Search NASA⌕ Search

SEARCH · Search NASA

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Temperature-programmed elimination of tritium in coal labeled by tritiated gaseous hydrogen

The hydrogen exchange of an Argonne Pocahontas No. 3 (POC) coal with tritiated gaseous hydrogen in the presence of a Pt/Al{sub 2}O{sub 3} catalyst was carried out using a fixed-bed reactor at a temperature range of 200-250{sup o}C. Then, the tritiated coal sample was re-exchanged with hydrogen in a gaseous hydrogen atmosphere at different raising temperature rates. The changes in radioactivity of tritium releasing from the tritium-labeled coal sample in the temperature-programmed elimination (TPE) of tritium was monitored by a radioanalyzer in situ. The release profile of tritium was fit using three Gaussian distribution functions in TPE. On the basis of the waveform analysis, the amounts and activation energies of the hydrogen exchange for every type of exchangeable hydrogen were estimated. The values of exchange activation energies are 8.8 {+-} 0.5, 10.7 {+-} 0.5, and 16.3 {+-} 0.5 kcal/mol for three types of exchangeable hydrogen, respectively. The amount of type-I hydrogen was independent of the exchange reaction temperature. In contrast to this, the amount of types II and III of exchangeable hydrogen increased with an increasing exchange temperature, suggesting that the amount of types II and III of hydrogen in the coal is dependent upon the exchange temperature. 35 refs., 8 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

A comparison study of carbon dioxide adsorption on polydimethylsiloxane, silica gel, and Illinois No. 6 coal using in situ infrared spectroscopy

Adsorption of supercritical carbon dioxide (CO{sub 2}) on polydimethylsiloxane (PDMS), silica gel (SiO{sub 2}), and Illinois No. 6 coal was compared using in situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy at pressures up to 14 MPa and temperatures at 40{sup o}C and 50{sup o}C. Only physical adsorption of CO{sub 2} was recorded for PDMS, SiO{sub 2}, and Illinois no. 6. There was no evidence of the formation of carbonic acid, bicarbonates, carbonates, or any other reaction product between CO{sub 2} and PDMS, SiO{sub 2}, and Illinois No. 6 coal. Carbon dioxide adsorption on PDMS and SiO{sub 2} produced a linear isotherm while a typical Langmuir-like isotherm was observed for Illinois No. 6 coal. Attempts to measure CO{sub 2} induced swelling of the three materials was unsuccessful due to the design of the ATR-FTIR cell. 51 refs., 7 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Distribution of polycyclic aromatic hydrocarbons in fly ash during coal and residual char combustion in a pressurized fluidized bed

To investigate the distribution of polycyclic aromatic hydrocarbons (PAHs) in fly ash, the combustion of coal and residual char was performed in a pressurized spouted fluidized bed. After Soxhlet extraction and Kuderna-Danish (K-D) concentration, the contents of 16 PAHs recommended by the United States Environmental Protection Agency (U.S. EPA) in coal, residual char, and fly ash were analyzed by a high-performance liquid chromatography (HPLC) coupled with fluorescence and diode array detection. The experimental results show that the combustion efficiency is lower and the carbon content in fly ash is higher during coal pressurized combustion, compared to the residual char pressurized combustion at the pressure of 0.3 MPa. Under the same pressure, the PAH amounts in fly ash produced from residual char combustion are lower than that in fly ash produced from coal combustion. The total PAHs in fly ash produced from coal and residual char combustion are dominated by three- and four-ring PAHs. The amounts of PAHs in fly ash produced from residual char combustion increase and then decrease with the increase of pressure in a fluidized bed. 21 refs., 1 fig., 4 tabs.

