Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROPERTY RIGHTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Submilliarcsecond VLBI observations of the close pair GC 1342 + 662 and GC 1342 + 663

Differential VLBI was simultaneously performed on the source pair GC 1342 + 662 and GC 1342 + 663 (4.4-arcminute separation) using S-band on the Goldstone/Madrid baseline. These measurements were acquired on two separate observing sessions: 30 December 1982 and 14 May 1983. The change in separation of GC 1342 + 662 relative to GC 1342 + 663 between the two epochs was 0.03 + or - 0.08 milliarcsecond. The differences of the relative position measurements between epochs of GC 1342 + 662 relative to GC 1342 + 663 were -0.29 + or - 0.05 milliarcsecond in right ascension and 0.14 + or 0.09 milliarcsecond in declination. These measurements demonstrate submilliarcsecond accuracy and repeatability. The discrepancies outside of the formal uncertainties could be attributed to the intrinsic properties of the sources such as structure and to a lesser probability, proper motion. These discrepancies could also be attributed to excursions in UT1-UTC of about four times the quoted BIH uncertainty.

Morabito, D. D.↗

The Balmer-dominated northeast limb of the Cygnus loop supernova remnant

We present a comprehensive investigation of the Balmar-dominated northeast limb of the Cygnus Loop supernova remnant. Data presented include H alpha (O III), and X-ray images, UV and visible spectrophotometry, and high-resolution spectroscophy. The two relatively bright Balmer-dominated filaments visible on the POSS prints are seen to be part of a very smooth and regular complex of filaments. These filaments mark the current location of the blast wave and are seen to bound the sharply limb-brightened X-ray emission, including the previously reported X-ray, 'halo.' The (O III)/h beta ratio throughout the region is approximately 0.1, except for regions in which the shock is undergoing a transition from nonradiative to incomplete radiative to incomplete radiative conditions. At these locations (O III) emission from the cooling region is quite strong, while collisionally excited Balmer-line emission can be weak because of photoionization of the preshock medium by UV from the nascent cooling region. As a result (O III)/H beta is greater than 100 in some locations. The nonradiative/radiative transition is best studied along the length of the northwestern of the two brightest filaments, where the shock velocity and swept-up column go from approximately 180 km/s and 10(exp 17)/sq cm at one end to approximately 140 km/s and 8 x 10(exp 17)/cm at the other. There are also a number of locations of such incomplete radiative emission where the shock has recently encountered denser regions with characteristic sizes of approximately 10(exp 18) cm. There is a considerable amount of evidence that the shock has decelerated from approximately 400 km/s to less than 200 km/s in the last 1000 yr. We interpret this as the result of the blast wave hitting the wall of a cavity which surround the supernova precursor and succeed in matching a wide range of data with a reflected shock model in which the density ofthe cavity wall is approximately 1.2/cu cm and the density in the interior of the cavity is about 0.09/cu cm. This analysis supports previous suggestions that the Cygnus Loop was a cavity explosion. We opredict that the X-ray shell will continue to brighten for the next 1000 years or so, during which time the shock front will become radiative throughout the northeast region. The similarity of the time scales for post-shock cooling, shock deceleration, and the 1ressure evolution of the region violates assumptions of steady flow, and greatly complicated interpretation of shock specptra in the region. This may be a common and important effect in many supernova remnants. High-resolutoin spectroscopy of the H alpha line profile shows that the broad component is surprisingly narrow (approximately 130 km/s). Consistency between this line width and the shock velocity inferred from spectrophotometry requires either rapid postshock equilibration of T(sub i) and T(sub e), or that the shock front has declerated from 180 km/s to 150 km/s in the last approximately 200 yr. While we cannot unambiguously distinquish between these models, the required deceleration is consistent with extrapolation of the shock decleration rate inferred over the last 1000 years. The width of the narrow component of the h alpha line profile is approximately 3 km/s, which indicates that the preshock medium has been heated to approximately 25,000 K by a shock precursor. The most promising types of precursor are heating either by fast neutrals which overtake the shock or by cosmic rays. In the latter case the observed properties of the precursor constrain the cosmic-ray diffusion coefficient to be between about 10(exp 23) sq cm/s. The characteristics of the precursor seem to be about right to explain the presence of weak (S II) and (N II) emission previously reported by Fesen & Itoh (1985).

