Search NASA⌕ Search

SEARCH · Search NASA

Results for “Science activities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Development of nano-structured duplex and ferritic stainless steels by pulverisette planetary milling followed by pressureless sintering

Nano-structured duplex and ferritic stainless steel powders are prepared by planetary milling of elemental Fe, Cr and Ni powder for 40 h and then consolidated by conventional pressureless sintering. The progress of milling and the continuous refinement of stainless steel powders have been confirmed by means of X-ray diffraction and scanning electron microscopy. Activation energy for the formation of duplex and ferritic stainless steels is calculated by Kissinger method using differential scanning calorimetry and is found to be 159.24 and 90.17 KJ/mol respectively. Both duplex and ferritic stainless steel powders are consolidated at 1000, 1200 and 1400 °C in argon atmosphere to study microstructure, density and hardness. Maximum sintered density of 90% and Vickers microhardness of 550 HV are achieved for duplex stainless steel sintered at 1400 °C for 1 h. Similarly, 92% sintered density and 263 HV microhardness are achieved for ferritic stainless steel sintered at 1400 °C. - Highlights: • Synthesized duplex and ferritic stainless steels by pulverisette planetary milling • Calculated activation energy for the formation of duplex and ferritic stainless steels • Studied the effect of sintering temperature on density, hardness and microstructure • Duplex stainless steel exhibits 90% sintered density and microhardness of 550 HV. • Ferritic stainless steel shows 92% sintered density and 263 HV microhardness.

36 MATERIALS SCIENCE↗

Structural characteristics, sinterability and electrical conductivity of Ba-site non-stoichiometric Ba{sub x}Ce{sub 0.50}Zr{sub 0.40}Y{sub 0.10}O{sub 3-{delta}}

The influence of barium content on the structural characteristics, sinterability and electrical conductivity of proton conductor Ba{sub x}Ce{sub 0.50}Zr{sub 0.40}Y{sub 0.10}O{sub 3-{delta}} (x = 0.95, 0.97, 1.00, 1.03, 1.05) is investigated. Compositions with barium deficiency show the presence of fluorite precipitate detected by powder X-ray diffraction, whilst pure perovskite phase is present for other samples. Barium deficiency promotes the densification process of the samples. The electrical conductivity of Ba{sub x}Ce{sub 0.50}Zr{sub 0.40}Y{sub 0.10}O{sub 3-{delta}} increases with barium content, which is mainly ascribed to the decreased activation energy due to the increasing lattice volume, especially for the case in wet 5% H{sub 2}/Ar. The present results suggest that it is very important to control the stoichiometry of cations to obtain desirable perovskite type high temperature proton conductors.

36 MATERIALS SCIENCE↗

Deep levels in H-irradiated GaAs{sub 1-x}N{sub x} (x < 0.01) grown by molecular beam epitaxy

Dilute nitride GaAs{sub 1-x}N{sub x} layers have been grown by molecular beam epitaxy with nitrogen concentration ranging from 0.2% to 0.8%. These samples have been studied before and after hydrogen irradiation by using standard deep level transient spectroscopy (DLTS) and high resolution Laplace DLTS techniques. The activation energy, capture cross section and density of the electron traps have been estimated and compared with results obtained in N-free as-grown and H-irradiated bulk GaAs.

36 MATERIALS SCIENCE↗

Stress relaxation behavior of nanocluster-strengthened ferritic alloy at high temperatures

Stress relaxation behavior was investigated for the nanoclusters/dispersoids-strengthened steels including the nanostructured ferritic alloy 14YWT (SM10), oxide-dispersion strengthened (ODS) Eurofer97, and commercial ODS steel PM2000. The stress relaxation tests were carried out at high temperatures ranging from 600 to 1000 degrees C. Overall, the relaxation rates of 14YWT and ODS-Eurofer97 were lower than that of PM2000. To analyze the strain rate sensitivity of the alloys, the load drop-time curves were converted to the stress-strain rate curves. In the log-log plots of these curves, no significant change in slope was observed in the strain rate range of 2 x 10(-5)-1 x 10(-3)s(-1). At 600 degrees C, 14YWT and ODS-Eurofer97 have similar activation values of similar to 50b(3) while PM2000 has similar to 100b(3). Above 700 degrees C, the differences of the activation energy among alloys become more noticeable with increasing temperature. The activation energies of the three alloys were derived and compared. The rate-controlling mechanisms in the stress relaxation of the three nanoclusters/dispersoids-hardened alloys include dislocation glide and climb, and further study is necessary to clarify detailed contributing mechanisms.