01 COAL, LIGNITE, AND PEAT↗

Structural characteristics and gasification reactivity of chars prepared from K{sub 2}CO{sub 3} mixed HyperCoals and coals

HyperCoal is a clean coal with mineral matter content <0.05 wt %. Oaky Creek (C = 82%), and Pasir (C = 68%) coals were subjected to solvent extraction method to prepare Oaky Creek HyperCoal, and Pasir HyperCoal. Experiments were carried out to compare the gasification reactivity of HyperCoals and parent raw coals with 20, 40, 50 and 60% K{sub 2}CO{sub 3} as a catalyst at 600, 650, 700, and 775{sup o}C with steam. Gasification rates of coals and HyperCoals were strongly influenced by the temperature and catalyst loading. Catalytic steam gasification of HyperCoal chars was found to be chemical reaction controlled in the 600-700{sup o}C temperature range for all catalyst loadings. Gasification rates of HyperCoal chars were found to be always higher than parent coals at any given temperature for all catalyst loadings. However, X-ray diffraction results showed that the microstructures of chars prepared from coals and HyperCoals were similar. Results from nuclear magnetic resonance spectroscopy show no significant difference between the chemical compositions of the chars. Significant differences were observed from scanning electron microscopy images, which showed that the chars from HyperCoals had coral-reef like structures whereas dense chars were observed for coals. 26 refs., 8 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

X-ray absorption near edge structure spectrometry study of nickel and lead speciation in coals and coal combustion products

The fate and environmental impacts of trace elements from coal fired power stations are a significant concern because of the large quantities of coal used as an energy source. The ultimate environmental fate and health impact of some of these trace elements is dependent on their various forms and oxidation states. Nickel and lead are two of the trace elements classified as 'priority pollutants' by the National Pollutant Inventory (NPI) in Australia. This study attempts to understand speciation of nickel and lead in coal and coal combustion products from five coal fired power stations in Australia where bituminous rank coals are utilized. Non-destructive X-ray Absorption Near Edge Structure Spectrometry (XANES) was used to determine speciation of these metals. Semiquantitative speciation of nickel and lead was calculated using a linear combination fit of XANES spectra obtained for selected pure reference compounds. In all fly ash samples, 28-80% of nickel was present as nickel in NiSO{sub 4} form, which is a more toxic and more bioavailable form of nickel. Less toxic NiO was detected in fly ash samples in the range of 0-15%. Speciation of lead revealed that 65-70% is present as PbS in the feed coals. In all fly ash samples analyzed, lead comprised different proportions of PbCl{sub 2}, PbO, and PbSO{sub 4}. PbCl{sub 2} and PbSO{sub 4} contents varied between 30-70% and 30-60%, respectively. Chemical reactions resulting in nickel and lead transformation that are likely to have occurred in the post-combustion environment are discussed. 22 refs., 7 figs., 7 tabs.

01 COAL, LIGNITE, AND PEAT↗

Pyrolysis behavior of weakly reductive coals from Northwest China

Pyrolysis behaviors of three weakly reductive coals from Northwest China and one reductive Pingshuo (PS) coal were investigated in a thermogravimetric analyzer and a fixed-bed reactor. The results show that the pyrolysis behaviors of the weakly reductive coals are obviously different from that of the reductive coal despite their similar elemental composition. Compared with PS coal, the weakly reductive coals exhibit a lower weight loss and a lower rate of weight loss, and the peaks corresponding to the maximum rate of weight loss shift to high temperature. During pyrolysis in a fixed-bed reactor, the conversion and tar and gas yields of all the coals increase with temperature. The weakly reductive coals have lower conversions and tar yields than PS coal in the temperature range investigated, which is accordant with the weight loss in thermogravimetric analysis. The tars from coal pyrolysis were characterized by FT-IR, ultimate analysis, and {sup 1}H NMR, and the combustion behavior of chars from different coals was compared on a thermogravimetric analyzer. 28 refs., 6 figs., 9 tabs.

