Search NASA⌕ Search

SEARCH · Search NASA

Results for “Relative positioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Surgical trauma contributes to progression of colon cancer by downregulating CXCL4 and recruiting MDSCs

Highlights: • Laparotomy promotes tumor growth and angiogenesis in vivo. • Laparotomy results in a decrease of CXCL4 expression. • CXCL4 inhibits tumor growth and angiogenesis. • CXCL4 inhibits the recruitment of myeloid-derived suppressor cells. • The expression of CXCL4 and MDSC percentage are correlated with clinical overall survival rates. Surgical stress has been shown to facilitate the tumor growth and metastasis of colon cancer. To unravel the mechanisms underlying surgery induced-colon cancer progression, a syngeneic transplantation tumor model was established with murine colon cancer CT26 cells and the effect of laparotomy on tumor progression was investigated. Especially the expression of several CXC chemokines was assayed, and its roles in regulating myeloid-derived suppressor cells (MDSCs) recruitment were analyzed. We found that laparotomy promoted in vivo tumor growth and angiogenesis. CXCL4 expression was significantly downregulated by laparotomy in the tumor tissue and the peritoneal cavity. Functionally, CXCL4 overexpression significantly reduces tumor volume compared to control. Through analysis of CD11b{sup +}/Gr1{sup +} MDSCs cell, we found an upregulated proportion of MDSCs in the tumor tissues and peritoneal cavity following laparotomy, and this enhancement was blocked after CXCL4 overexpression. Further, a negative correlation was found between CXCL4 expression and MDSC amounts in clinical samples. Higher CXCL4 expression and lower MDSCs proportion is positively related to overall survival.

60 APPLIED LIFE SCIENCES↗

Three-dimensional direct numerical simulation of a turbulent lifted hydrogen jet flame in heated coflow: flame stabilization and structure

Direct numerical simulation (DNS) of the near field of a three-dimensional spatially developing turbulent lifted hydrogen jet flame in heated coflow is performed with a detailed mechanism to determine the stabilization mechanism and the flame structure. The DNS was performed at a jet Reynolds number of 11,000 with over 940 million grid points. The results show that auto-ignition in a fuel-lean mixture at the flame base is the main source of stabilization of the lifted jet flame. A chemical flux analysis shows the occurrence of near-isothermal chemical chain branching preceding thermal runaway upstream of the stabilization point, indicative of hydrogen auto-ignition in the second limit. The Damköhler number and key intermediate-species behaviour near the leading edge of the lifted flame also verify that auto-ignition occurs at the flame base. At the lifted-flame base, it is found that heat release occurs predominantly through ignition in which the gradients of reactants are opposed. Downstream of the flame base, both rich-premixed and non-premixed flames develop and coexist with auto-ignition. In addition to auto-ignition, Lagrangian tracking of the flame base reveals the passage of large-scale flow structures and their correlation with the fluctuations of the flame base. In particular, the relative position of the flame base and the coherent flow structure induces a cyclic motion of the flame base in the transverse and axial directions about a mean lift-off height. This is confirmed by Lagrangian tracking of key scalars, heat release rate and velocity at the stabilization point.

Mechanics↗

Combined Experimental and Theoretical Investigations of n-Type BiFeO 3 for Use as a Photoanode in a Photoelectrochemical Cell

