Search NASA⌕ Search

SEARCH · Search NASA

Results for “Interfacial transport”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Magnetism and spin-dependent transport phenomena across Verwey and Morin transitions in iron oxide/Pt bilayers

Understanding the influence of phase coexistence and phase transitions on spin transport properties in a ferromagnet/heavy metal (FM/HM) system is of utmost importance for spintronics. Here, we report a comprehensive investigation of the magnetic and spin transport properties of biphase iron oxide (BPIO = α-Fe 2 O 3 +Fe 3 O 4 )/Pt films over a wide temperature range, 10K ≤ T ≤ 300K. In-plane (IP) and out-of-plane (OOP) magnetometry and radio frequency transverse susceptibility measurements confirm the characteristic features of the Verwey and Morin transitions at T V ~ 120K and TM ~ 200 K, respectively. Further, anisotropic magnetoresistance (AMR) is observed in the BPIO film, which arises mainly from the spin polarized tunneling of conduction electrons between neighboring uniformly magnetized grains through the resistive grain boundary. Spin Hall magnetoresistance (SMR) and spin Hall anomalous Hall effect (SH-AHE) are detected in the BPIO/Pt films. Around the T V , the temperature evolution of SMR shows a sharp maximum, while SH-AHE exhibits a steep decrease. Both SMR and SH-AHE are strongly susceptible to the Verwey transition but the Morin transition, indicating that the interfacial magnetism of our BPIO/Pt film is dominated by the Fe 3 O 4 phase rather than the α-Fe 2 O 3 phase.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Buried Interfaces in Organic Photocathodes for H 2 Evolution: Fermi-Level Pinning and Recombination

Herein, we demonstrate how Fermi-level pinning at buried contacts impacts solar fuel generation in all-polymer photocathodes by systematically comparing the effects of work function, hydroxyl coverage, and hydrogen evolution using chemically modified indium tin oxide (ITO) supports. Photovoltages and net photocathode performance are improved when the ITO is passivated using phosphonic acids, independent of work function, suggesting that the passivation reduces Fermi-level pinning at the buried interface arising from blended heterojunction interactions with surface metal hydroxyls. Transient photovoltage decay reveals differences in recombination mechanisms, supported by light intensity-dependent measurements. Briefly, nonpassivated, hydrophilic contacts exhibit trap-assisted recombination, while passivated, hydrophobic contacts follow bimolecular recombination. We then investigate changes in electroactivity of hole-transfer processes as a function of scan rate and repetitive cycling using a diffusion-controlled molecular redox probe, analogous to a hole-only device achieved via the electrolyte. The nonpassivated buried contacts exhibit higher overpotentials for oxidation, indicative of hole injection/extraction barriers. We observe irreversible electron transfer via the hole-transport level of the blended heterojunction and a strong cycle dependence, consistent with changes in the hole trap state density. Passivation results in more reversible redox behaviors, consistent with more Ohmic-like contacts. Collectively, these results provide context toward the realization of durable organic photoelectrodes with optimized photovoltages and net solar-to-hydrogen conversion efficiencies via fundamental understanding of the rates of carrier generation, recombination, and transport in high-dielectric aqueous environments and opportunities to characterize buried interfaces under device-relevant electric fields.

buried interfaces↗
DOE OSTI2023

Emerging investigator series: kinetics of diopside reactivity for carbon mineralization in mafic–ultramafic rocks