01 COAL, LIGNITE, AND PEAT↗

New approach to understanding NO emission during bubbling fluidized bed coal combustion: separation of NO formation and reduction processes in the bed

A new approach for separately evaluating NO formation and NO reduction during coal combustion in a fluidized bed was investigated. Sixteen different coals were burned in a laboratory-scale bubbling fluidized bed combustor with three different char loadings, which were established by changing the inlet oxygen concentrations. NO conversion ratios (X{sub NO} = the ratio of the mass of N atoms in the emitted NO to the mass of N atoms in the coal) were determined for the coals, and then 'ultimate NO conversion ratios' (X{sub NO}*) were obtained by extrapolation of the lines describing the dependence of X{sub NO} on O{sub 2} consumption rate to an O{sub 2} consumption rate of zero. The X{sub NO}* values correspond to the values that would be obtained for a single coal particle burning in the absence of char particles. Using this technique, the contribution of char particles to NO reduction was evaluated. The X{sub NO}* values depended on the N content and the O/N molar ratio of the coals. The bed temperature dependences of the sensitivity values (the slopes of the lines describing the dependence of X{sub NO} on O{sub 2} consumption rate), which include the contribution of NO reduction by char particles, differed substantially for the different coals. However, char loading had no clear effect on N{sub 2}O emission. This result suggests that the reduction by the char particles involves the competitive reaction of NO and N{sub 2}O, and the effect of the N{sub 2}O reduction by burning char particles was less than NO reduction. Our results indicate the importance of taking into account the effects of NO reduction by char particles on overall NOx emissions during fluidized bed combustion of coal. 19 refs., 14 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Insights into the coal extractive solvent N-methyl-2-pyrrolidone + carbon disulfide

A wide set of experimental and computational tools were used to characterize the N-methyl-2-pyrrolidone (NMP) + carbon disulfide mixed solvent in the full composition range. The interest in this solvent rose from its very efficient use for coal extraction through a mechanism still not fully understood. Thermophysical properties at ambient pressure together with pressure-volume-temperature (PVT) behavior were measured with the objective of providing the required data for the industrial use of the mixed fluid and to get insight into the fluid structure at the molecular level. NMR, FTIR, and solvatochromic studies were performed together with microwave dielectric relaxation spectroscopy (DRS) measurements, thus providing more information on the fluid's structure and allowing one to relate the molecular level behavior with the measured macroscopic properties. Moreover, density functional theory (DFT) and classical molecular dynamics simulations (MD) were used to obtain a detailed picture of the intermolecular interactions within the fluid, at short and long ranges, and of other relevant features leading to the structure of the studied system. The whole study leads to a fluid's picture in which carbon disulfide hinders the development of NMP/NMP intermolecular dipolar interactions, thus increasing the monomer population. We should remark that some properties reported in this work are in remarkable disagreement with previously reported studies, the most important one being the positive excess molar volume in the whole pressure-temperature range studied, which contrasts with the negative values reported in the literature. Previously reported properties are hardly justified with a coherent molecular level picture, whereas the whole collection of properties reported in this work leads to a more reasonable fluid's structure. 56 refs., 17 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Adsorption of pure carbon dioxide on wet Argonne coals at 328.2 K and pressures up to 13.8 MPa

Carbon dioxide (CO{sub 2}) adsorption isotherms were measured on five different rank coals at 328.2 K and pressures up to 13.8 MPa using a volumetric method. Specifically, Beulah Zap, Illinois no.6, Pocahontas No.3, Upper Freeport, and Wyodak coals from the Argonne premium coal sample program were used for these isotherm measurements. These newly acquired data are compared to our previous data on dry coals. As expected, the adsorption on the wet coals is lower than that on the dry coals. At 7 MPa, Pocahontas, Upper Freeport, Illinois no. 6, Wyodak, and Beulah Zap coals exhibited, respectively, about 19, 17, 48, 76, and 79% reduction in the amount adsorbed on the wet coal when compared to the adsorption on the dry coal. These reductions in CO{sub 2} adsorption correlate positively with the amount of moisture present on the coal. The isotherms on wet coals were measured at their equilibrium moisture content. The adsorption isotherm for each of the wet coals exhibited a Gibbs adsorption maximum between 8 and 12 MPa and occurred at a higher pressure than that of the dry coal. The simplified local-density/Peng-Robinson model was used to correlate the adsorption data. The model was found capable of representing precisely the CO{sub 2} adsorption on both dry and wet coals. Specifically, the overall weighed average absolute deviation (WAAD) for the five dry and wet coals was 0.99 and 0.42, respectively. Nevertheless, more rigorous accounting for the water interactions with the coal matrix and the competitive adsorption between water and CO{sub 2} would provide an even more realistic description of coal-bed gas adsorption phenomenon on wet coals. 43 refs., 10 figs., 9 tabs.

