Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Measurement of dysprosium optical constants in the 2-830 eV spectral range using a transmittance method, and compilation of the revised optical constants of lanthanum, terbium, neodymium, and gadolinium

The optical constants {beta}, {delta} of the complex refractive index (n=1-{delta}+i{beta}) of Dy were obtained in the 2-830 eV energy range using a novel transmittance method. Si/W/Dy/W films were deposited by dc-magnetron sputtering on Si photodiode substrates, and the transmittance was characterized using synchrotron radiation. The extinction coefficients {beta} of Dy and the transmittance of a Si capping layer and two W interface barrier layers as functions of energy were solved simultaneously using a nonlinear optimization routine. The measured transmittances of the capping and barrier layers were primarily used as indicators for any flaws in the transmittance results. The dispersion coefficients {delta} of Dy were calculated using the Kramers-Kronig integral, and a complete set of {beta} values required for this integral was obtained by combining the present data with data from the literature. Sum rule tests on Dy show some deficiencies in the present data, which may be attributed to lower film density compared with the bulk value. Similar procedures were applied to previously measured transmittances of B4C/La, Si/Tb, Si/Nd, and Si/Gd films, where B4C or Si were used as capping layers on those reactive rare-earth films. The improved sets of transmittance values of B4C and Si capping layers were used as input in the optimization routine to solve for more accurate {beta} values of La, Tb, Nd, and Gd. The revised optical constants of these materials, tested for consistency with partial sum rules, are also reported.

36 MATERIALS SCIENCE↗

Investigating the Chemical Reactivity of Lithium Silicate Model SEI Layers

Silicon anodes suffer from an unstable solid electrolyte interphase (SEI) layer that contributes to undesirable capacity fade with cycling. A key part to addressing this unstable SEI formation is to examine how certain components of the SEI react with the electrolyte over time. One SEI component that has not been thoroughly studied in the context of the chemical reactivity against the electrolyte is lithiated silicate. Four model silicate thin films with increasing lithium content were deposited by radio frequency (RF) magnetron sputtering to study how the lithiation of the native oxide on a silicon anode affects the chemical stability of the anode surface. SiO2, Li2Si2O5, Li2SiO3, and Li3SiOx films were exposed to 1.2 M LiPF6 in the 3:7 wt% ethylene carbonate/ethyl methyl carbonate (EC/EMC) electrolyte for periods of time that are representative of the amount of time it takes to undergo cell formations. Soaked samples were rinsed, dried, and characterized by a combination of attenuated total reflectance-infrared spectroscopy (ATR-IR), focused ion beam-secondary electron microscopy (FIB-SEM), and X-ray photoelectron spectroscopy (XPS) depth profiling. It was found that the rate of the decrease in film thickness of the silicates exposed to the electrolyte over time increases as a function of the lithium content in the thin film. This reaction involves HF etching and LiPF6 salt degradation leading to silicate loss and fluorination throughout the bulk. Understanding this chemical instability is critical to determining the overall mechanism of SEI degradation over time.

ADVANCED PROPULSION SYSTEMS,ENERGY STORAGE↗

Fabrication and characterization of lithium manganese nickel oxide sputtered thin film cathodes for lithium-ion batteries

Li-rich and stoichiometric Li1Mn1.5Ni0.5O4 (LMNO) cathode films have been prepared by magnetron sputtering. Sputtering from a Li stoichiometric target yields Li-rich films composed of spinel, layered and monoclinic phases. Films obtained from a Li deficient target are mostly made of a spinel phase and little layered material. The resulting cathode thin films have good capacity retention and very high rate capability. The reaction mechanism has been investigated by XRD and HRTEM and evidences the reversible formation of a spinel phase, as is also found for the powder samples. The film geometry enables to understand the effect of coatings (ZnO or LiPON). Coating high voltage cathodes reduces the coulombic losses but at the price of rate performance. Nonetheless, these coated sputtered electrode thin films offer a higher rate capability than other LMNO thin films obtained by other physical vapor deposition techniques.