36 MATERIALS SCIENCE↗

Crystallization kinetics and thermal properties of 20Li{sub 2}O-80TeO{sub 2} glass

In this work, X-ray diffraction, Raman spectroscopy and differential scanning calorimetry techniques were used to understand the crystallization process on 20Li{sub 2}O-80TeO{sub 2} glass. X-ray diffraction results reveal the presence of three distinct alpha {gamma}-TeO{sub 2}, {alpha}-TeO{sub 2} and {alpha}-Li{sub 2}Te{sub 2}O{sub 5} crystalline phases in the glass matrix. The Raman spectroscopy band structure of this glass is similar to the one observed in glassy TeO{sub 2}. Raman results clearly reveal the metastable character of the {gamma}-TeO{sub 2} phase in the 20Li{sub 2}O-80TeO{sub 2} glass, whose associated vibration modes disappear completely at temperatures higher than 315 deg. C. On the other hand, the Raman modes associated to {alpha}-TeO{sub 2} and {alpha}-Li{sub 2}Te{sub 2}O{sub 5} phases persists up to temperatures close to the final stages of the crystallization in the studied glass (around 420 deg. C). From DSC measurements, the activation energies 296 {+-} 3 and 298 {+-} 1 kJ mol{sup -1} were associated to {gamma}-TeO{sub 2} and {alpha}-TeO{sub 2} phases crystallization, indicating that these phases crystallizes at temperatures very close in the studied glass.

36 MATERIALS SCIENCE↗

Synthesis, electrical and dielectric characterization of cerium doped nano copper ferrites

Graphical abstract: Lattice constant (a) and activation energy (Ea) as a function of Ce (cerium) content. - Highlights: • The simple and economic method has been adopted for the synthesis of nanoferrites. • The electrical resistivity increases with cerium concentration. • DC electrical resistivity of these materials favours their use in microwave devices. • Dielectric measurements show semiconductor nature of the synthesized ferrites. - Abstract: The nanosized CuFe{sub 2−x}Ce{sub x}O{sub 4} (x = 0.0, 0.2, 0.4, 0.6, 0.8) ferrites doped with cerium are synthesized by chemical co-precipitation method. The synthesized materials are characterized by XRD, FTIR, TGA and SEM. XRD analysis of cerium substituted copper ferrites confirms the cubic spinel structure. The average crystallite size calculated by using Scherrer's formula ranges from 37 to 53 nm. The values of cell constant and cell volume vary with the dopant concentration. These variations can be explained in terms of their ionic radii. The DC electrical resistivity, measured by two point probe method, increases with increase in dopant concentration while it decreases with rise in temperature exhibiting semiconductor behaviour. Energy of activation of these ferrites is calculated by using Arrhenius type resistivity plots. Dielectric measurements of the synthesized compounds show exponential decrease in dielectric constant and dielectric loss factor with increase in frequency. This indicates the normal dielectric behaviour of ferrites.

36 MATERIALS SCIENCE↗

Oxygen migration enthalpy likely limits oxide precipitate dissolution during tabula rasa

In industrial silicon solar cells, oxygen-related defects lower device efficiencies by up to 20% (rel.). In order to mitigate these defects, a high-temperature homogenization anneal called tabula rasa (TR) that has been used in the electronics industry is now proposed for use in solar-grade wafers. This work addresses the kinetics of tabula rasa by elucidating the activation energy governing oxide precipitate dissolution, which is found to be 2.6 ± 0.5 eV. This value is consistent within uncertainty to the migration enthalpy of oxygen interstitials in silicon, implying TR to be kinetically limited by oxygen point-defect diffusion. Furthermore, this large activation energy is observed to limit oxygen precipitate dissolution during standard TR conditions, suggesting that more aggressive annealing conditions than conventionally used are required for complete bulk microdefect mitigation.