Hester, J. Jeff↗

Ternary europium mesoporous polymeric hybrid materials Eu({beta}-diketonate){sub 3}pvpd-SBA-15(16): host-guest construction, characterization and photoluminescence

Novel organic-inorganic mesoporous luminescent polymeric hybrid materials containing europium(III) complexes incorporated to mesoporous silica SBA-15/SBA-16 have been prepared by simple physical doping (impregnation) methods, followed by the addition polymerization reaction of the monomer 4-vinylpyridine (vpd) extending along the mesoporous channels. The precursor europium(III) complexes are synthesized by {beta}-diketonate ({beta}-diketonate=2-thenoyltrifluoroacetonate (tta), hexafluoroacetylacetonate (hfac), trifluoroacetylacetonate (taa)) and monomer 4-vinylpyridine (vpd) coordinated to Eu{sup 3+}, and SBA-15/SBA-16 are obtained via a sol-gel process. After the physical doping and the polymerization reaction, the final ternary materials Eu({beta}-diketonate){sub 3}pvpd-SBA-15/Eu({beta}-diketonate){sub 3}pvpd-SBA-16 ({beta}-diketonate=tta, hfac, taa) are received. The physical properties and espeically the photoluminescence of these hybrids are characterized, and the XRD and BET results reveal that all of these hybrid materials have uniformity in the mesostructure. The detailed luminescence investigation on all the materials show that Eu(tta){sub 3}pvpd-SBA-16 have the highest luminescence intensity and the materials with taa ligands have longer lifetimes. - Grapical abstract: Luminescent mesoporous polymeric hybrid materials containing europium complexes hydrogen bonding to silica SBA-15/SBA-16 followed by the addition polymerization reaction of 4-vinylpyridine (vpd) extending along the mesoporous channels. Highlights: Black-Right-Pointing-Pointer Functional mesoporous with simple impregnation method. Black-Right-Pointing-Pointer New lanthanide mesoporous hybrids with polymer ligands. Black-Right-Pointing-Pointer Luminescence in visible region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-temperature order-disorder transitions in the skutterudites CoGe{sub 1.5}Q{sub 1.5} (Q=S, Te)

The temperature dependence of anion ordering in the skutterudites CoGe{sub 1.5}Q{sub 1.5} (Q=S, Te) has been investigated by powder neutron diffraction. Both materials adopt a rhombohedral structure at room temperature (space group R3{sup Macron} ) in which the anions are ordered trans to each other within Ge{sub 2}Q{sub 2} rings. In CoGe{sub 1.5}S{sub 1.5}, anion ordering is preserved up to the melting point of 950 Degree-Sign C. However, rhombohedral CoGe{sub 1.5}Te{sub 1.5} undergoes a phase transition at 610 Degree-Sign C involving a change to cubic symmetry (space group Im3{sup Macron }). In the high-temperature modification, there is a statistical distribution of anions over the available sites within the Ge{sub 2}Te{sub 2} rings. The structural transition involves a reduction in the degree of distortion of the Ge{sub 2}Te{sub 2} rings which progressively transform from a rhombus to a rectangular shape. The effect of this transition on the thermoelectric properties has been investigated. - Graphical abstract: Powder neutron diffraction reveals that the skutterudite CoGe{sub 1.5}Te{sub 1.5} undergoes a phase transition at 610 Degree-Sign C, involving the disordering of the anions within the Ge{sub 2}Te{sub 2} rings. Highlights: Black-Right-Pointing-Pointer CoGe{sub 1.5}S{sub 1.5} retains an ordered skutterudite structure up to 950 Degree-Sign C. Black-Right-Pointing-Pointer CoGe{sub 1.5}Te{sub 1.5} undergoes an order-disorder phase transition at 610 Degree-Sign C. Black-Right-Pointing-Pointer Below 610 Degree-Sign C, anions are arranged trans to each other within Ge{sub 2}Te{sub 2} rings. Black-Right-Pointing-Pointer Above 610 Degree-Sign C, anions are statistically distributed within the Ge{sub 2}Te{sub 2} rings. Black-Right-Pointing-Pointer The effect of the phase transition on the thermal conductivity is discussed.

