Search NASA⌕ Search

SEARCH · Search NASA

Results for “Infrared techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Differences in the hemodynamic response to event-related motor and visual paradigms as measured by near-infrared spectroscopy

Several current brain imaging techniques rest on the assumption of a tight coupling between neural activity and hemodynamic response. The nature of this neurovascular coupling, however, is not completely understood. There is some evidence for a decoupling of these processes at the onset of neural activity, which manifests itself as a momentary increase in the relative concentration of deoxyhemoglobin (HbR). The existence of this early component of the hemodynamic response function, however, is controversial, as it is inconsistently found. Near infrared spectroscopy (NIRS) allows quantification of levels of oxyhemoglobin (HbO(2)) and HbR during task performance in humans. We acquired NIRS data during performance of simple motor and visual tasks, using rapid-presentation event-related paradigms. Our results demonstrate that rapid, event-related NIRS can provide robust estimates of the hemodynamic response without artifacts due to low-frequency signal components, unlike data from blocked designs. In both the motor and visual data the onset of the increase in HbO(2) occurs before HbR decreases, and there is a poststimulus undershoot. Our results also show that total blood volume (HbT) drops before HbO(2) and undershoots baseline, raising a new issue for neurovascular models. We did not find early deoxygenation in the motor data using physiologically plausible values for the differential pathlength factor, but did find one in the visual data. We suggest that this difference, which is consistent with functional magnetic resonance imaging (fMRI) data, may be attributable to different capillary transit times in these cortices.

NASA Program Biomedical Research and Countermeasur↗

Experimental Determination of Infrared Extinction Coefficients of Interplanetary Dust Particles

This technique is based on irradiating a single isolated charged dust particle suspended in balance by an electric field, and measuring the scattered radiation as a function of angle. The observed scattered intensity profile at a specific wavelength obtained for a dust particle of known composition is compared with Mie theory calculations, and the variable parameters relating to the particle size and complex refractive index are adjusted for a best fit between the two profiles. This leads to a simultaneous determination of the particle radius, the complex refractive index, and the scattering and extinction coefficients. The results of these experiments can be utilized to examine the IRAS and DIRBE (Diffuse Infrared Background Experiment) infrared data sets in order to determine the dust particle physical characteristics and distributions by using infrared models and inversion techniques. This technique may also be employed for investigation of the rotational bursting phenomena whereby large size cosmic and interplanetary particles are believed to fragment into smaller dust particles.

Spann, J. F., Jr.↗

MXene Reinforced Thermosetting Composite for Lightning Strike Protection of Carbon Fiber Reinforced Polymer

Ti 3 C 2 – a member of the MXenes (2D transition metal carbides and nitrides) family, is investigated as an effective filler to improve the electrical, mechanical, and thermal properties of divinylbenzene (DVB) thermosetting resin. Consequently, its performance as a lightning strike protection (LSP) coating for carbon fiber reinforced polymer (CFRP) is evaluated. Polyaniline (PANI) – dodecylbenzene sulfonic acid (DBSA) complex is used to cure the DVB resin. The synergic effect of MXenes (with surface that is negatively charged) with polyaniline (positive charge) shows electrostatic bonding and improved electrical conductivity in the composite. We also find that the addition of MXenes at 2 wt% into the PANI-DVB composite shows ≈139%, 10%, and 9% improvement in electrical conductivity, flexural strength, and flexural modulus, respectively, compared to the neat PANI-DVB composite. The composites are investigated using various material characterization techniques including Fourier transforms infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and scanning electron microscopy. Furthermore, MXenes-DVB is utilized to create a conductive thermosetting coating on top of a CFRP substrate and tested against a lightning strike of 100 kA. CFRP with MXenes-DVB coating reduced the surface damage from 40.61 cm 2 (reference CFRP panel) to 13.29 cm 2 (CFRP coated with MXenes-DVB).

