Search NASA⌕ Search

SEARCH · Search NASA

Results for “Intact”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Delamination of Multilayer Plastic Films to Recover Polyethylene with Favorable Mechanical Properties

Multilayer plastic films play a critical role in packaging, with each polymer layer contributing specific properties to the multilayer film. Multilayer plastic films are not currently recyclable due to the bound polymers. With multilayer film production of about 20 million metric tons in 2024 and rising, endof- life treatment becomes pressing. This work presents a scalable solvent-based delamination recycling process that is applied to commercial postindustrial multimaterial films to unbind the materials within a multilayer film by dissolving only the adhesive layer and recover polyethylene (PE) as an intact solid film. Solventbased delamination is a simple process that allows the complete recovery of materials and solvents used in the process. The delaminating solvent, 88% formic acid in water, induces delamination of PE/PEI/PET and PE/PU/PET films at 70 °C in under an hour. Recovered PE has no contamination detected by Fourier transform infrared spectroscopy and mechanical properties on par with those of virgin resin. The recovery of high-quality solid PE film fit for reprocessing, at low operating temperatures and with closed-loop solvent reuse, promotes delamination as a low energy consumption and environmentally friendly recycling process. PE recovered from delamination can be reused in equivalent products, promoting circularity of multimaterial films.

chemical recycling↗
DOE OSTI2018

Metal–Organic Framework Supported Single Site Chromium(III) Catalyst for Ethylene Oligomerization at Low Pressure and Temperature

A chemically and thermally stable, mesoporous, crystalline metal–organic framework, NU-1000, serves as a structurally well-defined support for catalytic reactions. Depositing chromium(III), a metal widely used in homogeneous ethylene oligomerization catalysts, onto the Zr6 node of NU-1000 allows for the atomically precise determination of the structure of the Cr3+ catalyst through single-crystal X-ray diffraction studies. Chromium modification of NU-1000 was accomplished via solvothermal deposition in MOFs (SIM); termed Cr-SIM-NU-1000, the elaborated material features individual Cr atoms directed in single-site fashion into the mesopore of NU-1000. It was found that NU-1000 serves to stabilize the catalyst against both the typical chemical deactivation of homogeneous systems and leaching from heterogeneous systems. Cr-SIM-NU-1000 exhibits superior catalytic activity, as compared to Cr2O3, for ethylene oligomerization, with 20% conversion at a turnover frequency of about 60 h–1 and products ranging from C8–C28. Given that this catalysis occurs at low temperature (ambient) and low pressure (1 bar C2H4), along with minimal quantity of cocatalyst, the high activity shown by Cr-SIM-NU-1000 enables significant reduction in materials usage and waste. Postcatalytic characterization reveals Cr-SIM-NU-1000 remains intact with no leaching under the reaction conditions.

catalysis (heterogeneous), materials and chemistry↗
DOE OSTI2025

Robust Synthetic Biology Toolkit to Advance Carboxysome Study and Redesign

Carboxysomes are polyhedral protein organelles that microorganisms use to facilitate carbon dioxide assimilation. They are composed of a modular protein shell that envelops an enzymatic core mainly composed of physically coupled Rubisco and carbonic anhydrase. While the modular construction principles of carboxysomes make them attractive targets as customizable metabolic platforms, their size and complexity can be a hindrance. In this work, we design and validate a plasmid set, the pXpressome toolkit, in which α-carboxysomes are robustly expressed and remain intact and functional after purification. We tested this toolkit by introducing mutations that influence carboxysome structure and performance. We find that deletion of vertex-capping genes results in formation of larger carboxysomes, while deletion of facet forming genes produces smaller particles, suggesting that adjusting the ratio of these proteins can rationally affect morphology. Through a series of fluorescently labeled constructs, we observe that this toolkit leads to more uniform expression and better cell health than previously published carboxysome expression systems. Overall, the pXpressome toolkit facilitates the study and redesign of carboxysomes with robust performance and improved phenotype uniformity. The pXpressome toolkit will support efforts to remodel carboxysomes for enhanced carbon fixation or serve as a platform for other nanoencapsulation goals.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Engineering the S-Layer of Caulobacter crescentus as a Foundation for Stable, High-Density, 2D Living Materials

