Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLANETARY MASS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

U.S. In-Space Electric Propulsion Experiments

Arcjet and ion propulsion offer potentially significant reductions in the mass of propulsion systems required for Earth orbiting satellites and planetary spacecraft. For this reason, they have been the subject of validation and demonstration programs. After examining the benefits of electric propulsion, this paper discusses the technology base for the Electric propulsion Space Experiment (ESEX) arcjet demonstration experiment and the NASA SEP Technology Application Readiness (NSTAR) ion propulsion validation program. As part of the Advanced Research and Global Observation Spacecraft (ARGOS), ESEX will perform ten 15-minute firings of a 30 kW ammonia arcjet. NASA's validation program, NSTAR, consists of two major elements: a ground-test element and an in-space experiment. The ground-test element will validate the life, intergrability, and performance of low-power ion propulsion. The in-space element will demonstrate the feasibility of integrating and flying an ion propulsion system. The experiment will measure the interactions among the ion propulsion system, the host spacecraft, and the surrounding space plasma; and it will provide a quantitative assessment of the ability of ground testing to replicate the in-space performance of ion thrusters. By involving industry in NSTAR, a commercial source for this technology will be ensured. Furthermore, the successful completion of the NSTAR validation program will stimulate commercial and government (both civilian and military) uses of this technology.

arcjet↗
NASA NTRSDate not supplied

The Payload and Operations of the Hera Mission

On 26 September 2022, NASA’s DART mission successfully impacted on Dimorphos, the secondary of the binary asteroid Didymos. DART released the Light Italian Cubesat for Imaging of Asteroids (LICIACube) two weeks before the impact, and LICIACube flew by the asteroids three minutes after the impact. On approach, DART took images of both asteroids, which, supported by additional imagery from LICIACube, characterized the pre-impact state of the Didymos system. DART changed the orbit of Dimorphos around Didymos, reducing its orbital period by 33 minutes. DART will be followed by a detailed investigation of the Didymos system and the outcome of the impact by ESA’s Hera mission. Hera will be launched in October 2024 and arrive at Didymos in early 2027. The presentation will focus on the payload of the Hera mission and the operations at the asteroid system. The main objectives of the Hera mission are to: - Measure the mass of Dimorphos to accurately measure the momentum transfer efficiency of the DART impact. - Characterise the change of the surface of Dimorphos by DART, including the properties (and existence!) of the DART crater, to improve our understanding of impact physics and to observe unweathered material, recently exposed at the surface. - Determine the physical properties of Dimorphos, including its internal structure, to allow scaling of the impact to different types of asteroids. - Measure the dynamical and physical state of the Didymos and Dimorphos system to constrain binary formation scenarios. Hera is equipped with the following payload: Two Asteroid Framing Cameras (AFCs) for both science and navigation. There resolution is ~10-4 rad/pixel, or 40 cm/pixel for close observations from 4 km. They will provide the target global properties as well as local geomorphology and will investigate the crater and impact site. They will also measure the mass of Dimorphos through the “wobble” motion of Didymos. The Planetary ALTimeter (PALT) will measure the distance to the target and shape and topography information complementary to that from AFC images. The Thermal InfraRed Imager (TIRI) will provide information about the thermal properties of the Didymos system and spectral information in the mid-infrared (6 bands from 7 – 14 µm). The Hyperscout-H hyperspectral imager will provide mineralogical information from 25 spectral bands between 665 and 975 nm. Milani, a 6 unit cubesat, will carry a visible to near-IR imaging spectrometer (ASPECT, 500 – 2500 nm) to derive mineralogical information on the composition of the asteroids, and a thermogravimeter (VISTA) to measure the abundance and constrain the composition of ambient dust particles. Juventas, a 6 unit cubesat, will carry a monostatic low-frequency radar (JuRa), and a gravimeter (GRASS) to derive interior and surface properties of the asteroids. The Radio Science experiment will measure the gravity field of the Didymos system. Measurements of the acceleration of the Hera spacecraft by the asteroid pair through the radio link between Earth and Hera will be used as well as the inter-satellite link between Hera and the two cubesats. We will describe how the goals of Hera will be achieved with the different payload elements.