36 MATERIALS SCIENCE↗

Highly Efficient Separation/Recycling Palladium(II) Ions from Aqueous Solutions by Silica Gel-Coated Graphene Oxide Modified with Mercapto Groups

The separation and recovery of precious metals from secondary resources is an extremely important and challenging task. Herein, a novel sorbent is successfully prepared by chemical grafting and utilized for the extraction and separation of Pd(II) ions from aqueous solutions. Various characterization techniques, including Fourier transform infrared spectroscopy, scanning electron microscopy, Brunauer–Emmett–Teller, X-ray photoelectron spectroscopy, and element analysis, are employed to study the structure, morphology, porous nature, and chemical composition of the as-prepared SiO{sub 2}@GO-SH nanocomposites. The adsorption of Pd(II) ions on the SiO{sub 2}@GO-SH can be described by the pseudo-second-order model and Langmuir isotherm model. The adsorption equilibrium has been attained within 90 min and the maximum adsorption capacity of 423.2 mg g{sup −1} was attained at pH 3.5 and T = 308 K. The results reveal that SiO{sub 2}@GO-SH exhibits an excellent adsorption performance towards Pd(II) ions. In addition, we have proposed the adsorption mechanism for Pd(II) ions on the SiO{sub 2}@GO-SH surface. The adsorption of Pd(II) in SiO{sub 2}@GO-SH is a chemisorption process, where partial adsorbed Pd(II) ions are reduced to Pd(0) by functional groups (-SH) in the SiO{sub 2}@GO-SH. The results indicate that SiO{sub 2}@GO-SH can serve as a promising sorbent for the efficient separation and recovery of palladium from the palladium-containing secondary resources.

36 MATERIALS SCIENCE↗

CoTiO{sub 3} via cobalt oxalate-TiO{sub 2} precursor. Synthesis and characterization

Purely trigonal ilmenite type powder; CoTiO{sub 3} was successfully synthesized through the thermal decomposition of CoC{sub 2}O{sub 4}{center_dot}2H{sub 2}O-TiO{sub 2} precursor. The decomposition course was followed using differential thermal analysis-thermogravimetry measurements and the intermediate decomposition products as well as the titanate product were characterized using X-ray diffraction, Fourier transform infrared, transmission electron microscopy techniques. Thermal analysis study indicated that, the intermediate decomposition product; Co{sub 3}O{sub 4} decomposed endothermically into CoO at 963 Degree-Sign C with instantaneous formation of CoTiO{sub 3}. X-ray diffraction of the powder calcined at 950 Degree-Sign C showed characteristic lines for Co{sub 2}TiO{sub 4} besides secondary phase of rutile-TiO{sub 2}, which are disappeared by rising the calcination temperature to 1000 Degree-Sign C. Transmission electron microscopy image of CoTiO{sub 3} powder exhibit weak agglomerated particles with heterogeneous morphology in both shape and dimensions. Type II adsorption isotherm estimated using Brunauer-Emmett-Teller procedure indicated a very high specific surface area of 29.7 m{sup 2} g{sup -1}. Electrical properties of CoTiO{sub 3} measured as a function of temperature and frequency showed a semiconducting behavior at high temperatures with conduction activation energy of 0.73 eV. Kinetic analysis of the non-isothermal thermogravimetry curves, using different computational methods, illustrated that the random nucleation and growth mechanisms are the predominant one. - Graphical Abstract: The figure showed the variation of dielectric constant ({epsilon} Prime ) for CoTiO{sub 3} with temperature at different frequencies. {epsilon} Prime appeared to be temperature and frequency independent at low temperatures. By increasing the temperature, the orientation polarization plays a significant role and a gradual increase of {epsilon} Prime occurred. Highlights: Black-Right-Pointing-Pointer CoTiO{sub 3} was synthesized through decomposition of CoC{sub 2}O{sub 4}{center_dot}2H{sub 2}O-TiO{sub 2} precursor. Black-Right-Pointing-Pointer XRD, FT-IR, TEM techniques are used to characterize decomposition course. Black-Right-Pointing-Pointer Specific surface area of 29.7 m{sup 2} g{sup -1} was obtained. Black-Right-Pointing-Pointer The prepared titanate showed semiconducting behavior.