01 COAL, LIGNITE, AND PEAT↗

Carbonation and hydration characteristics of dry potassium-based sorbents for CO{sub 2} capture

Thermogravimetric apparatus (TGA) and X-ray diffraction (XRD) have been used to study the characteristics of potassium-based sorbents for CO{sub 2} capture. The carbonation reactivity of K{sub 2}CO{sub 3}.1.5H{sub 2}O and K{sub 2}CO{sub 3} dehydrated from K{sub 2}CO{sub 3}. 1.5H{sub 2}O was weak. However, K{sub 2}CO{sub 3} calcined from KHCO{sub 3} showed excellent carbonation capacity and no deactivation of sorbents during multiple cycles. The XRD results showed that the sample dehydrated from K{sub 2}CO{sub 3}1.5H{sub 2}O was K{sub 2}CO{sub 3} with structure of monoclinic crystal (PCNo.1). The carbonation products of PCNo.1 included K{sub 2}CO{sub 3}.1.5H{sub 2}O and KHCO{sub 3}, and K{sub 2}CO{sub 3}. 1.5H{sub 2}O was the main product. Correspondingly, K{sub 2}CO{sub 3} with structure of hexagonal crystal (PCNo.2) was the product calcined from KHCO{sub 3}, and the main carbonation product of PCNo.2 was KHCO{sub 3}. The byproduct of K{sub 4}H{sub 2}(CO{sub 3})3.1.5H{sub 2}O for PCNo.2 would affect the carbonation processes. Hydration tests confirmed the two hypotheses: the hydration reaction will first occur for K{sub 2}CO{sub 3} with structure of monoclinic crystal, and the carbonation reaction will first occur for K{sub 2}CO{sub 3} with structure of hexagonal crystal. The reaction principles were analyzed by product and the relevant reactions. This investigation can be used as basic data for dry potassium-based sorbents capturing CO{sub 2} from flue gas. 20 refs., 7 figs.

01 COAL, LIGNITE, AND PEAT↗

Characterization of ash deposition and heat transfer behavior of coals during combustion in a pilot-scale facility and full-scale utility

Experimental measurements as well as theoretical models were used to investigate the impact of mineral matter of three coals on ash deposition and heat transfer for pulverized coal fired boilers. The ash deposition experiments were conducted in a pulverized fuel combustion pilot-scale facility and a full-scale unit. A mathematical model with input from computer-controlled scanning electron microscopy analysis of coal minerals was used to predict the effect of ash deposition on heat transfer. The predicted deposit thickness and heat flux from the model are shown to be consistent with the measurements in the test facility. The model differentiates the coals according to the deposits they form and their effect on heat transfer. The heat transfer predictions in the full-scale unit were found to be most suitable for the water wall under the furnace nose. The study demonstrates that the measurements in a full-scale unit can differ significantly from those in pilot-scale furnaces due to soot-blowing operations. 9 refs., 12 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Fly ash properties and mercury sorbent affect mercury release from curing concrete