Michael Küppers↗
NASA NTRSDate not supplied

Evaluation of Magnet Configurations for Magnetohydrodynamic Trajectory Control during Planetary Entry

Magnetohydrodynamics is a phenomenon that can be harnessed during planetary entry to augment aerodynamic drag and may enable higher mass payloads to safely reach the surface. The magnetohydrodynamic force is quantified over a wide range of freestream conditions using computational fluid dynamics results from a previous study. The force is calculated for an array of small electromagnets, a large non-superconducting magnet, a large superconducting magnet, and a uniform field. The superconducting magnet produces a magnetohydrodynamic force within an order of magnitude of aerodynamic drag for velocities higher than 10 km/s, indicating that it may have a reasonable impact on the trajectory for some cases. The array of small magnets and non-superconducting magnet produced a magnetohydrodynamic force that is less than 1% of the aerodynamic drag, so their magnetic fields are not strong enough to affect an entry trajectory. Additionally, the magnet placement plays an important role in magnetohydrodynamic force magnitude, with a magnet located near the shoulder producing approximately eight times more force than a magnet placed on the axis of symmetry. A mass and power budget for each magnet configuration is given assuming current state-of-the-art magnet technology. This study also discusses implementation challenges for each type of magnet on a spacecraft.

Magnetohydrodynamics↗
NASA NTRS1986

The size distributions of fragments ejected at a given velocity from impact craters

The mass distribution of fragments that are ejected at a given velocity for impact craters is modeled to allow extrapolation of laboratory, field, and numerical results to large scale planetary events. The model is semi-empirical in nature and is derived from: (1) numerical calculations of cratering and the resultant mass versus ejection velocity, (2) observed ejecta blanket particle size distributions, (3) an empirical relationship between maximum ejecta fragment size and crater diameter, (4) measurements and theory of maximum ejecta size versus ejecta velocity, and (5) an assumption on the functional form for the distribution of fragments ejected at a given velocity. This model implies that or planetary impacts into competent rock, the distribution of fragments ejected at a given velocity is broad, e.g., 68% of the mass of the ejecta at a given velocity contains fragments having a mass less than 0.1 times a mass of the largest fragment moving at that velocity. The broad distribution suggests that in impact processes, additional comminution of ejecta occurs after the upward initial shock has passed in the process of the ejecta velocity vector rotating from an initially downward orientation. This additional comminution produces the broader size distribution in impact ejecta as compared to that obtained in simple brittle failure experiments.

Okeefe, J. D.↗
NASA NTRS2008

Visual Feedback for Rover-based Coring

Technology for coring from a low-mass rover has been developed to enable core sample acquisition where a planetary rover experiences moderate slip during the coring operation. A new stereo vision technique, Absolute Motion Visual Odometry, is used to measure rover slip during coring and the slip is accommodated through corresponding arm pose updating. Coring rate is controlled by feedback of themeasured force of the coring tool against the environment. Test results in the JPL Marsyard show for the first time that coring from a low-mass rover with slip is feasible.

sampling↗
NASA NTRS2013

UltraSail CubeSat Solar Sail Flight Experiment

UltraSail is a next-generation, highrisk, high-payoff sail system for the launch, deployment, stabilization, and control of very large (km2 class) solar sails enabling high payload mass fractions for interplanetary and deep space spacecraft. UltraSail is a non-traditional approach to propulsion technology achieved by combining propulsion and control systems developed for formation- flying microsatellites with an innovative solar sail architecture to achieve controllable sail areas approaching 1 km2, sail subsystem area densities approaching 1 g/m2, and thrust levels many times those of ion thrusters used for comparable deep space missions. UltraSail can achieve outer planetary rendezvous, a deep-space capability now reserved for high-mass nuclear and chemical systems. There is a twofold rationale behind the UltraSail concept for advanced solar sail systems. The first is that sail-andboom systems are inherently size-limited. The boom mass must be kept small, and column buckling limits the boom length to a few hundred meters. By eliminating the boom, UltraSail not only offers larger sail area, but also lower areal density, allowing larger payloads and shorter mission transit times. The second rationale for UltraSail is that sail films present deployment handling difficulties as the film thickness approaches one micrometer. The square sail requires that the film be folded in two directions for launch, and similarly unfolded for deployment. The film is stressed at the intersection of two folds, and this stress varies inversely with the film thickness. This stress can cause the film to yield, forming a permanent crease, or worse, to perforate. By rolling the film as UltraSail does, creases are prevented. Because the film is so thin, the roll thickness is small. Dynamic structural analysis of UltraSail coupled with dynamic control analysis shows that the system can be designed to eliminate longitudinal torsional waves created while controlling the pitch of the blades, while using solar photon pressure to slew the spin axis. Vacuum tests have also verified that electrostatic and molecular adhesion forces can substantially be eliminated by making the film electrically conductive, reducing the peel force of the film off the storage roll to levels of 100s of micro-N. The innovation demonstrated the capability of deploying a six-micron aluminum- coated film from a reel through a slit in vacuum. The innovation also demonstrated a spin-stabilized method for deploying a long reel of solar sail film using solar pressure to spin-up and orbit raise the satellite, and also a gravity gradient method for deploying a long reel of solar sail film using solar pressure to orbit raise the satellite. The solar sail mass fraction of 25% is consistent with high specific impulse ion systems, but without the added weight and cost of a power source and processing unit. The large sail area, coupled with low film density, is giving UltraSail a high payload fraction. The UltraSail deployment scheme unrolls a micrometerscale reflection-coated polyimide film from a storage mandrel to a maximum length of several kilometers with the aid of a blade tip satellite.