36 MATERIALS SCIENCE↗

Surface modification of superparamagnetic iron nanoparticles with calcium salt of poly({gamma}-glutamic acid) as coating material

Surface-modified magnetite nanoparticles (MNPs) were synthesized by co-precipitation of aqueous solution of ferrous and ferric salts (molar ratio 1:2) upon adding a base followed by calcium salt of poly({gamma}-glutamic acid) (Ca-{gamma}-PGA) for uniform coating on the surface of MNPs. Both uncoated and Ca-{gamma}-PGA-coated MNPs were characterized using various techniques including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA) and vibrating sample magnetometric (VSM) studies. Compared with bare MNPs, the IR spectra of coated MNPs showed characteristic peaks of {gamma}-PGA, implying the {gamma}-PGA coating on MNPs did occur. The TEM images depicted an average size of 8-10 nm for bare MNPs and 14 nm for coated MNPs, with their shape being spherical in nature. In the presence of applied magnetic field, a superparamagnetic behavior was observed at room temperature for both bare and Ca-{gamma}-PGA-coated MNPs, with no magnetism left upon magnetic-field removal.

36 MATERIALS SCIENCE↗

Condition assessment of cable insulation materials in advanced reactor environments

While existing cable insulation materials are sufficient for use in the current reactor fleet, environmental conditions inside some advanced reactors, such as small modular reactors, will be substantially harsher. The work herein was conducted to assess the performance and overall survivability of several high-temperature, radiation resistant insulation polymers in a simulated small modular reactor environment. The materials evaluated under this research include polyether ether ketone, polyimide, and silicone rubber. These polymers were subjected to 1000 h of environmental stress exposure under two different conditions: 1) high temperature (i.e., 250 °C) in atmospheric pressure and 2) high temperature in a low-pressure vacuum (i.e., less than 2 psia). During the environmental exposure process, each insulation was periodically tested using several materials characterization techniques including Fourier transform infrared spectroscopy, oxidation induction time, and oxidation induction temperature. The objective of this testing was to assess and monitor changes that occurred in the thermal and chemical properties of the materials during the environmental exposures. The overall survivability of each insulation was assessed based on these property changes. The results of this research revealed that the polyimide and polyether ether ketone insulations had significantly better thermal and chemical stability than the silicone rubber during both the high-temperature atmospheric and vacuum exposures. Both polyimide and polyether ether ketone experienced minimal reductions in their chemical and thermal properties over the course of 1000 h in the simulated environments. Finally, based on this research, polyimide and polyether ether ketone show promise as potential base materials for small modular reactor cable insulation.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Pressure–Temperature Phase Diagram Reveals Spin–Lattice Interactions in Co[N(CN) 2 ] 2

Diamond anvil cell techniques, synchrotron-based infrared and Raman spectroscopies, and lattice dynamics calculations are combined with prior magnetic property work to reveal the pressure–temperature phase diagram of Co[N(CN)2]2. The second-order structural boundaries converge on key areas of activity involving the spin state exposing how the pressure-induced local lattice distortions trigger the ferromagnetic → antiferromagnetic transition in this quantum material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Utilizing Quantum Cascade Lasers for Ultranarrow Velocity Resolution and Quantum-State Selectivity in Molecular Beam Scattering and Spectroscopy

Here, we demonstrate the capability of a narrow linewidth quantum cascade laser (QCL) to selectively excite a very narrow velocity range of nitric oxide (σ ≤ 7(3) m/s) with a pure ro-vibrational quantum state. By implementing a counter-propagating geometry, the molecules are selectively excited according to the Doppler shift of the ro-vibrational transition frequency such that the velocity width associated with the excited molecules depends only on the QCL linewidth. We demonstrate a velocity distribution limited by the effective linewidth of our free-running QCL (Γ = 3.2 MHz). Our development provides a cost-effective, flexible approach to resolve quantum-state selective chemical dynamics with excellent velocity resolution in a wide variety of molecules with infrared-active transitions. This technique has been formulated to provide ultrahigh collisional energy resolution in molecular beams to delineate final quantum-state product pairs in studies of molecular collisions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantifying Size Effects on Thermal Transport in CsPbBr 3 Nanocrystal Films