The ongoing use of fossil fuels to supply modern energy demands has necessitated research on combating carbon dioxide (CO 2 ) emissions and climate change. Carbon storage via mineral trapping in basalt and related rocks is a promising strategy. However, mineralization rates depend on the variable minerology that makes up these rock formations. Diopside (CaMgSi 2 O 6 ) is a common pyroxene mineral in ultramafic and mafic rocks including basalt, but relatively little work has been done to understand its carbon mineralization kinetics using hydrated supercritical CO 2 , which induces the formation of reactive nanoscale interfacial water films. Here, in situ XRD experiments at 50–110 °C and 90 bar indicate that diopside transforms into a myriad of Mg/Ca carbonates, including huntite [Mg 3 Ca(CO 3 ) 4 ] and very high magnesium calcite (VHMC, i.e., protodolomite). Through ex situ characterization, we were able to constrain reaction pathways for the dissolution–precipitation transformation process including metastable intermediate precipitates. Experiments performed at variable temperatures enabled Avrami-derived rate constants and an apparent activation energy of 97 ± 16 kJ mol –1 , implying the dissolution of diopside is the rate-limiting step. Density functional theory (DFT) calculations, used to gain molecular insight into the surface stability of the diopside during dissolution, suggest that exposed calcium cations are susceptible to dissolution when put in contact with water given their coordination environment. The collective results point to the high CO 2 mineralization potential of diopside in basalts, which could help guide parameterization of reactive transport models needed to design and permit commercial-scale subsurface carbon storage operations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A two-phase three-field modeling framework for heat pipe application in nuclear reactors

Heat pipes and two-phase thermosyphons are highly efficient heat transfer devices utilizing continuous evaporation and condensation of working fluid for two-phase heat transport in closed systems. Because of the nearly isothermal and fully passive phase-change heat transfer mechanism, heat pipes and thermosyphons have found many applications in nuclear engineering, space technologies, and other energy systems. High-temperature heat pipes are used in nuclear microreactors to remove fission power from the primary system and are coupled with power conversion systems or process heat applications. Modeling of the two-phase flow phenomena inside a heat pipe is essential to its design and safety analysis. In this study, a comprehensive one-dimensional two-phase three-field flow model has been developed for the analysis of heat pipes in normal operation conditions and transients. The conservation or field equations of mass, momentum, and energy were developed for the liquid film, vapor, and droplet. In addition, constitutive models or correlations were reviewed thoroughly and provided for the closure of the three-field equations. Specific constitutive equations regarding interfacial mass and heat transfer at two interfaces, namely film-gas interface and gas-droplet interface, were reviewed for droplet entrainment and deposition rates as well as film and droplet evaporation rates. Furthermore, mechanistic correlations of annular flow film thickness were recommended for the modeling of the thermosyphons without a wick as a critical constitutive correlation. Furthermore, experimental data needs from new experiments using a prototype working fluid or surrogate fluids for the model validation of high-temperature heat pipes in microreactors were recommended for future research.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Comparison of the Mechanical Properties of a Conjugated Polymer Deposited Using Spin Coating, Interfacial Spreading, Solution Shearing, and Spray Coating

The mechanical properties of π-conjugated (semiconducting) polymers are a key determinant of the stability and manufacturability of devices envisioned for applications in energy and healthcare. These properties—including modulus, extensibility, toughness, and strength—are influenced by the morphology of the solid film, which depends on the method of processing. To date, the majority of work done on the mechanical properties of semiconducting polymers has been performed on films deposited by spin coating, a process not amenable to the manufacturing of large-area films. Here, we compare the mechanical properties of thin films of regioregular poly(3-heptylthiophene) (P3HpT) produced by three scalable deposition processes—interfacial spreading, solution shearing, and spray coating—and spin coating (as a reference). Our results lead to four principal conclusions. (1) Spray-coated films have poor mechanical robustness due to defects and inhomogeneous thickness. (2) Sheared films show the highest modulus, strength, and toughness, likely resulting from a decrease in free volume. (3) Interfacially spread films show a lower modulus but greater fracture strain than spin-coated films. (4) The trends observed in the tensile behavior of films cast using different deposition processes held true for both P3HpT and poly(3-butylthiophene) (P3BT), an analogue with a higher glass transition temperature. Grazing incidence X-ray diffraction and ultraviolet–visible spectroscopy reveal many notable differences in the solid structures of P3HpT films generated by all four processes. Herein, while these morphological differences provide possible explanations for differences in the electronic properties (hole mobility), we find that the mechanical properties of the film are dominated by the free volume and surface topography. In field-effect transistors, spread films had mobilities more than 1 magnitude greater than any other films, likely due to a relatively high proportion of edge-on texturing and long coherence length in the crystalline domains. Overall, spread films offer the best combination of deformability and charge-transport properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Deepening the LUMO: Brominated Naphthalene Diimide Electron Transport Layers for Low-Hysteresis Perovskite Solar Cells

