Search NASA⌕ Search

SEARCH · Search NASA

Results for “Planetary orbits”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Requirements and capabilities for planetary missions. Volume 2: Mars polar orbiter penetrator 1981

The Mars Polar Orbiter/Penetrator 1981 mission, intended to investigate the manner in which Mars has evolved, and which surveys its geochemistry, performs climatological investigations, and attempts to determine the planet's gravitational field, was described. The spacecraft, modified from the Viking Orbiter design, carries a new remote-sensing payload and six penetrators. The penetrators are released from a 2.46-h, 1000-km sun synchronous circular orbit and interrogated daily throughout the 2-year orbital mission. X-band telemetry is used to increase data return.

Ball, G. G.↗

Low cost transfer into useful sun-synchronous orbits at Mars

Mars oblateness has been found to provide sun-synchronous orbits, including orbits with stationary apsides, similar to those used at earth. A low mass and low data rate complement of scientific instruments placed in such orbits can provide exciting planetary investigations such as the Mars Orbiter Water Mission described herein. Use of a modest Shuttle kickstage (PAM-A) and existing spacecraft hardware makes this mission low-cost. A preliminary mission and spacecraft design is described. The major emphasis of the paper is on the mechanics of heliocentric transfer for the 1986 and 1988 launch opportunities, Martian sun-synchronous orbit geometries, injectable mass capabilities, and methods of achieving these scientifically useful orbits.

Glickman, R. E.↗

OTV propulsion tecnology programmatic overview

An advanced orbit transfer vehicles (OTV) which will be an integral part of the national space transportation system to carry men and cargo between low Earth orbit and geosynchronous orbit will perform planetary transfers and deliver large acceleration limited space structures to high Earth orbits is reviewed. The establishment of an advanced propulsion technology base for an OTV for the mid 1990's is outlined. The program supports technology for three unique engine concepts. Work is conducted to generic technologies which benefit all three concepts and specific technology which benefits only one of the concepts. Concept and technology definitions to identify propulsion innovations, and subcomponent research to explore and validate their potential benefits are included.

Cooper, L. P.↗

Planetary operations for the Pioneer Venus Orbiter mission

The Pioneer Venus Orbiter was inserted into Venus orbit on December 4, 1974 and is expected to operate until 1992. This paper discusses the scientific objectives of the Pioneer Venus Orbiter Project components, i.e., the Orbiter spacecraft, the atmosphere entry Probes, and the probe Bus, together with the design and operation characteristics of the Orbiter. Consideration is also given to the science instruments of the Orbiter, to their requirements with respect to pointing, orientation, and timing, and to the ground operations system. The Probes, the Bus, and the Orbiter were selected to study Venus in complementary ways: the Probes by sounding through most of the atmosphere at four locations, the probe Bus by sounding through the upper atmosphere during entry, and the Orbiter by in situ planet-wide observations of the ionosphere and the extreme upper atmosphere, and by examining the surface and interior remotely. In addition, the Orbiter also observes the interactions of Venus with the solar environment.

Jackson, Robert W.↗

The Potential for Imaging in Situ Damage in Inflatable Space Structures

NASA is investigating the use of inflatable habitat structures for orbital transfer and planetary applications. Since space structures are vulnerable to damage from micrometeoroid and orbital debris, it is important to investigate means of detecting such damage. This study is an investigation into methods for performing non-destructive evaluation (NDE) on inflatable habitat modules. Results of this work showed that various electromagnetic imaging modalities from microwaves to terahertz imaging have the greatest potential for a viable, portable, NDE tool which could possibly be deployed aboard an inflatable habitat module.

Madaras, Eric I.↗

Development of a Silicon Carbide Molecular Beam Nozzle for Simulation Planetary Flybys and Low-Earth Orbit

From commercial origins as a molybdenum molecular beam nozzle, a ceramic nozzle of silicon carbide (SiC) was developed for space environment simulation. The nozzle is mechanically stable under extreme conditions of temperature and pressure. A heated, continuous, supersonically-expanded hydrogen beam with a 1% argon seed produced an argon beam component of nearly 4 km/s, with an argon flux exceeding 1x1014 /cm2.s. This nozzle was part of a molecular beam machine used in the Atmospheric Experiments Branch at NASA Goddard Space Flight Center to characterize the performance of the University of Texas at Dallas Ram Wind Sensor (RWS) aboard the Air Force Communications/Navigation Outage Forecasting System (C/NOFS) launched in the Spring of 2008.

