Search NASA⌕ Search

SEARCH · Search NASA

Results for “Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Development of a multiphase PIC model for slurry flow modeling

MFIX-Exa is a recently released multiphase CFD code originally developed for the simulation of particle-laden gas-solid flows. Due to its high-performance computing capabilities, MFIX-Exa is an ideal candidate for scale-up studies of slurry reactors, specifically the coarse-grained particle-in-cell (PIC) model with its statistical treatment of the particle phase. Unfortunately, several physical models that were neglected during original development because they are not relevant for high-density ratio gas-solid flows are important in slurry flows where the particle-to-fluid density ratio is near unity. In this preliminary work we focus on the effective (suspension) viscosity. The models of Brinkman (1952), Krieger and Dougherty (1956), and Cheng and Law (2003) are considered. The impact of the effective viscosity model is studied on horizontal pipe flow. The experimental data of Gillies et al. (2002) is used to assess the pressure drop predictions.

Fullmer, William D.↗
DOE OSTI2024

CI-MOR Final Report: Analysis and Validation of Critical Infrastructure Models using Model Order Reduction

This report summarizes the research and capabilities developed as part of the project “Analysis and Validation of Critical Infrastructure Models using Model Order Reduction” (CI-MOR) LDRD project. CI-MOR research enables the solution of large, complex optimization models that naturally arise in national security challenges involving critical infrastructures. Specifically, CI-MOR researchers developed methods to (1) rigorously approximate complex, nonlinear optimization formulations, (2) identify alternative near-optimal solutions, (3) accelerate optimization workflows used for complex applications, and (4) rigorously integrate domain knowledge in stochastic-process models. This report provides an overview of the research done in CI-MOR, and we describe application exemplars used to illustrate CI-MOR capabilities. Furthermore, we describe the software developed by CI-MOR that researchers can leverage to analyze new applications.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Model-form Error Correction using Universal Differential Equations for an Agent-Based Model of Infectious Disease

This report demonstrates universal differential equations (UDEs) as an approach to bridge the gap between ordinary differential equations (ODE) models and agent-based models (ABMs). Using UDE models as surrogates for ABMs allows us to preserve the foundational ODE that represents global disease dynamics while coupling it with a neural network model to approximate functions for the local behaviors of the ABM.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Modeling of Stress and Temperature Effects on Creep of Reduced Activation Ferritic-Martensitic Steel Alloy F82H (Tertiary Creep Modeling of RAFM Steel)

A Bayesian optimization procedure is presented for calibrating a multi-mechanism micromechanical model for creep to experimental data of F82H steel. Reduced activation ferritic martensitic (RAFM) steels based on are the most promising candidates for some fusion reactor structures. Although there are indications that RAFM steel could be viable for fusion applications at temperatures up to 600 °C, the maximum operating temperature will be determined by the creep properties of the structural material and the breeder material compatibility with the structural material. Due to the relative paucity of available creep data on F82H steel compared to other alloys such as Grade 91 steel, micromechanical models are sought for simulating creep based on relevant deformation mechanisms. As a point of departure, this work recalibrates a model form that was previously proposed for Grade 91 steel to match creep curves for F82H steel. Due to the large number of parameters (9) and cost of the nonlinear simulations, an automated approach for tuning the parameters is pursued using a recently developed Bayesian optimization for functional output (BOFO) framework [1]. Incorporating extensions such as batch sequencing and weighted experimental load cases into BOFO, a reasonably small error between experimental and simulated creep curves at two load levels is achieved in a reasonable number of iterations. Validation with an additional creep curve provides confidence in the fitted parameters obtained from the automated calibration procedure to describe the creep behavior of F82H steel at 600 °C. The model is further extended using a temperature dependent scaling law approach to simulate creep response between 550 °C and 650 °C. The efficacy of this extension is compared with the previously used scaling law approach for Grade 91 steel.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Improving Dose Modeling With Dynamic Modeling Tools [Slides]

Utilities aiming for higher fuel enrichment for power uprates or extended operation times before refueling must conduct a new dose analysis. Current conservative dose estimation standards may cause utilities to exceed regulatory limits for proposed increased fuel enrichment. A more accurate modeling of doses from reactor accidents can lower these conservative assumptions. Prescott et al. (2022) demonstrated that the Event Modeling Risk Assessment using Linked Diagrams (EMRALD) software tool, developed at Idaho National Laboratory (INL), can be coupled with the Modular Accident Analysis Program (MAAP5) for dynamic accident analysis in reactor plants. EMRALD forms models of potential accident scenarios, while MAAP5 simulates the accident progression and dose consequences. By integrating these software tools with utility-specific data, a more precise estimation of dose consequences from plant accidents can be achieved. Preliminary findings indicate that EMRALD provides accurate mean core damage frequencies for generalized accident scenarios. Future work includes expanding the model to account for plant-specific data and mitigation factors.

