Search NASA⌕ Search

SEARCH · Search NASA

Results for “Heterogeneous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Application of electron backscatter diffraction techniques to quantify effects of aging on sub-grain and spatial heterogeneity in NMC cathodes

Identification and evaluation of structural heterogeneity in spent cathode materials is crucial to developing appropriate remediation strategies for novel recycling processes. Native heterogeneities may be exacerbated during the cell's operational lifetime, as sub-particle-scale variations induce anisotropic expansion and contraction upon cycling. Structural transformations resulting from repeated cycling and calendar aging predominantly occur at the secondary particle surface and at the grain boundaries (GBs) between primary particles. However, the diffusion and stress build up around and across GBs are poorly understood. In this study, electron backscatter diffraction (EBSD) is employed to track sub-grain lattice structure across a statistically relevant number of Li(Ni0.33Mn0.33Co0.33)O2 (NMC-111) particles. Specifically, differences in lattice misorientation – measured as the deviation from the grain's average orientation – are tracked as a function of position within the electrode (near current collector, middle, and near separator) and as a function of electrochemical cycling. Further, a novel method of structural analysis is developed, offering insight into sub-grain diffusion behavior by comparing lattice misorientation near the grain boundary versus in the grain bulk. The present results suggest that electrode-scale spatial heterogeneity in lattice structure is induced by initial manufacturing conditions, and that radial gradients in lattice misorientation evolve at the primary particle scale with repeated electrochemical cycling.

25 ENERGY STORAGE↗

Chronology of ungrouped achondrites Northwest Africa 11119 and 7325/8486: implications for early evolution of a heterogeneous crust on a differentiated planetesimal

The chronology of ungrouped achondrites provides key insights into the timeline of igneous activity in the early Solar System. Two ungrouped achondrites – Northwest Africa (NWA) 11119 (andesite-dacite) and NWA 8486 and its pair NWA 7325 (olivine gabbro) – are the focus of this study, where their chronologies are investigated using multiple high-resolution techniques. Here we report the lead-lead (207Pb-206Pb) and manganese-chromium (53Mn-53Cr) systematics of NWA 11119, as well as the 207Pb-206Pb systematics of NWA 8486 alongside aluminum-magnesium (26Al-26Mg) systematics for NWA 7325. The U-corrected 207Pb-206Pb ages of NWA 11119 and the combined ages of NWA 7325/8486 are 4566.4 ± 0.8 Ma and 4563.8 ± 1.9 Ma, respectively. Additionally, we report the 53Mn-53Cr age of NWA 11119 to be 4564.4 ± 2.5 Ma and the 26Al-26Mg age of NWA 7325/8486 to be 4563.1 ± 0.3 Ma. The formation of NWA 11119 requires partial melting of a (likely chondritic) source reservoir leading to eruption of Si rich, alkali depleted magmas, while NWA 7325/8486 likely formed from a chemically fractionated reservoir with superchondritic Al/Mg. The clear geochemical and isotopic similarities of these achondrites, combined with the chronology reported here, is suggestive of formation of these two ungrouped achondrites on a common parent body which likely formed in the inner Solar System and experienced early differentiation under reducing conditions. If these achondrites did share a parent body, it would suggest that primary asteroids in the early Solar System commonly produced mineralogically and geochemically heterogeneous crusts. While mineralogical and geochemical heterogeneity is known to exist in the (mostly mafic) crust of asteroid Vesta, our findings show that even more significant crustal heterogeneity (representing felsic and mafic compositions) may exist on other asteroids.