Patrick, E. L.↗

LOW STELLAR OBLIQUITIES IN COMPACT MULTIPLANET SYSTEMS

We measure the sky-projected stellar obliquities ({lambda}) in the multiple-transiting planetary systems KOI-94 and Kepler-25, using the Rossiter-McLaughlin effect. In both cases, the host stars are well aligned with the orbital planes of the planets. For KOI-94 we find {lambda} = -11 Degree-Sign {+-} 11 Degree-Sign , confirming a recent result by Hirano and coworkers. Kepler-25 was a more challenging case, because the transit depth is unusually small (0.13%). To obtain the obliquity, it was necessary to use prior knowledge of the star's projected rotation rate and apply two different analysis methods to independent wavelength regions of the spectra. The two methods gave consistent results, {lambda} = 7 Degree-Sign {+-} 8 Degree-Sign and -0. Degree-Sign 5 {+-} 5. Degree-Sign 7. There are now a total of five obliquity measurements for host stars of systems of multiple-transiting planets, all of which are consistent with spin-orbit alignment. This alignment is unlikely to be the result of tidal interactions because of the relatively large orbital distances and low planetary masses in the systems. In this respect, the multiplanet host stars differ from hot-Jupiter host stars, which commonly have large spin-orbit misalignments whenever tidal interactions are weak. In particular, the weak-tide subset of hot-Jupiter hosts has obliquities consistent with an isotropic distribution (p = 0.6), but the multiplanet hosts are incompatible with such a distribution (p {approx} 10{sup -6}). This suggests that high obliquities are confined to hot-Jupiter systems, and provides further evidence that hot-Jupiter formation involves processes that tilt the planetary orbit.

79 ASTRONOMY AND ASTROPHYSICS↗

ARE TIDAL EFFECTS RESPONSIBLE FOR EXOPLANETARY SPIN–ORBIT ALIGNMENT?

The obliquities of planet-hosting stars are clues about the formation of planetary systems. Previous observations led to the hypothesis that for close-in giant planets, spin–orbit alignment is enforced by tidal interactions. Here, we examine two problems with this hypothesis. First, Mazeh and coworkers recently used a new technique—based on the amplitude of starspot-induced photometric variability—to conclude that spin–orbit alignment is common even for relatively long-period planets, which would not be expected if tides were responsible. We re-examine the data and find a statistically significant correlation between photometric variability and planetary orbital period that is qualitatively consistent with tidal interactions. However it is still difficult to explain quantitatively, as it would require tides to be effective for periods as long as tens of days. Second, Rogers and Lin argued against a particular theory for tidal re-alignment by showing that initially retrograde systems would fail to be re-aligned, in contradiction with the observed prevalence of prograde systems. We investigate a simple model that overcomes this problem by taking into account the dissipation of inertial waves and the equilibrium tide, as well as magnetic braking. We identify a region of parameter space where re-alignment can be achieved, but it only works for close-in giant planets, and requires some fine tuning. Thus, while we find both problems to be more nuanced than they first appeared, the tidal model still has serious shortcomings.

79 ASTRONOMY AND ASTROPHYSICS↗

SATELLITE DYNAMICS ON THE LAPLACE SURFACE

The orbital dynamics of most planetary satellites is governed by the quadrupole moment from the equatorial bulge of the host planet and the tidal field from the Sun. On the Laplace surface, the long-term orbital evolution driven by the combined effects of these forces is zero, so that orbits have a fixed orientation and shape. The 'classical' Laplace surface is defined for circular orbits, and coincides with the planet's equator at small planetocentric distances and with its orbital plane at large distances. A dissipative circumplanetary disk should settle to this surface, and hence satellites formed from such a disk are likely to orbit in or near the classical Laplace surface. This paper studies the properties of Laplace surfaces. Our principal results are: (1) if the planetary obliquity exceeds 68.{sup 0}875, there is a range of semimajor axes in which the classical Laplace surface is unstable; (2) at some obliquities and planetocentric distances, there is a distinct Laplace surface consisting of nested eccentric orbits, which bifurcates from the classical Laplace surface at the point where instability sets in; (3) there is also a 'polar' Laplace surface perpendicular to the line of nodes of the planetary equator on the planetary orbit; (4) for circular orbits, the polar Laplace surface is stable at small planetocentric distances and unstable at large distances; (5) at the onset of instability, this polar Laplace surface bifurcates into two polar Laplace surfaces composed of nested eccentric orbits.