Colloidal lead halide perovskite nanocrystals (LHP NCs) are promising semiconductor materials for optoelectronic applications due to their strong quantum confinement, near-unity photoluminescence quantum yields, and tunable emission characteristics. However, their modest thermal stability remains a challenge, particularly at smaller core diameters due to enhanced phonon scattering at inorganic core-organic ligand interfaces. In this work, we directly quantify size-dependent thermal conductivity (κ) in lecithin-capped CsPbBr 3 NC thin films using a transducer-free, vibrational pump–visible probe (VPVP) spectroscopy technique. A mid-infrared pump thermally excites the ligand shell, while a broadband probe tracks transient reflectance change correlated to lattice temperature decay. Finite-element modeling of the decay dynamics yields κ values from 0.13 to 0.16 W·m –1 ·K –1 for NC films with sub-10 nm core diameter, significantly lower than those of its bulk counterpart. A steep κ suppression with decreasing NC size emphasizes the dominant role of ligand shells and boundary effects in thermal transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning Solid Electrolyte Interphase Formation before Plating Onset in Anode-Free Sodium Batteries

Sodium (Na) batteries are of growing interest due to the higher earth abundance of sodium than lithium, as well as their promising theoretical energy density when metallic Na anodes are used. However, Na plating and stripping are heavily influenced by the physicochemical properties of the solid electrolyte interphase (SEI), which is directly influenced by the solvent and salt used for the electrolyte. While most studies focus on the SEI that forms on the surface of Na metal after plating, we expand this analysis by identifying a nanoscale “pre-plating” SEI that forms on the current collector (CC) prior to the onset of Na plating. Here, we systematically investigate an array of Na salt and glyme solvents in the electrolyte and determine the associated impacts on pre-plating SEI formation on aluminum CCs. By combining analytical electrochemistry approaches with a multimodal suite of spectroscopy techniques (X-ray, infrared, and Raman), supported by density functional theory calculations, we reveal a direct correlation between the Na + coordination environment and pre-plating SEI composition. We find that longer-chain glymes produce larger proportions of organic alkoxide products in the interphase, consistent with increased Na + −glyme interactions, while the fraction of salt-derived inorganic products (e.g., NaF) correlates with Na + −anion coordination. These insights highlight the critical influence of electrolyte composition particularly solvent identity and Na + coordination on the initial SEI formation in anode-free Na batteries.

anode-free batteries↗

Comparison of Daytime Low-Level Cloud Properties Derived From GOES and ARM SGP Measurements

Large-scale satellite data are critical for both verifying and improving general circulation model parameterizations of clouds and radiation for climate prediction. For reliable application of satellite data sets in cloud processes and climate models, it is important to have a reasonable estimate of the errors in the derived cloud properties. The daytime single-layered low-level cloud properties retrieved by the Geostationary Operational Environmental Satellite system (GOES) are compared with ground-based observations and retrievals over the Department of Energy Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) Central Facility from June 1998 to December 2006. The GOES retrievals are made via the Visible-Infrared Solar-infrared Split-window Technique. They are spatially averaged within a 0.15° × 0.15° box centered on the ARM SGP site, and the ARM surface observations are temporally averaged ±15 min around the GOES scans to produce collocated pairs. Comparisons are made for monthly means, diurnal means, and one-to-one GOES and ARM collocated pairs. GOES T eff is highly correlated with ARM T top cloud temperature, having an R 2 value of 0.75, though GOES exhibits a cold bias. GOES-retrieved τ and liquid water path have very good agreement with ARM retrievals with R 2 s of 0.45 and 0.47, while r e (GOES), on average, is about 2 μm greater than ARM r e . An examination of solar and viewing geometry has shown that GOES-retrieved mean r e and τ values are impacted by solar zenith angle and especially scattering angle, which is not unexpected and needs to be accounted for by users.