Precise energy level alignment at the interfaces between the charge transport layers, active layer, and electrodes plays a key role in maximizing photovoltaic performance and operational stability in perovskite solar cells (PSCs). Organic electron transport layers (ETLs) have received little attention compared to their inorganic counterparts but offer the unique advantage of facile functionalization for fine-tuning of electronic properties. Here, we report the design, synthesis, and characterization of two benzyl-phosphonic acid (BnPA)-functionalized naphthalene diimide (NDI) derivatives, NDI-(BnPA) 2 and Br 2 -NDI-(BnPA) 2 as organic ETLs for PSCs in an n-i-p device configuration. Bromination of the NDI core at the 4,9-positions deepens the lowest unoccupied molecular orbital (LUMO) in Br 2 -NDI-(BnPA) 2 by 0.29 eV, enabling improved energy alignment with the conduction band minimum of the perovskite. Devices incorporating Br 2 -NDI-(BnPA) 2 demonstrated enhanced short-circuit current density (JSC), reduced hysteresis, and a maximum power conversion efficiency of 13.67%, compared to 13.20% for the unsubstituted NDI-(BnPA) 2 analog. The deeper LUMO of Br 2 -NDI-(BnPA) 2 is hypothesized to facilitate more efficient electron extraction, suppress interfacial charge accumulation, and reduce field-driven ion migration, collectively contributing to the observed reduction in hysteresis. These results highlight the effectiveness of combining molecular-level LUMO tuning with robust interfacial anchoring to advance the performance and durability of organic ETLs in PSCs.

Deposition↗
DOE OSTI2021

Understanding interfacial chemistry of positive bias high-voltage degradation in photovoltaic modules

Photovoltaic module degradation from a high system voltage is a prevalent degradation mode in the field, where the enabling degradation mechanisms are inherently dependent on the voltage bias polarity of the installed system. In this study, the effects of positive bias on module performance are confirmed and the underlying chemical degradation processes are more thoroughly investigated to reveal different degradation pathways from those previously reported in negative bias studies. When cells are under +1000 V stress, crystalline silicon mini-modules with poly(ethylene-co-vinyl acetate) (EVA) encapsulant demonstrated a significant photocurrent loss due to EVA discoloration and delamination from increased chemical reactivity at the front-side EVA/cell metallization interface. Brown discoloration of the EVA encapsulant near the cell gridlines is linked to an electrochemical reaction at the Ag gridlines under hot and humid conditions (85 °C, 85% relative humidity). Chemical compositional analysis using X-ray photoelectron spectroscopy (XPS) confirmed that the discoloration is attributed to the formation of silver sulfide (Ag 2 S) and/or silver oxide (Ag 2 O) species at the EVA/Ag gridline interface. The subsequent migration of Ag ions from the cell gridlines into the bulk of the EVA was evident from XPS depth profiling and optical microscopy. However, the Ag signal was not detected at the EVA/glass interface, inferring limited ionic transport through the nominally 0.45 mm thick encapsulant. For the samples studied herein, the sulfur is believed by the process of elimination to come from the ambient air, diffusing into the module through the permeable polymer backsheet.

