Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEADING ABSTRACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Staphylococcal enterotoxin C2 mutant drives T lymphocyte activation through PI3K/mTOR and NF-ĸB signaling pathways

Staphylococcal enterotoxin C2 (SEC2), a superantigen, causes rapid clonal expansion of lymphocytes and secretion of T cell growth factors, leading to a severe inflammatory response within tissues. Although previous studies have shown that ST-4, a SEC2 mutant with enhanced recognition of Vβ regions of T-cell receptors (TCRVβ), can activate an increased number of T cells and produce more cytokines than SEC2. However, the signaling mechanisms of SEC2/ST-4-mediated immune activation have not been addressed. In this study, we showed that the phosphatidylinositide-3-kinase (PI-3K) inhibitor LY294002, mammalian target of rapamycin (mTOR) inhibitor rapamycin, and nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB) inhibitor Bay11-7085 could suppress SEC2/ST-4-induced proliferation, CD69/CD25 expression, cell-cycle progression, and IL-2 production in BALB/c mouse splenocytes. In addition, we observed significantly upregulated expression of p70S6K, cyclin E, cyclin D3, and NF-ĸB/p65, but downregulated expression of p27kip during SEC2/ST-4-driven T cells activation. However, SEC2/ST-4-induced changes in cell cycle and PI3K/mTOR signaling were significantly relieved by either LY294002 or rapamycin, and the induction of NF-ĸB/p65 induced was significantly downregulated by Bay11-7085. Moreover, we found that IL-2 secretion was positively associated with p65 expression in a time- and dose-dependent manner. Taken together, our findings demonstrate the involvement of PI3K/mTOR and NF-κB signaling pathways in SEC2/ST-4-induced T cell activation. ST-4 intensifies PI3K/mTOR and NF-ĸB signaling transduction, ultimately leading to enhance T cell activation. These results provide a theoretical mechanism for future immunotherapy using ST-4. - Graphical abstract: SEC2/ST-4 drives T lymphocyte activation through PI3K/mTOR and NF-ĸB signaling pathways - Highlights: • SEC2/ST-4 induces lymphocyte proliferation, CD69, CD25 expression, IL-2 secretion. • SEC2/ST-4 upregulates S6K, cyclin E/D3, p65 expression at mRNA and protein levels. • SEC2/ST-4 downregulates p27kip expression at mRNA and protein levels. • PI3K/mTOR and NF-ĸB inhibitors reverse molecules expression induced by SEC2/ST-4. • ST-4 exhibits higher efficiency than SEC2 in PI3K/mTOR and NF-ĸB pathways.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

Comparing Convective Self‐Aggregation in Idealized Models to Observed Moist Static Energy Variability Near the Equator

Abstract Idealized convection‐permitting simulations of radiative‐convective equilibrium have become a popular tool for understanding the physical processes leading to horizontal variability of tropical water vapor and rainfall. However, the applicability of idealized simulations to nature is still unclear given that important processes are typically neglected, such as lateral water vapor advection by extratropical intrusions, or interactive ocean coupling. Here, we exploit spectral analysis to compactly summarize the multiscale processes supporting convective aggregation. By applying this framework to high‐resolution reanalysis data and satellite observations in addition to idealized simulations, we compare convective‐aggregation processes across horizontal scales and data sets. The results affirm the validity of the radiative‐convective equilibrium simulations as an analogy to the real world. Column moist static energy tendencies share similar signs and scale selectivity in convection‐permitting models and observations: Radiation increases variance at wavelengths above 1,000 km, while advection damps variance across wavelengths, and surface fluxes mostly reduce variance between 1,000 and 10,000 km.

Beucler, Tom↗
DOE OSTI2023

Air Pollution Unable to Intensify Storms via Warm‐Phase Invigoration

Abstract According to the hypothesis of aerosol invigoration, the higher concentration of aerosols in polluted air intensifies storms. A leading theory for explaining such a relationship is warm‐phase invigoration, in which cloudy updrafts that are more polluted more readily condense water vapor onto liquid drops, thereby releasing latent heat faster, leading to higher buoyancies and higher updraft speeds. For this mechanism to work, water‐vapor supersaturations well in excess of 1% must be typical of relatively unpolluted cloudy updrafts. Here, the supersaturation is calculated from in situ observations of warm‐phase cloudy updrafts over the Amazon. Instead of values well in excess of 1%, the typical values are found to be around 0.2%. These observations imply that cleaner preindustrial air might have generated supersaturations around 1%, but those are still too low for warm‐phase invigoration to have any practically significant impact on cloud buoyancy and updraft speeds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Modeling Global Carbon Costs of Plant Nitrogen and Phosphorus Acquisition

