Search NASA⌕ Search

SEARCH · Search NASA

Results for “REFLECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Electronic Melting of Silicon in Nanostructures using X-ray Forbidden Bragg Reflections

Abstract We carried out a short beamtime at the Pohang Accelerator Laboratory x-ray Free Electron Laser to perform a pump-probe (PP) laser excitation diffraction experiment on the silicon (222) forbidden Bragg peak. To limit the x-ray penetration, we used a “device layer” silicon film wafer bonded to a silicon substrate. The sample, specially fabricated by MEMC Electronic Materials, had a Si(100) substrate bonded to a 170 nm Si(100) film rotated at 45° for crystallographic isolation. A second sample was reactive-ion-etched down to 52 nm thickness. In the silicon lattice, the covalent bonds are seen exclusively at the 222 reflection. Upon laser excitation, these electrons are expected to be excited to the valence band on femtosecond electronic time scales. The Si(222) reflection is therefore expected to be extinguished on this fast time scale, while the electron–phonon coupled acoustic response is determined by the lattice dynamics. The latter is determined by the speed of sound over the device thickness, which is in the mid-picosecond range.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Intensity Of The 2.7nm Reflection As A Constraint For Models Of Myosin Docking To Actin

Previous workers have proposed high resolution models for the docking of the myosin heads on actin on the basis of combined crystallographic and electron microscopy data (Mendelson and Morris, 1997 PNAS 94:8533; Holmes et al. 2003 Nature 425:423). We have used data from small angle X-ray fiber diffraction from living muscle to check the predictions of these models. Whole sartorius muscles from Rana pipiens were mounted in a chamber containing Ringer's solution at 10 C and at rest length at the BioCAT beamline (18 ID, Advanced Photon Source, Argonne, IL-U.S.A.). The muscles were activated by electrical stimulation and the force was recorded with a muscle lever system type 300B (Aurora Scientific). X-ray patterns were collected with 1s total exposures at rest and during isometric contraction out to 0.5 nm{sup -1} in reciprocal space, as the higher angle reflections are expected to be more sensitive to the arrangement of myosin heads on actin. We observed that during isometric contraction the meridional reflection originating from the 2.73nm repeat of the actin monomers along the actin filament increases its intensity by a factor 2.1 {+-} 0.2 relative to rest. Among the models tested, Holmes et al. fits the data when the actin filament is decorated with 30-40% the total available myosin heads, a fraction similar to that estimated with fast single fiber mechanics by Piazzesi et al. (2007, Cell 131:784). However, when the mismatch between the periodicities of actin and myosin filaments is taken into account, none of the models can reproduce the fiber diffraction data. We suggest that the fiber diffraction data should be used as a further constraint on new high resolution models for the docking of the myosin heads on actin.

43 PARTICLE ACCELERATORS↗

Simultaneous study of mechanical property development and early hydration chemistry in Portland cement slurries using X-ray diffraction and ultrasound reflection

A sample cell for the simultaneous measurement of synchrotron X-ray powder diffraction and ultrasound shear-wave reflection data from cement slurries is described. White cement slurries at 25 and 50 C with 0-3% bwoc CaCl{sub 2} were studied to illustrate the potential of the apparatus. The decrease in reflected S-wave amplitude, in dB, showed a linear correlation with C{sub 3}S hydration. CaCl{sub 2} retarded the development of G{prime} and G{double_prime} relative to the extent of C{sub 3}S hydration. At short times, there was a correlation between the time evolution of both G{prime} and G{double_prime}, and the amount of precipitated CH seen by diffraction, which was almost independent of CaCl{sub 2} concentration and temperature. CaCl{sub 2} addition resulted in a decrease in the amount of CH visible to X-rays, relative the degree of C{sub 3}S hydration. This may indicate a change in C-S-H gel C:S ratio or the presence of nanoscale CH that could not be seen by diffraction.