Cartwright, Julia [University of Leicester, UK]↗

Tumor Heterogeneity of FIGO Stage III Carcinoma of the Uterine Cervix

Purpose: The purpose of this study was to analyze tumor heterogeneity based on tumor extent and suggest reappraisal of the system of the International Federation of Gynecology and Obstetrics (FIGO) for Stage III carcinoma of the uterine cervix from a radiotherapeutic viewpoint. Methods and Materials: Between 1986 and 2004, 407 patients with FIGO Stage III (FIGO Stage IIIa in 19 and IIIb in 388) were treated with external beam radiotherapy (RT) and high-dose rate brachytherapy. All patients were reviewed with respect to tumor extent. Patterns of failure and survival parameters were analyzed by use of the chi{sup 2} test and Kaplan-Meier method. Results: The complete response rate was 79.6%, and the 5-year overall survival rates for Stage IIIa and Stage IIIb carcinoma of the cervix were 82.1% and 54.8%, respectively. To determine which parameters of tumor extent had an influence on prognosis for Stage IIIb patients, pelvic wall (PW) extension and hydronephrosis (HD) retained significance on multivariate analysis. Stage IIIb patients were divided into three subgroups according to PW extension and HD: low risk (unilateral PW extension without HD), intermediate risk (HD without PW extension or bilateral PW extension without HD), and high risk (unilateral or bilateral PW extension with HD). The high-risk group had a remarkably low complete response rate, high locoregional failure rate, and low 5-year survival rate compared with the intermediate- and low-risk groups. Conclusions: FIGO Stage III carcinoma of the cervix covers considerably heterogeneous subgroups according to tumor extent. Before initiation of treatment, we suggest that physicians determine a tailored treatment policy based on tumor heterogeneity for each Stage III patient.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Algorithms Used in Heterogeneous Dose Calculations Show Systematic Differences as Measured With the Radiological Physics Center's Anthropomorphic Thorax Phantom Used for RTOG Credentialing

Purpose: To determine the impact of treatment planning algorithm on the accuracy of heterogeneous dose calculations in the Radiological Physics Center (RPC) thorax phantom. Methods and Materials: We retrospectively analyzed the results of 304 irradiations of the RPC thorax phantom at 221 different institutions as part of credentialing for Radiation Therapy Oncology Group clinical trials; the irradiations were all done using 6-MV beams. Treatment plans included those for intensity-modulated radiation therapy (IMRT) as well as 3-dimensional conformal therapy (3D-CRT). Heterogeneous plans were developed using Monte Carlo (MC), convolution/superposition (CS), and the anisotropic analytic algorithm (AAA), as well as pencil beam (PB) algorithms. For each plan and delivery, the absolute dose measured in the center of a lung target was compared to the calculated dose, as was the planar dose in 3 orthogonal planes. The difference between measured and calculated dose was examined as a function of planning algorithm as well as use of IMRT. Results: PB algorithms overestimated the dose delivered to the center of the target by 4.9% on average. Surprisingly, CS algorithms and AAA also showed a systematic overestimation of the dose to the center of the target, by 3.7% on average. In contrast, the MC algorithm dose calculations agreed with measurement within 0.6% on average. There was no difference observed between IMRT and 3D CRT calculation accuracy. Conclusion: Unexpectedly, advanced treatment planning systems (those using CS and AAA algorithms) overestimated the dose that was delivered to the lung target. This issue requires attention in terms of heterogeneity calculations and potentially in terms of clinical practice.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A high-order multiscale finite-element method for time-domain elastic wave modeling in strongly heterogeneous media

Efficient and accurate numerical methods for elastic wave modeling in complex media have many important applications. However, it is fairly challenging to model elastic wave propagation in strongly heterogeneous media with high computational efficiency and high-order accuracy simultaneously. We develop a novel high-order multiscale finite-element method to model elastic wave propagation in strongly heterogeneous media in the time domain. The most important feature of our method is a generalization of standard multiscale finite element method by using high-order multiscale finite-element basis functions to capture the fine-scale heterogeneities on the coarse mesh, in contrast to conventional finite-element basis functions that are merely determined by the order of polynomials. These multiscale basis functions leads to a system matrix with significantly reduced dimension, thus enable us to solve the elastic wave equation on the coarse mesh with high-order accuracy and very low computational time cost. In conclusion, we use 2D and 3D numerical examples to demonstrate the superior efficiency and accuracy of our new modeling method compared with the conventional spectral-element method.

58 GEOSCIENCES↗

Influences of granular constraints and surface effects on the heterogeneity of elastic, superelastic, and plastic responses of polycrystalline shape memory alloys

Deformation heterogeneities at the microstructural length-scale developed in polycrystalline shape memory alloys (SMAs) during superelastic loading are studied using both experiments and simulations. In situ X-ray diffraction, specifically the far-field high energy diffraction microscopy (ff-HEDM) technique, was used to non-destructively measure the grain-averaged statistics of position, crystal orientation, elastic strain tensor, and volume for hundreds of austenite grains in a superelastically loaded nickel-titanium (NiTi) SMA. These experimental data were also used to create a synthetic microstructure within a finite element model. The development of intragranular stresses were then simulated during tensile loading of the model using anisotropic elasticity. Driving forces for phase transformation and slip were calculated from these stresses. The grain-average responses of individual austenite crystals examined before and after multiple stress-induced transformation events showed that grains in the specimen interior carry more axial stress than the surface grains as the superelastic response "shakes down". Examination of the heterogeneity within individual grains showed that regions near grain boundaries exhibit larger stress variation compared to the grain interiors. As a result, this intragranular heterogeneity is more strongly driven by the constraints of neighboring grains than the initial stress state and orientation of the individual grains.