Carroll, David↗
NASA NTRS1987

The size distributions of fragments ejected at a given velocity from impact craters

The mass distribution of fragments that are ejected at a given velocity for impact craters is modeled to allow extrapolation of laboratory, field, and numerical results to large scale planetary events. The model is semi-empirical in nature and is derived from: (1) numerical calculations of cratering and the resultant mass versus ejection velocity, (2) observed ejecta blanket particle size distributions, (3) an empirical relationship between maximum ejecta fragment size and crater diameter, (4) measurements and theory of maximum ejecta size versus ejecta velocity, and (5) an assumption on the functional form for the distribution of fragments ejected at a given velocity. This model implies that for planetary impacts into competent rock, the distribution of fragments ejected at a given velocity is broad, e.g., 68 percent of the mass of the ejecta at a given velocity contains fragments having a mass less than 0.1 times a mass of the largest fragment moving at that velocity. The broad distribution suggests that in impact processes, additional comminution of ejecta occurs after the upward initial shock has passed in the process of the ejecta velocity vector rotating from an initially downward orientation. This additional comminution produces the broader size distribution in impact ejecta as compared to that obtained in simple brittle failure experiments.

O'Keefe, John D.↗
NASA NTRS1995

Low-Mass Inflation Systems for Inflatable Structures

The use of inflatable space structures has often been proposed for aerospace and planetary applications. Communication, power generation, and very-long-baseline interferometry are just three potential applications of inflatable technology. The success of inflatable structures depends on the development of an applications of inflatable technology. This paper describes two design studies performed to develop a low mass inflation system. The first study takes advantage of existing onboard propulsion gases to reduce the overall system mass. The second study assumes that there is no onboard propulsion system. Both studies employ advanced components developed for the Pluto fast flyby spacecraft to further reduce mass. The study examined four different types of systems: hydrazine, nitrogen and water, nitrogen, and xenon. This study shows that all of these systems can be built for a small space structure with masses lower than 0.5 kilograms.

Thunnissen, Daniel P.↗
NASA NTRS2017

Exploring the Utilization of Low-Pressure, Piston-Cylinder Experiments to Determine the Bulk Compositions of Finite, Precious Materials

Determining the bulk composition of precious materials with a finite mass (e.g., meteorite samples) is extremely important in the fields of Earth and Planetary Science. From meteorite studies we are able to place constraints on large scale planetary processes like global differentiation and subsequent volcanism, as well as smaller scale processes like crystallization in a magma chamber or sedimentary compaction at the surface. However, with meteorite samples in particular, far too often we are limited by how precious the sample is as well as its limited mass. In this study, we have utilized aliquots of samples previously studied for toxicological hazards, including both the fresh samples (lunar mare basalt NWA 4734, lunar regolith breccia NWA 7611, martian basalt Tissint, martian regolith breccia NWA 7034, a vestian basalt Berthoud, a vestian regolith breccia NWA 2060, and a terrestrial mid-ocean ridge basalt (MORB)), and those that underwent iron leaching (Tissint, NWA 7034, NWA 4734, MORB). With these small masses of material, we performed low pressure (approx. 0.75 GPa), high temperature (greater than 1600 degrees Celsius) melting experiments. Each sample was analyzed using a JEOL 8530F electron microprobe to determine the bulk composition of the materials that were previously examined. When available, the results of our microprobe data were compared with bulk rock compositions in the literature. The results of this study show that with this technique, only approx. 50 mg of sample is required to accurately determine the bulk composition of the materials of interest.