Materials synthesized by organisms, such as bones and wood, combine the ability to self-repair with remarkable mechanical properties. This multifunctionality arises from the presence of living cells within the material and hierarchical assembly of different components across nanometer to micron scales. While creating engineered analogs of these natural materials is of growing interest, our ability to hierarchically order materials using living cells largely relies on engineered 1D protein filaments. Here, we lay the foundations for bottom-up assembly of engineered living material composites in 2D along the cell body using a synthetic biology approach. We engineer the paracrystalline surface-layer (S-layer) of Caulobacter crescentus to display SpyTag peptides that form irreversible isopeptide bonds to SpyCatcher-modified proteins, nanocrystals, and biopolymers on the extracellular surface. Using flow cytometry and confocal microscopy, we show that attachment of these materials to the cell surface is uniform, specific, and covalent, and its density can be controlled based on the location of the insertion within the S-layer protein, RsaA. Furthermore, we leverage the irreversible nature of this attachment to demonstrate via SDS-PAGE that the engineered S-layer can display a high density of materials, reaching 1 attachment site per 288 nm 2 . Lastly, we show that ligation of quantum dots to the cell surface does not impair cell viability and this composite material remains intact over a period of two weeks. Taken together, this work provides a platform for self-organization of soft and hard nanomaterials on a cell surface with precise control over 2D density, composition, and stability of the resulting composite, and is a key step towards building hierarchically-ordered engineered living materials with emergent properties.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Structural Characterization of a Synthetic Tandem-Domain Bacterial Microcompartment Shell Protein Capable of Forming Icosahedral Shell Assemblies

Bacterial microcompartments are subcellular compartments found in many prokaryotes; they consist of a protein shell that encapsulates enzymes that perform a variety of functions. The shell protects the cell from potentially toxic intermediates and co-localizes enzymes for higher efficiency. Accordingly, it is of considerable interest for biotechnological applications. We have previously structurally characterized an intact 40 nm shell comprised of three different types of proteins. One of those proteins, BMC-H, forms a cyclic hexamer; here we have engineered a synthetic protein that consists of a tandem duplication of BMC-H connected by a short linker. The synthetic protein forms cyclic trimers that self-assemble to form a smaller (25 nm) icosahedral shell with gaps at the pentamer positions. When co-expressed in vivo with the pentamer fused to an affinity tag we can purify complete icosahedral shells. This engineered shell protein constitutes a minimal shell system to study permeability; reducing symmetry from six- to three-fold will allow for finer control of the pore environment. In conclusion, we have determined a crystal structure of this shell to guide rational engineering of this microcompartment shell for biotechnological applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Diffractive Imaging of Conical Intersections Amplified by Resonant Infrared Fields

The fate of virtually all photochemical reactions is determined by conical intersections. These are energetically degenerate regions of molecular potential energy surfaces that strongly couple electronic states, thereby enabling fast relaxation channels. Their direct spectroscopic detection relies on weak features that are often buried beneath stronger, less interesting contributions. For azobenzene photoisomerization, a textbook photochemical reaction, we demonstrate how a resonant infrared field can be employed during the conical intersection passage to significantly enhance its coherence signatures in time-resolved Xray diffraction while leaving the product yield intact. Furthermore, this transition-state amplification holds promise to bring signals of conical intersections above the detection threshold.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Interzeolite Transformation through Cross-Nucleation: A Molecular Mechanism for Seed-Assisted Synthesis

Polymorph selection and efficient crystallization are central goals in zeolite synthesis. Crystalline seeds are used for both purposes. While it has been proposed that zeolite seeds induce interzeolite transformation by dissolving into structural units that promote nucleation of the daughter crystal, the seed’s structural elements do not always match those of the target zeolite. This discrepancy raises the question of how the seed promotes the daughter phase. Here, we present the first molecularly resolved investigation of seed-assisted zeolite synthesis. Using molecular simulations, we reproduce the experimental finding that a parent zeolite can promote the nucleation of a daughter zeolite even when it lacks common composite building units (CBUs) or crystal planes. Modeling the seed-assisted synthesis of an AFI-type zeolite using zeolite CHA, our simulations indicate that stand-alone CBUs from the parent seed do not facilitate daughter crystal formation. However, introducing the intact seed significantly reduces the synthesis time, supporting that seed integrity is key to increased efficiency. This reduction arises from the cross-nucleation of the AFI-type zeolite on the CHA (001) face. We find that parent and daughter zeolites are connected by an interfacial transition layer with an order distinct from that of both zeolites. Simulations reveal that cross-nucleation occurs over a broad range of synthesis conditions. We argue that cross-nucleation would be most favorable for zeolite pairs that share crystalline planes such as those forming intergrowths. In conclusion, our findings suggest that the prevalence of intergrowths with a common lattice plane in zeolite synthesis is likely a kinetic effect of accelerated cross-nucleation.

