Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHOTOELECTRICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Observation of complete space-charge-limited transport in metal-oxide-graphene heterostructure

The metal-oxide-graphene heterostructures have abundant physical connotations. As one of the most important physical properties, the electric transport property of the gold-chromium oxide-graphene heterostructure has been studied. The experimental measurement shows that the conductive mechanism is dominated by the space-charge-limited transport, a kind of bulk transport of an insulator with charge traps. Combining the theoretical analysis, some key parameters such as the carrier mobility and trap energy also are obtained. The study of the characteristics of the metal-oxide-graphene heterostructures is helpful to investigate the graphene-based electronic and photoelectric devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Oxygen related recombination defects in Ta{sub 3}N{sub 5} water splitting photoanode

A key route to improving the performance of Ta{sub 3}N{sub 5} photoelectrochemical film devices in solar driving water splitting to hydrogen is to understand the nature of the serious recombination of photo-generated carriers. Here, by using the temperature-dependent photoluminescence (PL) spectrum, we confirmed that for the Ta{sub 3}N{sub 5} films prepared by nitriding Ta{sub 2}O{sub 5} precursor, one PL peak at 561 nm originates from deep-level defects recombination of the oxygen-enriched Ta{sub 3}N{sub 5} phases, and another one at 580 nm can be assigned to band recombination of Ta{sub 3}N{sub 5} itself. Both of the two bulk recombination processes may decrease the photoelectrochemical performance of Ta{sub 3}N{sub 5}. It was difficult to remove the oxygen-enriched impurities in Ta{sub 3}N{sub 5} films by increasing the nitriding temperatures due to their high thermodynamically stability. In addition, a broadening PL peak between 600 and 850 nm resulting from oxygen related surface defects was observed by the low-temperature PL measurement, which may induce the surface recombination of photo-generated carriers and can be removed by increasing the nitridation temperature. Our results provided direct experimental evidence to understand the effect of oxygen-related crystal defects in Ta{sub 3}N{sub 5} films on its photoelectric performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photo-electrical and transport properties of hydrothermal ZnO

We performed the studies of optical, photoelectric, and transport properties of a hydrothermal bulk n-type ZnO crystal by using the contactless optical techniques: photoluminescence, light-induced transient grating, and differential reflectivity. Optical studies revealed bound exciton and defect-related transitions between the donor states (at ∼60 meV and ∼240 meV below the conduction band) and the deep acceptor states (at 0.52 eV above the valence band). The acceptor state was ascribed to V{sub Zn}, and its thermal activation energy of 0.43 eV was determined. A low value of carrier diffusion coefficient (∼0.1 cm{sup 2}/s) at low excitations and temperatures up to 800 K was attributed to impact the recharged deep acceptors. Electron and hole mobilities of 140 and ∼80 cm{sup 2}/Vs, correspondently, were determined at room temperature. The decrease of carrier lifetime with excitation was ascribed to increasing rate of radiative recombination at low temperatures and nonradiative recombination above the room temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Silver nanowires-templated metal oxide for broadband Schottky photodetector

Silver nanowires (AgNWs)-templated transparent metal oxide layer was applied for Si Schottky junction device, which remarked the record fastest photoresponse of 3.4 μs. Self-operating AgNWs-templated Schottky photodetector showed broad wavelength photodetection with high responsivity (42.4 A W{sup −1}) and detectivity (2.75 × 10{sup 15} Jones). AgNWs-templated indium-tin-oxide (ITO) showed band-to-band excitation due to the internal photoemission, resulting in significant carrier collection performances. Functional metal oxide layer was formed by AgNWs-templated from ITO structure. The grown ITO above AgNWs has a cylindrical shape and acts as a thermal protector of AgNWs for high temperature environment without any deformation. We developed thermal stable AgNWs-templated transparent oxide devices and demonstrated the working mechanism of AgNWs-templated Schottky devices. We may propose the high potential of hybrid transparent layer design for various photoelectric applications, including solar cells.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanographite-TiO{sub 2} photoanode for dye sensitized solar cells