25 ENERGY STORAGE↗

ODU Optimization of Nb3Sn supttering on SRF structures

High efficiency Superconducting radio-frequency (SRF) cavities are the key technology to cost-effective Continuous Wave (CW) SRF accelerators. Recent advances in Nb3Sn coatings on the inner surface of SRF cavities showed the potential for this material to significantly cut the capital and operating cost of SRF accelerators. The best results are presently achieved with Nb3Sn films coated by using the so-called vapor diffusion technique. Several alternative approaches have been and are being investigated such as electrochemical deposition, bronze routes, and sputtering. Among these techniques, magnetron sputtering is a versatile technique, which has been demonstrated to deposit Nb3Sn films on SRF cavities. The technique requires further development to compete with the results demonstrated on the cavities coated with the vapor diffusion techniques. The team to develop the novel technique includes a graduate student from Old Dominion University (ODU) and other experts. ODU Prof. Elsayed-Ali directs the graduate student to coat samples and cavities in the new coating system and analyze samples with different surface science techniques. Dr. Grigory Eremeev from Fermilab assists with 2.6 GHz cavities for coating, cavity characterization at cryogenic temperature, and result analysis. The research is funded by the Office of High Energy Physics at the US Department of Energy at both Fermilab and ODU

43 PARTICLE ACCELERATORS↗

Synthesis of model sodium sulfide films

We report the direct deposition of model sodium sulfide films by RF magnetron sputtering from Na 2 S and Na 2 S 2 deposition targets. Analytical characterization and electrochemical cycling indicate that the deposited films are amorphous with stoichiometries that correspond to Na 2 S 3 and Na 2 S 2 formed from the Na 2 S and Na 2 S 2 targets, respectively. We propose that the loss of Na in the case of the Na 2 S target is due to preferential sputtering of Na resulting from the higher energy required to break the Na–S bonds in Na 2 S. Here, the development of thin film sodium sulfides opens a new route to understanding their fundamental properties, such as Na + transport, conductivity, and reactivity.

preferential sputtering↗

Controlling ion fluxes during reactive sputter-deposition of SnO{sub 2}:F

Magnetron sputtering of fluorine-doped tin oxide (FTO) is a scalable deposition method for large-area transparent conducting films used in fenestration, photovoltaics, and other applications. The electrical conductivity of sputtered FTO is, however, lower than that of spray-pyrolized FTO because of the ion damage induced by high energy ions leading to a reduction of the crystal quality in sputtered FTO films. In this study, various ion species present during the reactive sputtering of a metallic tin target in a mixed Ar/O{sub 2}/CF{sub 4} atmosphere are systematically characterized by energy and mass spectrometry, and possible ways of controlling the ion fluxes are explored. Ion energy distribution functions (IEDFs) of the negative ions F{sup −} and O{sup −} exhibit large peaks at an energy corresponding to the full target voltage. Although the applied partial pressure of CF{sub 4} is about 1/30 than that of O{sub 2}, the obtained IEDFs of F{sup −} and O{sup −} have comparable peak height, which can be attributed to a higher electronegativity of F. The IEDFs of positively charged O{sup +}, O{sub 2}{sup +}, Ar{sup +}, and Sn{sup +} species have their peaks around 2–8 eV. To control ion fluxes a solenoid or permanent magnets were placed between the target and the mass spectrometer. The flux of positive ions could be varied by several orders of magnitude as a function of the applied current through the solenoid, whereas the high-energy (>100 eV) negative F{sup −} and O{sup −} ions were not notably deflected. By using permanent magnets with the B-field orthogonal to the ion trajectory, the flux of O{sup −} ions could be decreased by two orders and the exposure to the high-energy F{sup −} ions was completely suppressed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Method for sequentially processing a multi-level interconnect circuit in a vacuum chamber

The processing of wafer devices to form multilevel interconnects for microelectronic circuits is described. The method is directed to performing the sequential steps of etching the via, removing the photo resist pattern, back sputtering the entire wafer surface and depositing the next layer of interconnect material under common vacuum conditions without exposure to atmospheric conditions. Apparatus for performing the method includes a vacuum system having a vacuum chamber in which wafers are processed on rotating turntables. The vacuum chamber is provided with an RF sputtering system and a DC magnetron sputtering system. A gas inlet is provided in the chamber for the introduction of various gases to the vacuum chamber and the creation of various gas plasma during the sputtering steps.