Crystallization↗
DOE OSTI2025

Defect-Driven Redox Interplay on Anatase TiO 2 : Surface-Structure Dependent Activation for CO 2 Hydrogenation Catalysis

Titanium dioxide (TiO 2 ) is one of the most extensively studied oxides as an active catalyst or catalyst support, particularly in energy and environmental applications, but the atomistic mechanisms governing its dynamic response to reactive environments and their correlation to reactivity remain largely elusive. Using in situ environmental transmission electron microscopy (ETEM), synchrotron X-ray diffraction (XRD), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), temperature-programmed reduction (TPR), reactivity measurements, and theoretical modeling, we reveal the dynamic interplay between oxygen loss and replenishment of anatase TiO 2 under varying reactive conditions. Under H 2 exposure, anatase TiO 2 undergoes surface reduction via lattice oxygen loss, forming Ti 3 O 5 . In contrast, CO 2 exposure induces oxygen replenishment, reversing stoichiometry. In mixed H2/CO 2 environments, the reverse water–gas shift (RWGS) reaction proceeds selectively on stepped and high-indexed TiO 2 surfaces, whereas the thermodynamically stable TiO 2 (101) surface remains inactive and intact. Critically, H 2 pretreatment generates oxygen vacancies on TiO 2 (101), transforming it into an active Ti 3 O 5 or defect-rich surface that catalyzes RWGS. By correlating surface structure, defect dynamics, and gas-phase interactions, this work deciphers the competition between H 2 -driven reduction and CO 2 -driven oxidation pathways at the atomic scale. Furthermore, these insights establish defect engineering as a strategic lever to activate inert TiO 2 facets, advancing the design of adaptive catalysts for sustainable fuel synthesis technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mechanistic Studies of Oxidative Degradation in Diamine-Appended Metal–Organic Frameworks Exhibiting Cooperative CO 2 Capture

Understanding the impact of O 2 during a carbon capture process is vital for designing robust, cost-effective materials for carrying it out. However, mechanistic studies of the O 2 -induced degradation of materials are not easily undertaken owing to the complex sequential reaction pathways that arise. Here, we report comprehensive mechanistic investigations of the O 2 -induced degradation of diamine-appended metal−organic frameworks (MOFs) exhibiting cooperative CO 2 adsorption. Oxygen exposure experiments were performed on seven different diamine-appended MOFs, including e-2−Mg 2 (dobpdc) (e-2 = N-ethylethylenediamine, dobpdc 4− = 4,4′-dioxidobiphenyl-3,3′-dicarboxylate), under various temperatures and O 2 pressures. These experiments show that diamine degradation inhibits CO 2 chemisorption and that the degradation rate is significantly influenced by the diamine structure. In contrast, the parent frameworks remain essentially intact upon O 2 exposure. Detailed characterization of O 2 -exposed e-2−Mg 2 (dobpdc) revealed the formation of various degradation products, including acetaldehyde, carbon dioxide, water, ethylamine, and other aldehyde- and imine-containing species. Together, these observations suggest that diamine degradation occurs via C−N bond cleavage through pathways involving C-centered radicals. Furthermore, computational evaluation of the initiation and propagation pathways for amine degradation in diamine-appended MOFs indicates that (i) degradation is likely initiated by OH • , (ii) carbon-centered radicals generated via radical transfer reactions react with O 2 , leading to amine degradation, and (iii) the ratelimiting step of the degradation reactions likely involves O−O bond cleavage. Overall, these mechanistic insights could inform strategies for mitigating O 2 -induced amine degradation in next-generation carbon capture technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Native Architecture of Wheat Straw Cell Walls: A Unified Model from X-ray Scattering and Solid-State NMR