The release of mercury from concrete containing fly ashes from various generator boilers and powdered activated carbon sorbent used to capture mercury was measured in laboratory experiments. Release of gaseous mercury from these concretes was less than 0.31% of the total quantity of mercury present. The observed gaseous emissions of mercury during the curing process demonstrated a dependency on the organic carbon content of the fly ash, with mercury release decreasing with increasing carbon content. Further, lower gaseous emissions of mercury were observed for concretes incorporating ash containing activated carbon sorbent than would be expected based on the observed association with organic carbon, suggesting that the powdered activated carbon more tightly binds the mercury as compared to unburned carbon in the ash. Following the initial 28-day curing interval, mercury release diminished with time. In separate leaching experiments, average mercury concentrations leached from fly ash concretes were less than 4.1 ng/L after 18 h and 7 days, demonstrating that less than 0.02% of the mercury was released during leaching. 25 refs., 4 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

CO{sub 2} adsorption-based separation by metal organic framework (Cu-BTC) versus zeolite (13X)

The potential for the metal organic framework (MOF) Cu-BTC to selectively adsorb and separate CO{sub 2} is considered. Isotherms for CO{sub 2}, CH{sub 4}, and N{sub 2} were measured from 0 to 15 bar and at temperatures between 25 and 105{sup o}C. The isotherms suggest a much higher working capacity (x4) for CO{sub 2} adsorption on Cu-BTC relative to the benchmark zeolite 13X over the same pressure range. Higher CO{sub 2}/N{sub 2} and CO{sub 2}/CH{sub 4} selectivities in the higher pressure range (1-15 bar) and with lower heats of adsorption were also demonstrated. Cu-BTC was observed to be stable in O{sub 2} at 25{sup o}C, but its crystallinity was reduced in humid environments. The CO{sub 2} adsorption capacity was progressively reduced upon cyclic exposure to water vapor at low relative humidity (<30%), but leveled out at 75% of its original value after several water adsorption/desorption cycles. 27 refs., 1 fig.

01 COAL, LIGNITE, AND PEAT↗

Study on the effect of heat treatment and gasification on the carbon structure of coal chars and metallurgical cokes using fourier transform Raman spectroscopy

Differences in the development of carbon structures between coal chars and metallurgical cokes during high-temperature reactions have been investigated using Raman spectroscopy. These are important to differentiate between different types of carbons in dust recovered from the top gas of the blast furnace. Coal chars have been prepared from a typical injectant coal under different heat-treatment conditions. These chars reflected the effect of peak temperature, residence time at peak temperature, heating rate and pressure on the evolution of their carbon structures. The independent effect of gasification on the development of the carbon structure of a representative coal char has also been studied. A similar investigation has also been carried out to study the effect of heat-treatment temperature (from 1300 to 2000{sup o}C) and gasification on the carbon structure of a typical metallurgical coke. Two Raman spectral parameters, the intensity ratio of the D band to the G band (I{sub D}/I{sub G}) and the intensity ratio of the valley between D and G bands to the G band (I{sub V}/I{sub G}), have been found useful in assessing changes in carbon structure. An increase in I{sub D}/I{sub G} indicates the growth of basic graphene structural units across the temperature range studied. A decrease in I{sub V}/I{sub G} appears to suggest the elimination of amorphous carbonaceous materials and ordering of the overall carbon structure. The Raman spectral differences observed between coal chars and metallurgical cokes are considered to result from the difference in the time-temperature history between the raw injectant coal and the metallurgical coke and may lay the basis for differentiation between metallurgical coke fines and coal char residues present in the dust carried over the top of the blast furnace. 41 refs., 17 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Prediction of Chinese coal ash fusion temperatures in Ar and H{sub 2} atmospheres

The ash fusion temperatures (AFTs) of 21 typical Chinese coal ash samples and 60 synthetic ash samples were measured in Ar and H{sub 2} atmospheres. The computer software package FactSage was used to calculate the temperatures corresponding to different proportions of the liquid phase and predict the phase equilibria of synthetic ash samples. Empirical liquidus models were derived to correlate the AFTs under both Ar and H{sub 2} atmospheres of 60 synthetic ash samples, with their liquidus temperatures calculated by FactSage. These models were used to predict the AFTs of 21 Chinese coal ash samples in Ar and H{sub 2} atmospheres, and then the AFT differences between the atmospheres were analyzed. The results show that, for both atmospheres, there was an apparently linear correlation and good agreement between the AFTs of synthetic ash samples and the liquidus temperatures calculated by FactSage (R > 0.89, and {sigma} < 30{sup o}C). These models predict the AFTs of coal ash samples with a high level of accuracy (SE < 30{sup o}C). Because the iron oxides in coal ash samples fused under a H{sub 2} atmosphere are reduced to metallic iron and lead to changes of mineral species and micromorphology, the AFTs in a H{sub 2} atmosphere are always higher than those with an Ar atmosphere. 34 refs., 9 figs., 7 tabs.