Combined experimental and theoretical investigations were performed to evaluate the potential of n-type BiFeO 3 as a photoanode. While previous experimental and theoretical studies on BiFeO 3 mainly focused on its ferroelectric properties, several studies have reported the advantages of BiFeO 3 as a photoelectrode for solar water splitting (e.g. bandgap energy and band edge positions relative to water reduction and oxidation potentials). However, the photoelectrochemical properties of n-type BiFeO 3 have not yet been thoroughly investigated. In our experimental investigation, we developed an electrodeposition-based synthesis to prepare uniform n-type BiFeO 3 thin-film electrodes. Furthermore, using a heat treatment under a N 2 environment, we intentionally introduced additional oxygen vacancies into the pristine n-type BiFeO 3 electrodes to increase the majority carrier density. The bandgaps, flatband potentials, photocurrent onset potentials, photocurrent generation, and photoelectrochemical stabilities of the pristine and N 2 -treated BiFeO 3 photoanodes were investigated comparatively to improve our understanding of BiFeO 3 photoanodes and to examine the effect of oxygen vacancies on the photoelectrochemical properties of BiFeO 3 . In our theoretical investigation, we performed first-principles calculations and demonstrated the formation of a small polaron when an extra electron was introduced into the BiFeO 3 lattice. Changes in electronic states cause by the small polaron formation were carefully investigated. We also examined the effects of oxygen vacancies on electron polaron formation and carrier concentration in BiFeO 3 . Using charge formation energy calculations and referencing charge transition levels to the free electron polaron level instead of to the conduction band minimum, we showed that the oxygen vacancy is capable of serving as a donor to enhance the carrier concentration of BiFeO 3 . Furthermore, our theoretical results agree well with our experimental findings. Together, the new experimental and theoretical results and discussion provided in this study have considerably improved our understanding of n-type BiFeO 3 as a photoanode.

25 ENERGY STORAGE↗

Molecular Catalysts with Diphosphine Ligands Containing Pendant Amines

Pendant amines play an invaluable role in chemical reactivity, especially for molecular catalysts based on Earth-abundant metals. As inspired by [FeFe]-hydrogenases, which contain a pendant amine positioned for cooperative bifunctionality, synthetic catalysts have been developed to emulate this multifunctionality through incorporation of a pendant amine in the second coordination sphere. Cyclic diphosphine ligands containing two amines serve as the basis for a class of catalysts that have been extensively studied and used to demonstrate the impact of a pendant base. These 1,5-diaza-3,7-diphosphacyclooctanes, now often referred to as “P 2 N 2 ” ligands, have profound effects on the reactivity of many catalysts. The resulting [Ni(P R 2 N R ´ 2 ) 2 ] 2+ complexes are electrocatalysts for both the oxidation and production of H 2 . Achieving the optimal benefit of the pendant amine requires that it has suitable basicity and is properly positioned relative to the metal center. In addition to the catalytic efficacy demonstrated with [Ni(P R 2 N R ´ 2 )2] 2+ complexes for the oxidation and production of H2, catalysts with diphosphine ligands containing pendant amines have also be demonstrated for a variety of metals for many different reactions, both in solution and immobilized on surfaces. Here, the impact of pendant amines in catalyst design has been demonstrated and continues to expand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic Structure Modification of Rectangular Phosphorene Quantum Dots Via Edge Passivation

Phosphorene is an elemental two-dimensional material that shows great promise as a metal-free photocatalyst owing to its high carrier mobility and direct band gap. Doping and edge functionalization of phosphorene can be exploited to tune its band gap and alter other properties. Herein, the electronic properties of a series of edge-passivated monolayer phosphorene quantum dots are investigated using an array of functional groups (OH, SH, NH 2 , SCH 3 , OCN, CN, and Cl) that are known to have electron-donating or electron-withdrawing capabilities. By employing density functional theory calculations, we demonstrate that edge functionalization can perturbatively shift the HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital) energy levels while simultaneously preserving the geometric structure and other favorable properties of pristine phosphorene. We use the average overall electrostatic potential of these systems to successfully predict the relative positioning of the HOMO and LUMO energy levels while presenting qualitative explanations on potential jumps introduced by the dipole layers formed due to edge functionalization. Furthermore, our results suggest that selective functionalization permits considerable control over the band edge positions, which could be utilized for applications in energy and optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Hybrid Quantum–Classical Study of Ion Adsorption at the Copper Electrode

Here, we present a set of computational studies that surveys the molecular structure and thermodynamics of simple ions at the electrode–electrolyte interface. A hybrid quantum–classical approach is used to obtain free energy profiles and solvent structure as a function of the ion’s position relative to the electrochemical liquid/solid interface and system potential. Model systems consist of a copper electrode and single halide or alkali metal ion in contact with an implicit solvent and reveal new insights into the interplay of forces that drive or resist ion absorption at the electrode/ electrolyte interface. We also expand on subtleties of absorption site preference and describe the complex relationship between the energetic barrier to absorption and the ion–electrode binding energy as a function of electrode potential.