Vander Kaaden, K. E.↗
NASA NTRS2018

Sample Return Systems for Extreme Environments (SaRSEE)

Sample return missions offer a greater science yield when compared to missions that only employ in situ experiments or remote sensing observations, since they allow the application of more complex technological and analytical methodologies in controlled terrestrial laboratories,that are both repeatable and can be independently verified. The successful return of extraterrestrial materials over the last four decades has contributed to our understanding of the solar system, but retrieval techniques have largely depended on the use of either soft-landing, or touch-and-go procedures that result in high V requirements, larger spacecraft mass ratios, and return yields typically limited to a few grams of surface materials that have experienced varying degrees of alteration from space weathering. Hard-landing methods using planetary penetrators offer an alternative for sample return that significantly reduce a mission's V and mass ratios,increase sample yields, and allow for the collection of subsurface materials, and lessons can be drawn from previous sample return missions. The following details progress in the design,development, and testing of penetrator/sampler technology capable of surviving subsonic and low, supersonic impact velocities (<700 m/s) that would enable the collection of geologic materials using tether technology to return the sample to a passing spacecraft. The testing of energy absorbing material for protecting the sample, design evolution and field testing of the penetrator, and dynamic modeling of tether behavior during sampling are discussed. It is shown through both modeling and field testing that penetrators at speeds between 300-600 m/s (~Mach 1-2) can penetrator into the ground to depths of 1-2 m with overall structural integrity attained.The first flight tests demonstrated the potential for survivability at these speeds. The second flight series demonstrated core sample collection with partial ejection of the sample return canister. The 3rd flight series demonstrated self-ejection of the sample return system fully intact and with the core retaining the full stratigraphy of the rock bed. The tether analysis shows that the forces on the tether during release and return of the sample to the main spacecraft are all at levels that can easily be handled by existing tether materials. The mass analysis of the requirements indicates that sample return form the asteroids could be handled with Discovery or New Frontier range of missions dependent on the number of samples to be returned to the Earth.

Winglee, R. M.↗
NASA NTRS2014

Development Of FIAT-Based Parametric Thermal Protection System Mass Estimating Relationships For NASA's Multi-Mission Earth Entry Concept

An integrated tool called the Multi Mission System Analysis for Planetary Entry Descent and Landing (M-SAPE) is being developed as part of NASAs In-Space Propulsion Technology (ISPT) program. Part of M-SAPEs development requires the formulation of mass estimating relationships (MERs) to determine the vehicle's Thermal Protection System (TPS) material and required thickness for safe Earth entry. The objective of this study was to develop MERs using simple correlations that were non-ITAR and matched as accurately as possible NASAs high-fidelity ablation modeling tool, the Fully Implicit Ablation and Thermal Analysis Program (FIAT ). These MERs would be a first-estimate for feasibility studies; it is understood that higher-fidelity modeling like FIAT would be necessary once a proposed trajectory was down-selected. The trajectory space for these MERS consisted of 840 different trajectories, and a materials heating limit was the main constraint for an allowable trajectory. MERs for the vehicle fore body included the ablating materials Phenolic Impregnated Carbon Ablator (PICA ) and Carbon Phenolic atop Advanced Carbon-Carbon. For the backshell the materials were Silicone Impregnated Reusable Ceramic Ablator (SIRCA ), Acusil II, SLA-561V, and LI-900. The MERFIAT ratio indicates MERs are accurate to within 14 percent (at one standard deviation) of FIAT prediction, and the most any MER can under-predict TPS thickness is 18.7 percent of FIAT prediction. This poster focuses on the development of these MERs, the resulting equations, model limitations, and model accuracy.

thermal protection system↗
NASA NTRS1974

On the origin of the solar system. I

The empirical information on protostars is reviewed. 'Globules' are described, found to have the typical range of stellar masses and with gaseous compositions now well known thanks largely to radio astronomy. They also contain particulate matter identified as silicates, ice, and probably graphite and other carbon compounds. Current knowledge of the degree of stability of the planetary orbits over the past 4.5 b.y. is summarized. The statistics on the frequency and masses of asteroids and information on the Kirkwood gaps, both empirical and theoretical, are cited. An analogous discussion is made for the Rings of Saturn, including its extension observed in 1966 to the fourth Saturn satellite, Dione. The three main classes of meteorites - irons, stones, and carbonaceous chondrites - all appear to be of asteroidal origin and they yield the most direct evidence on the early thermal history of the solar system. The author sees in this evidence definite confirmation of the cold origin of the planetary system, followed by a hot phase due to the evolving sun that caused the dissolution of the solar nebula.