36 MATERIALS SCIENCE↗

Assessing the thermal maturity of black shales using vitrinite reflectance: Insights from Devonian black shales in the eastern United States

Thermal maturity of source rocks indicated by vitrinite reflectance (R o ) is an important and reliable parameter to determine the petroleum potential of sedimentary basins. Originally, R o was used to characterize the degree of coalification of coals and thus works well for coal seams, but it has limitations when used to determine the thermal maturity of black shale successions. A suite of six coal-shale pairs from the Upper Devonian black shale formations in the eastern United States (New Albany Shale, Ohio Shale, Dunkirk Shale, and Rhinestreet Shale) was selected to study the applicability of R o in assessing the thermal maturity of black shale successions. The results show that vitrinite in the studied coal samples is dominated by collotelinite, whereas vitrinite in black shales occurs as small dispersed particles (~5 μm) in the mineral matrix. When comparing the size and morphology of dispersed vitrinite particles in shales and collotelinite fragments in coals, vitrinite in shales and adjacent coals should have the same origin. The measured mean random R o of vitrinite in coals ranges from 0.51–0.68%, and is 0.04–0.11% (average 0.07%) lower than that of dispersed vitrinite particles in enclosing shales. This observation contrasts with previously reported R o suppression in liptinite-rich black shales. A high standard deviation of R o measurements indicates a highly heterogeneous nature of vitrinite in black shales. Three mechanisms can be envisioned to contribute to the higher R o of dispersed vitrinite particles in black shales relative to enclosed coals. First, small vitrinite particles may become more oxidized because small particles are more frequently suspended during transport to the site of deposition and reworking of bottom sediments after deposition than large pieces of driftwood that will turn into enclosed coal lenses during burial diagenesis. Second, misidentification of zooclast (e.g., chitinozoan) fragments as vitrinite due to loss of diagnostic morphology. Third, various macerals in the vitrinite group (e.g., corpogelinite and collotelinite) may have had different original reflectance values. Based on the petrographic characteristics of vitrinite and vitrinite-like particles, caution should be applied when using the R o values of dispersed vitrinite and vitrinite-like particles in black shales as indicators of thermal maturity.

58 GEOSCIENCES↗

Interlaboratory Study: Testing Reproducibility of Solid Biofuels Component Identification Using Reflected Light Microscopy

Considering global market trends and concerns about climate change and sustainability, increased biomass use for energy is expected to continue. As more diverse materials are being utilized to manufacture solid biomass fuels, it is critical to implement quality assessment methods to analyze these fuels thoroughly. One such method is reflected light microscopy (RLM), which has the potential to complement and enhance current standard testing, leading to improving fuel quality assessment and, ultimately, preventing avoidable air pollution. An interlaboratory study (ILS) was conducted to test the reproducibility of biomass fuels component identification using a reflected light microscopy technique. The exercise was conducted on thirty photomicrographs showing biomass and various undesired components (like plastics or mineral matter), which were purposely added (by the ILS organizers) to contaminate wood pellets and charcoal-based grilling fuels. Forty-six participants had various levels of difficulty identifying the marked components, and as a result, the percentage of correct answers ranged from 52.2 to 94.4%. Among the most difficult components to distinguish were petroleum products and inorganic matter. Various reasons led to the misidentification, including insufficient morphological descriptions of the components provided to participants, ambiguities of the nomenclature, limitations of the analytical and exercise method, and insufficient experience of the participants. Overall, the results indicate that RLM has the potential to enhance the quality assessment of biomass fuels. However, they also demonstrate that the petrographic classification used in this exercise requires further refinement before it can be standardized. While a new simplified classification of solid biomass fuels components was created as an outcome of this study, future research is necessary to refine the nomenclature, develop a microscopic morphological description of the components, and verify the accuracy of component identification with a follow-up ILS.

biomass↗

Specular reflection treatment for the 3D radiative transfer equation solved with the discrete ordinates method

