlenbeck (IBUU) transport model simulator of heavy-ion reactions at intermediate energies, we infer from the HADES proton flow data the posterior probability distribution functions of in-medium baryon-baryon scattering cross section modification factor X with respect to free-space and the corresponding incompressibility K of nuclear matter as well as their correlation function. In conclusion, the mean value of X is found to be $X$ = $1.32_ {+0.28} ^ {-0.40} $ at 68% confidence level assuming the nuclear incompressibility K will not exceed 400 MeV, providing circumstantial evidence for enhanced baryon-braryon scattering cross sections in hot and dense nuclear matter.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Bayesian inference of nuclear incompressibility from collective flow in mid-central Au+Au collisions at 400–1500 MeV/nucleon

The incompressibility K of symmetric nuclear matter (SNM) is determined through a Bayesian analysis of collective flow data from Au + Au collisions at beam energies $E = 400 -1500$ MeV/nucleon. This analysis utilizes a Gaussian process (GP) emulator applied to the isospin-dependent quantum molecular dynamics (IQMD) model for heavy-ion collisions, both with and without incorporating the momentum dependence of the single-nucleon potentials. Specifically, at the 68% confidence level, using rapidity and transverse velocity dependence of proton elliptic flow data with and without consideration of the momentum dependence, the inferred incompressibility values are $K=188.9^{+2.9}_{-4.5}$ MeV and $256.1^{+8.2}_{-8.7}$ MeV at $E = 400$ MeV/nucleon, respectively. When the transverse momentum dependence of proton-like directed flow data is included, the inferred incompressibility values become $K=222.3^{+9.0}_{-9.9}$ MeV and $K=285.5^{+6.7}_{-7.3}$ MeV, respectively. Furthermore, we found that the value of K derived from observables of proton elliptic flow increases with beam energy. Finally, this indicates that the equation of state (EoS) of nuclear matter hardens at higher densities and temperatures in reactions with higher beam energies.

Bayesian inference↗

The orbit and transit prospects for β pictoris b constrained with one milliarcsecond astrometry

A principal scientific goal of the Gemini Planet Imager (GPI) is obtaining milliarcsecond astrometry to constrain exoplanet orbits. However, astrometry of directly imaged exoplanets is subject to biases, systematic errors, and speckle noise. Here, we describe an analytical procedure to forward model the signal of an exoplanet that accounts for both the observing strategy (angular and spectral differential imaging) and the data reduction method (Karhunen–Loève Image Projection algorithm). We use this forward model to measure the position of an exoplanet in a Bayesian framework employing Gaussian processes and Markov-chain Monte Carlo to account for correlated noise. In the case of GPI data on β Pic b, this technique, which we call Bayesian KLIP-FM Astrometry (BKA), outperforms previous techniques and yields 1σ errors at or below the one milliarcsecond level. We validate BKA by fitting a Keplerian orbit to 12 GPI observations along with previous astrometry from other instruments. The statistical properties of the residuals confirm that BKA is accurate and correctly estimates astrometric errors. Our constraints on the orbit of β Pic b firmly rule out the possibility of a transit of the planet at 10-σ significance. However, we confirm that the Hill sphere of β Pic b will transit, giving us a rare chance to probe the circumplanetary environment of a young, evolving exoplanet. As a result, we provide an ephemeris for photometric monitoring of the Hill sphere transit event, which will begin at the start of April in 2017 and finish at the end of January in 2018.

79 ASTRONOMY AND ASTROPHYSICS↗

The Chocolate Chip Cookie Model: Dust Geometry of Milky Way–like Disk Galaxies

We present a new two-component dust geometry model, the Chocolate Chip Cookie model, where the clumpy nebular regions are embedded in a diffuse stellar/interstellar medium disk, like chocolate chips in a cookie. By approximating the binomial distribution of the clumpy nebular regions with a continuous Gaussian distribution and omitting the dust scattering effect, our model solves the dust attenuation process for both the emission lines and stellar continua via analytical approaches. Our Chocolate Chip Cookie model successfully fits the inclination dependence of both the effective dust reddening of the stellar components derived from stellar population synthesis and that of the emission lines characterized by the Balmer decrement for a large sample of Milky Way–like (MW-like) disk galaxies selected from the main galaxy sample of the Sloan Digital Sky Survey. Our model shows that the clumpy nebular disk is about 0.55 times thinner and 1.6 times larger than the stellar disk for MW-like galaxies, whereas each clumpy region has a typical optical depth of τ cl,V ~ 0.5 in the V band. After considering the aperture effect, our model prediction on the inclination dependence of dust attenuation is also consistent with observations. Not only that, in our model, the dust attenuation curve of the stellar population naturally depends on the inclination, and its median case is consistent with the classical Calzetti law. As the modeling constraints are from the optical wavelengths, our model is unaffected by the optically thick dust component, which however could bias the model's prediction of the infrared emissions.