36 MATERIALS SCIENCE↗

Synthesis and characterization of mangenese(III) porphyrin supported on imidazole modified chloromethylated MIL-101(Cr): A heterogeneous and reusable catalyst for oxidation of hydrocarbons with sodium periodate

In the present work, chloromethylated MIL-101(Cr) modified with imidazole, Im-MIL-101, was applied as a support for immobilizing of tetraphenylporphyrinatomangenese(III) chloride. The imidazole-bound MIL-101, Im-MIL-101, not only used as support for immobilization of manganese porphyrin but also applied as a heterogeneous axial base. The Mn(TPP)Cl@Im-MIL-101 catalyst was characterized by UV–vis, FT-IR, X-ray diffraction (XRD), N{sub 2} adsorption, field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDX), elemental analysis and inductively coupled plasma (ICP) methods. The catalytic activity of this new catalytic system was investigated in the alkene epoxidation and alkane hydroxylation using NaIO{sub 4} as an oxidant in CH{sub 3}CN/H{sub 2}O at room temperature. This heterogeneous catalyst is highly efficient, stable and reusable in the oxidation of hydrocarbons. - Highlights: • MIL-101 was modified by covalent post synthetic modification. • Mn(TPP)Cl was anchored to imidazole modified MIL-101 by covalent attachment. • A heterogeneous catalyst was prepared. • The catalyst was used for epoxidation of alkenes and hydroxylation of alkanes. • The catalyst was reusable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals

Metals can be processed to reach ultra-high strength, but usually at a drastic loss of ductility. Here, we review recent advances in overcoming this tradeoff, by purposely deploying heterogeneous nanostructures in an otherwise single-phase metal. Several structural designs are being explored, including bimodal, harmonic, lamellar, gradient, domain-dispersed, and hierarchical nanostructures. These seemingly distinct tactics share a unifying design principle in that the intentional structural heterogeneities induce non-homogeneous plastic deformation, and the nanometer-scale features dictate steep strain gradients, thereby enhancing strain hardening and consequently uniform tensile ductility at high flow stresses. Moreover, these heterogeneous nanostructures in metals play a role similar to multiple phases in complex alloys, functionally graded materials and composites, sharing common material design and mechanics principles. Our review advocates this broad vision to help guide future innovations towards a synergy between high strength and high ductility, through highlighting several recent designs as well as identifying outstanding challenges and opportunities.

36 MATERIALS SCIENCE↗

Experimental validation of heterogeneity-corrected dose-volume prescription on respiratory-averaged CT images in stereotactic body radiotherapy for moving tumors

The purpose of this study was to experimentally assess the validity of heterogeneity-corrected dose-volume prescription on respiratory-averaged computed tomography (RACT) images in stereotactic body radiotherapy (SBRT) for moving tumors. Four-dimensional computed tomography (CT) data were acquired while a dynamic anthropomorphic thorax phantom with a solitary target moved. Motion pattern was based on cos (t) with a constant respiration period of 4.0 sec along the longitudinal axis of the CT couch. The extent of motion (A{sub 1}) was set in the range of 0.0-12.0 mm at 3.0-mm intervals. Treatment planning with the heterogeneity-corrected dose-volume prescription was designed on RACT images. A new commercially available Monte Carlo algorithm of well-commissioned 6-MV photon beam was used for dose calculation. Dosimetric effects of intrafractional tumor motion were then investigated experimentally under the same conditions as 4D CT simulation using the dynamic anthropomorphic thorax phantom, films, and an ionization chamber. The passing rate of {gamma} index was 98.18%, with the criteria of 3 mm/3%. The dose error between the planned and the measured isocenter dose in moving condition was within {+-} 0.7%. From the dose area histograms on the film, the mean {+-} standard deviation of the dose covering 100% of the cross section of the target was 102.32 {+-} 1.20% (range, 100.59-103.49%). By contrast, the irradiated areas receiving more than 95% dose for A{sub 1} = 12 mm were 1.46 and 1.33 times larger than those for A{sub 1} = 0 mm in the coronal and sagittal planes, respectively. This phantom study demonstrated that the cross section of the target received 100% dose under moving conditions in both the coronal and sagittal planes, suggesting that the heterogeneity-corrected dose-volume prescription on RACT images is acceptable in SBRT for moving tumors.

