Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model comparison”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

LDEF data: Comparisons with existing models

The relationship between the observed cratering impact damage on the Long Duration Exposure Facility (LDEF) versus the existing models for both the natural environment of micrometeoroids and the man-made debris was investigated. Experimental data was provided by several LDEF Principal Investigators, Meteoroid and Debris Special Investigation Group (M&D SIG) members, and by the Kennedy Space Center Analysis Team (KSC A-Team) members. These data were collected from various aluminum materials around the LDEF satellite. A PC (personal computer) computer program, SPENV, was written which incorporates the existing models of the Low Earth Orbit (LEO) environment. This program calculates the expected number of impacts per unit area as functions of altitude, orbital inclination, time in orbit, and direction of the spacecraft surface relative to the velocity vector, for both micrometeoroids and man-made debris. Since both particle models are couched in terms of impact fluxes versus impactor particle size, and much of the LDEF data is in the form of crater production rates, scaling laws have been used to relate the two. Also many hydrodynamic impact computer simulations were conducted, using CTH, of various impact events, that identified certain modes of response, including simple metallic target cratering, perforations and delamination effects of coatings.

Coombs, Cassandra R.↗
NASA NTRS1993

Discussion of 'Comparison of turbulence models for the natural convection boundary layer along a heated vertical plate'

The paper presents a critical comment on the work of Henkes and Hoogendoorn. In particular, it is argued that the model of To and Humphrey (TH) (1986) has been implemented incorrectly, rendering invalid the conclusion that the TH model considerably deviates from the other models evaluated. In their response to the criticism, the authors present arguments in support of the correctness of their implementation of the TH model and of the validity of the conclusions reached in their work.

Humphrey, Joseph A. C.↗
NASA NTRS1993

Comparison of kinetic models for atom recombination on high-temperature reusable surface insulation

Five kinetic models are compared for their ability to predict recombination coefficients for oxygen and nitrogen atoms over high-temperature reusable surface insulation (HRSI). Four of the models are derived using Rideal-Eley or Langmuir-Hinshelwood catalytic mechanisms to describe the reaction sequence. The fifth model is an empirical expression that offers certain features unattainable through mechanistic description. The results showed that a four-parameter model, with temperature as the only variable, works best with data currently available. The model describes recombination coefficients for oxygen and nitrogen atoms for temperatures from 300 to 1800 K. Kinetic models, with atom concentrations, demonstrate the influence of atom concentration on recombination coefficients. These models can be used for the prediction of heating rates due to catalytic recombination during re-entry or aerobraking maneuvers. The work further demonstrates a requirement for more recombination experiments in the temperature ranges of 300-1000 K, and 1500-1850 K, with deliberate concentration variation to verify model requirements.

Willey, Ronald J.↗
NASA NTRS1993

Comparison of Numerical Model Results with Diffusion Flames in Microgravity

The effects of gravity on methane diffusion flames were studied using a finite difference numerical model. Variables under consideration included velocity, pressure, temperature, enthalpy, reactive species, and inert carrier gas. Results obtained showed that flames in zero gravity were wider and taller than those in normal gravity. The use of a six reaction scheme produced similar predictions of flame width and height compared to those of the single reaction case. The numerical models predicted a considerable difference in the flame base region between normal gravity and low gravity. This region is considered to be beyond the boundaries of current analytical models.

Hyer, Paul V.↗
NASA NTRS1992

Comparison of micromechanical models for elastic properties

Results for the predicted effective elastic properties of unidirectional composites are presented for glass/epoxy and graphite/epoxy using eight different models. A brief review of each of the models is given along with the final equations in most cases. It is shown that there is wide variation in some predictions for glass/epoxy and that the upper and lower composite cylinder assemblage bounds do not always fall close together for this material.

Lissenden, Cliff J.↗
NASA NTRS1992

A comparison between backscattering models for rough surfaces

The ease of applicability of three scattering models is examined. This is accomplished by considering the time taken to numerically evaluate these models and by comparing their predictions as a function of surface roughness, frequency, incident angle and polarization with the moment-method solution in two dimensions. The complexity of the analytic models in three dimensions and their analytic reduction to high- and low-frequency regions are also compared. The selected models are an integral equation model (IEM), a full wave model (FWM), and the phase perturbation model (PPM). It is noted that in three dimensions, the full-wave model requires an evaluation of a tenfold integral and the phase perturbation model requires a fourfold and a twofold integral, whereas the integral equation model is an algebraic equation in like polarization under single scattering conditions. It is found that both the IEM and PPM agree with the moment-method solution from low to high frequencies numerically.

