Search NASA⌕ Search

SEARCH · Search NASA

Results for “Maximum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Complex Structural Disorder in a Polar Orthorhombic Perovskite Observed through the Maximum Entropy Method/Rietveld Technique

Ambient pressure stable perovskite oxides with all Bi3+ on the A-site are rare, with only four examples known. Due to the lone pair on Bi 3+ , these materials are seen as the best alternative to Pb-based piezoelectrics, which are used widely in society. The industry standard piezoelectric, Pb (Zr 1 – x Ti x )O 3 , relies on the [001] polarization of PbTiO 3 , but there are currently no ambient pressure stable Bi-based perovskites with this polarization vector, preventing the creation of an analogous system. We present the full structural analysis of the orthorhombic phase of (1 – x)Bi (Ti 3/8 Fe 2/8 Mg 3/8 )O 3 – x CaTiO 3 , which crystallizes in Pna2 1 symmetry with [001] polarization. This symmetry is rare and has only been reported twice for perovskites at ambient conditions. Analysis of maximum entropy method (MEM) models using synchrotron radiation powder X-ray diffraction reveals a disordered A-site configuration, and the MEM/Rietveld technique generates a structural model of this extreme disorder. Combined Rietveld analysis of X-ray and neutron diffraction data yields an accurate description of the local A-site configuration, which we use to understand our dielectric, ferroelectric, and piezoelectric measurements. These results give insight into how to stabilize this unique symmetry and inspire new design principles for Bi-based piezoelectrics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photon Counting Data Analysis: Application of the Maximum Likelihood and Related Methods for the Determination of Lifetimes in Mixtures of Rose Bengal and Rhodamine B

It is often convenient to know the minimum amount of data needed in order to obtain a result of desired accuracy and precision. It is a necessity in the case of subdiffraction-limited microscopies, such as stimulated emission depletion (STED) microscopy, owing to the limited sample volumes and the extreme sensitivity of the samples to photobleaching and photodamage. We present a detailed comparison of probability-based techniques (the maximum likelihood method and methods based on the binomial and the Poisson distributions) with residual minimization-based techniques for retrieving the fluorescence decay parameters for various two-fluorophore mixtures, as a function of the total number of photon counts, in time-correlated, single-photon counting experiments. The probability-based techniques proved to be the most robust (insensitive to initial values) in retrieving the target parameters and, in fact, performed equivalently to 2-3 significant figures. This is to be expected, as we demonstrate that the three methods are fundamentally related. Furthermore, methods based on the Poisson and binomial distributions have the desirable feature of providing a bin-by-bin analysis of a single fluorescence decay trace, which thus permits statistics to be acquired using only the one trace for not only the mean and median values of the fluorescence decay parameters but also for the associated standard deviations. Lastly, these probability-based methods lend themselves well to the analysis of the sparse data sets that are encountered in subdiffraction-limited microscopies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Maximum Entropy Theory of Multiscale Coarse-Graining via Matching Thermodynamic Forces: Application to a Molecular Crystal (TATB)

The MSCG/FM (multiscale coarse-graining via force-matching) approach is an efficient supervised machine learning method to develop microscopically informed coarse-grained (CG) models. Here we present a theory based on the principle of maximum entropy (PME) enveloping the existing MSCG/FM approaches. This theory views the MSCG/FM method as a special case of matching the thermodynamic forces from the extended ensemble described by the set of thermodynamic (relevant) system coordinates. This set may include CG coordinates, the stress tensor, applied external fields, and so forth, and may be characterized by nonequilibrium conditions. Following the presentation of the theory, we discuss the consistent matching of both bonded and nonbonded interactions. The proposed PME formulation is used as a starting point to extend the MSCG/FM method to the constant strain ensemble, which together with the explicit matching of the bonded forces is better suited for coarse-graining anisotropic media at a submolecular resolution. The theory is demonstrated by performing the fine coarse-graining of crystalline 1,3,5-triamino-2,4,6-trinitrobenzene (TATB), a well-known insensitive molecular energetic material, which exhibits highly anisotropic mechanical properties.