Plant secondary cell walls constitute the dominant reservoir of renewable biomass, comprising tightly packed cellulose, hemicellulose, and lignin at the nanoscale. Recent advances in solid-state NMR spectroscopy and the availability of small-angle X-ray scattering for biomass characterization have led to an accumulation of experimental data on cell wall organization, yet no explicit structure model has simultaneously satisfied both Xray and NMR observations. Using wheat straw as a model system, we propose a structural framework consistent with current knowledge of cellulose biosynthesis, X-ray scattering data, and one- and two-dimensional 13 C solid-state NMR spectra. In this model, 18-chain elementary fibrils align in parallel and populate the cross-section at random. Arabinose-substituted xylan shows no conformational dependence for cellulose-binding in wheat, and only a minor fraction of 2-fold xylan appears in close proximity to cellulose, unlike in Arabidopsis, where xylan is more tightly attached to the cellulose surface. While NMR data cannot unambiguously resolve the internal arrangement of the 18 glucan chains, X-ray scattering profiles uniquely constrain the fibril size and exclude the possibility of tight bundling in the intact walls. The specific interaction between the matrix polymers and the cellulose elementary fibrils must be reconsidered in light of the small interfibril spaces, which bring the matrix components into spatial proximity with cellulose even in the absence of attractive interactions. These findings provide fundamental molecular-level insight into cellulose fibril architecture and matrix−polymer interactions, resolving longstanding discrepancies between spectroscopic and scattering data and advancing our understanding of biopolymer assembly into structurally and functionally versatile lignocellulosic biomaterials.

Carbohydrates↗
DOE OSTI2019

Mechanism of Inactivation of Ornithine Aminotransferase by (1S,3S)-3-Amino-4-(hexafluoropropan-2-ylidenyl)cyclopentane-1-carboxylic Acid

The inhibition of ornithine aminotransferase (OAT), a pyridoxal 5'-phosphate-dependent enzyme, has been implicated as a treatment for hepatocellular carcinoma (HCC), the most common form of liver cancer, for which there is no effective treatment. From a previous evaluation of our aminotransferase inhibitors, (1S,3S)-3-amino-4-(perfluoropropan-2-ylidene)cyclopentane-1-carboxylic acid hydrochloride (1) was found to be a selective and potent inactivator of human OAT (hOAT), which inhibited the growth of HCC in athymic mice implanted with human-derived HCC, even at a dose of 0.1 mg/kg. Currently, investigational new drug (IND)-enabling studies with 1 are underway. The inactivation mechanism of 1, however, has proved to be elusive. In this work we propose three possible mechanisms, based on mechanisms of known aminotransferase inactivators: Michael addition, enamine addition, and fluoride ion elimination followed by conjugate addition. On the basis of crystallography and intact protein mass spectrometry, it was determined that 1 inactivates hOAT through fluoride ion elimination to an activated 1,1'-difluoroolefin, followed by conjugate addition and hydrolysis. This result was confirmed with additional studies, including the detection of the cofactor structure by mass spectrometry and through the identification of turnover metabolites. On the basis of this inactivation mechanism and to provide further evidence for the mechanism, analogues of 1 (19, 20) were designed, synthesized, and demonstrated to have the predicted selective inactivation mechanism. These analogues highlight the importance of the trifluoromethyl group and provide a basis for future inactivator design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A Robust Methodology to Elucidate Kinetics of Room Temperature Electrochemical Propane Adsorption on Platinum

Electrocatalytic activation of alkanes can further decarbonize chemical manufacturing by leveraging affordable renewable electricity and readily available shale gas reserves in the United States. Earlier works have identified the unique role of Pt in adsorbing and activating alkanes, like propane, at room temperature in acidic, aqueous electrolytes, revealing spontaneous formation of deeply dehydrogenated propane-derived surface species with an intact C 3 - backbone. Although an adsorption mechanism was hypothesized, it has not been explicitly investigated to date, preventing the quantification of kinetic rate parameters. A robust methodology to investigate and benchmark propane adsorption kinetics on Pt is critical for the rational design of electrocatalysts that exhibit higher selectivity toward desired partially oxidized products. Herein, we analyze an oxidative current transience that appears during the adsorption of propane on Pt in aqueous electrochemical conditions and develop a methodology that elucidates the adsorption mechanism and enables quantification of rate parameters such as order dependences and apparent activation barriers. This method yields an expected first-order dependence with respect to propane concentration at low coverage and reveals a second-order dependence with respect to the concentration of surface active sites. Additionally, the apparent activation barrier for propane adsorption was calculated using an Arrhenius analysis of the current transience under temperature control. The experimentally measured activation barrier of 35 kJ mol –1 is in excellent agreement with the theoretical barrier calculated by density functional theory (DFT). The kinetic analysis was extended, via the use of transition state theory, to extract entropy and enthalpy of activation, yielding consistent results with the proposed two-step adsorption mechanism and DFT calculations. These results demonstrate reliable quantification of kinetic parameters for electrocatalytic activation of C–H bonds in alkanes that can be employed for rational catalyst development for a versatile range of electrocatalytic conditions.

