Search NASA⌕ Search

SEARCH · Search NASA

Results for “Project 8”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Observations of ULF electric field fluctuations in the dayside auroral oval

Electric field oscillations at frequencies centered below 10 Hz were measured by a payload equipped with double-probe electric field detectors which was launched into the dayside auroral oval during the Greenland rocket campaign on January 11, 1975. These oscillations exceeded an amplitude of 3 mV/m broadband and occurred over a period of about 90 s. These oscillations occurred during a proton injection event when the quasi-static electric field was less than 20 mV/m on the average. However, during a brief 2-s interval the electric field exceeded 50 mV/m. Analysis of the amplitude as a function of the spin frequency showed that the electric field was confined to a plane perpendicular to the magnetic field. The power spectrum was of the form f to the -6.5 + or - 1.5 power, where f is the frequency over the range from 8 to 18 Hz. The existence of a large electric field fluctuation in a spatially or temporally confined region of low-amplitude turbulence suggests that this may be an observation of the low-altitude projection of a turbulent region associated with electrostatic shocks which have recently been observed at higher altitudes.

Temerin, M.↗
NASA NTRS1982

Electric propulsion research and technology in the United States

Near-, mid-, and long-term technology goals for space electric propulsion systems are reviewed. Technological readiness has been demonstrated for 8 cm, 5 mN, and 30 cm, 30 mN electrostatic thrusters, with major use seen for GEO communications satellites in the near-term, and space station orbit adjustments later. Ion thrusters and/or MPD thrusters are projected to become viable if a space nuclear reactor system is operational in the 1990s, allowing the transport of thousands of kilograms to the outer planets. Basic research is proceeding on the electrothermal propulsion concept to provide resistojet thrusters suitable for a space station by 1986, although the program is hindered by insufficient funding. A flight test for the ion auxiliary propulsion system is detailed, and test results of the solar electric rocket (SERT II) are reported. Particular note is made of the progress on the solar electric propulsion system for the Shuttle and the Nuclear electric propulsion system for thermal-to-electric conversion for mid-1990s applications.

Hudson, W. R.↗
NASA NTRS1991

The spatial variations of lightning during small Florida thunderstorms

Networks of field mills (FM's) and lightning direction finders (LDF's) were used to locate lightning over the NASA KSC on three storm days. Over 90 percent of all cloud-to-ground (CG) flashes that were detected by the LDF's in the study area were also detected by the LDF's. About 17 percent of the FM CG events could be fitted to either a monopole or a dipole charge model. These projected FM charge locations are compared to LDF locations, i.e., the ground strike points. It was found that 95 percent of the LDF points are within 12 km of the FM charge, 75 percent are within 8 km, and 50 percent are within 4 km. For a storm on 22 Jul. 1988, there was a systematic 5.6 km shift between the FM charge centers and the LDF strike points that might have been caused by the meteorological structure of the storm.

Oram, Timothy D.↗
NASA NTRS1993

Estimation of cirrus cloud particle fallspeeds from vertically pointing Doppler radar

The First ISCCP (International Satellite Cloud Climatology Project) Regional Experiment 2 (FIRE 2) was conducted in Coffeyville, Kansas in late 1991 to study the microphysical and radiative properties of cirrus clouds. A variety of active and passive remote sensors were employed, including an 8-mm-wavelength cloud-sensing Doppler radar developed at the Wave Propagation Laboratory (WPL). The radar, having excellent sensitivity to cloud particles (-30 dBZ at 10 km), good spatial resolution (37 m), and velocity precision (.05 ms -1), is an excellent tool for observing cirrus clouds. Having this radar directed toward the zenith for long periods of time during FIRE 2 permitted the reflectivity-weighted particle fallspeed to be related to reflectivity which allowed a separation of ice particle fallspeeds from vertical air motions. Additionally, such relationships proved useful in other multi-sensor techniques for determining vertical profiles of ice particle characteristic size and ice water content in cirrus clouds. The analysis method and the results of applying it to cirrus cloud reflectivity and velocity data collected during FIRE 2 are discussed.