14 SOLAR ENERGY↗
DOE OSTI2019

Enhanced Conductivity via Homopolymer-Rich Pathways in Block Polymer-Blended Electrolytes

The optimization of ionic conductivity and lithium-ion battery stability can be achieved by independently tuning the ion transport and mechanical robustness of block polymer (BP) electrolytes. However, the ionic conductivity of BP electrolytes is inherently limited by the covalent attachment of the ionically conductive block to the mechanically robust block, among other factors. Herein, the BP electrolyte polystyrene-block-poly(oligo-oxyethylene methacrylate) [PS-b-POEM] was blended with POEM homopolymers of varying molecular weights. The incorporation of a higher molecular weight homopolymer additive (α > 1 state) promoted a “dry brush-like” homopolymer distribution within the BP self-assembly and led to higher lithium salt concentrations in the more mobile homopolymer-rich region, increasing overall ionic conductivity relative to the “wet brush-like” (α < 1 state) and unblended composites, where α is the molecular weight ratio between the POEM homopolymer and the POEM block in the copolymer. Here, neutron and X-ray reflectometry (NR and XRR, respectively) provided additional details on the lithium salt and polymer distributions. From XRR, the α > 1 blends showed increased interfacial widths in comparison to their BP (unblended) or α < 1 counterparts because of the more central distribution of the homopolymer. This result, paired with NR data that suggested even salt concentrations across the POEM domains, implied that there was a higher salt concentration in the homopolymer POEM-rich regions in the dry brush blend than in the wet brush blend. Furthermore, using 7 Li solid-state nuclear magnetic resonance spectroscopy, we found a temperature corresponding to a transition in lithium mobility (T Li mobility ) that was a function of blend type. T Li mobility was found to be 39 °C above T g in all cases. Interestingly, the ionic conductivity of the blended BPs was highest in the α > 1 composites, even though these composites had higher T g s than the α < 1 composites, demonstrating that homopolymer-rich conducting pathways formed in the α > 1 assemblies had a larger influence on conductivity than the greater lithium ion mobility in the α < 1 blends.

25 ENERGY STORAGE↗
DOE OSTI2024

Chiral Electrokinetic Phenomena in Single Nanopores

Abstract The arrangement of solvent molecules and ions at solid–liquid interfaces determines electrochemical properties that are important in separations platforms, sensing technologies, and energy‐storage systems. Here we show that single glass and polymer pores in contact with propylene carbonate (PC) solutions of LiClO 4 exhibit an effective surface potential that is modulated by the enantiomeric excess of the solvent. In particular, electrochemical and electrokinetic measurements of ionic transport through glass pipettes and polymer pores reveal that the effective surface potential is significantly lower in solutions prepared using enantiomerically pure PC than in solutions prepared using racemic PC. Both pore systems became positively charged in all racemic solutions examined in the range of LiClO 4 concentrations between 1 mM and 100 mM, whereas solutions in ( R )‐(+)‐PC induced a positive surface potential only at concentrations above ~5 mM. The effective surface potential is quantified through asymmetry in current–voltage curves and zeta‐potential measurements. Vibrational sum‐frequency‐generation experiments on LiClO 4 solutions in racemic and enantiomerically pure PC indicate that the surface lipid‐bilayer‐like region in the former is more strongly organized than in the latter, dictating the favorable positions for lithium and perchlorate ions in each case. The more ordered molecular packing in the racemic liquid leads to accumulation of lithium ions on the outside of the bilayer, creating a higher effective positive charge. Our results highlight the extreme sensitivity of the interfacial potential on molecular organization of the solvent, and the relatively unexplored role that chirality can play in electrokinetic phenomena.