14 SOLAR ENERGY↗

An adenosine triphosphate-independent proteasome activator contributes to the virulence of Mycobacterium tuberculosis

Mycobacterium tuberculosis encodes a proteasome that is highly similar to eukaryotic proteasomes and is required to cause lethal infections in animals. The only pathway known to target proteins for proteasomal degradation in bacteria is pupylation, which is functionally analogous to eukaryotic ubiquitylation. However, evidence suggests that the M. tuberculosis proteasome contributes to pupylation-independent pathways as well. To identify new proteasome cofactors that might contribute to such pathways, we isolated proteins that bound to proteasomes overproduced in M. tuberculosis and found a previously uncharacterized protein, Rv3780, which formed rings and capped M. tuberculosis proteasome core particles. Rv3780 enhanced peptide and protein degradation by proteasomes in an adenosine triphosphate (ATP)-independent manner. We identified putative Rv3780-dependent proteasome substrates and found that Rv3780 promoted robust degradation of the heat shock protein repressor, HspR. Importantly, an M. tuberculosis Rv3780 mutant had a general growth defect, was sensitive to heat stress, and was attenuated for growth in mice. Collectively, these data demonstrate that ATP-independent proteasome activators are not confined to eukaryotes and can contribute to the virulence of one the world’s most devastating pathogens.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of magnetic fields on spin glass dynamics

The effects of a magnetic field on spin glass dynamics are explored for a Cu 0.887 Mn 0.113 thin film of thickness L = 20 nm in a multilayer configuration. An experimental protocol removes uncertainties associated with the time dependence of the field-cooled magnetization M FC (t,T). Activated dynamics is exhibited after the spin glass correlation length ξ(t,T) has reached L, creating a quasiequilibrium state. Here, the activation energy depends upon the strength of the magnetic field H. The magnitude of the activation energy diminishes as H 2 , the coefficient of which is proportional to the number of correlated spins. A quantitative fit requires a “pancakelike” correlated region, associated with the T = 0 phase transition for a spin glass in D = 2 dimensions.

36 MATERIALS SCIENCE↗

Observation of localized centers with anomalous behavior in light-emitting heterostructures with multiple InGaN/GaN quantum wells

For the first time, using a complex of admittance spectroscopy, light-emitting heterostructures with InGaN/GaN multiple quantum wells were studied in a wide temperature range of 6-300 K. Three peaks are found in the conductance spectra; these peaks correspond to emission of charge carriers from the quantum wells and point defects distributed in the semiconductor bulk. Two low-temperature peaks possess an anomalous behavior, specifically, the peak with a low value of apparent activation energy (17 meV) is shifted to higher temperatures compared with the higher-energy peak (30 meV). The latter is attributed to a bulk defect having anomalously large capture cross section {sigma}{sub n} = 1.5 x 10{sup -11} cm{sup 2}.

36 MATERIALS SCIENCE↗

On the thermal stability of graphone

Molecular dynamics simulation is used to study thermally activated migration of hydrogen atoms in graphone, a magnetic semiconductor formed of a graphene monolayer with one side covered with hydrogen. The temperature dependence of the characteristic time of disordering of graphone via hopping of hydrogen atoms to neighboring carbon atoms is established directly. The activation energy of this process is determined at E{sub a} = (0.05 {+-} 0.01) eV. The small value of E{sub a} is indicative of the extremely low thermal stability of graphone. The low stability presents a serious handicap for practical use of the material in nanoelectronics.

36 MATERIALS SCIENCE↗

Low-temperature conductivity in CuGaS{sub 2} single crystals

CuGaS{sub 2} single crystals are grown by the Bridgman-Stockbarger method. X-ray diffraction and Raman studies are performed. It is shown that the conductivity at low temperatures has an activation mechanism: in the range of 100–300 K, impurity conduction with an acceptor activation energy of 12 meV dominates; at temperatures below 100 K, Mott conductivity, i.e., so-called hopping conductivity with a variable hop length prevails. The density of localized states and the average carrier hop length are estimated.