79 ASTRONOMY AND ASTROPHYSICS↗

Laser Technology in Interplanetary Exploration: The Past and the Future

Laser technology has been used in planetary exploration for many years but it has only been in the last decade that laser altimeters and ranging systems have been selected as flight instruments alongside cameras, spectrometers, magnetometers, etc. Today we have an active laser system operating at Mars and another destined for the asteroid Eros. A few years ago a laser ranging system on the Clementine mission changed much of our thinking about the moon and in a few years laser altimeters will be on their way to Mercury, and also to Europa. Along with the increased capabilities and reliability of laser systems has came the realization that precision ranging to the surface of planetary bodies from orbiting spacecraft enables more scientific problems to be addressed, including many associated with planetary rotation, librations, and tides. In addition, new Earth-based laser ranging systems working with similar systems on other planetary bodies in an asynchronous transponder mode will be able to make interplanetary ranging measurements at the few cm level and will advance our understanding of solar system dynamics and relativistic physics.

Smith, David E.↗

Space Telerobotics and Rover Research at JPL

The goal of our program is to develop, integrate and demonstrate the science and technology of remote telerobotics leading to increases in operational capability, safety, cost effectiveness and probability of success of NASA missions. To that end, the program fosters the development of innovative system concepts for on-orbit servicing and planetary surface missions which use telerobotic systems as an important central component. These concepts are carried forward into develoments which are used to evaluate and demonstrate technology in realistic flight and ground experiments.

telepresence rover technology robotic assisted mic↗

MODELING PLANETARY SYSTEM FORMATION WITH N-BODY SIMULATIONS: ROLE OF GAS DISK AND STATISTICS COMPARED TO OBSERVATIONS

During the late stage of planet formation, when Mars-sized cores appear, interactions among planetary cores can excite their orbital eccentricities, accelerate their merging, and thus sculpt their final orbital architecture. This study contributes to the final assembling of planetary systems with N-body simulations, including the type I or II migration of planets and gas accretion of massive cores in a viscous disk. Statistics on the final distributions of planetary masses, semimajor axes, and eccentricities are derived and are comparable to those of the observed systems. Our simulations predict some new orbital signatures of planetary systems around solar mass stars: 36% of the surviving planets are giant planets (>10 M{sub +}). Most of the massive giant planets (>30 M{sub +}) are located at 1-10 AU. Terrestrial planets are distributed more or less evenly at <1-2 AU. Planets in inner orbits may accumulate at the inner edges of either the protostellar disk (3-5 days) or its magnetorotational instability dead zone (30-50 days). There is a planet desert in the mass-eccentricity diagram, i.e., a lack of planets with masses 0.005-0.08M{sub J} in highly eccentric orbits (e > 0.3-0.4). The average eccentricity ({approx}0.15) of the giant planets (>10 M{sub +}) is greater than that ({approx}0.05) of the terrestrial planets (<10 M{sub +}). A planetary system with more planets tends to have smaller planet masses and orbital eccentricities on average.

79 ASTRONOMY AND ASTROPHYSICS↗

Modification of an impulse-factoring orbital transfer technique to account for orbit determination and maneuver execution errors

A method has previously been developed to satisfy terminal rendezvous and intermediate timing constraints for planetary missions involving orbital operations. The method uses impulse factoring in which a two-impulse transfer is divided into three or four impulses which add one or two intermediate orbits. The periods of the intermediate orbits and the number of revolutions in each orbit are varied to satisfy timing constraints. Techniques are developed to retarget the orbital transfer in the presence of orbit-determination and maneuver-execution errors. Sample results indicate that the nominal transfer can be retargeted with little change in either the magnitude (Delta V) or location of the individual impulses. Additonally, the total Delta V required for the retargeted transfer is little different from that required for the nominal transfer. A digital computer program developed to implement the techniques is described.

Kibler, J. F.↗