Alanis, Kristen↗
DOE OSTI2024

Enhanced spin pumping in heterostructures of coupled ferrimagnetic garnets

Spin pumping has significant implications for spintronics, providing a mechanism to manipulate and transport spins for information processing. Understanding and harnessing spin currents through spin pumping is critical for the development of efficient spintronic devices. The use of a magnetic insulator with low damping enhances the signal-to-noise ratio in crucial experiments such as spin-torque ferromagnetic resonance (FMR) and spin pumping. A magnetic insulator coupled with a heavy metal or quantum material offers a more straightforward model system, especially when investigating spin-charge interconversion processes to greater accuracy. This simplicity arises from the absence of unwanted effects caused by conduction electrons unlike in ferromagnetic metals. Here, we investigate the spin pumping in coupled ferrimagnetic (FiM) Y 3 Fe 5 O 12 (YIG)/Tm 3 Fe 5 O 12 (TmIG) bilayers combined with heavy-metal (Pt) using the inverse spin Hall effect. It is observed that magnon transmission occurs at both of the FiMs FMR positions. The enhancement of spin pumping voltage (V sp ) in the FiM garnet heterostructures is observed. The plausible reason might be the interfacial exchange coupling between FiMs. The modulation of V sp is achieved by tuning the bilayer structure. Further, the spin mixing conductance for these coupled systems is found to be ≈ 10 18 m –2 . Furthermore, our findings describe a coupled FiM system for the investigation of magnon coupling providing opportunities for magnonic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

The early-stage growth and reversibility of Li electrodeposition in Br-rich electrolytes

Significance Spatial variations in chemical composition and transport properties of the material phases (interphases) formed on reactive metals in liquid electrolytes are thought to be responsible for the propensity of metal battery electrodes to electrodeposit in irregular, nonplanar morphologies. Equilibrium theoretical calculations using joint density functional analysis in vacuum and generic liquid media indicate that in-plane transport at such interphases is enhanced substantially if LiX (X = Br > Cl > F) species predominate. This study employs optical visualization experiments and nucleation theory to experimentally investigate nucleation and early-stage growth dynamics of metallic lithium in electrolytes enriched with LiBr. It is shown that the Li-Br–rich interphases formed profoundly alter the morphology of Li electrodeposits by enhancing Li-ion surface diffusion.

25 ENERGY STORAGE↗
DOE OSTI2024

Spin-flop coupling at L⁢a 0.5 ⁢S⁢r 0.5 ⁢Fe⁢O 3 /L⁢a 0.7⁢ S⁢r 0.3 ⁢Mn⁢O 3 interfaces

Antiferromagnetic (AFM) spintronics offer several benefits compared to their ferromagnetic (FM) counterparts, such as high storage capacity and faster processing speed, however, difficulties in manipulating and detecting the AFM moments impede their implementation. Spin-flop coupling, the interfacial perpendicular coupling between FM and AFM moments, can be utilized to control the orientation of AFM moments with the application of moderate magnetic fields on the scale of tenths of a Tesla. Here, in this work, epitaxial bilayers of AFM La 0.5 Sr 0.5 FeO 3 (LSFO)/FM La 0.7 Sr 0.3 MnO 3 (LSMO) with fixed LSMO thickness (~85 u.c.) and LSFO thicknesses varying from 10 to 50 u.c. were investigated to determine the effect of Sr doping and La 1-x Sr x FeO 3 magnetocrystalline anisotropy on the strength of spin-flop coupling. X-ray magnetic linear dichroism demonstrated that the spin-flop coupling strength decreased with increasing LSFO layer thickness, persisting at a thickness of 50 u.c. (~20 nm). Furthermore, photoemission electron microscopy revealed a domain-by-domain correlation between the FM and AFM domains consistent with the perpendicular orientation dictated by spin-flop coupling. These results demonstrate that LSFO/LSMO bilayers have the potential to serve as a model materials system for AFM spin transport measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Structural Implications of Interfacial Hydrogen Bonding in Hydrated Wyoming-Montmorillonite Clay