61 RADIATION PROTECTION AND DOSIMETRY↗

Actinide destruction and power peaking analysis in a 1000 MWt advanced burner reactor using moderated heterogeneous target assemblies

The purpose of this research was to determine the effect of moderated heterogeneous subassemblies located in the core of a sodium-cooled fast reactor on minor actinide (MA) destruction rates over the lifecycle of the core. Additionally, particular emphasis was placed on the power peaking of the pins and the assemblies with the moderated targets as compared to standard unmoderated heterogeneous targets and a core without MA targets present. Power peaking analysis was performed on the target assemblies and on the fuel assemblies adjacent to the targets. The moderated subassemblies had a marked improvement in the overall destruction of heavy metals in the targets. The design with acceptable power peaking results had a 12.25% greater destruction of heavy metals than a similar ex-core unmoderated assembly. The increase in minor actinide destruction was most evident with americium where the moderated assemblies reduced the initial amount to less than 3% of the initial loading over a period of five years core residency. In order to take advantage of the high minor actinide destruction and minimize the power peaking effects, a hybrid scenario was devised where the targets resided ex-core in a moderated assembly for the first 506.9 effective full power days (EFPDs) and were moved to an in-core arrangement with the moderated targets removed for the remainder of the lifecycle. The hybrid model had an assembly and pin power peaking of less than 2.0 and a higher heavy metal and minor actinide destruction rate than the standard unmoderated heterogeneous targets either in-core or ex-core. The hybrid model has a 54.5% greater Am reduction over the standard ex-core model. It also had a 27.8% greater production of Cm and a 41.5% greater production of Pu than the standard ex-core model. The radiotoxicity of the targets in the hybrid design was 20% less than the discharged standard ex-core targets.

99 GENERAL AND MISCELLANEOUS↗

Emergence and consequences of lateral sample heterogeneity in glow discharge spectrometry

We report conventional glow discharge emission or mass spectrometry requires the assumption that the surface of the sample is homogeneous. However, recent developments in glow discharge imaging appear to offer an opportunity to obtain three-dimensional concentration maps, in which this assumption is no longer necessary. Here, experiments, models, and a summary of earlier work are combined to examine the sputtering behavior of elemental and morphological heterogeneities in a sample. The theoretical model reveals gaps in current knowledge of glow discharge sputtering of heterogeneous samples, particularly indicating that heterogeneity in the sample leads to roughened crater bottoms and how additional morphology can evolve. Additionally, a three-dimensional profiling microscope is used to characterize the effects of surface inclusions on the sputtering process in a DC glow discharge in a reduced-pressure argon environment. Findings have important implications for bulk analysis, depth-profiling, and elemental surface mapping with glow discharge spectrometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterogeneous response of cancer-associated fibroblasts to the glucose deprivation through mitochondrial calcium uniporter

Highlights: • CAFs from a tumor mass are heterogeneous under the glucose deficient condition. • CAFs survive under glucose deficient condition by activation of TGF-β and calcium. • Calcium influx to mitochondria is critical for survival of glucose-deficient CAFs. • MCU in CAFs could be a feasible target for the development of anticancer drugs. Cancer-associated fibroblasts (CAFs) are an abundant component of the tumor microenvironment and have distinct features from normal fibroblasts (NFs). However, the discriminative nature of heterogeneous CAFs under glucose starvation remains unknown. In this study, we investigated the changes in the mitochondrial calcium concentration and relevant intracellular machinery in CAFs under glucose-deficient conditions. Xenografted tumor masses were dissected into multiple pieces and subjected to the CAF isolation using magnetically activated cell sorting (MACS). NFs were separated from the normal lung and skin. Under glucose starvation, CAFs from the tumor mass exhibited heterogeneity in cell proliferation, ATP production and calcium concentration. Compared to NFs, mitochondrial calcium concentration was significantly higher in glucose-starved CAFs with upregulation of mitochondrial calcium uniporter (MCU) that led to enhancement of ATP production and cell growth. Intriguingly, treatment of glucose-starved CAFs with oligomycin increased apoptosis by disrupted calcium homeostasis following overactivation of the mPTP. Moreover, oligomycin-induced apoptosis was mitigated by calcium chelation. This study demonstrated that the discriminative calcium influx to mitochondria through MCU coordinated cell growth and apoptosis in glucose-starved CAFs but not in NFs.