36 MATERIALS SCIENCE↗

Bimetallic iron and cobalt incorporated MFI/MCM-41 composite and its catalytic properties

Graphical abstract: The formation of FeCo-MFI/MCM-41 composite is based on two steps, the first step of synthesizing the MFI-type proto-zeolite unites under hydrothermal conditions. The second step of assembling these zeolite fragment together new silica and heteroatom source on the CTAB surfactant micelle to synthesize the mesoporous product with hexagonal structure. Highlights: Black-Right-Pointing-Pointer Bimetallic iron and cobalt incorporated MFI/MCM-41 composite was prepared using templating method. Black-Right-Pointing-Pointer FeCo-MFI/MCM-41 composite simultaneously possessed two kinds of meso- and micro-porous structures. Black-Right-Pointing-Pointer Iron and cobalt ions incorporated into the silica framework with tetrahedral coordination. -- Abstract: The MFI/MCM-41 composite material with bimetallic Fe and Co incorporation was prepared using templating method via a two-step hydrothermal crystallization procedure. The obtained products were characterized by a series of techniques including powder X-ray diffraction, N{sub 2} sorption, transmission electron microscopy, scanning electron microscope, H{sub 2} temperature programmed reduction, thermal analyses, and X-ray absorption fine structure spectroscopy of the Fe and Co K-edge. The catalytic properties of the products were investigated by residual oil hydrocracking reactions. Characterization results showed that the FeCo-MFI/MCM-41 composite simultaneously possessed two kinds of stable meso- and micro-porous structures. Iron and cobalt ions were incorporated into the silicon framework, which was confirmed by H{sub 2} temperature programmed reduction and X-ray absorption fine structure spectroscopy. This composite presented excellent activities in hydrocracking of residual oil, which was superior to the pure materials of silicate-1/MCM-41.

36 MATERIALS SCIENCE↗

Composites of Bi{sub 2-x}Sb{sub x}Te{sub 3} nanocrystals and fullerene molecules for thermoelectricity

New nanocomposite thermoelectric material composed from nanocrystallites of Bi-Sb-Te alloys covered by C{sub 60} molecules has been synthesized and studied. An increase of fullerene content leads to the growth of hole concentration in p-type materials and reduction of electron concentration in n-type materials. The fullerene molecules provide additional scattering of phonons reducing lattice heat conductivity. Reduction of heat conductivity exceeds the reduction of electrical conductivity for fullerene content less than 0.5 volume % and essential enhances the thermoelectric figure of merit. The maximum value of thermoelectric figure of merit equals to 1.17 at 450 K was observed in Bi{sub 0.5}Sb{sub 1.5}Te{sub 3} composite containing 0.5 volume % C{sub 60} molecules. The experimental results were analyzed in a frame of the model based on the Boltzmann equation. The analysis considers light and heavy electrons and holes and accounts the intervalley scattering of charge carriers. The calculations of the kinetic coefficients shows that the improvement of the thermoelectric figure of merit originates from the reduction of the lattice heat conductivity caused by fullerene molecules. The dependencies of the thermoelectric figure of merit on the acceptor concentration were calculated. - Graphical abstract: New nanocomposite thermoelectric material composed from nanocrystallites of Bi-Sb-Te alloys covered by C{sub 60} molecules has been synthesized and studied. An increase of fullerene content leads to the growth of hole concentration in p-type materials and reduction of electron concentration in n-type materials. The fullerene molecules provide additional scattering of phonons reducing lattice heat conductivity and enhances the thermoelectric figure of merit. The maximum value of thermoelectric figure of merit equal to 1.17 at 450 K was observed in Bi{sub 0.5}Sb{sub 1.5}Te{sub 3} composite containing 0.5 volume % fullerene molecules. Simulations of thermoelectric properties were made in frame of four bands, 12 valleys Boltzmann equation approach. Simulated and measured temperature dependencies of thermoelectric properties were compared to get unknown model parameters. These parameters were used to calculate dependencies of thermoelectric properties on acceptor concentration. Calculated dependencies of thermoelectric figure of merit on acceptor concentration are presented in the figure for p-type composites with 0 vol.% C{sub 60} (solid lines) and 0.5 vol.% C{sub 60} (dashed lines). Highlights: Black-Right-Pointing-Pointer C{sub 60} doping of Bi-Sb-Te has acceptor effect. Black-Right-Pointing-Pointer Fullerene molecules prevent recrystallization in Bi-Sb-Te nanocomposites. Black-Right-Pointing-Pointer C{sub 60} in Bi-Sb-Te nanocomposites essentially reduces lattice thermal conductivity. Black-Right-Pointing-Pointer Thermoelectric figure of merit in nanocomposite C{sub 60}-Bi-Sb-Te enhanced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The American Foreign Exchange Option in Time-Dependent One-Dimensional Diffusion Model for Exchange Rate