The contribution of this paper relies in the development of numerical algorithms for the mathematical treatment of specular reflection on borders when dealing with the numerical solution of radiative transfer problems. The radiative transfer equation being integro-differential, the discrete ordinates method allows to write down a set of semi-discrete equations in which weights are to be calculated. The calculation of these weights is well known to be based on either a quadrature or on angular discretization, making the use of such method straightforward for the state equation. Also, the diffuse contribution of reflection on borders is usually well taken into account. However, the calculation of accurate partition ratio coefficients is much more tricky for the specular condition applied on arbitrary geometrical borders. This paper presents algorithms that calculate analytically partition ratio coefficients needed in numerical treatments. The developed algorithms, combined with a decentered finite element scheme, are validated with the help of comparisons with analytical solutions before being applied on complex geometries.

97 MATHEMATICS AND COMPUTING↗

Hydrothermal synthesis and thermal change in IR reflectance of Al/W co-doped VO2 powder

Highlights: • Al/W-doped VO{sub 2} powders were synthesized by a hydrothermally method. • The Al/W-doped VO{sub 2} underwent a phase transition at around room temperature. • The Al/W-doped VO{sub 2} had the larger IR reflectance compared with W-VO{sub 2}(M). - Abstract: Al/W co-doped VO{sub 2} with a monoclinic structure, space group P2{sub 1}/c, was synthesized (hereafter, Al/W-doped VO{sub 2}(M1)) and its thermochromic property was investigated. First, to prepare the precursor for Al/W-doped VO{sub 2}(M1), V{sub 2}O{sub 5}, (NH{sub 4}){sub 10}W{sub 12}O{sub 41}·5H{sub 2}O, and AlCl{sub 3}·H{sub 2}O were dispersed in a citric acid solution and then hydrothermally treated in an autoclave. Then, the Al/W-doped VO{sub 2}(M1) powders were synthesized by heating the obtained precursor at various temperatures under an Ar gas flow. The Al/W-doped VO{sub 2}(M1) has a monoclinic structure with space group P2{sub 1}/c, similar to undoped VO{sub 2}(M1) and W-doped VO{sub 2}(M1). The Al/W-doped VO{sub 2}(M1) indicated that the monoclinic to tetragonal transition temperature was lowered to approximately room temperature by the Al and W doping. The Al/W-doped VO{sub 2}(M1) had the lower optical band gap and showed a larger IR reflectance in the 800–2000 nm range, compared with W-doped VO{sub 2}(M1) and pure VO{sub 2}(M1).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

UV–Visible reflectance of common light reflectors and their degradation after an ionization dose up to 100 Mrad

We report light reflectors are widely used to enhance scintillation light collection. Their enhancement level depends on the reflector’s reflectance at the scintillator’s emission wavelength. We report UV–Visible reflectance spectra, relative to BaSO 4 , for several common reflectors. Also reported is their radiation hardness against an ionization dose up to 100 Mrad. The results of this investigation provide a reference for applications of these reflectors in a severe radiation environment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Emissivity of solar cell cover glass calculated from infrared reflectance measurements

The thermal emissivity of solar cell cover glasses with differences in glass composition or manufacture and surface texture are evaluated using specular and specular+diffuse infrared reflectance at different angles of incidences. Non-textured and textured glasses all exhibit similar emissivity at all angles of incidence regardless of composition and patterning. Both diffuse and specular reflectance must be included for textured glass at any angle of incidence and may be needed for planar glass at a high angle of incidences to properly determine emissivity.