Abstract Most Earth system models (ESMs) do not explicitly represent the carbon (C) costs of plant nutrient acquisition, which leads to uncertainty in predictions of the current and future constraints to the land C sink. We integrate a plant productivity‐optimizing nitrogen (N) and phosphorus (P) acquisition model (fixation & uptake of nutrients, FUN) into the energy exascale Earth system (E3SM) land model (ELM). Global plant N and P uptake are dynamically simulated by ELM‐FUN based on the C costs of nutrient acquisition from mycorrhizae, direct root uptake, retranslocation from senescing leaves, and biological N fixation. We benchmarked ELM‐FUN with three classes of products: ILAMB, a remotely sensed nutrient limitation product, and CMIP6 models; we found significant improvements in C cycle variables, although the lack of more observed nutrient data prevents a comprehensive level of benchmarking. Overall, we found N and P co‐limitation for 80% of land area, with the remaining 20% being either predominantly N or P limited. Globally, the new model predicts that plants invested 4.1 Pg C yr −1 to acquire 841.8 Tg N yr −1 and 48.1 Tg P yr −1 (1994–2005), leading to significant downregulation of global net primary production (NPP). Global NPP is reduced by 20% with C costs of N and 50% with C costs of NP. Modeled and observed nutrient limitation agreement increases when N and P are considered together ( r 2 from 0.73 to 0.83).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Mechanistic insights of enhanced spin polaron conduction in CuO through atomic doping

Abstract The formation of a “spin polaron” stems from strong spin-charge-lattice interactions in magnetic oxides, which leads to a localization of carriers accompanied by local magnetic polarization and lattice distortion. For example, cupric oxide (CuO), which is a promising photocathode material and shares important similarities with high T c superconductors, conducts holes through spin polaron hopping with flipped spins at Cu atoms where a spin polaron has formed. The formation of these spin polarons results in an activated hopping conduction process where the carriers must not only overcome strong electron−phonon coupling but also strong magnetic coupling. Collectively, these effects cause low carrier conduction in CuO and hinder its applications. To overcome this fundamental limitation, we demonstrate from first-principles calculations how doping can improve hopping conduction through simultaneous improvement of hole concentration and hopping mobility in magnetic oxides such as CuO. Specifically, using Li doping as an example, we show that Li has a low ionization energy that improves hole concentration, and lowers the hopping barrier through both the electron−phonon and magnetic couplings' reduction that improves hopping mobility. Finally, this improved conduction predicted by theory is validated through the synthesis of Li-doped CuO electrodes which show enhanced photocurrent compared to pristine CuO electrodes. We conclude that doping with nonmagnetic shallow impurities is an effective strategy to improve hopping conductivities in magnetic oxides.

Smart, Tyler J.↗
DOE OSTI2018

Unusual electronic and vibrational properties in the colossal thermopower material FeSb2

Abstract The iron antimonide FeSb 2 possesses an extraordinarily high thermoelectric power factor at low temperature, making it a leading candidate for cryogenic thermoelectric cooling devices. However, the origin of this unusual behavior is controversial, having been variously attributed to electronic correlations as well as the phonon-drag effect. The optical properties of a material provide information on both the electronic and vibrational properties. The optical conductivity reveals an anisotropic response at room temperature; the low-frequency optical conductivity decreases rapidly with temperature, signalling a metal-insulator transition. One-dimensional semiconducting behavior is observed along the b axis at low temperature, in agreement with first-principle calculations. The infrared-active lattice vibrations are also symmetric and extremely narrow, indicating long phonon relaxation times and a lack of electron-phonon coupling. Surprisingly, there are more lattice modes along the a axis than are predicted from group theory; several of these modes undergo significant changes below about 100 K, hinting at a weak structural distortion or phase transition. While the extremely narrow phonon line shapes favor the phonon-drag effect, the one-dimensional behavior of this system at low temperature may also contribute to the extraordinarily high thermopower observed in this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

