Search NASA⌕ Search

SEARCH · Search NASA

Results for “NonDestructive Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

REAL TIME ULTRASONIC ALUMINUM SPOT WELD MONITORING SYSTEM

Aluminum alloys pose several properties that make them one of the most popular engineering materials: they have excellent corrosion resistance, and high weight-to-strength ratio. Resistance spot welding of aluminum alloys is widely used today but oxide film and aluminum thermal and electrical properties make spot welding a difficult task. Electrode degradation due to pitting, alloying and mushrooming decreases the weld quality and adjustment of parameters like current and force is required. To realize these adjustments and ensure weld quality, a tool to measure weld quality in real time is required. In this paper, a real time ultrasonic non-destructive evaluation system for aluminum spot welds is presented. The system is able to monitor nugget growth while the spot weld is being made. This is achieved by interpreting the echoes of an ultrasound transducer located in one of the welding electrodes. The transducer receives and transmits an ultrasound signal at different times during the welding cycle. Valuable information of the weld quality is embedded in this signal. The system is able to determine the weld nugget diameter by measuring the delays of the ultrasound signals received during the complete welding cycle. The article presents the system performance on aluminum alloy AA6022.

36 MATERIALS SCIENCE↗

DETECTION OF DISBONDING IN GLARE COMPOSITES USING LAMB WAVE APPROACH

Lamb-waves can be used to detect disbonds in composite plates. In this work, a photoacoustic technique was first applied to measure the dispersive property of a GLAss-REinforced (GLARE) composite panel. The measured phase velocity dispersion curves are consistent with the theoretical calculation using the classical transfer matrix method for layered media. Based on the obtained properties, a finite element method (FEM) model was constructed to study the influence of a disbond void on the Lamb wave propagation in the GLARE plate. It is found that the displacement amplitudes of the A{sub o} mode Lamb wave decrease while its travel time increases as the disbond size increases.

36 MATERIALS SCIENCE↗

STUDY OF AGING EFFECTS IN 2205 DUPLEX STAINLESS STEEL USING THERMOELECTRIC POWER MEASUREMENT

Thermoelectric power (TEP) measurements have been used as an effective method for evaluating the metallurgical state of various alloys. In the steel industry, some fabrication processes promote phase transformation and second phase precipitations which affect the material properties. Assessment of mechanical properties is critical in order to ensure quality of components. This work was conducted in order to evaluate the influence of the aging state of 2205 duplex stainless steel on TEP values. Commercial 2205 duplex steel was isothermally aged at 650 deg. C 700 deg. C and 900 deg. C at different aging times. TEP measurement technique was applied as a non destructive assessment technique to characterize the aging kinetics of the aged 2205 duplex stainless steel, hardness Rockwell (RC) and Charpy impact test were preformed to observe the effect of aging time on the specimens. Metallographic analysis was used to monitor phase transformation and sigma phase precipitation caused by the spinodal decomposition process of ferrite into secondary austenite and sigma phase. Results indicate that that the TEP is sensitive to gradual microstructural changes produced by the aging treatments.

36 MATERIALS SCIENCE↗

RELIABLE RADIOGRAPHIC INSPECTION OF FLEXIBLE RISERS FOR THE OIL INDUSTRY

Flexible risers are composite tubular structures manufactured by the concentric assemblage of cylindrical polymeric and helically wound metallic layers employed to convey pressurized fluids such as oil, gas and water in the ocean environment. The metallic layers account for the flexible risers' structural strength and are dimensioned according to the static and dynamic loads. They are usually installed in a free hanging catenary configuration and are subjected to the direct action of waves and marine currents and wave induced motions from the oil production platform. The fatigue rupture of wire armours in the end fitting or within the riser segment protected by the bend stiffener is an object of major concern. Integrity models have been developed, however inspection techniques are mandatory to ensure that failure is detected. Gammagraphy has been used as a common inspection technique in all regions of the flexible riser, mainly with the single wall-single view method. On the other side, there is not any qualified radiographic procedure to this kind of structure. Radiographic simulation was adopted and its validation with actual gammagraphies and establishment of radiographic parameters to complex radiation geometries were done. Results show the viability of the radiographic inspection analyzing the armour wires' rupture and the displacement between wires.

36 MATERIALS SCIENCE↗

ANALYSIS OF IMPACT DAMAGE USING LINE SCANNING THERMOGRAPHY

Impact damage in a composite shaft was studied using Line Scanning Thermography (LST), a novel dynamic thermography technique capable of inspecting large areas in short times. It is expected that projectile impact in a laminate composite will generate a discontinuity that affects heat propagation. Therefore, as heat is deposited over the impacted region, a hot spot will be observed. In this study several impact points were evaluated using UT and LST. Experiments show that assessing impact damage using LST is a dynamic process, which should be accounted for when using dynamic thermography to quantify impact damage extension and severity. The LST images provided information about the region affected by impact damage, which was consistent with the damage region determined using UT. It is seen that the damage areas obtained at early observation time after heat application show small areas with severe damage; and for further times after heat application, the temperature of the hot spots drops and the size of the region affected increases with time following a linear relationship with the observation time.