Chen, K. S.↗
NASA NTRS1993

A comprehensive comparison of turbulence models in the far wake

In the present study, the far wake was examined numerically using an implicit, upwind, finite-volume, compressible Navier-Stokes code. The numerical grid started at 500 equivalent circular cylinder diameters in the wave, and extended to 4000 equivalent diameters. By concentrating only on the far wake, the numerical difficulties and fine mesh requirements near the wake-generating body were eliminated. At the time of this writing, results for the K-epsilon and K-omega turbulence models at low Mach number have been completed and show excellent agreement with previous incompressible results and far-wake similarity solutions. The code is presently being used to compare the performance of various other turbulence models, including Reynolds stress models and the new anisotropic two-equation turbulence models being developed at NASA Langley. By increasing our physical understanding of the deficiencies and limits of these models, it is hoped that improvements to the universality of the models can be made. Future plans include examination of two-dimensional momentumless wakes as well.

Cimbala, John M.↗
NASA NTRS1993

Comparison of inversion models using AIRSAR data for Death Valley, California

Polarimetric Airborne Synthetic Aperture Radar (AIRSAR) data were collected for the Geologic Remote Sensing Field Experiment (GRSFE) over Death Valley, California, USA, in September 1989. AIRSAR is a four-look, quid-polarizaiton, three frequency instrument. It collects measurements at C-band (5.66 cm), L-band (23.98 cm), and P-band (68.13 cm), and has a GIFOV of 10 meters and a swath width of 12 kilometers. Because the radar measures at three wavelengths, different scales of surface roughness are measured. Also, dielectric constants can be calculated from the data. The scene used in this study is in Death Valley, California and is located over Trail Canyon alluvial fan, the valley floor, and Artists Drive alluvial fan. The fans are very different in mineralogic makeup, size, and surface roughness. Trail Canyon fan is located on the west side of the valley at the base of the Panamint Range and is a large fan with older areas of desert pavement and younger active channels. The source for the material on southern part of the fan is mostly quartzites and there is an area of carbonate source on the northern part of the fan. Artists Drive fan is located at the base of the Black Mountains on the east side of the valley and is a smaller, young fan with its source mostly from volcanic rocks. The valley floor contains playa and salt deposits that range from smooth to Devil's Golf course type salt pinnacles.

Kierein-Young, Kathryn S.↗
NASA NTRS1995

DE-1 observations of polar O(+) stream bulk parameters and comparison with a model of the centrifugally-accelerated polar wind

A survey of bulk parameters of analyzable O(+) outward streams in the mid-altitude (3-4.7 R(sub E) geocentric distance) polar cap magnetosphere is obtained from measurements by the Retarding Ion Mass Spectrometer (RIMS) aboard the Dynamics Explorer-1 (DE-1) spacecraft. There is wide scatter in the obtained densities, but they do display discernible trends: the average O(+) density in these streams decreases from about 60 ions/cc at 3.5 R(sub E) to about 1 ion/cc at 4.6 R(sub E). The streaming velocities are somewhat more defined, and their average increases from about 8 km/s at 3.5 R(sub E) to about 12 km/s at 4.6 R(sub E). The densities and bulk velocities are inversely correlated. We have further compared these observational trends with model profiles for the centrifugally-accelerated polar wind as recently described by Horwitz et al. (1994). The large outflow velocities observed can be understood in part as centrifugally-driven by convection with ionospheric electric field magnitudes of the order 50-70 mV/m, perhaps including plasma expansion effects.

Ho, C. Wing↗
NASA NTRS1994

A comparison of turbulence models in computing multi-element airfoil flows

Four different turbulence models are used to compute the flow over a three-element airfoil configuration. These models are the one-equation Baldwin-Barth model, the one-equation Spalart-Allmaras model, a two-equation k-omega model, and a new one-equation Durbin-Mansour model. The flow is computed using the INS2D two-dimensional incompressible Navier-Stokes solver. An overset Chimera grid approach is utilized. Grid resolution tests are presented, and manual solution-adaptation of the grid was performed. The performance of each of the models is evaluated for test cases involving different angles-of-attack, Reynolds numbers, and flap riggings. The resulting surface pressure coefficients, skin friction, velocity profiles, and lift, drag, and moment coefficients are compared with experimental data. The models produce very similar results in most cases. Excellent agreement between computational and experimental surface pressures was observed, but only moderately good agreement was seen in the velocity profile data. In general, the difference between the predictions of the different models was less than the difference between the computational and experimental data.