MLL1 is regulated by KSHV LANA and is important for virus latency

Abstract Mixed lineage leukemia 1 (MLL1) is a histone methyltransferase. Kaposi's sarcoma-associated herpesvirus (KSHV) is a leading cause of malignancy in AIDS. KSHV latently infects tumor cells and its genome is decorated with epigenetic marks. Here, we show that KSHV latency-associated nuclear antigen (LANA) recruits MLL1 to viral DNA where it establishes H3K4me3 modifications at the extensive KSHV terminal repeat elements during primary infection. LANA interacts with MLL1 complex members, including WDR5, integrates into the MLL1 complex, and regulates MLL1 activity. We describe the 1.5-Å crystal structure of N-terminal LANA peptide complexed with MLL1 complex member WDR5, which reveals a potential regulatory mechanism. Disruption of MLL1 expression rendered KSHV latency establishment highly deficient. This deficiency was rescued by MLL1 but not by catalytically inactive MLL1. Therefore, MLL1 is LANA regulable and exerts a central role in virus infection. These results suggest broad potential for MLL1 regulation, including by non-host factors.

Tan, Min↗
DOE OSTI2022

On Residual Stresses and Reference Temperatures in Thermomechanical Simulations of Photovoltaic Modules Using the Finite Element Method

Thermomechanical simulation of photovoltaic (PV) modules using the finite element method (FEM) is a useful tool to evaluate module design features in terms of structural integrity, reliability, and durability. One of the main challenges in the numerical modeling of a PV module is the incorporation of residual stresses induced by the manufacturing process. Modeling assumptions and abstractions are necessary to limit the model complexity and reduce the computational time. However, oversimplifications and incorrect assumptions can lead to erroneous numerical results. Unfortunately, much simulation work still neglects process-induced stresses. This can lead to incorrect predictions of the stress-strain history and erroneous conclusions during the design process. In this work, we review current modeling practices for incorporating process-induced stresses, and contrast numerical models that consider residual stresses with those that neglect them. We find that the simulation objective and available material properties dictate which process steps need to be modeled, and explore in depth the modeling of residual stresses induced by the lamination process. We demonstrate that a simplified cooldown procedure at the beginning of the simulation can increase the model accuracy and discuss appropriate choices for starting and reference temperatures in the finite element model.

14 SOLAR ENERGY↗
DOE OSTI2020

Mechanism-Based Energy Regularization in Computational Modeling of Quasibrittle Fracture

Abstract Quasibrittle materials are featured by a strain-softening constitutive behavior under many loading scenarios, which could eventually lead to localization instability. It has long been known that strain localization would result in spurious mesh sensitivity in finite element (FE) simulations. Previous studies have shown that, for the case of fully localized damage, the mesh sensitivity can be mitigated through energy regularization of the material constitutive law. However, depending on the loading configuration and structural geometry, quasibrittle structures could exhibit a complex damage process, which involves both localized and diffused damage patterns at different stages of loading. This study presents a generalized energy regularization method that considers the spatial and temporal evolution of damage pattern. The method introduces a localization parameter, which describes the local damage pattern. The localization parameter governs the energy regularization of the constitutive model, which captures the transition from diffused to localized damage during the failure process. The method is cast into an isotropic damage model, and is further extended to rate-dependent behavior. The energy regularization scheme is directly incorporated into the kinetics of damage growth. The model is applied to simulate static and dynamic failures of ceramic specimens. It is shown that the present model is able to effectively mitigate the spurious mesh sensitivity in FE simulations of both types of failure. The present analysis demonstrates the essential role of mechanism-based energy regularization of constitutive relation in FE simulations of quasibrittle fracture.

Mechanics↗
DOE OSTI2017

In situ investigation of halide incorporation into perovskite solar cells

We report on the material chemistry following crystallization in the presence of water vapor of chlorinated formamidinium lead-triiodide (NH 2 CH = NH 2 PbI 3-x Cl x ) perovskite films. We found in-situ exposure to water vapor reduces, or possibly eliminates, the retention of chlorine (Cl) inside NH 2 CH = NH 2 PbI 3-x Cl x crystals. There is a strong tendency toward Cl volatility, which indicates the sensitivity of these materials for their integration into solar cells. The requisite for additional efforts focused on the mitigation of water vapor is reported. Based on the in situ results, hot casting (<100°C) in dry conditions demonstrates improved film coverage and Cl retention with efficiencies reaching 12.07%.