Orr, Brad W.↗
NASA NTRS2021

Fairfax Water Resources: Estimating Urban Flood Susceptibility, Historical Flooding Extent, and Land Cover Change in Fairfax County, Virginia to Aid in Flood Mitigation Planning

Between 2000 and 2020, Fairfax County, Virginia experienced extreme weather events that caused severe flooding and degradation of roads, businesses, and other public property. A single flood event on July 8th, 2019 resulted in $14.8 million in damages. These flood events routinely impact the community, often resulting in power outages, school closures, and downed trees. The Fairfax County Department of Public Works and Environmental Services partnered with DEVELOP to explore how remotely sensed data could be integrated to support its current flood mitigation efforts. This project used environmental factors such as elevation, slope, and topographic wetness index from Earth observation derived data to map flood susceptibility. We utilized Landsat 5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper Plus (ETM+), Landsat 8 Operational Land Imager (OLI), Sentinel-1 C-Band Synthetic Aperture Radar (C-SAR), and Sentinel-2 Multispectral Instrument (MSI) to map historic flooding events in Fairfax County. These maps will support flood management practices for the Fairfax County Department of Public Works and Environmental Services through the integration of remotely sensed data. Our results show that developed areas in the county are more susceptible to flooding, coinciding with analysis of flood factors, which indicated that imperviousness and tree canopy were the most influential drivers in flood susceptibility. Other results show that using Earth observations to map historical flooding is limited in urban areas due to false positives from SAR imagery between water and shadows. Further research is necessary to evolve the historical flood mapping technique if Earth observations are to be incorporated in future historical flood analysis.

Kaitlynn Hietpas↗
NASA NTRS1994

Atomic data from the iron project. 3: Rate coefficients for electron impact excitation of boron-like ions: Ne VI, Mg VIII, Al IX, Si X, S XII, Ar XIV, Ca XVI and Fe XXII

Collison strengths and maxwellian averaged rate coefficients have been calculated for the 105 transitions among all 15 fine structure levels of the 8 LS terms 2s(sup 2) 2 P(P-2(sup 0 sub 1/, 3/2)), 2s2p(sup 2)(P-4(sub 1/2,3/2,5/2), D-2(sub 3/2, 5/2), S-2(sub 1/2), P-2(sub 1/2, 3/2)), 2p(sup 3)(S-4(sup 0)(sub 3/2), D-2(sup 0 sub 3/2, 5/2), P-2(sup 0 sub 1/2, 3/2)) in highly- charged B-like Ne, Mg, Al, Si, S, Ar, Ca and Fe. Rate coefficients have been tabulated at a wide range of temperatures, depending on the ion charge and abundance in plasma sources. Earlier work for O IV has also been extended to include the high temperature range. A brief discussion of the calculations, sample results, and comparison with earlier works is also given. While much of the new data should be applicable to UV spectral diagnostics, the new rates for the important ground state fine structure transition P-2(sup 0 sub 1/2)-P-2(sup 0 sub 3/2) should result in significant revision of the IR cooling rates in plasmas where B-like ions are prominent constituents, since the new rate coefficients are generally higher by several factors compared with the older data.