Rogers, Stuart E.↗
NASA NTRS1994

On the X-ray spectrum of Kepler's supernova remnant

We have devised a method to do nonequilibrium ionization calculations on the results of two-dimensional hydrodynamical simulations, based on the algorithm of Hughes & Helfand (1985). We have calculated the ionization structure and X-ray emission for a two-dimensional numerical hydrodynamical simulation for the remnant of Kepler's supernova (SN); the hydrodynamical model was presented in a previous paper. In this model, the progenitor of Kepler's SN is assumed to have been a massive runaway star ejected from the Galactic plane. In its red supergiant stage, its dense stellar wind was distorted and compressed into a bow shock by the ram pressure of the tenuous interstellar medium. The subsequent interaction of the supernova ejecta with this asymmetric circumstellar matter produced a strongly asymmetric supernova remnant (SNR). In this paper, we present calculated X-ray spectra for this hydrodynamical model. A comparison with observations implies a moderate overabundance of Fe in Kepler's SNR (only 50% larger than its cosmic value), in contrast to a large (6 to 15) Fe overabundance derived previously. However, we confirm earlier conclusions that Si and S abundances are 2 to 3 times solar. These modest enhancements of Si, S, and Fe may be attributed either to heavy-element enriched SN ejecta or to the initial chemical abundances of the SN progenitor, which originated in the metal-rich inner Galaxy. The comparison of our models with the observed spectra confirm theoretical predictions that moderate electron heating occurs at strong collisionless shock fronts, with the implied electron/mean temperature ratio of approximately 0.5.

Borkowski, Kazimierz J.↗
NASA NTRS1994

The kinematics of dense clusters of galaxies. 3: Comparison with cosmological models

We compare the combined distribution of 31 group and 25 cluster velocity dispersions with the ensemble of 32 models for the formation and evolution of large-scale structure examined by Weinberg & Cole (1992). The models include Gaussian and non-Gaussian initial fluctuations, different power law spectra (n = -1, n = 0, n = -2, 'pancake'), flat (Omega = 1) and open (Omega = 0.2) cosmologies, and unbiased (b(sub 8) = 1) and biased (b(sub 8) = 2) galaxy formation. The set of initial conditions we test, although limited, samples enough parameter space to indicate which general classes of models are consistent with the data. The two Gaussian, n = -1 models which best approximate the standard and open Cold Dark Matter (CDM) models do not match the observed distribution of velocity dispersions; models with b(sub 8) = 2 and Omega = 1 ('standard') or b(sub 8) = 1 and Omega = 0.2 ('open') predict too large a ratio of low to high velocity dispersion systems. A 'COBE-normalized' CDM model with b(sub 8) = 1 and Omega = 1 produces clusters with velocity dispersions higher than those measured. All three models overestimate the total abundance of systems.

Zabludoff, Ann I.↗
NASA NTRS1994

DE1 observations of polar O(+) stream bulk parameters and comparison with a model of the centrifugally-accelerated polar wind

A survey of bulk parameters of analyzable O(+) outward streams in the midaltitude (3-4.7 R(sub E) geocentric distance) polar cap magnetosphere is obtained from measurments by the Retarding Ion Mass Spectrometer (RIMS) aboard the Dynamics Explorer 1 (DE1) spacecraft. There is wide scatter in the obtained densities, but they do display discernible trends: the average O(+) density in these decreases from about 30 ions/cu cm at 3.5 R(sub E) to about 1 ion/cu cm at 4.6 R(sub E). The streaming velocities are somewhat more defined, and their average increases from about 8 km/s at 3.5 R(sub E) to about 12 km/s at 4 R(sub E). The outward ion flux increases by a factor of 4 with magnetic activity from K(sub p) = 2 to 5. We have further compared these observational trends with model profiles for the centrifugally-accelerated polar wind as recently described by Horwitz et al. (1994). The large outflow velocities observed can be understood in part as centrifugally-driven by convection with ionospheric electric field magnitudes of the order 50-70 mV/m, purhaps including plasma expansion effects.