Nanographite-TiO{sub 2} (NG-TiO{sub 2}) composite was successfully synthesized by the hydrothermal method and its performance as the photoanode for dye-sensitized solar cells (DSSCs) was investigated. Environmental Scanning electron microscope (E-SEM) micrographs show the uniform distribution of TiO{sub 2} nanoflowers deposited over nanographite sheets. The average performance characteristics of the assembled cell in terms of short-ciruit current density (J{sub SC}), open circuit voltage (V{sub OC}), fill factor (FF) and photoelectric conversion efficiency (η) were measured.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coexistence of negative photoconductivity and hysteresis in semiconducting graphene

Solution-processed graphene quantum dots (GQDs) possess a moderate bandgap, which make them a promising candidate for optoelectronics devices. However, negative photoconductivity (NPC) and hysteresis that happen in the photoelectric conversion process could be harmful to performance of the GQDs-based devices. So far, their origins and relations have remained elusive. Here, we investigate experimentally the origins of the NPC and hysteresis in GQDs. By comparing the hysteresis and photoconductance of GQDs under different relative humidity conditions, we are able to demonstrate that NPC and hysteresis coexist in GQDs and both are attributed to the carrier trapping effect of surface adsorbed moisture. We also demonstrate that GQDs could exhibit positive photoconductivity with three-order-of-magnitude reduction of hysteresis after a drying process and a subsequent encapsulation. Considering the pervasive moisture adsorption, our results may pave the way for a commercialization of semiconducting graphene-based and diverse solution-based optoelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Intensity-dependent nonlinearity of the lateral photoconductivity in InGaAs/GaAs dot-chain structures

Photoelectric properties of laterally correlated multilayer InGaAs/GaAs quantum dots (QDs) heterostructures are studied. The response of the photocurrent to increasing excitation intensity is found to be nonlinear and varying with excitation energy. The structures are photosensitive in a wide range of photon energies above 0.6 eV. The spectral dependence of the photoconductivity (PC) is caused by strong interaction between the bulk GaAs and the lower energy states of the wetting layer, the QDs, as well as the defect states in the GaAs band gap. In particular, a mechanism for the participation of deep electron trap levels in the photocurrent is clarified. These structures also demonstrate a high sensitivity of up to 10 A/W at low excitation intensities. However, at higher excitation intensities, the sensitivity reduces exhibiting a strong spectral dependence at the same time. The observed sublinear PC dependence on excitation power results from a direct electron-hole recombination both in the QDs and in GaAs host. The solution of rate equations included the contributions of QD ground and exited states, bulk GaAs states and the states of defects within the GaAs bandgap describes well the experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tomography of atomic number and density of materials using dual-energy imaging and the Alvarez and Macovski attenuation model

Dual-energy computed tomography and the Alvarez and Macovski [Phys. Med. Biol. 21, 733 (1976)] transmitted intensity (AMTI) model were used in this study to estimate the maps of density (ρ) and atomic number (Z) of mineralogical samples. In this method, the attenuation coefficients are represented [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976)] in the form of the two most important interactions of X-rays with atoms that is, photoelectric absorption (PE) and Compton scattering (CS). This enables material discrimination as PE and CS are, respectively, dependent on the atomic number (Z) and density (ρ) of materials [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976)]. Dual-energy imaging is able to identify sample materials even if the materials have similar attenuation coefficients at single-energy spectrum. We use the full model rather than applying one of several applied simplified forms [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976); Siddiqui et al., SPE Annual Technical Conference and Exhibition (Society of Petroleum Engineers, 2004); Derzhi, U.S. patent application 13/527,660 (2012); Heismann et al., J. Appl. Phys. 94, 2073–2079 (2003); Park and Kim, J. Korean Phys. Soc. 59, 2709 (2011); Abudurexiti et al., Radiol. Phys. Technol. 3, 127–135 (2010); and Kaewkhao et al., J. Quant. Spectrosc. Radiat. Transfer 109, 1260–1265 (2008)]. This paper describes the tomographic reconstruction of ρ and Z maps of mineralogical samples using the AMTI model. The full model requires precise knowledge of the X-ray energy spectra and calibration of PE and CS constants and exponents of atomic number and energy that were estimated based on fits to simulations and calibration measurements. The estimated ρ and Z images of the samples used in this paper yield average relative errors of 2.62% and 1.19% and maximum relative errors of 2.64% and 7.85%, respectively. Furthermore, we demonstrate that the method accounts for the beam hardening effect in density (ρ) and atomic number (Z) reconstructions to a significant extent.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CFD simulation of simultaneous monotonic cooling and surface heat transfer coefficient