Montmorillonite (MMT) clay - a layered porous nanomaterial used as seals in engineered waste containment barriers for spent nuclear fuel - adopts discrete hydration/swelling states depending upon surrounding water and ion activities and confining pressure. The structure of nanoconfined water and charge-balancing counterions in the clay mineral interlayers dictate the swelling and mechanical behavior of MMT, so a molecular model for this clay with high structural fidelity is required to accurately predict the reliability of long-term nuclear waste storage. Here, we present a molecular model for MMT that is based on high resolution transmission electron microscopy of Wyoming-MMT single crystals. Imaging data unambiguously show a cis-vacant arrangement of structural hydroxyl groups in the octahedral sheet, whereas existing molecular models assume a centrosymmetric trans-vacant configuration for MMT. Furthermore, using atomistic simulations, we find that the cis-vacant arrangement of structural hydroxyl groups significantly affects the structure of adsorbed water yielding a larger population of hydrogen bonds with bridging oxygens on the tetrahedral sheet and weak hydrogen bonding between the hydroxyl groups in the octahedral sheet and water in the clay mineral interlayers. As a result, water adsorbed in the interlayer is more "ice-like", with stronger ordering and lower density, although the diffusivity of the interlayer species is not significantly diminished. Our improved structural model for MMT provides insight into the energetics of water adsorption, which ultimately dictates its pore- to macro-scale swelling, transport, and fracture properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Formation of Mn-rich interfacial phases in Co 2 Fe x Mn 1-x Si thin films

Here, we report the formation of Mn-rich regions at the interface of Co 2 Fe x Mn 1-x Si thin films grown on GaAs substrates by molecular beam epitaxy (MBE). Scanning transmission electron microscopy (STEM) with electron energy loss (EEL) spectrum imaging reveals that each interfacial region: (1) is 1–2 nm wide, (2) occurs irrespective of the Fe/Mn composition ratio and in both Co-rich and Co-poor films, and (3) displaces both Co and Fe indiscriminately. We also observe a Mn-depleted region in each film directly above each Mn-rich interfacial layer, roughly 3 nm in width in the x = 0 and x = 0.3 films, and 1 nm in the x = 0.7 (less Mn) film. We posit that growth energetics favor Mn diffusion to the interface even when there is no significant Ga interdiffusion into the epitaxial film. Element-specific X-ray magnetic circular dichroism (XMCD) measurements show larger Co, Fe, and Mn orbital to spin magnetic moment ratios compared to bulk values across the Co 2 Fe x Mn 1-x Si compositional range. The values lie between reported values for pure bulk and nanostructured Co, Fe, and Mn materials, corroborating the non-uniform, layered nature of the material on the nanoscale. Finally, SQUID magnetometry demonstrates that the films deviate from the Slater-Pauling rule for uniform films of both the expected and the measured composition. The results inform a need for care and increased scrutiny when forming Mn-based magnetic thin films on III-V semiconductors like GaAs, particularly when films are on the order of 5 nm or when interface composition is critical to spin transport or other device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Nanoconfinement of Carbon Dioxide within Interfacial Aqueous/Ionic Liquid Systems

Nanoporous, gas-selective membranes have shown encouraging results for the removal of CO 2 from flue gas, yet the optimal design for such membranes is often unknown. Therefore, we used molecular dynamics simulations to elucidate the behavior of CO 2 within aqueous and ionic liquid (IL) systems ([EMIM][TFSI] and [OMIM][TFSI]), both confined individually and as an interfacial aqueous/IL system. We found that within aqueous systems the mobility of CO 2 is reduced due to interactions between the CO 2 oxygens and hydroxyl groups on the pore surface. Within the IL systems, we found that confinement has a greater effect on the [EMIM][TFSI] system as opposed to the [OMIM][TFSI] system. Paradoxically, the larger and more asymmetrical [OMIM]+ molecule undergoes less efficient packing, resulting in fewer confinement effects. Finally, free energy surfaces of the nanoconfined aqueous/IL interface demonstrate that CO 2 will transfer spontaneously from the aqueous to the IL phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Decoupling electrode kinetics to elucidate reaction mechanisms in alkaline water electrolysis