60 APPLIED LIFE SCIENCES↗

Influence of heterogeneity on second-kind self-similar solutions for viscous gravity currents

We report experimental, theoretical and numerical results on the effects of horizontal heterogeneities on the propagation of viscous gravity currents. We use two geometries to highlight these effects: (a) a horizontal channel (or crack) whose gap thickness varies as a power-law function of the streamwise coordinate; (b) a heterogeneous porous medium whose permeability and porosity have power-law variations. We demonstrate that two types of self-similar behaviours emerge as a result of horizontal heterogeneity: (a) a first-kind self-similar solution is found using dimensional analysis (scaling) for viscous gravity currents that propagate away from the origin (a point of zero permeability); (b) a second-kind self-similar solution is found using a phase-plane analysis for viscous gravity currents that propagate toward the origin. These theoretical predictions, obtained using the ideas of self-similar intermediate asymptotics, are compared with experimental results and numerical solutions of the governing partial differential equation developed under the lubrication approximation. All three results are found to be in good agreement.

42 ENGINEERING↗

Unstable turbulent channel flow response to spanwise-heterogeneous heat fluxes: Prandtl's secondary flow of the third kind

Turbulent secondary flows are defined as Prandtl's secondary flow of the first or second kind, the former produced by stretching and/or tilting of vorticity, the latter produced via spatial heterogeneity of Reynolds stresses. Both mechanisms are instantaneously active within inertia-dominated wall turbulence; Reynolds stress spatial heterogeneity is required for Reynolds-averaged secondary flows. Spanwise-variable surface roughness can induce turbulent stress spatial heterogeneity in the spanwise–wall-normal plane and provide sustenance for streamwise-aligned mean secondary flows. Herein, we demonstrate that turbulent secondary flows can also be sustained by spanwise variability in the surface heat flux in unstably stratified turbulent channels, defined hereafter as Prandtl's secondary flow of the third kind. Support for this mechanism is established with scaling arguments, while large-eddy simulation is used to model inertia-dominated channel turbulence responding to a lower boundary with uniform aerodynamic/hydrodynamic roughness but spanwise-variable surface heat flux. Transport equations for streamwise vorticity and turbulent kinetic energy, k, outline the conditions needed for third-kind production: shear and buoyancy production over the elevated heat flux regions necessitates lateral entrainment of low- k fluid, inducing mean counter-rotating secondary cells aligned such that upwelling and downwelling occur over the high and low heat flux regions, respectively. Buoyancy-driven production of k alters aggregate flow response and thus is a distinctly different mechanism responsible for sustenance of secondary flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Isotopic Heterogeneity Imaged in a Uranium Fuel Pellet with Extreme Ultraviolet Laser Ablation and Ionization Time-of-Flight Mass Spectrometry

We use extreme ultraviolet laser ablation and ionization time-of-flight mass spectrometry (EUV TOF) to map uranium isotopic heterogeneity at the nanoscale (=100 nm). Using low-enriched uranium fuel pellets that were made by blending two isotopically distinct feedstocks, we show that EUV TOF can map the 235U/238U content in 100 nm-sized pixels. The two-dimensional (2D) isotope maps reveal U ratio variations in sub-microscale to =1 µm areas of the pellet that had not been fully exposed by microscale or bulk mass spectrometry analyses. Compared to the ratio distribution measured in a homogeneous U reference material, the ratios in the enriched pellet follow a ~3× wider distribution. These results indicate U heterogeneity in the fuel pellet from incomplete blending of the different source materials. EUV TOF results agree well with those obtained on the same enriched pellets by nanoscale secondary ionization mass spectrometry (NanoSIMS), which reveals a comparable U isotope ratio distribution at the same spatial scale. EUV TOF’s ability to assess and map isotopic heterogeneity at the nanoscale makes it a promising tool in fields such as nuclear forensics, geochemistry, and biology that could benefit from uncovering sub-microscale sources of chemical modifications.