79 ASTRONOMY AND ASTROPHYSICS↗

Transonic Flutter Suppression Control Law Design Using Classical and Optimal Techniques with Wind-Tunnel Results

The benchmark active controls technology and wind tunnel test program at NASA Langley Research Center was started with the objective to investigate the nonlinear, unsteady aerodynamics and active flutter suppression of wings in transonic flow. The paper will present the flutter suppression control law design process, numerical nonlinear simulation and wind tunnel test results for the NACA 0012 benchmark active control wing model. The flutter suppression control law design processes using (1) classical, (2) linear quadratic Gaussian (LQG), and (3) minimax techniques are described. A unified general formulation and solution for the LQG and minimax approaches, based on the steady state differential game theory is presented. Design considerations for improving the control law robustness and digital implementation are outlined. It was shown that simple control laws when properly designed based on physical principles, can suppress flutter with limited control power even in the presence of transonic shocks and flow separation. In wind tunnel tests in air and heavy gas medium, the closed-loop flutter dynamic pressure was increased to the tunnel upper limit of 200 psf. The control law robustness and performance predictions were verified in highly nonlinear flow conditions, gain and phase perturbations, and spoiler deployment. A non-design plunge instability condition was also successfully suppressed.

Mukhopadhyay, Vivek↗

Transonic Flutter Suppression Control Law Design, Analysis and Wind Tunnel Results

The benchmark active controls technology and wind tunnel test program at NASA Langley Research Center was started with the objective to investigate the nonlinear, unsteady aerodynamics and active flutter suppression of wings in transonic flow. The paper will present the flutter suppression control law design process, numerical nonlinear simulation and wind tunnel test results for the NACA 0012 benchmark active control wing model. The flutter suppression control law design processes using (1) classical, (2) linear quadratic Gaussian (LQG), and (3) minimax techniques are described. A unified general formulation and solution for the LQG and minimax approaches, based on the steady state differential game theory is presented. Design considerations for improving the control law robustness and digital implementation are outlined. It was shown that simple control laws when properly designed based on physical principles, can suppress flutter with limited control power even in the presence of transonic shocks and flow separation. In wind tunnel tests in air and heavy gas medium, the closed-loop flutter dynamic pressure was increased to the tunnel upper limit of 200 psf The control law robustness and performance predictions were verified in highly nonlinear flow conditions, gain and phase perturbations, and spoiler deployment. A non-design plunge instability condition was also successfully suppressed.

Mukhopadhyay, Vivek↗

Transonic Flutter Suppression Control Law Design, Analysis and Wind-Tunnel Results

The benchmark active controls technology and wind tunnel test program at NASA Langley Research Center was started with the objective to investigate the nonlinear, unsteady aerodynamics and active flutter suppression of wings in transonic flow. The paper will present the flutter suppression control law design process, numerical nonlinear simulation and wind tunnel test results for the NACA 0012 benchmark active control wing model. The flutter suppression control law design processes using (1) classical, (2) linear quadratic Gaussian (LQG), and (3) minimax techniques are described. A unified general formulation and solution for the LQG and minimax approaches, based on the steady state differential game theory is presented. Design considerations for improving the control law robustness and digital implementation are outlined. It was shown that simple control laws when properly designed based on physical principles, can suppress flutter with limited control power even in the presence of transonic shocks and flow separation. In wind tunnel tests in air and heavy gas medium, the closed-loop flutter dynamic pressure was increased to the tunnel upper limit of 200 psf. The control law robustness and performance predictions were verified in highly nonlinear flow conditions, gain and phase perturbations, and spoiler deployment. A non-design plunge instability condition was also successfully suppressed.

Mukhopadhyay, Vivek↗

Transonic Flutter Suppression Control Law Design Using Classical and Optimal Techniques with Wind-Tunnel Results

The benchmark active controls technology and wind tunnel test program at NASA Langley Research Center was started with the objective to investigate the nonlinear, unsteady aerodynamics and active flutter suppression of wings in transonic flow. The paper will present the flutter suppression control law design process, numerical nonlinear simulation and wind tunnel test results for the NACA 0012 benchmark active control wing model. The flutter suppression control law design processes using (1) classical, (2) linear quadratic Gaussian (LQG), and (3) minimax techniques are described. A unified general formulation and solution for the LQG and minimax approaches, based on the steady state differential game theory is presented. Design considerations for improving the control law robustness and digital implementation are outlined. It was shown that simple control laws when properly designed based on physical principles, can suppress flutter with limited control power even in the presence of transonic shocks and flow separation. In wind tunnel tests in air and heavy gas medium, the closed-loop flutter dynamic pressure was increased to the tunnel upper limit of 200 psf. The control law robustness and performance predictions were verified in highly nonlinear flow conditions, gain and phase perturbations, and spoiler deployment. A non-design plunge instability condition was also successfully suppressed.