1,3,5-triamino-2,4,6-trinitrobenzene↗

Equipartition and the Temperature of Maximum Density of TIP4P/2005 Water

Here, we simulate TIP4P/2005 water in the temperature range of 257 to 318 K with time-steps δ = 0.25, 0.50, 1.00, 2.00, and 4.00 fs. The density–temperature behavior obtained using 0.25 or 0.50 fs is in excellent agreement with each other but differs from those obtained using time steps that have been shown earlier to lead to a breakdown of equipartition. For δt = 0.25 or 0.50 fs, the temperature of maximum density (TMD) is 277.15 K and the density value is in close agreement with experiments. For δt = 1.00 fs, the TMD is 277.15 K, but the density value is shifted higher. For the other time steps considered here, the TMD is shifted to progressively lower values for longer time steps, a trend that holds for different thermostat/barostat combinations. Enhancing the water–water dispersion interaction, as has been recommended for simulating disordered proteins in TIP4P/2005, degrades the description of the liquid–vapor phase envelope. We present a simple physically transparent explanation that highlights the separation of the time scales between translational and rotational motion. We also develop a metric, χ, that we term the equipartition anomaly, to detect equipartition violations in simulations that include molecules that are treated as rigid objects. Calculating χ is shown to be straightforward and sensitive to equipartition violations. A key takeaway from this study is that using sufficiently short time steps (≤0.5 fs) to preserve equipartition is essential for obtaining meaningful liquid water properties and for producing reliable simulation data, as correct ensemble sampling is fundamental to ensure reproducibility across codes and simulation algorithms.

Asthagiri, Dilipkumar N. [Oak Ridge National Labor↗

What is the best method to fit time-resolved data? A comparison of the residual minimization and the maximum likelihood techniques as applied to experimental time-correlated, single-photon counting data

The need for measuring fluorescence lifetimes of species in subdiffraction-limited volumes in, for example, stimulated emission depletion (STED) microscopy, entails the dual challenge of probing a small number of fluorophores and fitting the concomitant sparse data set to the appropriate excited-state decay function. This need has stimulated a further investigation into the relative merits of two fitting techniques commonly referred to as “residual minimization” (RM) and “maximum likelihood” (ML). Fluorescence decays of the well-characterized standard, rose bengal in methanol at room temperature (530 ± 10 ps), were acquired in a set of five experiments in which the total number of “photon counts” was approximately 20, 200, 1000, 3000, and 6000 and there were about 2–200 counts at the maxima of the respective decays. Each set of experiments was repeated 50 times to generate the appropriate statistics. Each of the 250 data sets was analyzed by ML and two different RM methods (differing in the weighting of residuals) using in-house routines and compared with a frequently used commercial RM routine. Convolution with a real instrument response function was always included in the fitting. While RM using Pearson’s weighting of residuals can recover the correct mean result with a total number of counts of 1000 or more, ML distinguishes itself by yielding, in all cases, the same mean lifetime within 2% of the accepted value. For 200 total counts and greater, ML always provides a standard deviation of <10% of the mean lifetime, and even at 20 total counts there is only 20% error in the mean lifetime. Here, the robustness of ML advocates its use for sparse data sets such as those acquired in some subdiffraction-limited microscopies, such as STED, and, more importantly, provides greater motivation for exploiting the time-resolved capacities of this technique to acquire and analyze fluorescence lifetime data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the Surprising Ionic Conductivity Maximum in Zn(TFSI) 2 Water/Acetonitrile Mixture Electrolytes

Aqueous electrolytes composed of 0.1 M zinc bis-(trifluoromethyl-sulfonyl)-imide (Zn-(TFSI) 2 ) and acetonitrile (ACN) were studied using combined experimental and simulation techniques. The electrolyte was found to be electrochemically stable when the ACN V% is higher than 74.4. In addition, it was found that the ionic conductivity of the mixed solvent electrolytes changes as a function of ACN composition, and a maximum was observed at 91.7 V% of ACN although the salt concentration is the same. This behavior was qualitatively reproduced by molecular dynamics (MD) simulations. Detailed analyses based on experiments and MD simulations show that at high ACN composition the water network existing in the high water composition solutions breaks. As a result, the screening effect of the solvent weakens and the correlation among ions increases, which causes a decrease in ionic conductivity at high ACN V%. Furthermore, this study provides a fundamental understanding of this complex mixed solvent electrolyte system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anderson Localization of Thermal Phonons Leads to a Thermal Conductivity Maximum

Our elastic model of ErAs disordered GaAs/AlAs superlattices exhibits a local thermal conductivity maximum as a function of length due to exponentially suppressed Anderson-localized phonons. By analyzing the sample-to-sample fluctuations in the dimensionless conductance, g, the transition from diffusive to localized transport is identified as the crossover from the multichannel to single-channel transport regime g ≈ 1. Single parameter scaling is shown to hold in this crossover regime through the universality of the probability distribution of g that is independent of system size and disorder strength.