The monotonic heating regime method for determination of thermal diffusivity is based on the analysis of an unsteady-state (stabilised) thermal process characterised by an independence of the space-time temperature distribution on initial conditions. At the first kind of the monotonic regime a sample of simple geometry is heated / cooled at constant ambient temperature. The determination of thermal diffusivity requires the determination rate of a temperature change and simultaneous determination of the first eigenvalue. According to a characteristic equation the first eigenvalue is a function of the Biot number defined by a surface heat transfer coefficient and thermal conductivity of an analysed material. Knowing the surface heat transfer coefficient and the first eigenvalue the thermal conductivity can be determined. The surface heat transport coefficient during the monotonic regime can be determined by the continuous measurement of long-wave radiation heat flow and the photoelectric measurement of the air refractive index gradient in a boundary layer. CFD simulation of the cooling process was carried out to analyse local convective and radiative heat transfer coefficients more in detail. Influence of ambient air flow was analysed. The obtained eigenvalues and corresponding surface heat transfer coefficient values enable to determine thermal conductivity of the analysed specimen together with its thermal diffusivity during a monotonic heating regime.

42 ENGINEERING↗

Light induced suppression of Kondo effect at amorphous LaAlO{sub 3}/SrTiO{sub 3} interface

We report photoelectric properties of two-dimensional electron gas (2DEG) at an amorphous LaAlO{sub 3}/SrTiO{sub 3} interface. Under visible light illumination (650 nm), an enhancement of electric conductivity is observed over the temperature range from 2 to 300 K. Particularly, a resistance upturn appearing below 25 K, which is further proved to from the Kondo effect, is suppressed by the 650 nm visible light. From the results of light-assisted Hall measurements, light irradiation increases the carrier mobility rather than carrier density in the Kondo regime. It is suggested that light induces the decoherence effect of localized spin states, hence the electron scattering is weakened and the carrier mobility is improved accordingly. Moreover, the enhancement of electrical conductivity by visible light verifies that in-gap states located in the SrTiO{sub 3} side of the interface play an important role in the electrical transport of the amorphous SrTiO{sub 3}-based oxide 2DEG system. Our results provide deeper insight into the photoinduced effects in the 2DEG system, paving the way for the design of optoelectronic devices based on oxides.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimization schemes for efficient multiple exciton generation and extraction in colloidal quantum dots

Multiple exciton generation (MEG) is a process in which more than one electron hole pair is generated per absorbed photon. It allows us to increase the efficiency of solar energy harvesting. Experimental studies have shown the multiple exciton generation yield of 1.2 in isolated colloidal quantum dots. However real photoelectric devices require the extraction of electron hole pairs to electric contacts. We provide a systematic study of the corresponding quantum coherent processes including extraction and injection and show that a proper design of extraction and injection rates enhances the yield significantly up to values around 1.6.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical and electrical properties of Cu-based all oxide semi-transparent photodetector

Zero-bias operating Cu oxide-based photodetector was achieved by using large-scale available sputtering method. Cu oxide (Cu{sub 2}O or CuO) was used as p-type transparent layer to form a heterojunction by contacting n-type ZnO layer. All metal-oxide materials were employed to realize transparent device at room temperature and showed a high transparency (>75% at 600 nm) with excellent photoresponses. The structural, morphological, optical, and electrical properties of Cu oxides of CuO and Cu{sub 2}O are evaluated in depth by UV-visible spectrometer, X-ray diffraction, scanning electron microscopy, atomic force microscopy, Kelvin probe force microscopy, and Hall measurements. We may suggest a route of high-functional Cu oxide-based photoelectric devices for the applications in flexible and transparent electronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Noise mitigation methods for ion detectors operating with a direct view of high temperature plasmas

In this work, we have developed an ion current measurement instrument with a direct view of a plasma that reduces the particle and radiation-induced noise current it detects by over three orders of magnitude, from tens of microamps to tens of nanoamps. This is accomplished using electric fields, magnetic fields, and physical shielding that limit the flux of particles and radiation into the instrument and suppress the secondary electrons produced within it by particle and radiation impact. Operation of this detector in various configurations, without an ion beam, has allowed identification of the sources of noise current. In our experimental setup, the largest noise contributors were found to be plasma ions and photoelectric emission due to UV radiation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Topological insulators for the generation of electron beams