14 SOLAR ENERGY↗
NASA NTRS1984

A numerical scheme for the identification of hybrid systems describing the vibration of flexible beams with tip bodies

A cubic spline based Galerkin-like method is developed for the identification of a class of hybrid systems which describe the transverse vibration to flexible beams with attached tip bodies. The identification problem is formulated as a least squares fit to data subject to the system dynamics given by a coupled system of ordnary and partial differential equations recast as an abstract evolution equation (AEE) in an appropriate infinite dimensional Hilbert space. Projecting the AEE into spline-based subspaces leads naturally to a sequence of approximating finite dimensional identification problems. The solutions to these problems are shown to exist, are relatively easily computed, and are shown to, in some sense, converge to solutions to the original identification problem. Numerical results for a variety of examples are discussed.

Rosen, I. G.↗
NASA NTRS2002

Is Europa's Subsurface Water Ocean Warm?

Europa's subsurface water ocean may be warm: that is, at the temperature of water's maximum density. This provides a natural explanation of chaos melt-through events and leads to a correct estimate of the age of its surface. Additional information is contained in the original extended abstract.

Melosh, H. J.↗
DOE OSTI2018

EBSD analysis of surface and bulk microstructure evolution during interrupted tensile testing of a Fe-19Cr-12Ni alloy

Highlights: • Similar deformation structures are obtained for surface and bulk grains. • A lower strain is needed for twinning in surface grains than in bulk grains. • A reduced ability to cross-slip due to low SFE leads to an increasing LAB density. • Twinning reduces the dislocation slip length. • High strain-hardening rate is maintained up to high strains. - Abstract: The microstructure evolution in both surface and bulk grains in a pure Fe-19Cr-12Ni alloy has been analyzed using electron backscatter diffraction after tensile testing interrupted at different strains. Surface grains were studied during in situ tensile testing performed in a scanning electron microscope, whereas bulk grains were studied after conventional tensile testing. The evolution of the deformation structure in surface and bulk grains displays a strong resemblance but the strain needed to obtain a similar deformation structure is lower in the case of surface grains. Both slip and twinning are observed to be important deformation mechanisms, whereas deformation-induced martensite formation is of minor importance. Since the stacking fault energy (SFE) is low, ~17 mJ/m{sup 2}, dynamic recovery by cross slip of un-dissociated dislocations is unfavorable. This reduces the annihilation of dislocations which in turn leads to a significant increase of low angle boundaries with increasing strain. The low SFE also favors formation of deformation twins which reduces the slip distance, leading to a hardening similar to the Hall-Petch relation. The combination of a low ability for cross-slip and a reduced slip distance caused by twinning is concluded to be the main reason for maintaining a high strain-hardening rate up to strains close to necking.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of natural fractures on determining closure pressure

Abstract In Utah FORGE reservoir, eight pressure transient tests (microhydraulic fracturing and DFIT™) show natural fracture/pressure-dependent leakoff. This behavior may lead to misinterpretation of the closure pressure (proxy for minimum principal stress). The closure pressures obtained from DFIT™ (or microhydraulic fracturing) testing may reflect shear failure along natural fractures or discontinuities rather than tensile failure and lead to inaccurate estimates of the minimum principal stress. In pressure tests conducted at the Utah FORGE site showed that reactivation or opening of natural fractures intersecting the wellbore and were suggested by multiple closure events in DFIT™ tests. In addition, comparisons between the pre- and post-well-tests FMI logs show that there are populations of induced fracture and reactivated natural fractures which are mostly vertical and sub-vertical. In this study, DFIT™ (or microhydraulic fracturing) test analysis and numerical simulations were used to suggest that hydraulic shearing of critically stressed natural fractures can contribute to multiple closure signatures and possibly lead to incorrect determination of the minimum principal stress. As other authors have previously advocated, the DFIT™ test analyses and numerical simulations suggest that better estimations of minimum principal stress may be derived by injecting at relatively high rate and pressure and insuring that tensile breakdown is reached. In addition, extended shut-in period is required to determine accurate reservoir characteristics and fluid flow regime.