42 ENGINEERING↗

Rational Design of Lithium–Sulfur Battery Cathodes Based on Experimentally Determined Maximum Active Material Thickness

Rational design of conductive carbon hosts for high energy density lithium-sulfur batteries requires an understanding of the fundamental limitations to insulating active material loading. In this work, we investigate the electrochemistry of lithium sulfide films ranging in thickness from 30 to 3500 nm. We show that films thicker than approximately 40 nm cannot be charged at local charge densities above 1 μA cm -2 , and by implication, the maximum useful pore diameter is near 60 nm in a practical cathode. ‘Activation’ overpotentials for Li 2 S are identified in thicker films, resulting from polysulfide generation, but are shown not to improve the fundamental areal charge limitations. Here, we develop a model for filling of conductive pores with active material to rationally design composites based on local charge density. For low-electrolyte applications, the importance of matching micropore volume to sulfide loading and cycling rate is emphasized.

25 ENERGY STORAGE↗

Estimation of Evapotranspiration of Amazon Rainforest Using the Maximum Entropy Production Method

Energy budget of Amazonian forests has a large influence on regional and global climate, but relevant data are scarce. A novel energy partition method based on the maximum entropy production (MEP) theory is applied to simulate evapotranspiration in Amazonia. Using site-level eddy flux data, the MEP method shows high skill at the hourly, daily, and monthly scales. Consistent performance under different levels of land surface dryness is revealed, hinting that drought signal is appropriately resolved. The site-level MEP-based estimates outperform the estimates of the Moderate Resolution Imaging Spectroradiometer evapotranspiration product, which is commonly used for large-scale assessments. At the Amazon basin scale, the two series yield similar averages but exhibit spatial differences. The parameter parsimony and demonstrated skill of the MEP method make it an attractive approach for environments with diverse strategies of water flux control.

54 ENVIRONMENTAL SCIENCES↗

The Evolving Distribution of Relative Humidity Conditional Upon Daily Maximum Temperature in a Warming Climate

Abstract The impacts of heat waves in a warming climate depend not only on changing temperatures but also on changing humidity. Using 35 simulations from the Community Earth System Model Large Ensemble (CESM LENS), we investigate the long‐term evolution of the joint distribution of summer relative humidity (RH) and daily maximum temperature ( Tmax ) near four U.S. cities (New York City, Chicago, Phoenix, and New Orleans) under the high‐emissions Representative Concentration Pathway (RCP) 8.5. We estimate the conditional quantiles of RH given Tmax with quantile regression models, using functions of temperature for each city in July for three time periods (1990–2005, 2026–2035, and 2071–2080). Quality‐of‐fit diagnostics indicate that these models accurately estimate conditional quantiles for each city. As expected, each quantile of Tmax increases from 1990–2005 to 2071–2080, while mean RH decreases modestly. Conditional upon a fixed quantile of Tmax , the median and high quantiles of RH decrease, while those of the Heat Index (HI) and dew point both increase. This result suggests that, despite a modest decrease in median relative humidity, heat stress measured by metrics considering both humidity and temperature in a warming climate will increase faster than that measured by temperatures alone would indicate. For a fixed Tmax , the high quantiles of RH (and thus of HI and dew point) increase from 1990–2005 to 2071–2080 in all four cities. This result suggests that the heat stress of a day at a given Tmax will increase in a warming climate due to the increase of RH.

Yuan, Jiacan↗

Bayesian Poroelastic Aquifer Characterization From InSAR Surface Deformation Data. Part I: Maximum A Posteriori Estimate