Routh, D. E.↗

Method for sequentially processing a multi-level interconnect circuit in a vacuum chamber

An apparatus is disclosed which includes a vacuum system having a vacuum chamber in which wafers are processed on rotating turntables. The vacuum chamber is provided with an RF sputtering system and a dc magnetron sputtering system. A gas inlet introduces various gases to the vacuum chamber and creates various gas plasma during the sputtering steps. The rotating turntables insure that the respective wafers are present under the sputtering guns for an average amount of time such that consistency in sputtering and deposition is achieved. By continuous and sequential processing of the wafers in a common vacuum chamber without removal, the adverse affects of exposure to atmospheric conditions are eliminated providing higher quality circuit contacts and functional device.

Routh, D. E.↗

"CHON" particles: The interstellar component of cometary dust

Interstellar dust is characterized by strong absorption in the ultraviolet and the mid-IR. Current models of interstellar dust are based on three chemically distinct components: a form of carbon (usually graphite), a silicate, and a blend of polycyclic aromatic hydrocarbons or other carbonaceous material. Previous work using effective medium theories to understand the optical properties of cometary dust suggested that an amalgam of materials could reproduce the observed interstellar and cometary dust features. Recently, Lawler and Brownlee (1992) re-analyzed the PIA and PUMA-1 data sets from the Giotto flyby of P/Halley and discovered that the so-called "CHON" particles were actually composed of a blend of carbon-bearing and silicon-bearing materials. Based on effective medium theories, the absorption spectrum of such a material would display the spectral features of each of the components - strong UV absorption from the carbonaceous component and strong absorption in the IR from the silicate component. To test this idea, vapor-deposited samples were created using two different deposition techniques: sputtering with an argon RF magnetron and deposition from an argon plasma torch. Two different compositions were tested: a blend of graphite and silica in a 7:1 ratio and an amalgam of materials whose approximate composition matches the "CHON"-silicate abundances for the uncompressed PIA data set of Lawler and Brownlee: graphite, iron oxide, magnesium oxide, ammonium sulfate, calcium carbonate, and silica in mass ratios of 6:4.3:4:2.2:1:9. The samples were finely ground and pressed into 2" diameter disks using a 40 ton press. In all, four different experiments were performed: one with each of the compositions (C:SiO and "CHON") in both the RF magnetron and the plasma torch chambers. The RF magnetron created a uniform dark thin film on the substrate surface, and the plasma torch created a coating of small (<100 micron) diameter grey particles. The spectra of all four samples show a strong, broad absorption feature at around 220 nm as well as a strong but narrower absorption peak near 10 microns. The RF magnetron sputtered samples showed some sub-structure in the UV, and the peak of the absorption was shifted toward longer wavelengths. The UV absorption in the plasma torch deposited samples have no sub-structure, and the peak absorption is very near 220 nm. Strong absorption near 9 microns is seen in the spectra from both sample preparation techniques, and is consistent with the IR spectra of some terrestrial silicates. Other features, particularly at 6.2 and 8.6 microns, are seen in the interstellar medium. A strong feature near 2 microns is due to absorbed water in the sample. Based on the results of these experiments, there is evidence that a material with a composition similar to that detected in "CHON" particles in the coma of P/Halley have a spectral signature which reproduces the main absorption features of interstellar dust. This suggests that the "CHON" particles could be the interstellar component of cometary dust.