14 SOLAR ENERGY↗

Sub-micrometer random-pyramid texturing of silicon solar wafers with excellent surface passivation and low reflectance

Select emerging solar cell technologies, ranging from very narrow screen-printed fingers to perovskite/silicon tandems, would benefit from a reduction of the height of the standard pyramidal texture of monocrystalline silicon wafers to below 1 μm. However, fabricating such small surface features usually compromises the requisite low reflectance and high passivation quality. Through systematic design of experiments, we demonstrate that conventional alkaline-based wet-chemical etching processes can be tuned to produce dense, spatially homogeneous, and uniformly sized sub-micrometer pyramids. Precise texture size can be further controlled by adding potassium silicate to the texturing solution to effectively slow the pyramid growth rate and promote nucleation. With pyramid size distribution data—extracted from multiple atomic force microscopy images across each wafer—we demonstrate 16 nanotextures with average pyramid sizes ranging from 62 to 512 nm, with the largest having only 0.3% of its pyramids taller than 1 μm. Six of the nanotextures exhibit light trapping and surface defect densities comparable to state-of-the-art microtextured wafers. In conclusion, the best nanotexture achieved an AM1.5G-weighted reflectance of 11.8% and a minority-carrier lifetime of 3.4 ms after passivation with amorphous silicon, demonstrating that smaller textures need not deteriorate solar cell performance.

14 SOLAR ENERGY↗

Development of an Attenuated Total Reflectance–Ultraviolet–Visible Probe for the Online Monitoring of Dark Solutions

Optical spectroscopy is a valuable tool for on-line monitoring of a variety of processes. Ultraviolet-visible (UV-vis) spectroscopy in particular, can monitor the concentration of analytes as well as identify speciation and oxidation state. However, it can be difficult to impossible to employ UV-vis based sensors on chemical systems that are very dark (i.e., high optical density) as exceedingly short pathlengths are required (for transmission approaches) or effective means of backscattering are needed (for reflectance approaches). Examples of processes that would benefit significantly from the use of optical sensors and encounter these challenges include used nuclear fuel recycling and molten salts with high concentrations of dissolved uranium. Utilizing an attenuated total reflectance (ATR) UV-vis approach can overcome these challenges and allow for the measurement of solutions orders of magnitude more concentrated than transmission UV-vis. However, determining ideal sensor specifications for varied processes can be time consuming and expensive. Here, in this study, we evaluate the ability for a novel ATR-UV-vis probe to measure very concentrated solutions of Co(II) and Ni(II) nitrate as well as organic dyes (methylene blue, acid red 1, and crystal violet). This sensor design provides a modular method for exploring possible “pathlengths” by altering the exposed ATR fiber length. Also studied were approaches to loading and measuring the sensor cell. These results are compared to a traditional 1 cm cuvette measured by transmission UV-vis. It was found that the ATR-UV-vis probe was capable of measuring solutions 600 times more concentrated than the 1 cm cuvette. Advanced data analysis in the form of multivariate curve resolution (MCR) was used to analyze the speciation of methylene blue over a large concentration range. The application of this novel ATR-UV-vis probe to the interrogation of dark solutions is a promising avenue for use in on-line monitoring of nuclear processes.

47 OTHER INSTRUMENTATION↗

Lensless x-ray imaging in reflection geometry

Lensless X-ray imaging techniques such as coherent diffraction imaging and ptychography, and Fourier transform holography can provide time-resolved, diffraction-limited images. Nearly all examples of these techniques have focused on transmission geometry, restricting the samples and reciprocal spaces that can be investigated. We report a lensless X-ray technique developed for imaging in Bragg and small-angle scattering geometries, which may also find application in transmission geometries. We demonstrate this by imaging a nanofabricated pseudorandom binary structure in small-angle reflection geometry. The technique can be used with extended objects, places no restriction on sample size, and requires no additional sample masking. The realization of X-ray lensless imaging in reflection geometry opens up the possibility of single-shot imaging of surfaces in thin films, buried interfaces in magnetic multilayers, organic photovoltaic and field-effect transistor devices, or Bragg planes in a single crystal.