The classical Garman-Kohlhagen model for the currency exchange assumes that the domestic and foreign currency risk-free interest rates are constant and the exchange rate follows a log-normal diffusion process.In this paper we consider the general case, when exchange rate evolves according to arbitrary one-dimensional diffusion process with local volatility that is the function of time and the current exchange rate and where the domestic and foreign currency risk-free interest rates may be arbitrary continuous functions of time. First non-trivial problem we encounter in time-dependent case is the continuity in time argument of the value function of the American put option and the regularity properties of the optimal exercise boundary. We establish these properties based on systematic use of the monotonicity in volatility for the value functions of the American as well as European options with convex payoffs together with the Dynamic Programming Principle and we obtain certain type of comparison result for the value functions and corresponding exercise boundaries for the American puts with different strikes, maturities and volatilities.Starting from the latter fact that the optimal exercise boundary curve is left continuous with right-hand limits we give a mathematically rigorous and transparent derivation of the significant early exercise premium representation for the value function of the American foreign exchange put option as the sum of the European put option value function and the early exercise premium.The proof essentially relies on the particular property of the stochastic integral with respect to arbitrary continuous semimartingale over the predictable subsets of its zeros. We derive from the latter the nonlinear integral equation for the optimal exercise boundary which can be studied by numerical methods.

97 MATHEMATICS AND COMPUTING↗

Microwave assisted hydrothermal synthesis of Ag/AgCl/WO{sub 3} photocatalyst and its photocatalytic activity under simulated solar light

Simulated solar light responsive Ag/AgCl/WO{sub 3} composite photocatalyst was synthesized by microwave assisted hydrothermal process. The synthesized powders were characterized by X-Ray Diffraction (XRD) spectroscopy, X-Ray Photoelectron Spectroscopy (XPS), Transmission Electron Microscopy (TEM), Diffuse Reflectance Spectroscopy (UV-Vis DRS), and BET surface area analyzer to investigate the crystal structure, morphology, chemical composition, optical properties and surface area of the composite photocatalyst. This photocatalyst exhibited higher photocatalytic activity for the degradation of rhodamine B under simulated solar light irradiation. Dye degradation efficiency of composite photocatalyst was found to be increased significantly as compared to that of the commercial WO{sub 3} nanopowder. Increase in photocatalytic activity of the photocatalyst was explained on the basis of surface plasmon resonance (SPR) effect caused by the silver nanoparticles present in the composite photocatalyst. Highlights: Black-Right-Pointing-Pointer Successful synthesis of Ag/AgCl/WO{sub 3} nanocomposite. Black-Right-Pointing-Pointer Photocatalytic experiment was performed under simulated solar light. Black-Right-Pointing-Pointer Nanocomposite photocatalyst was very active as compared to WO{sub 3} commercial powder. Black-Right-Pointing-Pointer SPR effect due to Ag nanoparticles enhanced the photocatalytic activity.