Wing Ho, C.↗
NASA NTRS1995

High temperature superconductors applications in telecommunications

The purpose of this paper is twofold: (1) to discuss high temperature superconductors with specific reference to their employment in telecommunications applications; and (2) to discuss a few of the limitations of the normally employed two-fluid model. While the debate on the actual usage of high temperature superconductors in the design of electronic and telecommunications devices - obvious advantages versus practical difficulties - needs to be settled in the near future, it is of great interest to investigate the parameters and the assumptions that will be employed in such designs. This paper deals with the issue of providing the microwave design engineer with performance data for such superconducting waveguides. The values of conductivity and surface resistance, which are the primary determining factors of a waveguide performance, are computed based on the two-fluid model. A comparison between two models - a theoretical one in terms of microscopic parameters (termed Model A) and an experimental fit in terms of macroscopic parameters (termed Model B) - shows the limitations and the resulting ambiguities of the two-fluid model at high frequencies and at temperatures close to the transition temperature. The validity of the two-fluid model is then discussed. Our preliminary results show that the electrical transport description in the normal and superconducting phases as they are formulated in the two-fluid model needs to be modified to incorporate the new and special features of high temperature superconductors. Parameters describing the waveguide performance - conductivity, surface resistance and attenuation constant - will be computed. Potential applications in communications networks and large scale integrated circuits will be discussed. Some of the ongoing work will be reported. In particular, a brief proposal is made to investigate of the effects of electromagnetic interference and the concomitant notion of electromagnetic compatibility (EMI/EMC) of high T(sub c) superconductors.

Kumar, A. Anil↗
NASA NTRS1996

Comparison of Turbulence Models for Nozzle-Afterbody Flows with Propulsive Jets

A numerical investigation was conducted to assess the accuracy of two turbulence models when computing non-axisymmetric nozzle-afterbody flows with propulsive jets. Navier-Stokes solutions were obtained for a Convergent-divergent non-axisymmetric nozzle-afterbody and its associated jet exhaust plume at free-stream Mach numbers of 0.600 and 0.938 at an angle of attack of 0 deg. The Reynolds number based on model length was approximately 20 x 10(exp 6). Turbulent dissipation was modeled by the algebraic Baldwin-Lomax turbulence model with the Degani-Schiff modification and by the standard Jones-Launder kappa-epsilon turbulence model. At flow conditions without strong shocks and with little or no separation, both turbulence models predicted the pressures on the surfaces of the nozzle very well. When strong shocks and massive separation existed, both turbulence models were unable to predict the flow accurately. Mixing of the jet exhaust plume and the external flow was underpredicted. The differences in drag coefficients for the two turbulence models illustrate that substantial development is still required for computing very complex flows before nozzle performance can be predicted accurately for all external flow conditions.

Compton, William B., III↗
NASA NTRS1998

Comparison of Computational, Model and Experimental, Example Trained Neural Networks for Processing Speckled Fringe Patterns

The responses of artificial neural networks to experimental and model-generated inputs are compared for detection of damage in twisted fan blades using electronic holography. The training-set inputs, for this work, are experimentally generated characteristic patterns of the vibrating blades. The outputs are damage-flag indicators or second derivatives of the sensitivity-vector-projected displacement vectors from a finite element model. Artificial neural networks have been trained in the past with computational-model- generated training sets. This approach avoids the difficult inverse calculations traditionally used to compare interference fringes with the models. But the high modeling standards are hard to achieve, even with fan-blade finite-element models.

Decker, A. J.↗
NASA NTRS1998

Comparison of Contamination Model Predictions to LDEF Surface Measurements

Contaminant deposition measurements have been made on species content and depth profiles on three experiments trays from the Long Duration Exposure Facility (LDEF), Auger, Argon sputtering, Electron Spectroscopy for Chemical Analysis (ESCA) and Scanning Electron Microscopy (SEM) analysis. The integrated spacecraft environment model (ISEM) was used to predict the deposition levels of the contaminants measured on the three trays. The details of the modeling and assumptions used are presented along with the predictions for the deposition on select surfaces on the trays. These are compared to the measured results. The trays represent surfaces that have a high atomic oxygen flux, and intermediate oxygen flux, and no oxygen flux. All surfaces received significant solar Ultraviolet flux. It appears that the atomic oxygen was the primary agent that caused significant deposition to occur. Surfaces that saw significant contaminant flux solar UV and no atomic oxygen did not show any appreciable levels of observable deposition. The implications of the atom ic oxygen interaction with contaminant deposits containing silicon contaminant sources is discussed. The primary contaminant sources are DC61104 adhesive and Z306 paint. The results and interpretation of the findings have a potential significant impact on spacecraft surfaces that are exposed to solar UV and atomic oxygen in low Earth orbit.

Gordon, Tim↗