Kuiper, G. P.↗
NASA NTRS1982

Planetary-scale characteristics of the atmospheric circulation during January and February 1979

The global scale mass and wind fields observed during FGGE special observing period (SOP) are studied, with attention given to the time variation and vertical structure of the ultralong waves. A spherical harmonic representation is developed for the global fields. The tropical circulation is found to imprint more amplitude on the lower-order components than the midlatitude circulation does. High amplitude oscillations are determined to be present in the divergent fields on all time scales, i.e., diurnal to monthly. The global scale wind was found to change on scales approaching a week. Good agreement with teleconnection predictions was demonstrated for the cross-equatorial divergent and zonal rotational flow changes. The global scale was concluded to resemble force modes of linear tidal theory, with important contributions from longitudinal heating gradients.

Paegle, J.↗
NASA NTRSDate not supplied

Isotopic Tracers for CO 2 Produced During A Planetary Impact Into Limestone Target Rocks

Terrestrial meteorite impacts have been directly linked with multiple mass extinction events throughout Earth’s history. Among these impacts, those that land in sedimentary target rocks are thought to generate large quantities of CO 2 via decarbonation. This injection of CO 2 into the atmosphere has the potential to alter the climate and threaten terrestrial habitability. The magnitude of this change depends upon the net amount of CO 2 released, which is controlled by how much CO 2 is produced by the impact, how much CO 2 is removed by back-reactions after the impact, and other post-impact CO 2 sinks. To interrogate the behavior of CO 2 release into the impact atmosphere, we present carbon (δ 13 C), oxygen (δ 18 O), and clumped (Δ 47 ) isotope results from carbonate clasts preserved within the impact breccia of the Steen River Impact Structure (SRIS) in Alberta, Canada. These clasts exhibit a ~65‰ range in δ 13 C and a ~5‰ variation in δ 18 O. However, while δ 13 C and δ 18 O are positively correlated, Δ 47 unexpectedly has a negative relationship with δ 13 C and δ 18 O. Based on prior assumptions, there would either be (1) no relationship with carbonate Δ 47 and the bulk ratios because Δ 47 would be reset at extreme impact temperatures, or (2) Δ 47 would have a positive correlation with the bulk ratios, reflecting gradual Δ 47 ‘resetting.’ To reconcile the SRIS result with these expectations, we conducted a series of in vacuo heating experiments at temperatures above calcite decomposition. As predicted by Rayleigh fractionation, these heating experiments generated depletions in δ 13 C and δ 18 O that increased with reaction time. Mimicking the SRIS results, these experiments also produced concomitant increases in Δ 47 . Using an adaptation of a mechanistic model for decomposition fractionation (Hayles & Killingsworth, 2022) we hypothesize that these exotic isotope trends are caused by Rayleigh fractionation and a Δ 47 kinetic isotope effect that results from the disproportionation of O to CaO and CO 2 during thermal decomposition. This high Δ 47 CO 2 subsequently exchanges with the residual CaCO 3 . This work highlights a potential pathway for identifying and quantifying CO 2 generation by impacts and builds on the relatively limited literature characterizing the behavior of carbonate clumped isotopes at very high geologic temperatures.

Multi-isotope systems↗
NASA NTRS1982

Vibration in Planetary Gear Systems with Unequal Planet Stiffnesses

An algorithm suitable for a minicomputer was developed for finding the natural frequencies and mode shapes of a planetary gear system which has unequal stiffnesses between the Sun/planet and planet/ring gear meshes. Mode shapes are represented in the form of graphical computer output that illustrates the lateral and rotational motion of the three coaxial gears and the planet gears. This procedure permits the analysis of gear trains utilizing nonuniform mesh conditions and user specified masses, stiffnesses, and boundary conditions. Numerical integration of the equations of motion for planetary gear systems indicates that this algorithm offers an efficient means of predicting operating speeds which may result in high dynamic tooth loads.