42 ENGINEERING↗

INFRARED IMAGING OF CARBON AND CERAMIC COMPOSITES: DATA REPRODUCIBILITY

Infrared NDE techniques have proven to be superior for imaging of flaws in ceramic matrix composites (CMC) and carbon silicon carbide composites (C/SiC). Not only can one obtain accurate depth gauging of flaws such as delaminations and layered porosity in complex-shaped components such as airfoils and other aeronautical components, but also excellent reproducibility of image data is obtainable using the STTOF (Synthetic Thermal Time-of-Flight) methodology. The imaging of large complex shapes is fast and reliable. This methodology as applied to large C/SiC flight components at the NASA Dryden Flight Research Center will be described.

36 MATERIALS SCIENCE↗

ULTRASONIC MEASUREMENT MODELS FOR SURFACE WAVE AND PLATE WAVE INSPECTIONS

A complete ultrasonic measurement model for surface and plate wave inspections is obtained, where all the electrical, electromechanical, and acoustic/elastic elements are explicitly described. Reciprocity principles are used to describe the acoustic/elastic elements specifically in terms of an integral of the incident and scattered wave fields over the surface of the flaw. As with the case of bulk waves, if one assumes the incident surface waves or plate waves are locally planar at the flaw surface, the overall measurement model reduces to a very modular form where the far-field scattering amplitude of the flaw appears explicitly.

36 MATERIALS SCIENCE↗

Determination of the Al Composition of Al{sub x}Ga{sub 1-x}N Thin Films By Means Of EDX and XRD Techniques

In this paper, the determinations of Al composition x of Al{sub x}Ga{sub 1-x}N(0{<=}x{<=}1) thin films by means of the energy dispersive X-ray (EDX) and X-ray diffraction (XRD) analyses are reported. Through these non-destructive and contactless techniques, a large probed area of the Al{sub x}Ga{sub 1-x}N samples can be selected. Consequently, the uncertainty due to the inhomogeneity of the Al composition can be avoided. For EDX measurements, the Al composition is calculated based on the weight percent of the Al and Ga elements, while that in the XRD measurements is based on lattice constant c and Vegard's law. The results from these two independent techniques are in good agreement with each other.

36 MATERIALS SCIENCE↗

Reduced ablative Rayleigh-Taylor growth measurements in indirectly driven laminated foils

Indirectly driven, ablative Rayleigh-Taylor instability growth measurements in Ge-doped plastic foils were studied using face-on and side-on x-ray radiography. Laminated samples consisting of alternating layers of Ge-doped and undoped plastic and homogeneous Ge-doped foils were considered. We show for the first time that hydrodynamics do not depend upon structuration of the samples and that stabilization occurs in the case of laminated samples. All data were found to be in good agreement with bi-dimensional hydrosimulations based on theoretical and numerical predictions published earlier [L. Masse, Phys. Rev. Lett. 98, 245001 (2007)], encouraging new designs using laminated structures for ignition capsules.

36 MATERIALS SCIENCE↗

Structured scintillator for hard x-ray grating interferometry

Grating interferometry at conventional x-ray tubes improves the quality of radiographies and tomograms by providing phase and scattering contrast data. The main challenge encountered when applying this technique at high photon energies, as required by many applications to obtain sufficient penetration depth, is to maintain a high fringe visibility. In this letter, we report on a substantial improvement in fringe visibility and according improvements in image quality achieved by replacing the absorbing analyzer grating of the interferometer with a structured scintillator grating. This development represents a significant step toward the implementation of this technique in industrial testing and medical applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A model of ultrasonic testing for cracks near a non-planar surface

Based on the methodology of the 2D models presented at QNDE 2008 and QNDE 2009, this paper presents an extension to 3D of a model of ultrasonic testing for cracks near a non-planar back surface. The elastic wave scattering in a thick-walled component by an interior rectangular crack located near a back surface of arbitrary geometry is considered. The 3D wave scattering problem is solved using a hybrid boundary integral equation method (BIEM): a displacement boundary element method (BEM) for the back surface displacements is combined with an analytical technique for the hypersingular traction integral equation for the crack-opening displacements. The action of ultrasonic transducers in transmission and reception is taken into account in the model, and a few numerical examples illustrating the influence of the back surface geometry are given.

42 ENGINEERING↗

Characterization of waviness in wind turbine blades using air coupled ultrasonics

Waviness in glass fiber reinforced composite is of great interest in composite research, since it results in the loss of stiffness. Several NDE techniques have been used previously to detect waviness. This work is concerned with waves normal to the plies in a composite. Air-coupled ultrasonics was used to detect waviness in thick composites used in the manufacturing of wind turbine blades. Composite samples with different wave aspect ratios were studied. Different wavy samples were characterized, and a three step process was developed to make sure the technique is field implementable. This gives us a better understanding of the effect of waviness in thick composites, and how it affects the life and performance of the composite.

