EXPERIMENTAL DETERMINATION OF THE HYDROGEN RECOMBINATION CONSTANT
Investigation of hydrogen recombination-rate constant in hydrogen-propelled arc-jet engine
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Investigation of hydrogen recombination-rate constant in hydrogen-propelled arc-jet engine
This paper for the first time reports the (200) oriented growth of hexagonal Aluminum nitride crystals during synthesis of aluminum nanoparticles in dc transferred arc thermal plasma reactor by gas phase condensation in nitrogen plasma. The structural and morphological study of as synthesized AlN crystal and aluminium nanoparticles was done by using the x-ray diffraction method, scanning electron microscopy and transmission electron microscopy.
The Solar Array Module Plasma Interactions Experiment (SAMPIE) is a NASA shuttle space flight experiment scheduled for launch in early 1994. The SAMPIE experiment will investigate plasma interactions of high voltage space power systems in low earth orbit. Solar cell modules, representing several technologies, will be biased to high voltages to characterize both arcing and plasma current collection. Other solar modules, specially modified in accordance with current theories of arcing and breakdown, will demonstrate the possibility of arc suppression. Finally, several test modules will be included to study the basic nature of these interactions. The science and technology goals for the project are defined in the Technical Requirements Document (TRD) which is presented here.
Fe-Ni alloy nanoparticles are of great interest because of diverse practical applications in the fields such as magnetic fluids, high density recording media, catalysis and medicine. We report the synthesis of Fe-Ni nanoparticles via thermal plasma route. Thermal plasma assisted synthesis is a high temperature process and gives high yields of production. Here, we have used direct arc thermal plasma plume of 6kw as a source of energy at operating pressure 500 Torr. The mixture of Fe-Ni powder in required proportion (Fe{sub 1−x}Ni{sub x}; x=0.30, 0.32, 0.34, 0.36, 0.38 and 0.40) was made to evaporate simultaneously from the graphite anode in thermal plasma reactor to form Fe-Ni bimetallic nanoparticles. The as synthesized particles were characterized by X-Ray Diffraction (XRD), Thermo-Gravimetric Analysis/Differential Scanning Calorimtry (TGA/DSC)
The Solar Array Module Plasma Interactions Experiment (SAMPIE) is a shuttle based flight experiment scheduled for launch in early 1994. SAMPIE will investigate plasma interactions of high voltage space power systems in low earth orbit. Solar cell modules, representing several technologies, will be biased through a series of high voltages to characterize both arcing and plasma current collection. Other solar modules, specially modified in accordance with current theories of arcing and breakdown, will demonstrate the possibility of arc suppression. Finally, several test modules will be included to study the basic nature of these interactions. The science and technology goals for the project are defined in the Technical Requirements Document (TRD) which is presented here in its final form. The experiment is being developed at NASA LeRC in Cleveland, Ohio, and is sponsored by the NASA Office of Aeronautics and Space Technology (OAST).
Intermetallic coatings (iron aluminide and nickel aluminide) were prepared by a novel reaction process. In the process, the aluminide coating is formed by an in-situ reaction between the aluminum powder fed through a plasma transferred arc (PTA) torch and the metal substrate (steel or Ni-base alloy). Subjected to the high temperature within an argon plasma zone, aluminum powder and the surface of the substrate melt and react to form the aluminide coatings. The prepared coatings were found to be aluminide phases that are porosity-free and metallurgically bonded to the substrate. The coatings also exhibit excellent high-temperature corrosion resistance under the conditions which simulate the steam-side and fire-side environments in coal-fired boilers. It is expected that the principle demonstrated in this process can be applied to the preparation of other intermetallic and alloy coatings.
Results of investigation of the angular distribution and mass-to-charge fractions of the ion flow generated in a pulsed vacuum arc with lanthanum hexaboride and boron carbide cathodes are presented. It is shown that the discharge with such cathodes provides efficient generation of the plasma with a high fraction of boron ions with charge states from 1+ to 3+ whose total fraction is determined by the fraction of the boron atoms in the cathode material. The angular distributions of ions in the plasma flow depend on the relationship between the masses of components of cathode materials: in the case of lanthanum hexaboride cathode, the distribution of boron ions is wider than that of lanthanum ions, and in the case of boron carbide cathode, the boron and carbon ion distributions are practically identical.