36 MATERIALS SCIENCE↗

Activation Energy of Tantalum-Tungsten Oxide Thermite Reaction

The activation energy of a high melting temperature sol-gel (SG) derived tantalum-tungsten oxide thermite composite was determined using the Kissinger isoconversion method. The SG derived powder was consolidated using the High Pressure Spark Plasma Sintering (HPSPS) technique to 300 and 400 C to produce pellets with dimensions of 5 mm diameter by 1.5 mm height. A custom built ignition setup was developed to measure ignition temperatures at high heating rates (500-2000 C {center_dot} min{sup -1}). Such heating rates were required in order to ignite the thermite composite. Unlike the 400 C samples, results show that the samples consolidated to 300 C undergo an abrupt change in temperature response prior to ignition. This change in temperature response has been attributed to the crystallization of the amorphous WO{sub 3} in the SG derived Ta-WO{sub 3} thermite composite and not to a pre-ignition reaction between the constituents. Ignition temperatures for the Ta-WO{sub 3} thermite ranged from approximately 465-670 C. The activation energy of the SG derived Ta-WO{sup 3} thermite composite consolidated to 300 and 400 C were determined to be 37.787 {+-} 1.58 kJ {center_dot} mol{sup -1} and 57.381 {+-} 2.26 kJ {center_dot} mol{sup -1}, respectively.

36 MATERIALS SCIENCE↗

STS-107 Microgravity Environment Summary Report

This summary report presents the results of the processed acceleration data measured aboard the Columbia orbiter during the STS-107 microgravity mission from January 16 to February 1, 2003. Two accelerometer systems were used to measure the acceleration levels due to vehicle and science operations activities that took place during the 16-day mission. Due to lack of precise timeline information regarding some payload's operations, not all of the activities were analyzed for this report. However, a general characterization of the microgravity environment of the Columbia Space Shuttle during the 16-day mission is presented followed by a more specific characterization of the environment for some designated payloads during their operations. Some specific quasi-steady and vibratory microgravity environment characterization analyses were performed for the following payloads: Structure of Flame Balls at Low Lewis-number-2, Laminar Soot Processes-2, Mechanics of Granular Materials-3 and Water Mist Fire-Suppression Experiment. The Physical Science Division of the National Aeronautics and Space Administration sponsors the Orbital Acceleration Research Experiment and the Space Acceleration Measurement System for Free Flyer to support microgravity science experiments, which require microgravity acceleration measurements. On January 16, 2003, both the Orbital Acceleration Research Experiment and the Space Acceleration Measurement System for Free Flyer accelerometer systems were launched on the Columbia Space Transportation System-107 from the Kennedy Space Center. The Orbital Acceleration Research Experiment supported science experiments requiring quasi-steady acceleration measurements, while the Space Acceleration Measurement System for Free Flyer unit supported experiments requiring vibratory acceleration measurement. The Columbia reduced gravity environment analysis presented in this report uses acceleration data collected by these two sets of accelerometer systems: The Orbital Acceleration Research Experiment is a low frequency sensor, which measures acceleration up to 1 Hz, but the 1 Hz acceleration data is trimmean filtered to yield much lower frequency acceleration data up to 0.01 Hz. This filtered data can be mapped to other locations for characterizing the quasi-steady environment for payloads and the vehicle. The Space Acceleration Measurement System for Free Flyer measures vibratory acceleration in the range of 0.01 to 200 Hz at multiple measurement locations. The vibratory acceleration data measured by this system is used to assess the local vibratory environment for payloads as well as to measure the disturbance causes by the vehicle systems, crew exercise devices and payloads operation disturbances. This summary report presents analysis of selected quasi-steady and vibratory activities measured by these two accelerometers during the Columbia 16-day microgravity mission from January 16 to February 1, 2003.