54 ENVIRONMENTAL SCIENCES↗

Optimizing semi-hydrogenation of unsaturated hydrocarbons by electrolyte engineering approach

Electrochemical hydrogenation of unsaturated hydrocarbons, when powered by renewables, represents a unique opportunity to substitute current energy-intensive synthetic routes. Modulation of adsorption energies of the organic substrate and key intermediates of the reaction is critical for fine tuning of the yield, selectivity and kinetics of the reaction. Interestingly, mounting evidence exists regarding the role of electrolyte composition in the outcome of semi-hydrogenation reactions. Nevertheless, electrolyte optimization is a complex task, owing to its hybrid nature. Indeed, it is composed of water serving as a proton source, an organic solvent necessary to dissolve the organic substrate and a conducting salt. Herein, we demonstrate that varying conducting salt and organic solvent has a dramatic impact on the outcomes of semi-hydrogenation of alkynes. By varying salt and water concentrations, we demonstrate that water does not serve as a proton source, and instead addition of an acid is necessary. While increasing the acid concentration increases the yield of the reaction, at too large concentrations the hydrogen evolution reaction becomes predominant. Furthermore, by combining electrochemical measurements with spectroscopic techniques including Fourier transform infrared (FTIR) spectroscopy and small angle X-ray spectroscopy (SAXS), we demonstrate that the electrolyte solvation structure dramatically impacts the yield of the reaction. Organic solvents weakly interacting with water, including acetonitrile, form aqueous nanoheterogeneities that prevent the organic substrate from accessing the catalyst interface and thus lead to limited yields. Instead, solvents such as dimethylformamide form homogeneous mixtures with which all reactants can access the interface, leading to yields greater than 80% for optimized compositions.

Zhang, Rongyu↗

Visible light photocatalytic property of Zn doped V{sub 2}O{sub 5} nanoparticles

The Zn doped V{sub 2}O{sub 5} nanoparticles were synthesized by thermal decomposition method. The prepared samples were characterized by various techniques like Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) studies, UV-Visible spectroscopy (UV-Vis) and field emission scanning electron microscopy (FE-SEM). The photocatalytic activities of pure and Zn doped V{sub 2}O{sub 5} nanoparticles were examined based on the photodegradation of Rhodamine B (RhB). Experimental results indicated that the Zn doped V{sub 2}O{sub 5} photocatalyst (the molar ratio of V to Zn is 99: 1) exhibited maximum photocatalytic activity.

36 MATERIALS SCIENCE↗

Structure of the runaway electron loss during induced disruptions in TEXTOR

The loss of runaway electrons during an induced disruption is recorded by a synchrotron imaging technique using a fast infrared CCD camera. The loss is predominantly diffuse. During the “spiky-loss phase”, when the runaway beam moves close to the wall, a narrow channel between the runaway column and a scintillator probe is formed and lasts until the runaway beam is terminated. In some cases, the processed images show a stripe pattern at the plasma edge. A comparison between the MHD dominated disruptions and the MHD-free disruption is performed. A new mechanism of plasma disruptions with the runaway electron generation and a novel model which reproduces many characteristic features of the plasma beam evolution during a disruption is briefly described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Photochemistry sample sticks for inelastic neutron scattering

Every material experiences atomic and molecular motions that are generally termed vibrations in gases and liquids or phonons in solid state materials. Optical spectroscopy techniques, such as Raman, infrared absorption spectroscopy, or inelastic neutron scattering (INS), can be used to measure the vibrational/phonon spectrum of ground state materials properties. A variety of optical pump probe spectroscopies enable the measurement of excited states or elucidate photochemical reaction pathways and kinetics. So far, it has not been possible to study photoactive materials or processes in situ using INS due to the mismatch between neutron and photon penetration depths, differences between the flux density of photons and neutrons, cryogenic temperatures for INS measurements, vacuum conditions, and a lack of optical access to the sample space. These experimental hurdles have resulted in very limited photochemistry studies using INS. Here we report on the design of two different photochemistry sample sticks that overcome these experimental hurdles to enable in situ photochemical studies using INS, specifically at the VISION instrument at Oak Ridge National Laboratory. We demonstrate the use of these new measurement capabilities through (1) the in situ photodimerization of anthracene and (2) the in situ photopolymerization of a 405 nm photoresin using 405 nm excitation as simple test cases. Furthermore, these new measurement apparatus broaden the science enabled by INS to include photoactive materials, optically excited states, and photoinitiated reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of 2-hydroxy-pyridine modified Group 4 alkoxides