36 MATERIALS SCIENCE↗

Electronic Structure of the Au Nanoparticle-TiO 2 Heterojunction: Influence of Nanoparticle Size, Shape, Oxygen Vacancies, and Temperature

The electronic structure of the gold nanoparticle-titanium dioxide (AuNP-TiO 2 ) heterojunction plays a critical role for charge transfer and recombination dynamics that underpin its photocatalytic function. However, building a representative model to capture the key physics remains a significant challenge. Here, we investigate the influence of the AuNP size and shape, as well as oxygen vacancy (V O ) defects at the anatase-phase TiO 2 (101) surface and the temperature of the heterojunction, on its interfacial electronic properties. Using density functional theory (DFT), we compare the closed-shell Au 20 and open-shell Au 19 clusters interfaced with pristine and V O defect TiO 2 surfaces. We find that the presence of a V O defect transforms pure TiO 2 from a p-type to an n-type semiconductor, reversing the interfacial band bending from downward to upward. For the heterosystem, density of states (DOS) analysis shows that V O minimally affects the open-shell Au 19 -TiO 2 system, but it significantly alters the closed-shell Au 20 -TiO 2 system, converting it from p-type to n-type at the Γ-point at 0 K. Furthermore, ab initio molecular dynamics (AIMD) simulations at 300 K reveal significant thermal fluctuations in AuNP positions relative to the TiO 2 surface. These fluctuations result in dynamic variations in the gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) in all systems studied: Au 19 NP-Pristine TiO 2 , Au 20 NP-Pristine TiO 2 , Au 19 NP-V O defect TiO 2 , and Au 20 NP-V O defect TiO 2 . Complementary Bader charge analysis performed at both 0 K and finite-temperature AIMD snapshots supports the emergence of an upward band bending and the formation of a Schottky barrier at the V O containing heterojunctions. Notably, we find that at finite temperature, an Au atom can dynamically passivate the V O , leading to a pronounced widening of the HOMO-LUMO gap in the AuNP-V O defect TiO 2 heterojunctions. Our computational findings underscore the pivotal role of the V O defect and thermal effects in modulating interfacial band alignment, electronic states, and HOMO-LUMO gaps, providing insights for designing Au-TiO 2 heterojunctions with tailored electronic properties.

Mora Perez, Carlos [Lawrence Berkeley National Lab↗

Iron-Based Perovskites for Catalyzing Oxygen Evolution Reaction

The slow kinetics of the oxygen evolution reaction (OER) is the main cause of energy loss in many low-temperature energy storage techniques, such as metal–air batteries and water splitting. A better understanding of both the OER mechanism and the degradation mechanism on different transition metal (TM) oxides is critical for the development of the next generation of oxides as OER catalysts. In this paper, we systematically investigated the catalytic mechanism and lifetime of ABO 3-δ perovskite catalysts for the OER, where A = Sr or Ca and B = Fe or Co. During the OER process, the Fe-based AFeO 3-δ oxides with δ ≈ 0.5 demonstrate no activation of lattice oxygen or pH dependence of the OER activity, which is different from the SrCoO 2.5 with similar oxygen 2p-band position relative to the Fermi level. The difference was attributed to the larger changes in the electronic structure during the transition from the oxygen-deficient brownmillerite structure to the fully oxidized perovskite structure and the poor conductivity in Fe-based oxides, which hinders the uptake of oxygen from the electrolyte to the lattice under oxidative potentials. The low stability of Fe-based perovskites under OER conditions in a basic electrolyte also contributes to the different OER mechanism compared with the Co-based perovskites. Finally, this work reveals the influence of TM composition and electronic structure on the catalytic mechanism and operational stability of the perovskite OER catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sub-1K Cold-Electron Quantum Well Switching at Room Temperature