97 - MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Model Diagnostics for Equation Oriented Models: Roadblocks and the Path Forward

Conference paper for FOCAPD24 describing efforts to develop a unified workflow and toolbox for diagnosing issues in equation-oriented models as part of the IDAES modeling framework. The paper presents the work currently underway within the IDAES project to develop and integrate cutting edge model analysis techniques into a common toolbox and workflow for model developers to use.

Lee, Andrew↗
DOE OSTI2024

Jacobian-based Model Diagnostics and Application to Equation Oriented Modeling of a Carbon Capture System

Equation-oriented (EO) modeling has the potential to enable the effective design and optimization of the operation of advanced energy systems. However, advanced modeling of energy systems results in a large number of variables and non-linear equations, and it can be difficult to search through these to identify the culprit(s) responsible for convergence issues. The Institute for the Design of Advanced Energy Systems Integrated Platform (IDAES-IP) contains a tool to identify poorly scaled constraints and variables by searching for rows and columns of the Jacobian matrix with small L2-norms so they can be rescaled. A further singular value decomposition can be per-formed to identify degenerate sets of equations and remaining scaling issues. This work presents an EO model of a flowsheet developed for post-combustion carbon capture using a monoethanolamine (MEA) solvent system as a case study. The IDAES diagnostics tools were successfully applied to this flowsheet to identify problems to improve model robustness and enable the optimization of process design and operating conditions of a carbon capture system.

Allan, Douglas↗
NASA NTRS1971

An approximate theory of imperfect modeling with application to thermal modeling of spacecraft.

Proposal of a new concept of model testing which makes use of imperfect models and is based on the heuristic argument of representing the error states in a multidimensional Euclidean space when the errors in the modeling parameter are sufficiently small. By a separation of these errors into positive and negative groups, and from a consideration of the error paths in the hyperspaces, it is shown that the global effect of these errors may be evaluated with a good degree of approximation. Conditions under which the procedure would yield satisfactory results are discussed. To test the usefulness of the theory a computer experiment was conducted for the prediction of both transient and steady state thermal behavior of a hypothetical spacecraft using perfect, as well as imperfect, models.

Chao, B. T.↗
NASA NTRS1972

Model for energy transfer in the solar wind: Formulation of model

The two-fluid solar-wind model is extended by including the collisionless dissipation of hydromagnetic waves originating at the sun. A series of solar wind models is generated, parameterized by the total energy flux of hydromagnetic waves at the base of the model. The resulting properties of propagation and dissipating of hydromagnetic waves on this model are presented.

Hartle, R. E.↗
NASA NTRS1975

Thermal analytic model of 30 cm engineering model mercury ion thruster

A lumped parameter thermal nodal network was developed for a 30 cm Engineering Model Mercury Ion Thruster. The network consists of approximately 100 nodes coded in SINDA format for use on the Univac 1106/1108 computer. This model takes into account internal dissipation, radiation, and conduction as well as environmental heating. A series of tests were performed to simulate a wide range of thermal environments on an operating 30 cm thruster, instrumented to measure the temperature distribution within the thruster. The results of these tests were used to calibrate the analytical model. The analytical model along with comparisons between analytical and experimental results for the various operating conditions are presented.

Oglebay, J. C.↗
NASA NTRS1974

CNO abundances and hydrodynamic models of the nova outburst. III - 0.5 solar mass models with enhanced carbon, oxygen, and nitrogen

Consideration of the evolution of thermonuclear runaways in the hydrogen-rich envelopes of 0.5 solar mass carbon-oxygen white dwarfs. The larger radii of these stars, compared with the 1.00 solar mass white dwarfs, results in a lesser degree of degeneracy at the same depth in the star. Four models of luminosity with .00355 solar luminosity, differing only in the initial abundances of C-12, N-14, and O-16, are presented. The degree of enhancement required to produce mass ejection, and thereby a nova-type outburst, is greater than for the 1.00 solar mass model. Nevertheless, the evolution of the 0.5 solar mass model that ejected material is very similar to that of the 1.00 solar mass models, and it also ejects significant amounts of C-13, N-15, and O-17 into the interstellar medium. The 0.5 solar mass outburst is considerably less intense than the 1.00 solar mass outburst (even under optimum conditions), and this lower mass behavior is interpreted as associated with the observed outburst of the slowest novae.