Rush, Lydia A.↗

Calcination Heterogeneity in Li-Rich Layered Oxides: A Systematic Study of Li 2 CO 3 Particle Size

Li- and Mn-rich (LMR) layered oxide positive-electrode materials exhibit high energy density and have earth-abundant compositions relative to conventional Ni-, Mn-, and Co-oxides (NMCs). The lithiation of coprecipitated precursors is a key part of the synthesis and offers opportunities for tuning the properties of LMR materials. Whereas the morphology of transition metal precursors has received substantial attention, that of Li sources has not. Using Li 1.14 Mn 0.57 Ni 0.29 O 2 as a model system, in this work, we establish a detailed understanding of LMR calcination pathways via in situ and ex situ diffraction, spectroscopy, microscopy, and thermogravimetry. Our work shows that a large Li 2 CO 3 particle size modulates a previously misunderstood thermogravimetric feature present at the Li 2 CO 3 melting point during layered oxide calcination and causes heterogeneity at larger length scales (inter-secondary particle) than previously reported (intra-secondary particle). We found that electrochemical performance is largely insensitive to this heterogeneity. Finally, this work highlights the sensitivity of layered oxide calcination pathways to synthesis conditions and suggests design rules to minimize calcination heterogeneity in layered oxides beyond LMR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dissolution Trapping of Carbon Dioxide in Heterogeneous Aquifers

The geologic architecture in sedimentary reservoirs affects the behavior of density-driven flow and the dispersion of CO 2 -rich brine. The spatial organization and connectivity of facies types play an important role. Low-permeability facies may suppress fingering and reduce vertical spreading, but may also increase transverse mixing. This is more pronounced when geologic structures create preferential flow pathways through connected facies types. Here, we perform high-resolution simulations of three-dimensional (3D) heterogeneous formations whose connectivity cannot be represented in two-dimensional models consistent with percolation theory. This work focuses on the importance of 3D facies-based heterogeneity and connectivity on advection-diffusion transport of dissolved CO 2 . Because the dissolution of CO 2 and the subsequent density increase of brine are the driving force for gravitational instabilities, we model the phase behavior with the accurate cubic-plus-association equation-of-state, which accounts for the self-association of polar water molecules and the cross-association between CO 2 and water. Our results elucidate how the spatial organization of facies affects the dynamics of CO 2 convective mixing. Scaling relations for the evolution of a global dispersion-width provide insights that can be universally applied. The results suggest that the long-term evolution and scaling of dispersion are surprisingly similar for homogeneous and (binary and multiscale) heterogeneous porous media.

42 ENGINEERING↗

Formation of Inorganic Sulfate and Volatile Nonsulfated Products from Heterogeneous Hydroxyl Radical Oxidation of 2-Methyltetrol Sulfate Aerosols: Mechanisms and Atmospheric Implications

Chemical transformation of 2-methyltetrol sulfates (2-MTS), key isoprene-derived secondary organic aerosol (SOA) constituents, through heterogeneous hydroxyl radical ( • OH) oxidation can result in the formation of previously unidentified atmospheric organosulfates (OSs). However, detected OSs cannot fully account for the sulfur content released from reacted 2-MTS, indicating the existence of sulfur in forms other than OSs, such as inorganic sulfates. This work investigated the formation of inorganic sulfates through heterogeneous • OH oxidation of 2-MTS aerosols. Remarkably, high yields of inorganic sulfates, defined as the moles of inorganic sulfates produced per mole of reacted 2-MTS, were observed in the range from 0.48 ± 0.07 to 0.68 ± 0.07. These could be explained by the production of sulfate (SO 4 •- ) and sulfite (SO 3 •- ) radicals through the cleavage of C-O(S) and (C)O-S bonds, followed by aerosol-phase reactions. Additionally, non-sulfated products resulting from bond cleavage were likely volatile and evaporated into gas phase, as evidenced by observed aerosol mass loss (up to 25%) and concurrent size reduction upon oxidation. This investigation highlights the significant transformation of sulfur from its organic to inorganic forms during the heterogeneous oxidation of 2-MTS aerosols, potentially influencing the physicochemical properties and environmental impacts of isoprene-derived SOA.

54 ENVIRONMENTAL SCIENCES↗