36 MATERIALS SCIENCE↗

"Non-Reflective" Boundary Design via Remote Sensing and PID Control Valve

This paper develops the concept of a nonreflective (or semireflective) boundary condition using the combination of a remote sensor and a control system to modulate a relief valve. The essential idea is to sense the pressure change at a remote location and then to use the measured data to adjust the opening of an active control valve at the end of the line to eliminate or attenuate the wave reflections at the valve, thus controlling system transient pressures. This novel idea is shown here through numerical simulation to have considerable potential for transient protection. Using this model, wave reflections and resonance can be effectively eliminated for frictionless pipelines or initial no-flow conditions and can be better controlled in more realistic pipelines for a range of transient disturbances. In addition, the features of even-order harmonics and nonreflective boundary conditions during steady oscillation, obtained through time domain transient analysis, are verified by hydraulic impedance analysis in the frequency domain.

42 ENGINEERING↗

Reflection positivity and monotonicity

We prove general reflection positivity results on Riemannian manifolds for both scalar fields and Dirac fields, and comment on applications to quantum field theory. As another application, we prove the inequality C{sub D}{<=}C{sub N} between Dirichlet and Neumann covariance operators on a manifold with a reflection.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum Reflection of S-wave Unstable States

The phase time in quantum tunneling can be disentangled into a dwell time plus a term arising due to the interference of the reflected and incident waves in front of the barrier. The interference term dominates at low energies and as E{yields}0, this term and hence the phase time becomes singular. With the s-wave motion in three dimensions being equivalent to that of a one-dimensional motion in the radial coordinate, a similar singularity shows up in the phase time delay of s-wave resonances. Relating the scattering matrix in three dimensional collisions to the reflection amplitude, the interference term in tunneling can be identified as a term given in terms of the transition matrix in scattering. Subtraction of this term from the phase time delay gives the dwell time delay which is finite at all energies and is useful in characterizing s-wave resonances such as the {sigma} meson and mesic nuclei near threshold.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Study of Laser Reflectivity on Skin

The response to the light on the skin can be manifested as temperature increase or creation of biochemical byproducts, in which further studies are required to asset the light effect. This response changes the average response over time and can produce discrepancies between similar studies. In this work we present a Low Level Laser Therapy (LLLT) study with feedback. We study the time response reflectivity of a 980 nm laser diode of 25 mW modulated at frequencies close to 40 kHz and detect the reflected light on a silicon photodiode, finding no direct correlation between different test points or individuals, while finding reproducible responses within the same individual and test point.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Real time analysis of self-assembled InAs/GaAs quantum dot growth by probing reflection high-energy electron diffraction chevron image

Self-assembling process of InAs/GaAs quantum dots has been investigated by analyzing reflection high-energy electron diffraction chevron images reflecting the crystal facet structure surrounding the island. The chevron image shows dramatic changes during the island formation. From the temporal evolution of the chevron tail structure, the self-assembling process has been found to consist of four steps. The initial islands do not show distinct facet structures. Then, the island surface is covered by high-index facets, and this is followed by the formation of stable low-index facets. Finally, the flow of In atoms from the islands occurs, which contributes to flatten the wetting layer. Furthermore, we have investigated the island shape evolution during the GaAs capping layer growth by using the same real-time analysis technique.

36 MATERIALS SCIENCE↗

Elimination of total internal reflection in GaInN light-emitting diodes by graded-refractive-index micropillars

A method for enhancing the light-extraction efficiency of GaInN light-emitting diodes (LEDs) by complete elimination of total internal reflection is reported. Analytical calculations show that GaInN LEDs with multilayer graded-refractive-index pillars, in which the thickness and refractive index of each layer are optimized, have no total internal reflection. This results in a remarkable improvement in light-extraction efficiency. GaInN LEDs with five-layer graded-refractive-index pillars, fabricated by cosputtering TiO{sub 2} and SiO{sub 2}, show a light-output power enhanced by 73% and a strong side emission, consistent with analytical calculations and ray-tracing simulations.

36 MATERIALS SCIENCE↗