36 MATERIALS SCIENCE↗

Temporary Arterial Embolization of Liver Parenchyma with Degradable Starch Microspheres (EmboCept{sup ®}S) in a Swine Model

BackgroundThis study aimed to evaluate the embolic properties, time to reperfusion, and histologic changes in temporary embolization of liver tissue with degradable starch microspheres (DSM) in a swine model.MethodsIn four adult minipigs, DSMs were injected into the right or left hepatic artery on the lobar level until complete stasis of the blood flow was detectable angiographically. The time required to complete angiographically determined reperfusion was noted. The animals were killed 3 h after complete reperfusion, and samples were taken from the liver. Histologic examinations of the embolized liver parenchyma and untreated tissue were performed.ResultsHepatic arterial embolization using DSMs was technically successful in all cases, with complete blood flow stasis shown by control angiography. A single vial of DSMs (450 mg/7.5 ml) was sufficient to embolize a whole liver lobe in all cases. Angiography showed complete reconstitution of hepatic arterial perfusion after a mean time to reperfusion of 32 ± 6.1 min (range, 26–39 min). Hematoxylin and eosin staining showed no histologically detectable differences between untreated tissue and parenchyma embolized with DSMs except for mild sinusoidal congestion in one case. Indirect in situ DNA nick end labeling staining (TUNEL) showed only single positive hepatocytes, indicating apoptosis.ConclusionTemporary embolization of the hepatic artery using DSMs is feasible with complete reperfusion after 30 min in pigs. Even after complete arterial blood flow stasis, no extensive tissue damage to the embolized liver parenchyma was observed at histologic examinations in this short-term study.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Controllable synthesis of ZnO nanograss with different morphologies and enhanced performance in dye-sensitized solar cells

A series of ZnO nanograss films grown on fluorine-doped tin oxide coated glass substrates were synthesized via hydrothermal method by using polyethyleneimine (PEI) as adjusting agent. The films were characterized by field emission scanning electron microscope (FE-SEM) and X-ray diffraction (XRD). It was found that the PEI not only affected the aspect ratios of ZnO nanograss but also changed the geometrical shape of ZnO nanograss. A possible mechanism based on PEI adsorbed on the non-polar facets of ZnO that governed the growth rate of different directions were proposed to elucidate the effect of PEI on morphology of ZnO. The ZnO nanograss films were applied to dye-sensitized solar cells (DSSCs). The results showed that the photocurrent density significantly enhanced, and the power conversion efficiency increased by 55% based on ZnO nanograss synthesized in a growth solution containing 7 mmol/L PEI, resulting from the dye loading properties related to the different morphologies. - Graphical abstract: Effect of PEI on ZnO nanograss: controlling the aspect ratio and morphology of ZnO and enhancing their photovoltaic performance. Highlights: Black-Right-Pointing-Pointer ZnO nanograss with different aspect ratios were synthesized by adjusting PEI content. Black-Right-Pointing-Pointer PEI affects both on the aspect ratios and geometrical shapes of ZnO nanograss. Black-Right-Pointing-Pointer ZnO nanograss with high aspect ratio and needle-like tip was advantageous for improved photovoltaic conversion performance.

36 MATERIALS SCIENCE↗

Crystal growth and characterization of Tm doped mixed rare-earth aluminum perovskite