Zhang, Hong Lin↗
NASA NTRS1997

Effects of Bioreactor Retention Time on Aerobic Microbial Decomposition of CELSS Crop Residues

The focus of resource recovery research at the KSC-CELSS Breadboard Project has been the evaluation of microbiologically mediated biodegradation of crop residues by manipulation of bioreactor process and environmental variables. We will present results from over 3 years of studies that used laboratory- and breadboard-scale (8 and 120 L working volumes, respectively) aerobic, fed-batch, continuous stirred tank reactors (CSTR) for recovery of carbon and minerals from breadboard grown wheat and white potato residues. The paper will focus on the effects of a key process variable, bioreactor retention time, on response variables indicative of bioreactor performance. The goal is to determine the shortest retention time that is feasible for processing CELSS crop residues, thereby reducing bioreactor volume and weight requirements. Pushing the lower limits of bioreactor retention times will provide useful data for engineers who need to compare biological and physicochemical components. Bioreactor retention times were manipulated to range between 0.25 and 48 days. Results indicate that increases in retention time lead to a 4-fold increase in crop residue biodegradation, as measured by both dry weight losses and CO2 production. A similar overall trend was also observed for crop residue fiber (cellulose and hemicellulose), with a noticeable jump in cellulose degradation between the 5.3 day and 10.7 day retention times. Water-soluble organic compounds (measured as soluble TOC) were appreciably reduced by more than 4-fold at all retention times tested. Results from a study of even shorter retention times (down to 0.25 days), in progress, will also be presented.

Strayer, R. F.↗
NASA NTRS2000

Nineteenth International Microgravity Measurements Group Meeting

The Microgravity Measurements Group meetings provide a forum for an exchange of information and ideas about various aspects of microgravity acceleration research in international microgravity research programs. These meetings are sponsored by the PI Microgravity Services (PIMS) project at the NASA Glenn Research Center. The 19th MGMG meeting was held 11-13 July 2000 at the Sheraton Airport Hotel in Cleveland, Ohio. The 44 attendees represented NASA, other space agencies, universities, and commercial companies; 8 of the attendees were international representatives from Japan, Italy, Canada, Russia, and Germany. Twenty-seven presentations were made on a variety of microgravity environment topics including the International Space Station (ISS), acceleration measurement and analysis results, science effects from microgravity accelerations, vibration isolation, free flyer satellites, ground testing, vehicle characterization, and microgravity outreach and education. The meeting participants also toured three microgravity-related facilities at the NASA Glenn Research Center. Contained within the minutes is the conference agenda, which indicates each speaker, the title of their presentation, and the actual time of their presentation. The minutes also include the charts for each presentation, which indicate the authors' name(s) and affiliation. In some cases, a separate written report was submitted and has been Included here

DeLombard, Richard↗
NASA NTRS2003

The NASA Smart Probe Project for real-time multiple microsensor tissue recognition

BACKGROUND: Remote surgery requires automated sensors, effectors and sensor-effector communication. The NASA Smart Probe Project has focused on the sensor aspect. METHODS: The NASA Smart Probe uses neural networks and data from multiple microsensors for a unique tissue signature in real time. Animal and human trials use several probe configurations: (1) 8-microsensor probe (2.5 mm in diameter) for rodent studies (normal and subcutaneous mammary tumor tissues), and (2) 21-gauge needle probe with 3 spectroscopic fibers and an impedance microelectrode for breast cancer diagnosis in humans. Multisensor data are collected in real time (update 100 times/s) using PCs. RESULTS: Human data (collected by NASA licensee BioLuminate) from 15 women undergoing breast biopsy distinguished normal tissue from both benign tumors and breast carcinoma. Tumor margins and necrosis are rapidly detected. CONCLUSION: Real-time tissue identification is achievable. Potential applications, including probes incorporating nanoelectrode arrays, are presented. Copyright 2003 S. Karger AG, Basel.