Quantum states can provide means to systematically manipulate the transport of electrons. Here, in this study, we present electron transport across quasi-bound states of two heterogeneous quantum wells (QWs), where the transport of thermally excited electrons is blocked or enabled depending on the relative positions of the two quasi-bound states, with an abrupt current onset occurring when the two QW states align. The QW switch comprises a source (Cr), QW1 (Cr 2 O 3 ), QW2 (SnO x , x < 2), a tunneling barrier (SiO 2 ), and a drain (Si), where the effective electron mass of QW1 (m* QW1 ) is selected to be larger than QW2 (m* QW2 ). The current-voltage (I-V) measurements of the fabricated devices show abrupt current onsets, with the current transition occurring within 0.25 mV, corresponding to an effective electron temperature of 0.8 K at room temperature. Since transistor power consumption is fundamentally tied to effective electron temperature, this sub-1K cold-electron QW switching holds promise for highly energy-efficient computing.

Fermi−Dirac thermal smearing↗

Measuring Dipole Inversion in Self-Assembled Nano-Dielectric Molecular Layers

A self-assembled nanodielectric (SAND) is an ultrathin film, typically with periodic layer pairs of high-k oxide and phosphonic-acid-based $π$-electron (PAE) molecular layers. IPAE, having a molecular structure similar to that of PAE but with an inverted dipole direction, has recently been developed for use in thin-film transistors. In this paper we report that replacing PAE with IPAE in SAND-based thin-film transistors induces sizable threshold and turn-on voltage shifts, indicating the flipping of the built-in SAND polarity. The bromide counteranion (Br–) associated with the cationic stilbazolium portion of PAE or IPAE is of great importance, because its relative position strongly affects the electric dipole moment of the organic layer. Hence, a set of X-ray synchrotron measurements were designed and performed to directly measure and compare the Br– distributions within the PAE and IPAE SANDs. Two trilayer SANDs, consisting of a PAE or IPAE layer sandwiched between an HfOx and a ZrOx layer, were deposited on the SiOx surface of Si substrates or periodic Si/Mo multilayer substrates for X-ray reflectivity and X-ray standing wave measurements, respectively. Along with complementary DFT simulations, the spacings, elemental (Hf, Br, and Zr) distributions, molecular orientations, and Mulliken charge distributions of the PAE and IPAE molecules within each of the SAND trilayers were determined and correlated with the dipole inversion.

36 MATERIALS SCIENCE↗

Dual Atomic Coherence in the Self-Assembly of Patchy Heterostructural Nanocrystals

Advances in the synthesis and self-assembly of nanocrystals have enabled researchers to create a plethora of different nanoparticle superlattices. But while many super lattices with complex types of translational order have been realized, rotational order of nanoparticle building blocks within the lattice is more difficult to achieve. Self-assembled superstructures with atomically coherent nanocrystal lattices, which are desirable due to their exceptional electronic and optical properties, have been fabricated only for a few selected systems. Here, we combine experiments with molecular dynamics (MD) simulations to study the self-assembly of heterostructural nanocrystals (HNCs), consisting of a near-spherical quantum dot (QD) host decorated with a small number of epitaxially grown gold nanocrystal (Au NC) "patches ". Self-assembly of these HNCs results in face-centered-cubic (fcc) superlattices with well-defined orientational relationships between the atomic lattices of both QD hosts and Au patches. MD simulations indicate that the observed dual atomic coherence is linked to the number, size, and relative positions of gold patches. Here this study provides a strategy for the design and fabrication of NC superlattices with large structural complexity and delicate orientational order.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Depth-Resolved X-Ray Nanoimaging of Coherent and Incoherent Energy Transport in Silicon Carbide