Characterizing the properties of groundwater aquifers is essential for predicting aquifer response and managing groundwater resources. In this work, we develop a high-dimensional scalable Bayesian inversion framework governed by a three-dimensional quasi-static linear poroelastic model to characterize lateral permeability variations in groundwater aquifers. In this work, we determine the maximum a posteriori (MAP) point of the posterior permeability distribution from centimeter-level surface deformation measurements obtained from Interferometric Synthetic Aperture Radar (InSAR). The scalability of our method to high parameter dimension is achieved through the use of adjoint-based derivatives, inexact Newton methods to determine the MAP point, and a Mat´ern class sparse prior precision operator. Together, these guarantee that the MAP point is found at a cost, measured in number of forward/adjoint poroelasticity solves, that is independent of the parameter dimension. We apply our methodology to a test case for a municipal well in Mesquite, Nevada, in which InSAR and GPS surface deformation data are available. We solve problems with up to 320,824 state variable degrees of freedom (DOFs) and 16,896 parameter DOFs. A consistent treatment of noise level is employed so that the aquifer characterization result does not depend on the pixel spacing of surface deformation data. Our results show that the use of InSAR data significantly improves characterization of lateral aquifer heterogeneity, and the InSAR-based aquifer characterization recovers complex lateral displacement trends observed by independent daily GPS measurements.

54 ENVIRONMENTAL SCIENCES↗

Isopycnal Submesoscale Stirring Crucially Sustaining Subsurface Chlorophyll Maximum in Ocean Cyclonic Eddies

Abstract Mesoscale and submesoscale processes have crucial impacts on ocean biogeochemistry, importantly enhancing the primary production in nutrient‐deficient ocean regions. Yet, the intricate biophysical interplay still holds mysteries. Using targeted high‐resolution in situ observations in the South China Sea, we reveal that isopycnal submesoscale stirring serves as the primary driver of vertical nutrient transport to sustain the dome‐shaped subsurface chlorophyll maximum (SCM) within a long‐lived cyclonic mesoscale eddy. Density surface doming at the eddy core increased light exposure for phytoplankton production, while along‐isopycnal submesoscale stirring disrupted the mesoscale coherence and drove significant vertical exchange of tracers. These physical processes play a crucial role in maintaining the elevated phytoplankton biomass in the eddy core. Our findings shed light on the universal mechanism of how mesoscale and submesoscale coupling enhances primary production in ocean cyclonic eddies, highlighting the pivotal role of submesoscale stirring in structuring marine ecosystems.

Cao, Haijin↗

North‐East Peri‐Tethyan Water Column Deoxygenation and Euxinia at the Paleocene Eocene Thermal Maximum

Abstract The Paleocene–Eocene Thermal Maximum (PETM) is associated with climatic change and biological turnover. It shares features with the Oceanic Anoxic Events (OAEs) of the Mesozoic, such as transient global warming and biogeochemical perturbations. However, the PETM experienced a more muted expansion of marine anoxia compared to the Mesozoic OAEs (especially OAE2), with geographically limited evidence for photic zone euxinia (PZE). We explore the extent and drivers of marine deoxygenation during the PETM using biomarkers for water column euxinia and anoxia as well as an intermediate complexity Earth system model (cGEnIE). These reveal that the water column in the North‐East Peri‐Tethys became anoxic, with euxinic conditions reaching the photic zone (PZE) during the PETM. Our model shows that euxinia developed due to a global increase in the ocean nutrient inventory with concomitant oxygen consumption, similar to findings for OAE2. The particularly strong regional response in the NE Peri‐Tethys appears to arise from a combination of global CO 2 ‐weathering forcing, regionally restricted circulation and upwelling of sulphidic thermocline waters. Unlike OAE2, anoxia and PZE do not become widespread in our PETM simulations, consistent with new and existing geochemical and biological proxy data. This globally muted response could result from reduced biogeochemical feedbacks to climate forcing relative to the mid‐Cretaceous climate. Our observations suggest that similar mechanisms operated in response to disparate Cenozoic (PETM) and Mesozoic (OAEs) transient global warming events, while also highlighting that background conditions are crucial in modulating the sensitivity of Earth's system to them.

Behrooz, L.↗

Global Ocean Cooling of 2.3°C During the Last Glacial Maximum

Abstract Quantitative constraints on past mean ocean temperature (MOT) critically inform our historical understanding of Earth's energy balance. A recently developed MOT proxy based on paleoatmospheric Xe, Kr, and N 2 ratios in ice core air bubbles is a promising tool rooted in the temperature dependences of gas solubilities. However, these inert gases are systematically undersaturated in the modern ocean interior, and it remains unclear how air‐sea disequilibrium may have changed in the past. Here, we carry out 30 tracer‐enabled model simulations under varying circulation, sea ice cover, and wind stress regimes to evaluate air‐sea disequilibrium in the Last Glacial Maximum (LGM) ocean. We find that undersaturation of all three gases was likely reduced, primarily due to strengthened high‐latitude winds, biasing reconstructed MOT by −0.38 ± 0.37°C (1σ). Accounting for air‐sea disequilibrium, paleoatmospheric inert gases indicate that LGM MOT was 2.27 ± 0.46°C (1σ) colder than the pre‐industrial era.