Starrfield, S.↗
NASA NTRS1975

Results of aerodynamic heat transfer tests of a 0.0175-scale model of the Rockwell International Space Shuttle Orbiter 139 (model number 22-0) in the NASA/Ames 3.5-foot hypersonic wind tunnel (test OH6)

The results of a hypersonic wind tunnel test program conducted using a 0.0175 scale thin-skin thermocouple model of the Space Shuttle Orbiter to obtain aerodynamic heat transfer data on the Orbiter under simulated reentry conditions were presented. The test program was conducted at a Mach number of 7.3 and a freestream Reynolds number ranging between 1.0 and 6.0 million/foot. The model was tested for angles of attack ranging between 10 deg and 30 deg and a sideslip angle of 0 deg. The model was constructed of 15-5 PH stainless steel with the instrumented areas machined to a nominal skin thickness of 0.030 in. The model instrumentation consisted of 288 iron-constantan thermocouples spot welded to the skin inner surface, but only 75 of these were used in this test program. A high-speed, analog-to-digital data acquisition system was used to record data on magnetic tape.

Dye, W. H.↗
NASA NTRS1977

Formulation of consumables management models. Development approach for the mission planning processor working model

The mission planning processor is a user oriented tool for consumables management and is part of the total consumables subsystem management concept. The approach to be used in developing a working model of the mission planning processor is documented. The approach includes top-down design, structured programming techniques, and application of NASA approved software development standards. This development approach: (1) promotes cost effective software development, (2) enhances the quality and reliability of the working model, (3) encourages the sharing of the working model through a standard approach, and (4) promotes portability of the working model to other computer systems.

Connelly, L. C.↗
NASA NTRS1976

The global reference atmospheric model, mod 2 (with two scale perturbation model)

The Global Reference Atmospheric Model was improved to produce more realistic simulations of vertical profiles of atmospheric parameters. A revised two scale random perturbation model using perturbation magnitudes which are adjusted to conform to constraints imposed by the perfect gas law and the hydrostatic condition is described. The two scale perturbation model produces appropriately correlated (horizontally and vertically) small scale and large scale perturbations. These stochastically simulated perturbations are representative of the magnitudes and wavelengths of perturbations produced by tides and planetary scale waves (large scale) and turbulence and gravity waves (small scale). Other new features of the model are: (1) a second order geostrophic wind relation for use at low latitudes which does not "blow up" at low latitudes as the ordinary geostrophic relation does; and (2) revised quasi-biennial amplitudes and phases and revised stationary perturbations, based on data through 1972.

Justus, C. G.↗
NASA NTRS1977

Results of phase change heat transfer test OH51 using 0.006-scale space shuttle orbiter models 46-0 and 90-0 and partial wing 0.0175-scale model 64-0 in the LaRC 31-inch CFHT

Test OH51 was a phase change paint test conducted in the LaRC 31-inch CFHT utilizing models 46-0, 64-0, and 90-0. Model 46-0 represented the space shuttle configuration 139 Orbiter. Model 90-0 represented the configuration 140 Orbiter. Model 64-0 represented the forward 45% portion of the Orbiter wing. The partial wing was tested with a shock generator located at various positions relative to the wing. The test was conducted at Mach 10.0, angles of attack from 27.5 deg through 37.5 deg, and Reynolds numbers of 0.5 and 1.5 million per foot.

Cummings, J. W.↗
NASA NTRS1977

Formulation of consumables management models: Test plan for the mission planning processor working model

The test plan and test procedures to be used in the verification and validation of the software being implemented in the mission planning processor working model program are documented. The mission planning processor is a user oriented tool for consumables management and is part of the total consumables subsystem management concept. An overview of the working model is presented. Execution of the test plan will comprehensively exercise the working model software. An overview of the test plan, including a testing schedule, is presented along with the test plan for the unit, module, and system levels. The criteria used to validate the working model results for each consumables subsystem is discussed.

Connelly, L. C.↗
NASA NTRS1977

Monte Carlo analysis of uncertainty propagation in a stratospheric model. 1: Development of a concise stratospheric model

A concise model has been developed to analyze uncertainties in stratospheric perturbations, yet uses a minimum of computer time and is complete enough to represent the results of more complex models. The steady state model applies iteration to achieve coupling between interacting species. The species are determined from diffusion equations with appropriate sources and sinks. Diurnal effects due to chlorine nitrate formation are accounted for by analytic approximation. The model has been used to evaluate steady state perturbations due to injections of chlorine and NO(X).

Rundel, R. D.↗