A pulsed metallic-plasma generator is described which utilizes a vacuum arc as the plasma source. The arc is initiated on the surface of a consumable cathode which can be any electrically conductive material. Ignition is accomplished by using a current pulse to vaporize a portion of a conductive film on the surface of an insulator separating the cathode from the ignition electrode. The film is regenerated during the ensuing arc. Over 100 million ignition cycles have been accomplished by using four 0.125-in. diameter zinc cathodes operating in parallel and high-density aluminum-oxide insulators. Among the applications being investigated for the generator are metal deposition, vacuum pumping, electric propulsion, and high-power dc arc interruption.
Short-pulse, high-current discharges in vacuum were investigated with the goal to maximize the ion charge state number. In a direct extension of previous work [Appl. Phys. Lett. 92, 041502 (2008)], the role of pulse length, rate of current rise, and current amplitude was studied. For all experimental conditions, the usable (extractable) mean ion charge state could not be pushed beyond 7+. Instead, a maximum of the mean ion charge state (about 6+ to 7+ for most cathode materials) was found for a power of 2-3 MW dissipated in the discharge gap. The maximum is the result of two opposing processes that occur when the power is increased: (i) the formation of higher ion charge states, and (ii) a greater production of neutrals (both metal and non-metal), which reduces the charge state via charge exchange collisions.
Low power magnetoplasmadynamic arc thrustor performance
Herein, an FeCrBSi coating was fabricated via plasma spray on AISI1045 steel, and subsequently, a gas tungsten arc welding (GTA) process was employed to remelt the coating. The microstructure, microhardness, fracture toughness and surface roughness of the coating before and after remelting were investigated, as well as the wear resistance was tested by a UMT-3-type sliding wear apparatus. The results showed that, upon remelting, most defects in the as-sprayed coating were effectively eliminated, the surface roughness decreased by 43%, and the coating–substrate interface bonding changed from mechanical to metallurgical. The phase composition of the as-sprayed coating was primarily α-Fe and a small amount of hard Fe{sub 3}B phase, while the remelted coating consisted of α-Fe and (Fe,Cr){sub 23}C{sub 6} and a small quantity of CrB. In addition, remelting the coating was found to induce a 287.6% increase in the fracture toughness, a 33.4% increase in the average microhardness, and a 47.5% decrease in the wear volume, while the failure mechanism changed from abrasive wear to fatigue wear upon remelting. Therefore, GTA remelting of plasma-sprayed coating was found to be a feasible method to obtain a coating with good wear resistance.
Plasmas are everywhere and relevant to everyone. We bath in a sea of photons, quanta of electromagnetic radiation, whose sources (natural and artificial) are dominantly plasma-based (stars, fluorescent lights, arc lamps.. .). Plasma surface modification and materials processing contribute increasingly to a wide array of modern artifacts; e.g., tiny plasma discharge elements constitute the pixel arrays of plasma televisions and plasma processing provides roughly one-third of the steps to produce semiconductors, essential elements of our networking and computing infrastructure. Finally, plasmas are central to many cutting edge technologies with high potential (compact high-energy particle accelerators; plasma-enhanced waste processors; high tolerance surface preparation and multifuel preprocessors for transportation systems; fusion for energy production).
This manuscript presents and discusses the very first successful application of the Femtosecond Laser Electronic Excitation Tagging (FLEET) velocimetry technique in an arc-jet flow. Specifically, one-dimensional, quantitative, FLEET velocimetry data were obtained in the effort to characterize the 1.6 MW ONR-UTA arc-jet plasma wind tunnel, Leste, housed at the Aerodynamics Research Center of the University of Texas at Arlington. While the FLEET technique has been used in other types of high-speed wind tunnel facilities, application to flows with high background radiation, such as arc-jets, has never been demonstrated before this work. The high background emissions posed concerns on the feasibility of performing FLEET velocimetry measurements. However, this work demonstrates how these concerns were addressed and presents the first successful application of the FLEET technique in arc-jet flows. The FLEET emissions in the arc-jet plume were successfully imaged, and a significant spatio-temporal variation in the tag’s displacement was observed. For the selected operational condition in this study, the average measured gas velocity in the arc-jet plume was 1.78 km/s.