Measurements of photo-yields from various topological insulators (TIs) in ultra-high vacuum were made. Marked differences in the photoelectric yield were found between the freshly in-vacuum cleaved and the atmosphere cleaved TI samples. The spectral dependence of their quantum efficiency (QE) was obtained in as-cleaved and cesiated TI samples. Inferred work functions ranging from 5 to 5.5 eV were found in all TI samples before cesiation, and they were lowered by ~0.5 eV after cesiation. At the ultraviolet wavelength of 268 nm, the QE of all samples is ~2 × 10 -7 before cesiation but improved to 10 -4 –10 -3 after cesiation. In conclusion, knowledge of the QE has practical implication and can serve as a useful guide for the development of a spin-polarized electron source. However, the spin polarized nature of the photo-emitted electron remains yet to be explored.

43 PARTICLE ACCELERATORS↗

AlGaN/GaN metal–insulator–semiconductor high electron mobility transistors (MISHEMTs) using plasma deposited BN as gate dielectric

AlGaN/GaN metal–insulator–semiconductor high electron mobility transistors (MISHEMTs) were fabricated on Si substrates with a 10 nm boron nitride (BN) layer as a gate dielectric deposited by electron cyclotron resonance microwave plasma chemical vapor deposition. The material characterization of the BN/GaN interface was investigated by X-ray photoelectric spectroscopy (XPS) and UV photoelectron spectroscopy. The BN bandgap from the B1s XPS energy loss is ~5 eV consistent with sp2 bonding. The MISHEMTs exhibit a low off-state current of 1 × 10 –8 mA/mm, a high on/off current ratio of 10 9 , a threshold voltage of –2.76 V, a maximum transconductance of 32 mS/mm at a gate voltage of –2.1 V and a drain voltage of 1 V, a subthreshold swing of 69.1 mV/dec, and an on-resistance of 12.75 Ω·mm. The interface state density (D it ) is estimated to be less than 8.49 × 10 11 cm –2 eV –1 . Gate leakage current mechanisms were investigated by temperature-dependent current–voltage measurements from 300 K to 500 K. The maximum breakdown electric field is no less than 8.4 MV/cm. Poole–Frenkel emission and Fowler–Nordheim tunneling are indicated as the dominant mechanisms of the gate leakage through the BN gate dielectric at low and high electric fields, respectively.

36 MATERIALS SCIENCE↗

Multicolour photodetector based on a ZnSe/ZnTe/GaAs heterostructure

Structural, optical, and photoelectric properties of a ZeSe/ZnTe/GaAs heterostructure and a metal – semiconductor – metal detector (MSM-detector) based on this heterostructure are investigated. The composition and thickness of individual layers of the heterostructure are determined by the methods of energy dispersive analysis and Raman spectroscopy, and the optical properties are studied using the photoluminescence spectra. The ZeSe/ZnTe/GaAs heterostructure MSM-detector is highly sensitive. In particular, at a wavelength of 620 nm, the detector response signal corresponds to an ampere – watt sensitivity of 0.19 A W{sup −1} and an external quantum efficiency of 38 %. The MSM-detector photoresponse demonstrates three peaks located at wavelengths of 510, 620, and 870 nm. For the MSM-diode with a pin contact width of 2.8 μm, distances between them of 2.8 μm, and a total photosensitive area of 100 × 100 μm, the dark current density at room temperature constitutes 10{sup −8} A cm{sup −2}. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Light-responsive organic flashing electron ratchet

Significance Transport of objects in man-made systems typically relies on energy gradients that span the distance over which the particles must travel. Biological systems do not have these large-scale gradients available and instead transport particles with repeated local interactions between asymmetric structures, powered by nondirectional sources of energy like heat or chemical reactions. This process is called “ratcheting.” Here, we exploit the ratcheting mechanism to transport charge-carrying particles, electrons, through an amorphous organic film in which local structural inhomogeneities disrupt the gradients needed for typical electrical conduction to occur efficiently. This work explores basic mechanisms by which energy that is normally wasted in an electronic or photoelectrical device could be harnessed to do electrical work.

59 BASIC BIOLOGICAL SCIENCES↗