01 COAL, LIGNITE, AND PEAT↗

Effect of fuel type and deposition surface temperature on the growth and structure of an ash deposit collected during co-firing of coal with sewage sludge and sawdust

Blends of a South African bituminous 'Middleburg' coal, a municipal sewage sludge, and a sawdust have been fired in the slagging reactor to examine the effect of the added fuel on the slagging propensity of the mixtures. Uncooled ceramic probes and air-cooled metal probes were used to examine the influence of the deposition surface temperature on the growth and structureof the deposits. The initial stages of slagging were in a high-temperature range of 1100-1300{sup o}C and a low-temperature range of 550-700{sup o}C. Laboratory ash, ash sampled on the deposition probes, and ash collected in the cyclone have been analyzed using the X-ray fluorescence technique. The electron probe microanalysis (EPMA) of the embedded resin deposit probes have been performed to determine the thickness, structure, porosity, and chemical composition in different layers of the deposit. Distinct differences in structures of the deposits collected using the uncooled ceramic probes and air-cooled steal probes were observed. Glassy, easily molten deposits collected on uncooled ceramic deposition probes are characteristic for co-firing of municipal sewage sludge with coal. Porous, sintered, but easily removable deposits of the same fuel blend have been collected on the air-cooled metal deposition probes. The addition of sawdust does not negatively influence the deposition behavior. Loose, easy removable deposits have been sampled on air-cooled metal deposition probes during co-firing of coal-sawdust blends. The mass of the deposit sampled at lower deposition surface temperatures (550-700{sup o}C) was always larger than the mass sampled at higher surface temperatures (1100-1300{sup o}C). 12 refs., 6 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Use of oscillatory shear rheometry and thermogravimetric analysis to examine the microstructural changes during coal pyrolysis/carbonization for the prediction of IRSID strength indices

During pyrolysis and carbonization of coal, the viscoelastic properties vary across a wide range, with complex viscosity ({eta}*) decreasing to as low as 100 Pa s before increasing to approximately 10{sup 8} Pa s and phase angle {delta} varying from close to 90{sup o} (Newtonian liquid) down to 0{sup o} (Hookean solid). A new rheometry method has been developed that combines tests using 25 and 8 mm plates to enable measurements of the entire resolidification process. When combined with thermogravimetric analysis, the method has provided new insights into the mechanisms leading to high and low IRSID I40 strength indices. Although coals with very different volatile matter contents have similar rates of volatile release above 475{sup o}C, viscoelastic properties above this temperature are highly variable. From a study of 13 coals, all coals for which {delta} < 55{sup o} at 475{sup o}C had an I40 index < 44%, while all coals for which {delta} > 65{sup o} at 475 {sup o}C had an I40 index > 44%. It is thought that, when {delta} < 55{sup o}, the material is less able to deform and accommodate the loss of mass/volume, causing it to crack/fissure. However, when the {delta} > 65{sup o} and stays high until higher temperatures, the material is able to contract as volatiles are released without fissuring, ultimately leading to a higher I40 index. A relationship between the final storage modulus (G') of the material and the I10 index was also found, whereby a low G' corresponded to a high I10 index. Greater understanding of the relationships between viscoelasticity and pore/fissure network development could enable more precise relationships to be developed, ultimately leading to improved methods for predicting coke quality and devising strategies to make high-quality coke from various sources. 12 refs., 13 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