Vortex stabilized arc, pressure arc facility, spectral irradiance measurements of light sources, and ultrahigh vacuum system in support of solar simulation testing
Vortex arc studies, solar flux and spectral measurements, spacecraft coatings, solar simulation studies, and solar cell radiation effects testing
Here we investigate here the effects of transient (cyclic) arc-jet plasma and laser heating on fracture behavior of W-foam and solid tungsten. The two key parameters that control the foam thermomechanical response are its density and mean cell size expressed in Pores Per Inch (PPI). Tungsten foam samples were fabricated with Chemical Vapor Deposition (CVD) with variety of PPI and relative density. These were tested under two types of qualitatively different conditions: (1) high-enthalpy arc-jet, and (2) high-power cyclic laser heating. None of the foam samples showed macroscopic through-thickness cracks. However, distributed micro-cracks were observed on ligaments and their triple junctions. Under the same loading conditions, W-foam and solid tungsten showed similar crack network pattern and characteristic length-scale. However, Crack Opening Displacement (COD) was twice as large in solid W as compared to W-foam. Foam samples that have been previously exposed to a low-pressure helium plasma showed significant changes in their surface forming nano-texture fuzz which was removed by subsequent testing in the arc-jet. Extensive fracture and re-crystallization were observed in the thin solid W disk that was fully-constrained from expansion. Thicker and fully-constrained solid W disks did not display recrystallization, grain growth, and extensive cracking. However, thicker disks that were free to expand showed some recrystallization and extensive through-thickness cracks due to less effective cooling and thus higher temperatures. Laser beam testing showed no visible damage formation at 0.19 GW/m 2 and 0.38 GW/m 2 for both low-density (23%) and high-density (43%) foams at low pulses (100-1000). Micro-cracks were observed after 10,000 pulses at 0.19 GW/m 2 in both foams, and in low-density foam after 100,000 at 0.38 GW/m 2 . The nature of thermomechanical damage in W-foam exposed to extreme power (GW/m 2 ) short-duration laser pulses was found to be qualitatively similar to that of high power (MW/m 2 ) long-duration arc-jet.
A non-thermal gliding arc discharge was generated at atmospheric pressure in an air flow. The dynamics of the plasma column and tracer particles were recorded using two synchronized high-speed cameras. Whereas the data analysis for such systems has previously been performed in 2D (analyzing the single camera image), we provide here a 3D data analysis that includes 3D reconstructions of the plasma column and 3D particle tracking velocimetry based on discrete tomography methods. The 3D analysis, in particular, the determination of the 3D slip velocity between the plasma column and the gas flow, gives more realistic insight into the convection cooling process. Additionally, with the determination of the 3D slip velocity and the 3D length of the plasma column, we give more accurate estimates for the drag force, the electric field strength, the power per unit length, and the radius of the conducting zone of the plasma column.
Aurorae which appear in the polar cap are called transpolar arcs, polar cap arcs, sun-aligned arcs, or occasionally Theta-aurora because of its spatial distribution resembling Greek character 'Theta.' Morphology, IMF (Interplanetary Magnetic Field) relationship, and ionospheric convection patterns were studied in quest of mechanisms of transpolar arcs. Four events were analyzed: 1999/Jan/22/19:00 - 23/01:30 (1 event: a) 1999/Jan/24/06:00 - 10:00 (1 event: b) 1999/Feb/1 1/20:00 - 12/02:00 (2 events: c, d), with data set of ExB drift velocity data obtained by electric field measurements of ASTRID-2 and FAST, DMSP ion driftmeter data, and line-of-sight velocity data of SuperDARN. POLAR-UVI image data were used for spatial and temporal variations of transpolar arcs and ACE data set were used for investigation of IMF relationship. IMF-Bz was strongly positive (Bz from +8nT to +20 nT) during periods of all four transpolar arcs. In events (a),(b),(c), transpolar arcs appeared immediately after the direction of IMF turned northward, though IMF was fluctuating in event (b). A sudden increase of IMF-By, from +3nT to +18nT, was observed in event (d). Two different types of transpolar arc development were observed in POLAR-UVI: one which begins as a split from dawn or dusk sector of auroral oval and shifts poleward in event (a),(c),(d), and another which is initially a patch of auroral oval disturbed by substorm but develops as a transpolar arc, forming a growing finger-like shape from midnight sector (event b). Sunward flow, associated with positive IMF-Bz, were observed within newly-created polar caps in event (a),(c),(d). Not clear ionospheric convection pattern was seen across the polar cap arc in event (b) die to limitation of data set. In event (c), O+ with energy more than 1 keV were observed by FAST within a transpolar arc, suggesting that their origin be from plasma sheet. Transpolar arcs are thought to be projection of plasma sheet bifurcation into lobe regime. There can be several ways of development of transpolar arcs and two different patterns were observed through this work.