Biopsy/methods↗
NASA NTRS2006

A Whale of a Tale: Creating Spacecraft Telemetry Data Analysis Products for the Deep Impact Mission

A description of the Whale product generation utility and its means of analyzing project data for Deep Impact Missions is presented. The topics include: 1) Whale Definition; 2) Whale Overview; 3) Whale Challenges; 4) Network Configuration; 5) Network Diagram; 6) Whale Data Flow: Design Decisions; 7) Whale Data Flow Diagram; 8) Whale Data Flow; 9) Whale Team and Users; 10) Creeping Requirements; 11) Whale Competition; 12) Statistics: Processing Time; 13) CPU and Disk Usage; 14) The Ripple Effect of More Data; and 15) Data Validation and the Automation Challenge.

ground data systems↗
NASA NTRS2008

Aeroheating Test of CEV Entry Vehicle at Turbulent Conditions

An investigation of the aeroheating environment of the Project Orion Crew Entry Vehicle has been performed in the Arnold Engineering Development Center Tunnel 9. Data were measured on a approx. 3.5% scale model (0.1778m/7-inch diam.) of the vehicle using coaxial thermocouples in the Mach 8 and Mach 10 nozzles of Tunnel 9. Runs were performed at free stream Reynolds numbers of 1 106/ft to 20 10(exp 6)/ft in the Mach 10 nozzle and 8 10(exp 6)/ft to 48 10(exp 6)/ft in the Mach 8 nozzle. The test gas in Tunnel 9 is pure N2, which at these operating conditions remains un-dissociated and may be treated as a perfect gas. At these conditions, laminar, transitional, and turbulent flow was produced on the model at Mach 10, and transitional and turbulent conditions were produced on the model at Mach 8. The majority of runs were made on a clean, smooth-surface model configuration and a limited number of runs were made in which inserts with varying boundary-layer trips configurations were used to force the occurrence of transition. Laminar and turbulent predictions were generated for all wind tunnel test conditions and comparisons were performed with the data for the purpose of helping to define uncertainty margins for the computational method. Data from both the wind tunnel test and the computations are presented herein. Figure 1 shows a schematic of the thermocouple locations on the model and figures 2 and 3 show a photo and schematic of the AEDC Hypervelocity Tunnel 9. Figure 4 shows a typical grid used in the computations. From the comparisons shown in figures 5 through 8 it was concluded that for perfect-gas conditions, the computations could predict either fully-laminar or full-turbulent flow to within +/-10% of the experimental data. The experimental data showed that transition began on the leeside of the heatshield at a free stream Reynolds number of 9 10(exp 6)/ft in the Mach 10 nozzle and fully-developed turbulent flow was produced at 20 10(exp 6)/ft. In the Mach 8 nozzle, transition on the leeside of the heat-shield was observed for all test conditions, and full-developed turbulent flow occurred at a free stream Reynolds number of 18 10(exp 6)/ft. On the aftbody of the vehicle no evidence of turbulence was detected at Mach 10 conditions, and at Mach 8 conditions, transition appeared to begin on the windside of the aftbody at free stream Reynolds number of 18x10(exp 6)/ft with fully-developed turbulent flow occurring only at the highest test condition of 48x10(exp 6)/ft.

Hollis, Brian R.↗
NASA NTRS2004

Error Cost Escalation Through the Project Life Cycle

It is well known that the costs to fix errors increase as the project matures, but how fast do those costs build? A study was performed to determine the relative cost of fixing errors discovered during various phases of a project life cycle. This study used three approaches to determine the relative costs: the bottom-up cost method, the total cost breakdown method, and the top-down hypothetical project method. The approaches and results described in this paper presume development of a hardware/software system having project characteristics similar to those used in the development of a large, complex spacecraft, a military aircraft, or a small communications satellite. The results show the degree to which costs escalate, as errors are discovered and fixed at later and later phases in the project life cycle. If the cost of fixing a requirements error discovered during the requirements phase is defined to be 1 unit, the cost to fix that error if found during the design phase increases to 3 - 8 units; at the manufacturing/build phase, the cost to fix the error is 7 - 16 units; at the integration and test phase, the cost to fix the error becomes 21 - 78 units; and at the operations phase, the cost to fix the requirements error ranged from 29 units to more than 1500 units

Stecklein, Jonette M.↗
NASA NTRSDate not supplied

Leveraging High Resolution Remotely Sensed Evapotranspiration Data to Assess Water Availability and Vulnerability in the Memphis Aquifer Area in West Tennessee