Lien, David J.↗

Crystallization of TiO 2 polymorphs from RF-sputtered, amorphous thin-film precursors

Crystalline TiO 2 films of anatase, brookite, and rutile are reproducibly made from amorphous precursors deposited by RF magnetron sputtering, producing large-area, single phase films of uniform thickness. Sputtered amorphous TiO 2 precursor thin films follow the general behavior observed for amorphous precursor thin films generated by pulsed laser deposition, namely, that oxygen deficiency is necessary for the formation of brookite and rutile. We quantify the oxygen deficiency and correlate it with the long wavelength optical absorption. We find that the precursor deposition rate is also a contributing factor to phase selection and that brookite and rutile form from films deposited more rapidly and anatase from films deposited more slowly. Sputtered and pulsed laser deposited amorphous precursor films prepared with similar oxygen deficiency and similar thickness result in the same final state after annealing, but the rate for sputtered precursors is slower.

14 SOLAR ENERGY↗

Effect of substrate temperature on the magnetic properties of epitaxial sputter-grown Co/Pt

Epitaxial Co/Pt films have been deposited by dc-magnetron sputtering onto heated C-plane sapphire substrates. X-ray diffraction, the residual resistivity, and transmission electron microscopy indicate that the Co/Pt films are highly ordered on the atomic scale. The coercive field and the perpendicular magnetic anisotropy increase as the substrate temperature is increased from 100–250 °C during deposition of the Co/Pt. Measurement of the domain wall creep velocity as a function of applied magnetic field yields the domain wall pinning energy, which scales with the coercive field. Evidence for an enhanced creep velocity in highly ordered epitaxial Co/Pt is found.

36 MATERIALS SCIENCE↗

Rapid Nb 3 Sn film growth by sputtering Nb on hot bronze

Nb deposited by magnetron sputtering onto hot Cu-15 wt.%Sn bronze substrates at temperatures above 700 °C achieved Nb 3 Sn film growth at a rate of 33 nm min -1 , which was an order of magnitude faster than that achieved for deposition of Nb on bronze at low temperature followed by in situ post reaction at the same high temperatures. Tin content in the Nb 3 Sn films made on hot bronze was ~26.3%, which is significantly higher than ~24.5% obtained by post-reaction as well as for typical bulk reactions between Nb and α -bronze. The Nb 3 Sn lattice parameter was consistent with measured tin content and predicted elastic strain for both routes. Critical temperatures of 14 K–16 K, instead of 18 K, were consistent with elastic strain due to coefficient of thermal expansion mismatch between the Nb 3 Sn and bronze substrate and, for the hot-bronze samples, stress related to the growth mechanism. Films were fully coalesced and had surface roughness values <20 nm over a 100 μ m 2 scan. Grain structure of the Nb 3 Sn films produced by Nb sputtering on hot bronze resembles zone 2 in the Thornton structure-zone diagram, in contrast to the equiaxed grain structure reminiscent of microstructure observed in reacted Nb 3 Sn wires exhibited by the post-reaction route.

Physics↗

In-situ sputtering of YBCO films for microwave applications

RF magnetron sputtering from a single YBCO target onto a heated substrate (700 C) was used to obtain c-axis-oriented 1-2-3 films that are superconducting without a subsequent annealing or oxygenation step, with Tc(R = 0) as high as 88 K on MgO and LaAlO3 substrates. This process uses an 8-in-diameter target in the sputter-up configuration, with a central grounded shield to eliminate negative ion bombardment. It can reproducibly and uniformly cover substrates as large as 3-in across at rates exceeding 1 A/s. Maintaining film composition very close to stoichiometry is essential for obtaining films with good superconducting properties and surface morphology. Optimum films have critical currents of 1 MA/sq cm at 77 K. Measurements of microwave surface resistance based on a stripline resonator indicate low surface resistance for unpatterned YBCO ground planes, but excess loss and a strong power dependence in a patterned center strip.