Highlights: Black-Right-Pointing-Pointer (Lu{sub x}Gd{sub y}Y{sub 0.99-x-y}Tm{sub 0.01})AP single crystals were grown by the {mu}-PD method. Black-Right-Pointing-Pointer The grown crystals were single phase with perovskite structure (Pbnm). Significant segregation of Lu and Gd was detected in the growth direction. Black-Right-Pointing-Pointer Some absorption bands due to Tm{sup 3+}, Gd{sup 3+} and color centers were exhibited. Black-Right-Pointing-Pointer Radioluminescence spectra showed several emission peaks ascribed to Tm{sup 3+} and Gd{sup 3+}. -- Abstract: In this work, we present results of structural characterization and optical properties including radio luminescence of (Lu{sub x}Gd{sub y}Y{sub 0.99-x-y}Tm{sub 0.01})AP single crystal scintillators for (x, y) = (0.30, 0.19), (0, 0.19) and (0, 0) grown by the micro-pulling-down ({mu}-PD) method. The grown crystals were single phase materials with perovskite structure (Pbnm) as confirmed by XRD and had a good crystallinity. The distribution of the crystal constituents in growth direction was evaluated, and significant segregation of Lu and Gd was detected in (Lu{sub 0.30}Gd{sub 0.19}Y{sub 0.50}Tm{sub 0.01})AP sample. The crystals demonstrated 70% transmittance in visible wavelength range and some absorption bands due to Tm{sup 3+}, Gd{sup 3+} and color centers were exhibited in 190-900 nm. The radioluminescence measurement under X-ray irradiation demonstrated several emission peaks ascribed to 4f-4f transitions of Tm{sup 3+} and Gd{sup 3+}. The ratio of emission intensity in longer wavelength range was increased when Y was replaced by Lu or Gd.

36 MATERIALS SCIENCE↗

Prospects for nanoparticle-based permanent magnets

Magnetic nanoparticles smaller than similar to 15 nm in diameter and with high magnetocrystalline anisotropies K-1 >= 1 MJ m(-3) can be used as building blocks for next-generation permanent magnets. Advances in processing steps are discussed, such as self-assembly, alignment of the easy axes and appropriate nanostructuring that will enable the fabrication of densely packed nanopartide assemblies with improved permanent-magnet properties. This study also proposes an idealized nanocomposite structure for nanoparticle-based future permanent magnets with enhanced energy products. (C) 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Balamurugan, B↗

Flight motor set 360T004 (STS-30R). Volume 1: System overview

The fourth NASA space shuttle flight incorporating redesigned solid rocket motors began on 4 May 1989. The flight motors were designated 360Q004A (left-hand) and 360H004B (right-hand); the mission was designated STS-30R. Overall engine performance was excellent. The low sample rate data that was available showed exceptional propulsion performance. All ballistic and mass property parameters closely matched the predicted values and were well within the required contract end item specification levels that could be assessed. No strain, vibration, or aft skirt heating environments could be addressed due to developmental flight instrumentation deletion. Infrared readings from the shuttle thermal imager were considered very good when compared with ground environment instrumentation readings taken during both the aborted and the actual countdowns. However, hand-held infrared gun reading/ground environment instrumentation comparisons were considered poor during both countdowns, with the exception of the T - 3 hour timeframe during the actual launch. Postflight inspection again verified superior performance of the insulation, phenolics, metal parts, and seals. All combustion gas was contained by the insulation in the field and case-to-nozzle joints. Inadequate parachute performance on the left-hand booster caused high splashdown loads, which resulted in a displaced nozzle and factory joint weatherseal unbond anomalies. Recommendations were made concerning improved thermal modeling and instruments. The rationale for these recommendations, the dispositions of all anomalies, and complete result details are given.

Ricks, Glenn A.↗

Consistent Fluid Property Evaluation in RELAP5-3D

Previous investigations have developed and tested a methodology to improve the consistency between used to determine the fluid property derivatives used in the numerical solution scheme and the solution scheme itself. Within a bounding rectangle of the fluid property table for a fluid state point, linear interpolants for both fluid property values and their derivatives are calculated. A weighted average between these interpolants the analytical approximations of the fluid properties and derivatives is formed with a weighting factor between 0.0 and 1.0. This average has shown potential to reduce mass error relating to the fluid properties in RELAP5-3D. This linear interpolation and weighted averaging methodology has been implemented in RELAP5-3D with two additional options that adjust the weighting factor in the average according to the location within the bounding rectangle. The first calculates the weighting factor based only on the position between the left and right internal energy endpoints. The second also factors the position between the upper and lower pressure grid points into the calculation of the weighting factor. The new coding passes verification testing and expanded testing of the various options. Graphs are presented from three kinds of test cases, a two volume basic model, Edward’s O’Brien blowdown, and typical PWR. Some trends of the effect of crossing fluid property table pressure and internal energy grid line are identified and discussed for the simple and Edwards test cases. Preliminary results show that it the consistent fluid methodology can reduce mass error in simple cases, but in more complex input models, there is no clear best.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Directed self-assembly of chiral liquid crystals into biomimetic bouligand structures in thin film