The Memphis aquifer is an indispensable source of water for municipal, agricultural, and industrial use across west Tennessee. The aquifer's water is thousands of years old and in pristine condition due to the natural geological filtering by the aquifer’s confining clay layers. To sustain the aquifer’s water supply, recharge must happen at a rate efficient enough to keep up with pumping from the aquifer. In partnership with Protect Our Aquifer and the University of Memphis Center for Applied Earth Science and Engineering Research, this project examined multiple factors to discover thriving areas of recharge in west Tennessee. The team used Integrated Multi-satellite Retrievals for GPM (IMERG) precipitation data, ECOsystem Spaceborne Thermal Radiometer on Space Station (ECOSTRESS) evapotranspiration data, Landsat 8 and National Land Cover Database (NLCD) to track landcover change, and the North American Land Data Assimilation System (NLDAS) Noah land surface model to estimate monthly runoff. These factors were averaged seasonally from 2019 to 2022 to understand seasonal relationships within the study area. Precipitation and evapotranspiration data were used to create water balance maps and with the evaporative stress index (ESI), landcover, and runoff maps, the team pinpointed locations that are most conducive to recharge. The team determined that areas where the water balance is low, ESI is high, and where there is sufficient pervious landcover are locations where recharge happens most effectively. Identification of effective recharge locations may be used by the partners to prioritize areas in need of protection before they become impacted by industrialization and urbanization.

Lauren Webster↗
NASA NTRS2015

Advancing Test Capabilities at NASA Wind Tunnels

NASA maintains twelve major wind tunnels at three field centers capable of providing flows at 0.1 M 10 and unit Reynolds numbers up to 45106m. The maintenance and enhancement of these facilities is handled through a unified management structure under NASAs Aeronautics and Evaluation and Test Capability (AETC) project. The AETC facilities are; the 11x11 transonic and 9x7 supersonic wind tunnels at NASA Ames; the 10x10 and 8x6 supersonic wind tunnels, 9x15 low speed tunnel, Icing Research Tunnel, and Propulsion Simulator Laboratory, all at NASA Glenn; and the National Transonic Facility, Transonic Dynamics Tunnel, LAL aerothermodynamics laboratory, 8 High Temperature Tunnel, and 14x22 low speed tunnel, all at NASA Langley. This presentation describes the primary AETC facilities and their current capabilities, as well as improvements which are planned over the next five years. These improvements fall into three categories. The first are operations and maintenance improvements designed to increase the efficiency and reliability of the wind tunnels. These include new (possibly composite) fan blades at several facilities, new temperature control systems, and new and much more capable facility data systems. The second category of improvements are facility capability advancements. These include significant improvements to optical access in wind tunnel test sections at Ames, improvements to test section acoustics at Glenn and Langley, the development of a Supercooled Large Droplet capability for icing research, and the development of an icing capability for large engine testing. The final category of improvements consists of test technology enhancements which provide value across multiple facilities. These include projects to increase balance accuracy, provide NIST-traceable calibration characterization for wind tunnels, and to advance optical instruments for Computational Fluid Dynamics (CFD) validation. Taken as a whole, these individual projects provide significant enhancements to NASA capabilities in ground-based testing. They ensure that these wind tunnels will provide accurate and relevant experimental data for years to come, supporting both NASAs mission and the missions of our government and industry customers.