Mukhopadhyay, Vivek↗

Predicting boron coordination in multicomponent borate and borosilicate glasses using analytical models and machine learning

Accurate prediction of boron coordination in multicomponent glasses is critical in glass science and technology as it strongly affects the properties of borate and borosilicate glasses. We have collected a dataset containing 657 glasses from literature with boron coordination values and developed models using analytical functions based on the well accepted Dell, Xiao and Bray model. Good prediction of boron coordination with a R 2 value higher than 0.8 was obtained. The large variation of boron coordination from experiments, originated from sample preparations and characterizations, led to difficulties in obtaining models with better prediction performance. Various machine learning (ML) algorithms were evaluated and slightly better prediction performance was observed; however, interpretation of the ML models is less straight forward. In conclusion, this study developed various models capable of providing quantitative boron coordination predictions, providing insights into its structural roles in multi-component glasses, and suggesting fruitful areas for future research.

36 MATERIALS SCIENCE↗

Quantifying correlated truncation errors in effective field theory

Effective field theories (EFTs) organize the description of complex systems into an infinite sequence of decreasing importance. Predictions are made with a finite number of terms, which induces a truncation error that is often left unquantified. Here, we formalize the notion of EFT convergence and propose a Bayesian truncation error model for predictions that are correlated across the independent variables, e.g., energy or scattering angle. Central to our approach are Gaussian processes that encode both the naturalness and correlation structure of EFT coefficients. Our use of Gaussian processes permits efficient and accurate assessment of credible intervals, allows EFT fits to easily include correlated theory errors, and provides analytic posteriors for physical EFT-related quantities such as the expansion parameter. Furthermore, we demonstrate that model-checking diagnostics—applied to the case of multiple curves—are powerful tools for EFT validation. As an example, we assess a set of nucleon-nucleon scattering observables in chiral EFT. In an effort to be self-contained, appendices include thorough derivations of our statistical results. Our methods are packaged in Python code, called gsum, that is available for download on GitHub.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Finite Element Models for Electron Beam Freeform Fabrication Process

Electron beam freeform fabrication (EBF3) is a member of an emerging class of direct manufacturing processes known as solid freeform fabrication (SFF); another member of the class is the laser deposition process. Successful application of the EBF3 process requires precise control of a number of process parameters such as the EB power, speed, and metal feed rate in order to ensure thermal management; good fusion between the substrate and the first layer and between successive layers; minimize part distortion and residual stresses; and control the microstructure of the finished product. This is the only effort thus far that has addressed computer simulation of the EBF3 process. The models developed in this effort can assist in reducing the number of trials in the laboratory or on the shop floor while making high-quality parts. With some modifications, their use can be further extended to the simulation of laser, TIG (tungsten inert gas), and other deposition processes. A solid mechanics-based finite element code, ABAQUS, was chosen as the primary engine in developing these models whereas a computational fluid dynamics (CFD) code, Fluent, was used in a support role. Several innovative concepts were developed, some of which are highlighted below. These concepts were implemented in a number of new computer models either in the form of stand-alone programs or as user subroutines for ABAQUS and Fluent codes. A database of thermo-physical, mechanical, fluid, and metallurgical properties of stainless steel 304 was developed. Computing models for Gaussian and raster modes of the electron beam heat input were developed. Also, new schemes were devised to account for the heat sink effect during the deposition process. These innovations, and others, lead to improved models for thermal management and prediction of transient/residual stresses and distortions. Two approaches for the prediction of microstructure were pursued. The first was an empirical approach involving the computation of thermal gradient, solidification rate, and velocity (G,R,V) coupled with the use of a solidification map that should be known a priori. The second approach relies completely on computer simulation. For this purpose a criterion for the prediction of morphology was proposed, which was combined with three alternative models for the prediction of microstructure; one based on solidification kinetics, the second on phase diagram, and the third on differential scanning calorimetry data. The last was found to be the simplest and the most versatile; it can be used with multicomponent alloys and rapid solidification without any additional difficulty. For the purpose of (limited) experimental validation, finite element models developed in this effort were applied to three different shapes made of stainless steel 304 material, designed expressly for this effort with an increasing level of complexity. These finite element models require large computation time, especially when applied to deposits with multiple adjacent beads and layers. This problem can be overcome, to some extent, by the use of fast, multi-core computers. Also, due to their numerical nature coupled with the fact that solid mechanics- based models are being used to represent the material behavior in liquid and vapor phases as well, the models have some inherent approximations that become more pronounced when dealing with multi-bead and multi-layer deposits.

Chandra, Umesh↗

Inhomogeneous reheating scenario with DBI fields

We discuss a new mechanism which can be responsible for the origin of the primordial perturbation in inflationary models, the inhomogeneous DBI reheating scenario. Light DBI fields fluctuate during inflation, and finally create the density perturbations through modulation of the inflation decay rate. In this note, we investigate the curvature perturbation and its non-Gaussianity from this new mechanism. Presenting generalized expressions for them, we show that the curvature perturbation not only depends on the particular process of decay but is also dependent on the sound speed c{sub s} from the DBI action. More interestingly we find that the non-Gaussianity parameter f{sub NL} is independent of c{sub s}. As an application we exemplify some decay processes which give a viable and detectable non-Gaussianity. Finally we find a possible connection between our model and the DBI-Curvaton mechanism.

79 ASTRONOMY AND ASTROPHYSICS↗