The Bouligand structure, renowned for its helicoidal arrangement and enhanced mechanical properties, has attracted significant research interest for its ability to impart enhanced strength to intrinsically soft materials. Biomimetic approaches have centered on fibrous structures in bulk materials, but translating this architecture into thin-film regime for miniaturized-wearable devices with programmable functions remains challenging. Here, we direct the self-assembly of cholesteric liquid crystals (CLCs) into hierarchical helical structures using chemically patterned surfaces. Alternating surface anchoring regions align uniform lying-down helices at the nanoscale, guiding a secondary microscale helical structure exhibiting both left- and right-handed twists. This mimetic Bouligand structure in CLCs enables optical modulation under applied field and strain with enhanced mechanical response. Simulations reveal the structural evolution from initial Bouligand configuration in LC layers to alternating twist helices. This research provides a basis for designing and manufacturing miniaturized or wearable devices with nanometer-scale precision in regulating electro-optical and mechanical properties. Bouligand structures, which offer strength in natural materials, are of interest but difficult to obtain. Here, the authors report the development of such structures by directed self-assembly of cholesteric single crystals into hierarchical helical structures, with the secondary structure having right and left-handed twists.

Bouligand structure↗

Synthesis and thermoelectric properties of the novel A-site deficient Zn{sub 0.5}Rh{sub 2}O{sub 4} compound

A novel thermoelectric material, A-site-deficient spinel Zn{sub 0.5}Rh{sub 2}O{sub 4}, was prepared by subtracting Li ions from Li{sub 0.5}Zn{sub 0.5}Rh{sub 2}O{sub 4} immersed in a K{sub 2}S{sub 2}O{sub 8} aqueous solution. The electric conductivity ({sigma}) increased 6-fold after extracting Li ({sigma}=8.8 S/cm (Li{sub 0.5}Zn{sub 0.5}Rh{sub 2}O{sub 4}), 50 S/cm (Zn{sub 0.5}Rh{sub 2}O{sub 4}) at 600 Degree-Sign C), whereas the Seebeck coefficient (S) only slightly increased (S=203 {mu}V/K (Li{sub 0.5}Zn{sub 0.5}Rh{sub 2}O{sub 4}), 216 {mu}V/K (Zn{sub 0.5}Rh{sub 2}O{sub 4}) at 600 Degree-Sign C). In Zn{sub 0.5}Rh{sub 2}O{sub 4}, a mixed-valence configuration of Rh{sup 3+} and Rh{sup 4+} at a ratio of 1 to 1 and a half-deficient A-site were realized, resulting in high {sigma} and even slightly increased S, which were likely attributed to the rather high power factor of 2.3 Multiplication-Sign 10{sup -4} W/m K{sup 2} at 600 Degree-Sign C. Our findings demonstrate that controlling the Rh{sup 4+}/Rh{sup 3+} ratio is a promising method for enhancing the thermoelectric properties. - Graphical abstract: Temperature dependence of power factor (PF) of Li{sub 0.5}Zn{sub 0.5}Rh{sub 2}O{sub 4}, Li{sub 0.25}Zn{sub 0.5}Rh{sub 2}O{sub 4}, and Zn{sub 0.5}Rh{sub 2}O{sub 4} thin films. Highlights: Black-Right-Pointing-Pointer A-site-deficient Zn{sub 0.5}Rh{sub 2}O{sub 4} was prepared by subtracting Li from Li{sub 0.5}Zn{sub 0.5}Rh{sub 2}O{sub 4}. Black-Right-Pointing-Pointer A mixed-valence configuration with a Rh{sup 4+}/Rh{sup 3+} ratio of 1 was likely realized. Black-Right-Pointing-Pointer Such a configuration lead to an enhanced {sigma} of 50S/cm and S of 216 {mu}V/K at 600 Degree-Sign C. Black-Right-Pointing-Pointer Controlling the Rh{sup 4+}/Rh{sup 3+} ratio is a candidate for enhancing the thermoelectricity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Three Pb{sup II} coordination polymers based on 2-(pyridin-2-yl)-1H-imidazole-4,5-dicarboxylic acid: Syntheses, crystal structures, and fluorescent properties