alkane activation↗
DOE OSTI2026

Effects of Polymer Morphology on Solvent and Catalyst Accessibility during Polyethylene and Polystyrene Autoxidation

Efficient catalytic deconstruction of plastics requires facile solvent and catalyst access to polymer substrates to minimize mass transfer effects. Autoxidation using Co(II) acetate, Mn(II) acetate, and a radical carrier in acetic acid is a promising strategy to deconstruct mixed plastic waste, yet the role of polymer morphology in governing solvent and catalyst accessibility remains poorly understood. Here, in situ simultaneous small- and wide-angle X-ray scattering (SAXS/WAXS), complemented by X-ray fluorescence (XRF) imaging and high-pressure differential scanning calorimetry (DSC), were used to elucidate interactions between acetic acid, a Co/Mn catalyst solution, and semicrystalline polyethylene (PE) and amorphous polystyrene (PS) from room temperature to 160 °C. In PE, acetic acid and catalyst access were confined to amorphous regions and cryomilled particle interfaces at room temperature, while crystalline lamellae remained intact after soaking for up to 34 h. Increasing temperature enabled solvent uptake into PE, followed by solvent-assisted softening above 100 °C, and a modest melting-point depression that removed lamellar transport barriers upon melting. Conversely for PS, acetic acid penetrated the glassy polymer without inducing chain mobility until the glass transition was reached, above which the observed structural changes were consistent with enhanced segmental mobility which enabled bulk penetration. These results suggest that polymer morphology and thermally activated physical transitions arising from diffusion and polymer–solvent interactions can influence whether autoxidation of plastics is transport-limited or kinetically controlled, providing a framework for aligning reaction conditions with reaction outcomes.

09 BIOMASS FUELS↗
DOE OSTI2020

Internal Fragments Generated by Electron Ionization Dissociation Enhance Protein Top-Down Mass Spectrometry

Top-down proteomics by mass spectrometry (MS) involves the mass measurement of an intact protein followed by subsequent activation of the protein to generate product ions. Electron-based fragmentation methods like electron capture dissociation and electron transfer dissociation are widely used for these types of analyses. Recently, electron ionization dissociation (EID), which utilizes higher energy electrons (>20 eV) has been suggested to be more efficient for top-down protein fragmentation compared to other electron-based dissociation methods. In this paper, we demonstrate that the use of EID enhances protein fragmentation and subsequent detection of protein fragments. Protein product ions can form by either single cleavage events, resulting in terminal fragments containing the C-terminus or N-terminus of the protein, or by multiple cleavage events to give rise to internal fragments that include neither the C-terminus nor the N-terminus of the protein. Conventionally, internal fragments have been disregarded, as reliable assignments of these fragments were limited. Here, we demonstrate that internal fragments generated by EID can account for ~20–40% of the mass spectral signals detected by top-down EID-MS experiments. By including internal fragments, the extent of the protein sequence that can be explained from a single tandem mass spectrum increases from ~50 to ~99% for 29 kDa carbonic anhydrase II and 8.6 kDa ubiquitin. When searching for internal fragments during data analysis, previously unassigned peaks can be readily and accurately assigned to confirm a given protein sequence and to enhance the utility of top-down protein sequencing experiments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

193 nm Ultraviolet Photodissociation for the Characterization of Singly Charged Proteoforms Generated by MALDI

MALDI imaging allows for the near-cellular profiling of proteoforms directly from microbial, plant, and mammalian samples. Despite detecting hundreds of proteoforms, identification of unknowns with only intact mass information remains a distinct challenge, even with high mass resolving power and mass accuracy. To this end, many supplementary methods have been used to create experimental databases for accurate mass matching, including bulk or spatially resolved bottom-up and/or top-down proteomics. Herein, we describe the application of 193 nm ultraviolet photodissociation (UVPD) for fragmentation of quadrupole isolated singly charged ubiquitin (m/z 8565) by MALDI-UVPD on a UHMR HF Orbitrap. This platform permitted the high-resolution accurate mass measurement of not just terminal fragments but also large internal fragments. Finally, the outlined workflow demonstrates the feasibility of top-down analyses of isolated MALDI protein ions and the potential toward more comprehensive characterization of proteoforms in MALDI imaging applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