Here, the reaction of Group 4 metal alkoxides ([M(OR) 4 ]) with the potentially bidentate ligand, 2-hydroxy-pyridine (2-HO-(NC 5 H 4 ) or H-PyO), led to the isolation of a family of compounds. The products isolated from the reaction of [M(OR) 4 ] [where M = Ti, Zr, or Hf; OR = OPri (OCH(CH 3 ) 2 ), OBut (OC(CH3)3), or ONep (OCH2C(CH3)3] under a variety of stoichiometries with H-PyO were identified by single crystal X-ray diffraction as [(OPr i ) 2 (PyO-κ 2 (O,N))Ti(μ-OPr i )] 2 , [(ONep) 2 Ti(μ(O)-PyO-κ 2 (O,N)) 2 (μ-ONep)Ti(ONep)3], [(ONep) 2 Ti(μ(O)-PyO-κ 2 (O,N))(η 1 (N),μ(O)-PyO)(μ-O)Ti(ONep) 2 ] 2 , [H][(PyO-κ 2 (O,N))(η 1 (O)-PyO)Ti(ONep) 3 ], [(OR) 2 Zr(μ(O)-PyO-κ 2 (O,N)) 2 (μ-OR)Zr(OR) 3 ] (OR = OBu t , ONep), [(OR) 2 Zr(μ(O,N)-PyO-κ 2 (O,N)) 2 (μ(O,N)-PyO)Zr(OR) 3 ] (OR = OBu t , ONep), [[(OBu t ) 2 Zr(μ(O)-PyO-(κ 2 (N,O))(μ(O,N)-PyO) 2 Zr(OBut)](μ 3 -O)] 2 , [[(ONep)(PyO-κ 2 (N,O))Zr(μ(O,N)-PyO-κ 2 (N,O)) 2 (μ(O)-PyO-κ2(N,O))Zr(ONep)](μ3-O)] 2 , [(OBut)(PyO-κ 2 (O,N))Zr(μ(O)-PyO-κ 2 (O,N)) 2 ((μ(O,N)-PyO)Zr(OBu t ) 3 ], [(OBu t )2Hf(μ(O)-PyO-κ 2 (N,O)) 2 (μ-OBut)Hf(OBut) 3 ], [(OR) 2 M(μ(O)-PyO-κ 2 (N,O)) 2 (μ(O,N)-PyO)M(OR) 3 ] (OR = OBu t , ONep), and [(ONep) 3 Hf(μ-ONep)(η 1 (N),μ(O)-PyO)] 2 Hf(ONep) 2 ·tol. The structural diversity of the binding modes of the PyO led to a number of novel structure types in comparison to other pyridine alkoxy derivatives. The majority of compounds adopt a dinuclear arrangement but oxo-based tetra-, tri-, and monomers were observed as well. Compounds 1–12 were further characterized using a variety of analytical techniques including Fourier Transform Infrared Spectroscopy, elemental analysis, and multinuclear NMR spectroscopy.

2-hydroxy pyridine↗

Large-volume centimeter-wave cavities for axion searches

The scan rate of an axion haloscope is proportional to the square of the cavity volume. In this paper, a new class of thin-shell cavities are proposed to search for axionic dark matter. These cavities feature active volume much larger (>20×) than that of a conventional cylindrical haloscope, comparable quality factor Q, and a similar frequency tuning range. Furthermore, full 3D numerical finite-element analyses have been used to show that the TM 010 eigenmodes are singly polarized throughout the volume of the cavity and can facilitate axion-photon conversion in uniform magnetic field produced by a superconducting solenoid. To mitigate spurious mode crowding and volume losses due to localization, a pre-amplification binary summing network will be used for coupling. Because of the favorable frequency-scaling, the new cavities are most suitable for centimeter-wavelength (~ 10–100 GHz), corresponding to the promising post-inflation axion production window. In this frequency range, the tight machining tolerances required for high-Q thin-shell cavities are achievable with standard machining techniques for near-infrared mirrors.

79 ASTRONOMY AND ASTROPHYSICS↗