Ballentine, P. H.↗

Thermochromic VO{sub 2} nanorods made by sputter deposition: Growth conditions and optical modeling

Reactive dc magnetron sputtering onto glass-based substrates yielded deposits of thermochromic VO{sub 2} with well-developed nanorods and nanowires. Their formation was promoted by high substrate temperature (above {approx}500 Degree-Sign C), sufficient film thickness, proper inlet of the reactive gas, dispersed gold 'seeds,' and pronounced substrate roughness. Rutherford back scattering ascertained mass thicknesses, scanning electron microscopy depicted the nanostructures, and glancing incidence X-ray diffraction proved that single-phase VO{sub 2} was normally formed. Spectrophotometric measurements of total and diffuse transmittance and reflectance on VO{sub 2} thin films, at room temperature and {approx}100 Degree-Sign C, allowed us to determine complex dielectric functions below and above the 'critical' temperature for thermochromic switching ({approx}68 Degree-Sign C). These data were then used in computations based on the Bruggeman effective medium theory applied to randomly oriented prolate spheroidal structural units to derive the optical properties of the deposits. Experimental and computed data on spectral absorptance were found to be in good qualitative agreement.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Correlation of chemical composition and electrical properties of rf sputtered alumina films

Alumina films were prepared by radio frequency magnetron sputtering from an aluminum oxide target on an indium tin oxide covered glass. The purpose of the study was to test the influence of the sputter parameters on the elemental composition, surface morphology, and electrical insulation properties (breakdown fields and leakage currents). Tested parameters were the sputter gas (Ar) pressure, the sputter rate, the sputter power, the sputter gas composition (Ar:O{sub 2}), the conditioning of the target, the residual base pressure, and the substrate temperature. The surface morphology of the films was investigated by atomic force microscopy. Depth profiles of the elemental compositions were measured by elastic recoil detection using energetic heavy ions, and the insulation properties were investigated by current voltage measurements and impedance spectroscopy. The main finding is that the leakage currents increase by about five orders of magnitude, if the atomic ratio of O:Al increases from 1.35 to 2.0. In parallel the breakdown fields decrease by a factor of 100, and the character of the breakdowns changes from soft to hard. The highest breakdown fields (2.4 MV/cm) and smallest leakage currents (6.5x10{sup -8} A/cm{sup 2} at 2.0 MV/cm) are obtained for slightly Al rich films with small atomic concentrations of H (<0.5 at. %). These films were sputtered in pure Ar and under the lowest possible pressure of the residual gas.

36 MATERIALS SCIENCE↗

Preparation of ultrathin sputtered gold films on palladium as efficient oxygen reduction electro-catalysts

Herein, we present the preparation of ultrathin gold (Au) films on different M (M = Pd, Pt, Rh, Ir, and Ru) electrodes (Au/M) using magnetron sputtering deposition for oxygen reduction reaction (ORR). The ORR electro-catalytic activities of prepared Au/M catalysts increase as follows: Au/Ru < Au/Ir < Au/Rh < Au/Pt < Au/Pd. Accordingly, the oxygen reduction catalytic behaviors of the Au-modified palladium (Au/Pd) thin films with various Au thicknesses (0.16, 0.24, 0.5, and 1 nm) are investigated in acidic environments. It is found that Au modifications can promote oxygen reduction performances due to the development of more catalytic active sites on the Pd catalyst through the existence of Au atoms. Noticeably, Au/Pd samples exhibit a connection in oxygen reduction ability as a function of Au thickness, with the ultrathin 0.16 nm Au/Pd being the most active ORR catalyst. Significantly, the 0.16 nm Au/Pd material demonstrates superior stability after 1000 potential cycles compared with the 0.16 nm Pt/Pd owing to the influence of Au coating and structurally stable surfaces. Therefore, surface modification with the deposition of Au films on Pd represents a favorable technique to boost both the ORR capability and stability of the electro-catalysts.

Magnetron sputtering↗