Alkaline water electrolysis (AWE) presents key advantages, including reduced material costs, enhanced operational stability, and compatibility with non-precious metal catalysts, positioning it as a scalable route for hydrogen production. In this study, we introduce a minimally invasive single-cell configuration incorporating a reference electrode via diaphragm extension to form an internal ion channel. This setup, combined with an interfaced potentiostat and auxiliary electrometer, enables real-time, independent monitoring of anode and cathode behavior, offering high-resolution electrochemical diagnostics. While it is well established that the hydrogen evolution reaction (HER) exhibits sluggish kinetics in alkaline media, our study reveals that this limitation persists even in practical AWE systems where nickel-based substrates are used as electrodes. This observation is supported by both experimental data and voltage breakdown modeling. Arrhenius-type analysis reveals that localized electric fields induced by catalysts shift the reaction kinetics from classical Butler–Volmer behavior toward a Marcus-like regime, where interfacial molecular dynamics and bimolecular charge transfer dominate. We propose a semi-empirical model and a surficial reaction mechanism to describe these dynamics. This work underscores the critical need for cathode innovation and provides a rational framework for designing advanced catalysts and electrode architectures to optimize AWE performance.

08 HYDROGEN↗
DOE OSTI2020

Image-enhanced bipolaron formation at organic semiconductor/electrode interfaces

We explore the image charge interaction for organic semiconductor bipolarons near a conducting interface and find that the cross term between one of the constituent charges and the image of its neighbor stabilizes the bipolaron by up to ~0.3 eV, dramatically increasing the concentration of this species near the interface. Using density functional theory calculations for the common hole transport molecule N,N'-bis(3-methylphenyl)- N,N'-diphenylbenzidine, we validate a simple point charge description of this effect and incorporate it within an interface energy level alignment model to predict the density of polarons and bipolarons near the interface. We find that the image effect greatly enhances bipolaron formation in the first few monolayers, leading to the expectation that bipolarons account for more than 1% of the total interface charge in many cases of practical interest. Furthermore, this result reinforces the notion that bipolarons are robust near the contacts of many organic semiconductor devices and thus helps to rationalize their involvement in the phenomenon of unipolar organic magnetoresistance.

36 MATERIALS SCIENCE↗
DOE OSTI2020

An in situ shearing x-ray measurement system for exploring structures and dynamics at the solid–liquid interface

Revealing interfacial structure and dynamics has been one of the essential thematic topics in material science and condensed matter physics. Synchrotron-based x-ray scattering techniques can deliver unique and insightful probing of interfacial structures and dynamics, in particular, in reflection geometries with higher surface and interfacial sensitivity than transmission geometries. We demonstrate the design and implementation of an in situ shearing x-ray measurement system, equipped with both inline parallel-plate and cone-and-plate shearing setups and operated at the advanced photon source at Argonne National Laboratory, to investigate the structures and dynamics of end-tethered polymers at the solid-liquid interface. With a precise lifting motor, a micrometer-scale gap can be produced by aligning two surfaces of a rotating upper shaft and a lower sample substrate. A torsional shear flow forms in the gap and applies tangential shear forces on the sample surface. The technical combination with nanoscale rheology and the utilization of in situ x-ray scattering allow us to gain fundamental insights into the complex dynamics in soft interfaces under shearing. In this work, we demonstrate the technical scope and experimental capability of the in situ shearing x-ray system through the measurements of charged polymers at both flat and curved interfaces upon shearing. Furthermore, through the in situ shearing x-ray scattering experiments integrated with theoretical simulations, we aim to develop a detailed understanding of the short-range molecular structure and mesoscale ionic aggregate morphology, as well as ion transport and dynamics in soft interfaces, thereby providing fundamental insight into a long-standing challenge in ionic polymer brushes with a significant technological impact.

36 MATERIALS SCIENCE↗