wind tunnel testing↗
NASA NTRS2024

Durable Antifog Coatings for Spacesuit Helmets

Maintaining a high level of visibility through the helmet of NASA Extravehicular Mobility Unit (EMU) is very difficult under inclement operational conditions. The interior of the helmet bubble will fog up in a high humidity / cold environment with high work rate breathing for extravehicular activity (EVA) that can last up to 8 hours. Currently used wipe on antifog solutions have problems with i) durability, requiring reapplication for every EVA, ii) can potentially get in the astronaut’s eye, impairing their vision, and iii) bottles of solution are a consumable that need to be continuously restocked. Luna Labs has developed a durable, transparent coating that is projected to maintain optical and antifogging properties for the lifetime of the equipment. Luna Labs has leveraged our established Gentoo™ sol-gel coating platform to create a robust, transparent, long-lasting, and antifogging coating. Additionally, the proposed sol-gel coating is thin (2-8 µm), low cost (cents/ft 2 ), and easy to apply while providing excellent abrasion durability and antifogging properties. Luna Labs has produced a coating formulation to possess antifogging properties so that moist air will wet out, forming a microscopically thin sheet of water that does not scatter light. A custom superhydrophilic additive which crosslinks into the durable coating matrix provides superb antifogging properties. This non-scratch transparent coating that will provide continuous antifogging efficacy for >8 hours and environmental durability to last the lifetime of coated component. This technology is relevant to NASA spacesuit applications, as well as for automobiles, aircraft, eyewear, SCUBA masks or any other applications that require transparent antifogging properties.

Spacesuit↗
NASA NTRS1976

Hypersonic research engine/aerothermodynamic integration model: Experimental results. Volume 3: Mach 7 component integration and performance

The NASA Hypersonic Research Engine Project was undertaken to design, develop, and construct a hypersonic research ramjet engine for high performance and to flight test the developed concept on the X-15-2A airplane over the speed range from Mach 3 to 8. Computer program results are presented here for the Mach 7 component integration and performance tests.

Andrews, E. H., Jr.↗
NASA NTRS1978

Extraterrestrial intelligence - An observational approach

The article surveys present and proposed search techniques for extraterrestrial intelligence in terms of technological requirements. It is proposed that computer systems used along with existing antennas may be utilized to search for radio signals over a broad frequency range. A general search within the electromagnetic spectrum would explore frequency, received power flux, spatial locations, and modulation. Previous SETI projects (beginning in 1960) are briefly described. An observation project is proposed in which the earth's rotational motion would scan the antenna beam along one declination circle in 24 hours. The 15 degree beam width would yield a mapping of 75% of the sky in an 8-day period if the beam were shifted 15 degrees per day. With the proposed instrument parameters, a sensitivity of about 10 to the -21 watt/sq m is achieved at a 0 degree declination and 1.5 GHz. In a second phase, a 26 m antenna would yield an HPBW of 0.8 degrees at 1 GHz and 0.03 degrees at 25 GHz. It is noted that the described technology would provide secondary benefits for radio astronomy, radio communications, and other fields.

Murray, B.↗
NASA NTRS2005

Return to Flight Resource Reel 2 of 2

A continuation of the tests performed on the Space Shuttle Discovery in preparation for its return to flight is presented. The tests include: 1) Shuttle Robot Arm Recertification; 2) Michael Hiltz Systems Group Leader; 3) Orbiter Boom Fabrication; 4) Orbiter Boom Final Development; 5) Gary Searle Manager of Orbiter Boom Sensor System (OBSS) Manufacturing and Assembly; 6) Orbiter Boom Qualification Unit; 7) STS-114 Crew Inspects Orbiter Boom at Kennedy Space Center; 8) Orbiter Boom Inspection of Thermal Protection System Animation; 9) External Tank Bipod Redesign; 10) External Tank Flange Redesign; 11) External Tank Bellows Redesign; 12) Shuttle Main Engine Testing and Delivery to Kennedy Space Center; 13) Ronnie Rigney Project Manager Space Shuttle Main Engine Program Office; 14) Gene Goldmman NASA Project Manager Space Shuttle Main Engine Project; 15) Mike Cosgrove Boeing-Rocketdyne Flow Manager; 16) Shuttle Rocket Booster Build-Up; 17) Ascent Imagery Improvements; and 18) STS-114 Flight Control Team and Mission Management Team.

Source record↗