Three lead coordination polymers, [PbCl(C{sub 10}H{sub 6}N{sub 3}O{sub 4})(H{sub 2}O)·H{sub 2}O]{sub n} (1), [Pb(C{sub 10}H{sub 6}N{sub 3}O{sub 4}){sub 2}(H{sub 2}O)]{sub n} (2) and [Pb{sub 3}(C{sub 10}H{sub 5}N{sub 3}O{sub 4}){sub 3}]{sub n} (3) (C{sub 10}H{sub 7}N{sub 3}O{sub 4}=2-(pyridin-2-yl)-1H-imidazole-4,5-dicarboxylic acid), have been hydrothermally synthesized and structurally characterized by single-crystal X-ray diffraction. In 1, Cl anions connected neighboring wave-like 2D layers, which are constructed with left- and right-handed helical chains, into a 3D network structure with a (6{sup 3})(6{sup 5}·8) topology. In 2, Pb cations are linked into a 3D 6{sup 6} network with left- and right-handed helixes by μ{sub 2}-bridging C{sub 10}H{sub 6}N{sub 3}O{sub 4}{sup −} ligands. In 3, C{sub 10}H{sub 5}N{sub 3}O{sub 4}{sup 2−} ligands link Pb{sub 6}O{sub 12} clusters into a 3D (4{sup 12}·6{sup 3}) network. Their fluorescent properties were also investigated. - Graphical abstract: Three 3D lead compounds based on 2-(pyridin-2-yl)-1H-imidazole-4,5-dicarboxylic acid have been hydrothermally synthesized. Four new coordination modes of the organic ligand are first reported. Display Omitted - Highlights: • Three new Pb(II) complexes have been synthesized and characterized. • Left- and right-handed helical chains can be found in the 3D networks of 1 and 2. • Pb{sub 6}O{sub 12} clusters are connected into (4{sup 12}·6{sup 3}) network in 3.

36 MATERIALS SCIENCE↗

Synthesis and characterization of a nanocomposite of goethite nanorods and reduced graphene oxide for electrochemical capacitors

We report a one-step synthesis of a nanocomposite of goethite ({alpha}-FeOOH) nanorods and reduced graphene oxide (RGO) using a solution method in which ferrous cations serve as a reducing agent of graphite oxide (GO) to graphene and a precursor to grow goethite nanorods. As-prepared goethite nanorods have an average length of 200 nm and a diameter of 30 nm and are densely attached on both sides of the RGO sheets. The electrochemical properties of the nanocomposite were characterized by cyclic voltammetry (CV) and chronopotentiometry (CP) charge-discharge tests. The results showed that goethite/RGO composites have a high electrochemical capacitance of 165.5 F g{sup -1} with an excellent recycling capability making the material promising for electrochemical capacitors. - Graphical abstract: The reduced graphene oxide sheets are decorated with goethite nanorods. The as-prepared composite exhibits a high electrochemical capacitance with good recycling capability, which is promising for supercapacitor applications. Higlights: Black-Right-Pointing-Pointer Ferrous ions act as reductant of graphite oxide and precursor of goethite nanorods. Black-Right-Pointing-Pointer Goethite nanorods are attached on both sides of the reduced graphene oxide sheets. Black-Right-Pointing-Pointer Composite exhibits a high specific capacitance and a good recycling capability. Black-Right-Pointing-Pointer Composite is promising for supercapacitor applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