42 ENGINEERING↗

Miniaturized hand held microwave interference scanning system for NDE of dielectric armor and armor systems

Inspection of ceramic-based armor has advanced through development of a microwave-based, portable, non-contact NDE system. Recently, this system was miniaturized and made wireless for maximum utility in field applications. The electronic components and functionality of the laboratory system are retained, with alternative means of position input for creation of scan images. Validation of the detection capability was recently demonstrated using specially fabricated surrogates and ballistic impact-damaged specimens. The microwave data results have been compared to data from laboratory-based microwave interferometry systems and digital x-ray imaging. The microwave interference scanning has been shown to reliably detect cracks, laminar features and material property variations. The authors present details of the system operation, descriptions of the test samples used and recent results obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulation supported POD: Methodology and HFET validation case

Structure reliability guaranty requires prior evaluation of non destructive testing methods. The concept of Probability of Detection (POD) is generally used to quantitatively assess performances and reliability of testing operations. Such probabilistic approaches take into account the uncertainties that appear during inspections and that are responsible for the output variability. POD curve determination is based on costly and time consuming experimental campaigns. Increasing demand of NDT configurations requiring POD evaluation makes cost reduction of POD campaigns a major issue. A new trend is to apply simulation in the context of probabilistic approaches in order to replace some of the experimental data required to determine the POD with simulation results. This paper presents results of simulation based POD curves of a high frequency eddy current inspection procedure obtained with the new POD module of CIVA. The methodology used for describing uncertainties on the input simulation parameters is described and comparisons with experimental results are presented and discussed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Neutron Induced Beta Radiography

In the present paper we give a new methodology named, 'neutron induced beta radiography-NIBR' which makes use of neutron activated Dy or In foils as source of (3-radiation. Radiographs are obtained with an aluminium cassette containing image plate, a sample under inspection and the activated Dy or In foil kept in tight contact. The sensitivity of the technique to thickness was evaluated for different materials in the form of step wedges. Some radiographs are presented to demonstrate potential of method to inspect thin samples.

07 ISOTOPE AND RADIATION SOURCES↗

Plasma Barodiffusion in Inertial-Confinement-Fusion Implosions: Application to Observed Yield Anomalies in Thermonuclear Fuel Mixtures

The observation of large, self-generated electric fields ({>=}10{sup 9} V/m) in imploding capsules using proton radiography has been reported [C. K. Li et al., Phys. Rev. Lett. 100, 225001 (2008)]. A model of pressure gradient-driven diffusion in a plasma with self-generated electric fields is developed and applied to reported neutron yield deficits for equimolar D{sup 3}He[J. R. Rygg et al., Phys. Plasmas 13, 052702 (2006)] and (DT){sup 3}He[H. W. Herrmann et al., Phys. Plasmas 16, 056312 (2009)] fuel mixtures and Ar-doped deuterium fuels [J. D. Lindl et al., Phys. Plasmas 11, 339 (2004)]. The observed anomalies are explained as a mild loss of deuterium nuclei near capsule center arising from shock-driven diffusion in the high-field limit.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

List of Preferred Electronic Parts

Components passed stringent qualification tests tabulated and described. Destructive and nondestructive qualification testing confirmed parts capable of withstanding spacecraft environments without excessive degradation and have stable characteristics during operating lives. Testing assessed effects of electrical, environmental, and mechanical stresses in various levels and time durations.

Covey, R. E.↗

APPLICATION FO FLOW FORMING FOR USE IN RADIOACTIVE MATERIAL PACKAGING DESIGNS

This paper reports on the development and testing performed to demonstrate the use of flow forming as an alternate method of manufacturing containment vessels for use in radioactive material shipping packaging designs. Additionally, ASME Boiler and Pressure Vessel Code, Section III, Subsection NB compliance along with the benefits compared to typical welding of containment vessels will be discussed. SRNL has completed fabrication development and the testing on flow formed containment vessels to demonstrate the use of flow forming as an alternate method of manufacturing a welded 6-inch diameter containment vessel currently used in the 9975 and 9977 radioactive material shipping packaging. Material testing and nondestructive evaluation of the flow formed parts demonstrate compliance to the minimum material requirements specified in applicable parts of ASME Boiler and Pressure Vessel Code, Section II. Destructive burst testing shows comparable results to that of a welded design. The benefits of flow forming as compared to typical welding of containment vessels are significant: dimensional control is improved due to no weld distortion; less final machining; weld fit-up issues associated with pipes and pipe caps are eliminated; post-weld non-destructive testing (i.e., radiography and die penetrant tests) is not necessary; and less fabrication steps are required. Results presented in this paper indicate some of the benefits in adapting flow forming to design of future radioactive material shipping packages containment vessels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