IsoMatchMS : Open-Source Software for Automated Annotation and Visualization of High Resolution MALDI-MS Spectra

Due to its speed, accuracy, and adaptability to various sample types, matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) has become a popular method to identify molecular isotope profiles from biological samples. Often MALDI-MS data do not include tandem MS fragmentation data, and thus the identification of compounds in samples requires external databases so that the accurate mass of detected signals can be matched to known molecular compounds. Most relevant MALDI-MS software tools developed to confirm compound identifications are focused on small molecules (e.g., metabolites, lipids) and cannot be easily adapted to protein data due to their more complex isotopic distributions. Here, we present an R package called IsoMatchMS for the automated annotation of MALDI-MS data for multiple datatypes: intact proteins, peptides, and glycans. This tool accepts already derived molecular formulas or, for proteomics applications, can derive molecular formulas from a list of input peptides or proteins including proteins with post-translational modifications. In conclusion, visualization of all matched isotopic profiles is provided in a highly accessible HTML format called a trelliscope display, which allows users to filter and sort by several parameters such as match scores and the number of peaks matched. IsoMatchMS simplifies the annotation and visualization of MALDI-MS data for downstream analyses.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Unimodal Imaging of Monovalent Metal-Chelator Complexes and Lipids by MALDI Imaging Mass Spectrometry

Careful regulation of monovalent metal ions (M + ) is necessary to maintain a functional cellular system. Of these ions, appropriate sodium (Na + ) and potassium (K + ) concentrations are particularly integral for electrochemical signaling, as well as the secondary transport of nutrients and waste. Dysregulation of M + homeostasis can disrupt these mechanisms, potentially influencing the metabolism of downstream biomolecules such as lipids. Thus, the relationship between M + abundances and related biomolecular distributions must be elucidated to better understand the physiology of healthy and disordered tissues. Traditional techniques for imaging biological metal distributions include SIMS, LA-ICP-MS, and XRF; however, these capabilities are limited to elemental analysis or the analysis of molecular fragments and must be paired with other modalities to visualize distributions of more complex biomolecules within the same or similar samples. Conversely, matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI IMS) is a powerful tool often used for mapping such biomolecular distributions, but current methods are unable to detect metals within tissue. This study illustrates a novel methodology that adds metal detection to the MALDI IMS repertoire through which the simultaneous detection of M + metals and lipids is achievable. Using a robotic sprayer for homogeneous application, on-tissue deposition of the chelator deferiprone (DEF) enables subsequent detection of the ionizable metal-chelator complex by MALDI without hindering lipid detection. Our work provides proof-of-concept data for the simultaneous detection of K + , Na + , and intact lipids using MALDI IMS.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Scalable En Echelon Shear‐Fracture Aperture‐Roughness Mechanism: Theory, Validation, and Implications

Abstract Shear fractures can facilitate fluid conductivity through rock. Aperture and roughness are controlling characteristics for a fracture's fluid conductivity. Inspired by en echelon fractures, we develop a shear “fracturelet” model that predicts anisotropic aperture with respect to the direction of shearing, rougher (nonplanar) rather than smoother (planar) fractures, and the bounds of this roughness for a coalesced fracture. This tendency for rougher fracture creation is validated by in situ X‐ray images and fluid conductivity measurements from triaxial direct shear experiments on anhydrite and shale. These experiments were conducted at confining stresses from 4 to 30 MPa and shear displacement magnitudes from 0 to 2 mm on initially intact rock specimens. Hydraulic, dilatational, and local fracture apertures were measured in the experiments. Apertures exhibited strong anisotropy with more conductive flow paths forming perpendicular to the direction of shearing. Local and dilatational aperture were found to be positively correlated with increasing shear displacement but hydraulic aperture was found to vary significantly, always having values smaller than the other aperture measures at factors ranging from 0.6 to 0.0. An implication of these results is that shear fractures have a mechanism for simultaneously exhibiting very low fluid conductivity and high fluid storage volume.

Frash, Luke P.↗