Frater, J. L.↗
NASA NTRS2022

TESS Hunt for Young and Maturing Exoplanets (THYME). VI. An 11 Myr Giant Planet Transiting a Very-low-mass Star in Lower Centaurus Crux

Mature super-Earths and sub-Neptunes are predicted to be ≃ Jovian radius when younger than 10 Myr. Thus, we expect to find 5-15 R ⊕ planets around young stars even if their older counterparts harbor none. We report the discovery and validation of TOI 1227b, a 0.85 ± 0.05 R J (9.5 R ⊕) planet transiting a very-low-mass star (0.170 ± 0.015 M ⊙) every 27.4 days. TOI 1227's kinematics and strong lithium absorption confirm that it is a member of a previously discovered subgroup in the Lower Centaurus Crux OB association, which we designate the Musca group. We derive an age of 11 ± 2 Myr for Musca, based on lithium, rotation, and the color-magnitude diagram of Musca members. The TESS data and ground-based follow-up show a deep (2.5%) transit. We use multiwavelength transit observations and radial velocities from the IGRINS spectrograph to validate the signal as planetary in nature, and we obtain an upper limit on the planet mass of ≃0.5 M J. Because such large planets are exceptionally rare around mature low-mass stars, we suggest that TOI 1227b is still contracting and will eventually turn into one of the more common <5 R ⊕ planets.

5–15 R⊕ planets↗
NASA NTRS2020

Pterodactyl: Thermal Protection System for Integrated Control Design of a Mechanically Deployed Entry Vehicle

The need for precision landing of high mass payloads on Mars and the return of sensitive samples from other planetary bodies to specific locations on Earth is driving the development of an innovative NASA technology referred to as the Deployable Entry Vehicle (DEV). A DEV has the potential to deliver an equivalent science payload with a stowed diameter 3 to 4 times smaller than a traditional rigid capsule configuration. However, the DEV design does not easily lend itself to traditional methods of directional control. The NASA Space Technology Mission Directorate (STMD)’s Pterodactyl project is currently investigating the effectiveness of three different Guidance and Control (G&C) systems – actuated flaps, Center of Gravity (CG) or mass movement, and Reaction Control System (RCS) – for use with a DEV using the Adaptable, Deployable, Entry, and Placement Technology (ADEPT) design. This paper details the Thermal Protection System (TPS) design and associated mass estimation efforts for each of the G&C systems. TPS is needed for the nose cap of the DEV and the flaps of the actuated flap control system. The development of a TPS selection, sizing, and mass estimation method designed to deal with the varying requirements for the G&C options throughout the trajectory is presented. The paper discusses the methods used to i) obtain heating environments throughout the trajectory with respect to the chosen control system and resulting geometry; ii) determine a suitable TPS material; iii) produce TPS thickness estimations; and, iv) determine the final TPS mass estimation based on TPS thickness, vehicle control system, vehicle structure, and vehicle payload.

Hays, Zane B.↗
NASA NTRS2013

Cryogenic Liquid Sample Acquisition System for Remote Space Applications

There is a need to acquire autonomously cryogenic hydrocarbon liquid sample from remote planetary locations such as the lakes of Titan for instruments such as mass spectrometers. There are several problems that had to be solved relative to collecting the right amount of cryogenic liquid sample into a warmer spacecraft, such as not allowing the sample to boil off or fractionate too early; controlling the intermediate and final pressures within carefully designed volumes; designing for various particulates and viscosities; designing to thermal, mass, and power-limited spacecraft interfaces; and reducing risk. Prior art inlets for similar instruments in spaceflight were designed primarily for atmospheric gas sampling and are not useful for this front-end application. These cryogenic liquid sample acquisition system designs for remote space applications allow for remote, autonomous, controlled sample collections of a range of challenging cryogenic sample types. The design can control the size of the sample, prevent fractionation, control pressures at various stages, and allow for various liquid sample levels. It is capable of collecting repeated samples autonomously in difficult lowtemperature conditions often found in planetary missions. It is capable of collecting samples for use by instruments from difficult sample types such as cryogenic hydrocarbon (methane, ethane, and propane) mixtures with solid particulates such as found on Titan. The design with a warm actuated valve is compatible with various spacecraft thermal and structural interfaces. The design uses controlled volumes, heaters, inlet and vent tubes, a cryogenic valve seat, inlet screens, temperature and cryogenic liquid sensors, seals, and vents to accomplish its task.

Mahaffy, Paul↗