Understanding lattice dynamics is crucial for optimizing the process of creating functional structures, such as laser writing of color-center defects. However, existing structural probes have difficulty measuring structural dynamics with submicrometer depth sensitivity. Here, in this study, a depth-resolved ultrafast X-ray nanodiffraction technique is developed to track the lattice dynamics of silicon carbide (SiC) in three dimensions. Upon laser excitation of an aluminum layer that acts as a heat and strain transducer, a specular Bragg peak of SiC shows an overall increase in the X-ray diffraction intensity rather than a peak shift. The relaxation dynamics of the increased intensity are significantly different when probed on and off the Bragg peak. The fast subnanosecond relaxation probed at the maximum of the Bragg peak is a result of the propagation of a coherent strain wave along the depth direction, while a slow relaxation probed at the wings of the Bragg peak reflects a localized incoherent lattice heating. To further visualize these processes, spatiotemporal maps were obtained by scanning the relative position and delay between the laser pump and X-ray probe beams, which capture the propagation of the strain wave, as well as a stationary structural distortion close to the aluminum/SiC interface. These depth-resolved structural measurements disentangle energy dissipation mechanisms in laser-excited SiC, and they open opportunities for finer control of, for example, the formation of optically addressable defect complexes central to quantum information applications.

X-ray nanodiffraction↗

Defect Annihilation Pathways in Directed Assembly of Lamellar Block Copolymer Thin Films

Defects in highly ordered self-assembled block copolymers represent an important roadblock toward the adoption of these materials in a wide range of applications. This work examines the pathways for annihilation of defects in symmetric diblock copolymers in the context of directed assembly using patterned substrates. Past theoretical and computational studies of such systems have predicted minimum free energy pathways that are characteristic of an activated process. However, they have been limited to adjacent dislocations with opposite Burgers vectors. By relying on a combination of advanced sampling techniques and particle-based simulations, this work considers the long-range interaction between dislocation pairs, both on homogeneous and nanopatterned substrates. As illustrated here, these interactions are central to understanding the defect structures that are most commonly found in applications and in experimental studies of directed self-assembly. More specifically, it is shown that, for dislocation dipoles separated by several lamellae, multiple consecutive free energy barriers lead to effective kinetic barriers that are an order of magnitude larger than those originally reported in the literature for tightly bound dislocation pairs. Furthermore, it is also shown that annihilation pathways depend strongly on both the separation between dislocations and their relative position with respect to the substrate guiding stripes used to direct the assembly.

36 MATERIALS SCIENCE↗

The Nanoscale Implications of a Molecular Gas Beam during Electron Beam Induced Deposition

Here we report that the gas flux direction in focused electron beam induced processes can strongly destabilize the morphology on the nanometer scale. We demonstrate how pattern parameters such as position relative to the gas nozzle, axial rotation, scanning direction, and patterning sequence result in different growth modes for identical structures. This is mainly caused by nanoscale geometric shadowing, particularly when shadowing distances are comparable to surface diffusion lengths of (CH 3 ) 3 -Pt-CpCH 3 adsorbates. Furthermore, two different adsorbate replenishment mechanisms exist and are governed by either surface diffusion or directional gas flux adsorption. The experimental study is complemented by calculations and dynamic growth simulations which successfully emulate the observed morphology instabilities and support the proposed growth model.

36 MATERIALS SCIENCE↗

Facile Rearrangement of 3-Oxoalkyl Radicals is Evident in Low-Temperature Gas-Phase Oxidation of Ketones