Seltzer, A. M.↗

An investigation of irreproducibility in maximum likelihood phylogenetic inference

Phylogenetic trees are essential for studying biology, but their reproducibility under identical parameter settings remains unexplored. Here, we find that 3515 (18.11%) IQ-TREE-inferred and 1813 (9.34%) RAxML-NG-inferred maximum likelihood (ML) gene trees are topologically irreproducible when executing two replicates (Run1 and Run2) for each of 19,414 gene alignments in 15 animal, plant, and fungal phylogenomic datasets. Notably, coalescent-based ASTRAL species phylogenies inferred from Run1 and Run2 sets of individual gene trees are topologically irreproducible for 9/15 phylogenomic datasets, whereas concatenation-based phylogenies inferred twice from the same supermatrix are reproducible. Our simulations further show that irreproducible phylogenies are more likely to be incorrect than reproducible phylogenies. These results suggest that a considerable fraction of single-gene ML trees may be irreproducible. Increasing reproducibility in ML inference will benefit from providing analyses’ log files, which contain typically reported parameters (e.g., program, substitution model, number of tree searches) but also typically unreported ones (e.g., random starting seed number, number of threads, processor type).

59 BASIC BIOLOGICAL SCIENCES↗

Quantum circuit cutting with maximum-likelihood tomography

Abstract We introduce maximum-likelihood fragment tomography (MLFT) as an improved circuit cutting technique for running clustered quantum circuits on quantum devices with a limited number of qubits. In addition to minimizing the classical computing overhead of circuit cutting methods, MLFT finds the most likely probability distribution for the output of a quantum circuit, given the measurement data obtained from the circuit’s fragments. We demonstrate the benefits of MLFT for accurately estimating the output of a fragmented quantum circuit with numerical experiments on random unitary circuits. Finally, we show that circuit cutting can estimate the output of a clustered circuit with higher fidelity than full circuit execution, thereby motivating the use of circuit cutting as a standard tool for running clustered circuits on quantum hardware.

97 MATHEMATICS AND COMPUTING↗

Hurricane-Induced Rainfall is a Stronger Predictor of Tropical Forest Damage in Puerto Rico Than Maximum Wind Speeds

Projected increases in cyclonic storm intensity under a warming climate will have profound effects on forests, potentially changing these ecosystems from carbon sinks to sources. Forecasting storm impacts on these ecosystems requires consideration of risk factors associated with storm meteorology, landscape structure, and forest attributes. Here we evaluate risk factors associated with damage severity caused by Hurricanes María and Irma across Puerto Rican forests. Using field and remote sensing data, total forest aboveground biomass (AGB) lost to the storms was estimated at 10.44 (±2.33) Tg, ca. 23% of island-wide pre-hurricane forest AGB. Storm-related rainfall was a stronger predictor of forest damage than maximum wind speeds. Soil water storage capacity was also an important risk factor, corroborating the influence of rainfall on forest damage. Expected increases of 20% in hurricane-associated rainfall in the North Atlantic highlight the need to consider how such shifts, together with high speed winds, will affect terrestrial ecosystems.

54 ENVIRONMENTAL SCIENCES↗

A 3D approximate maximum likelihood solver for localization of fish implanted with acoustic transmitters

Better understanding of fish behavior is vital for recovery of many endangered species including salmon. The Juvenile Salmon Acoustic Telemetry System (JSATS) was developed to observe the out-migratory behavior of juvenile salmonids tagged by surgical implantation of acoustic micro-transmitters and to estimate the survival when passing through dams on the Snake and Columbia Rivers. A robust three-dimensional solver was needed to accurately and efficiently estimate the time sequence of locations of fish tagged with JSATS acoustic transmitters, to describe in sufficient detail the information needed to assess the function of dam-passage design alternatives. An approximate maximum likelihood solver was developed using measurements of time difference of arrival from all hydrophones in receiving arrays on which a transmission was detected. Field experiments demonstrated that the developed solver performed significantly better in tracking efficiency and accuracy than other solvers described in the literature.

60 APPLIED LIFE SCIENCES↗