Nadimi, S.↗
DOE OSTI2015

Structure and magnetism of Sr{sub 3}NiSb{sub 2}O{sub 9}

The crystal structure of the perovskite-related oxide Sr{sub 3}NiSb{sub 2}O{sub 9} has been refined from X-ray and neutron powder diffraction data; space group P2{sub 1}/n, a=5.64381(2), b=5.62299(2), c=7.95687(3) Å, β=90.014(2)°. The structure has two crystallographically-distinct six-coordinate cation sites with occupancies Sb 0.97(1), Ni 0.03 and Sb 0.36, Ni 0.64. The magnetic susceptibility has been measured over the temperature range 2≤T/K≤300. Fitting data recorded in the temperature range 150<T/K<300 to the Curie–Weiss law resulted in µ{sub eff}=3.49(1) µ{sub B} per Ni{sup 2+}, θ=−138(1) K. Ferrimagnetic coupling in the vicinity of the antisite defects is suggested to be responsible for the enhanced susceptibility observed below ~90 K. The zero-field cooled susceptibility shows a maximum at 8.7 K that is not observed in the field-cooled susceptibility. Hysteresis is observed in M(H) at 2 K but not at 7.5 K. - Graphical abstract: Antisite defects on the B sites of perovskite-related Sr{sub 3}NiSb{sub 2}O{sub 9} lead to complex magnetic behaviour. - Highlights: • Sr{sub 3}NiSb{sub 2}O{sub 9} is a monoclinic perovskite. • The magnetic behaviour of Sr{sub 3}NiSb{sub 2}O{sub 9} at around 90 K can be attributed to antisite defects. • The magnetic behaviour of Sr{sub 3}NiSb{sub 2}O{sub 9} can be related to that of the relaxor ferromagnet La{sub 3}Ni{sub 2}SbO{sub 9}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Meso-scale microstructural agglomerate quantification in boron carbide using X-ray microcomputed tomography

Highlights: • First known quantification of agglomerate defect distributions comprising of carbonaceous and aluminum nitride phases B{sub 4}C. • In-depth statistical analyses of the size, orientation, and morphology of the defects. • The determination of directional dependence of the hot-pressing direction on the agglomerate distributions. - Abstract: Failure in brittle materials is governed, in part, by the specific microstructure of that material, with heterogeneous microstructures generally leading to reduced mechanical properties and performance. In ceramics used for armor, an increase in compressive strength can be an indicator of improved ballistic performance. In hot-pressed boron carbide (B{sub 4}C) ceramic plates, failure has been attributed to carbonaceous flakes observed on the fracture surfaces of failed specimens. However, this current work shows agglomerates, in addition to the carbonaceous flakes, are present in this boron carbide. The density and distribution of these agglomerates are believed to influence the ballistic performance. Therefore, it is of interest to improve the quantification of meso-scale microstructural agglomerates so that strategies can be developed to mitigate them. This work is focused on the microstructural characterization of dumbbell-shaped compression specimens that were machined from a single tile of pressure-aided densification (PAD) B{sub 4}C, using high-resolution micro-computed tomography (microCT). Large clusters of non-B{sub 4}C agglomerates, up to 125 μm in diameter, were observed in addition to the typical smaller carbonaceous flakes and aluminum-based phases. Agglomerate size distribution, orientation, morphology, and spacing were quantified both parallel and perpendicular to the pressing direction. This defect quantification provides valuable information for a better understanding of the material microstructure which is a critical step in improving armor materials for the future.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Crystal development during carbonation of lime-based mortars in different environmental conditions

Highlights: • High CO{sub 2} and DiloCarb® treatment favour advanced carbonation and self-healing. • In the lime mortar without ceramics, channel type pores occur in the aggregate border. • In the lime mortars with ceramics, vug type pores are produced in the binder during kneading. • The formation of tabular CaCO{sub 3} polymorphs caused an increase in stress leading to microshrinkage cracks. • The use of a ceramic provoked dissolution and then re-precipitation of more stable polymorphs. - Abstract: This study examines crystal development during the carbonation of lime mortars according to the additives used and curing conditions. Two types of samples were prepared, one with sand and the other one additionally including Roman ceramics. These mortars were cured: 1) by spraying with a carbonation accelerator product under laboratory conditions; 2) in a climate chamber under 20 °C, 60% relative humidity, and 1600 ppm CO{sub 2}; and 3) under laboratory conditions as controls. Polarized light microscopy, SEM-EDS and XRD were used at 28, 90, 120 and 180 days to monitor the carbonation process. Observations indicate the development of different CaCO{sub 3} polymorphs, which appeared as metastable phases. The early nucleation of a well-defined calcite phase as the most stable CaCO{sub 3} polymorph was only identified in the chamber-cured samples. Differences in the pore network were observed depending on the composition and morphology of the mortar components and the environmental curing conditions.

36 MATERIALS SCIENCE↗