The pulsed photolytic chlorine-initiated oxidation of methyl-tert-butyl ketone (MTbuK), di-tert-butyl ketone (DTbuK), and a series of partially deuterated diethyl ketones (DEK) is studied in the gas phase at 8 Torr and 550–650 K. Products are monitored as a function of reaction time, mass, and photoionization energy using multiplexed photoionization mass spectrometry with tunable synchrotron ionizing radiation. The results establish that the primary 3-oxoalkyl radicals of those ketones, formed by abstraction of a hydrogen atom from the carbon atom in γ-position relative to the carbonyl oxygen, undergo a rapid rearrangement resulting in an effective 1,2-acyl group migration, similar to that in a Dowd–Beckwith ring expansion. Without this rearrangement, peroxy radicals derived from MTbuK and DTbuK cannot undergo HO2 elimination to yield a closed-shell unsaturated hydrocarbon coproduct. However, not only are these coproducts observed, but they represent the dominant oxidation channels of these ketones under the conditions of this study. For MTbuK and DTbuK, the rearrangement yields a more stable tertiary radical, which provides the thermodynamic driving force for this reaction. Even in the absence of such a driving force in the oxidation of partially deuterated DEK, the 1,2-acyl group migration is observed. Quantum chemical (CBS-QB3) calculations show the barrier for gas-phase rearrangement to be on the order of 10 kcal mol–1. The MTbuK oxidation experiments also show several minor channels, including β-scission of the initial radicals and cyclic ether formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

“Roller-Wheel”-Type Pt-Containing Small Molecules and the Impact of “Rollers” on Material Crystallinity, Electronic Properties, and Solar Cell Performance

We report the synthesis, characterization, and detailed comparison of a series of novel Pt-bisacetylide containing conjugated small molecules possessing an unconventional “roller-wheel” shaped structure that is distinctly different from the “dumbbell” designs in traditional Pt-bisacetylide containing conjugated polymers and small molecules. The relationships between the chemical nature and length of the “rollers” and the electronic and physical properties of the materials are carefully studied by steady-state spectroscopy, cyclic voltammetry, differential scanning calorimetry, single-crystal X-ray diffraction, transient absorption spectroscopy, theoretical calculation, and device application. It was revealed that if the roller are long enough, these molecules can “slip-stack” in the solid state, leading to high crystallinity and charge mobility. Organic solar cells were fabricated and showed power conversion efficiencies up to 5.9%, out-performing all existing Pt-containing materials. The device performance was also found to be sensitive to optimization conditions and blend morphologies, which are a result of the intricate interplay among materials crystallinity, phase separation, and the relative positions of the lowest singlet and triplet excited states.

36 MATERIALS SCIENCE↗

Probing O–H Bonding through Proton Detected 1 H– 17 O Double Resonance Solid-State NMR Spectroscopy

The ubiquity of oxygen in organic, inorganic, and biological systems has stimulated the application and development of 17 O solid-state NMR spectroscopy as a probe of molecular structure and dynamics. Unfortunately, 17 O solid-state NMR experiments are often hindered by a combination of broad NMR signals and low sensitivity. Here, it is demonstrated that fast MAS and proton detection with the D-RINEPT pulse sequence can be generally applied to enhance the sensitivity and resolution of 17 O solid-state NMR experiments. Complete 2D 17 O → 1 H D-RINEPT correlation NMR spectra were typically obtained in less than 10 h from less than 10 mg of material, with low to moderate 17 O enrichment (less than 20%). Two-dimensional 1 H– 17 O correlation solid-state NMR spectra allow overlapping oxygen sites to be resolved on the basis of proton chemical shifts or by varying the mixing time used for 1 H– 17 O magnetization transfer. In addition, J-resolved or separated local field (SLF) blocks can be incorporated into the D-RINEPT pulse sequence to allow the direct measurement of one-bond 1 H– 17 O scalar coupling constants ( 1 J OH ) or 1 H– 17 O dipolar couplings (D OH ), respectively, the latter of which can be used to infer 1 H– 17 O bond lengths. 1 J OH and D OH calculated from plane-wave density functional theory (DFT) show very good agreement with experimental values. Therefore, the 2D 1 H– 17 O correlation experiments, 1 H– 17 O scalar and dipolar couplings, and plane-wave DFT calculations provide a method to precisely determine proton positions relative to oxygen atoms. This capability opens new opportunities to probe interactions between oxygen and hydrogen in a variety of chemical systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