Jules, Kenol↗

NCSE's 13th National Conference on Disasters and Environment: Science, Preparedness and Resilience, Post Conference Follow-up Activities and Dissemination

The National Council for Science and the Environment (NCSE) received $15,000 from the US Department of Energy to support post-conference activities of the 13th National Conference on the theme of Disasters and the Environment: Science, Preparedness and Resilience, held on January 15-17, 2013 at the Ronald Reagan Building and International Trade Center in Washington, DC. Over 1,000 participants from the scientific, emergency response, policy, conservation, and business communities, as well as federal and local government officials, and international entities attended the event. The conference developed actionable outcomes that constructively advance the science behind decision-making on environmental disasters, with an intended result of more prepared and resilient communities in light of a changing climate. Disasters and Environment topic was addressed through six organizing themes: Cascading Disasters; Intersection of the Built and Natural Environments; Disasters as Mechanisms of Ecosystem Change; Rethinking Recovery and Expanding the Vision of Mitigation; Human Behavior and its Consequences; and "No Regrets" Resilience. The program featured eight plenary sessions, 24 symposia and 23 breakout workshops and addressed pivotal issues surrounding disasters and environment including lifeline services, the energy, climate, hazard nexus, grid collapse, community vulnerability, and natural resource management. Sessions, symposia and workshops were conducted by over 200 distinguished thought leaders, scientists, government officials, policy experts and international speakers throughout the three day event. Following the conference, NCSE prepared a set of recommendations and results from the workshops and disseminated the results to universities, organizations and agencies, the business community. NCSE’s national dissemination involved organized several targeted trips and meetings to disseminate significant findings to key stakeholder groups.

99 GENERAL AND MISCELLANEOUS↗

Non-radiative luminescence decay with self-trapped hole migration in strontium titanate: Interplay between optical and transport properties

A novel model for the non-radiative decay of self-trapped excitons (STEs) in the advanced functional oxide SrTiO3 is proposed and supported by experimental observations. The study is based on the initial ionoluminescence stage for STE emission at 2.5 eV, and its dependence on temperature and electronic excitation rate under energetic heavy-ion irradiation. For all temperatures, this initial stage reaches rapidly a quasi-steady level, and then decreases as induced-structural damage increases. The quasi-steady luminescence exhibits a linear dependence on the excitation rate, suggesting a constant efficiency for STEs formation. An activation energy of 55 meV, essentially independent of the incident ion mass and energy of projectile-ion, is deduced from an Arrhenius-type relationship with irradiation temperature. This energy is in good agreement with experimental values, measured for non-radiative STE decay under ns-laser pulse excitation, and reasonably consistent with density functional theory calculations for migration of self-trapped holes (STHs) described by a small-polaron adiabatic hopping model. A new mechanism dealing with a non-radiative contribution to the STE transition is discussed, consisting of STH migration through thermally-activated hopping and annihilation with the STE-electron. Luminescence kinetics from the chromium intrinsic impurity strongly supports this model, being consistent with the annihilation of Cr 3+ centers through recombination with migrating STHs.

luminescence↗

Resveratrol-induced transcriptional up-regulation of ASMase (SMPD1) of human leukemia and cancer cells

Resveratrol (RSV) is a plant-derived phytoalexin present in plants, whose pleiotropic effects for health benefits have been previously reported. Its anti-cancer activity is among the current topics for novel cancer treatment. Here, effects of RSV on cell proliferation and the sphingolipid metabolism of K562, a human leukemia cell line, were analyzed. Some experiments were also performed in HCT116, a human colon cancer cell line. RSV inhibited cell proliferation of both cell lines. Increased cellular ceramide and decreased sphingomyelin and S1P by RSV were observed in RSV-treated K562 cells. Further analysis revealed that acid sphingomyelinase mRNA and enzyme activity levels were increased by RSV. Desipramine, a functional ASMase inhibitor, prevented RSV-induced ceramide increase. RSV increased ATF3, EGR1, EGR3 proteins and phosphorylated c-Jun and FOXO3. However, co-transfection using these transcription factor expression vectors and ASMase promoter reporter vector revealed positive effects of EGR1 and EGR3 but not others. Electrophoresis mobility shift assay (EMSA) and Chromatin immunoprecipitation (ChIP) assay demonstrated the direct binding of EGR1/3 transcription factors with ASMase 5′-promoter. These results indicate that increased EGR1/3 and ASMase expression play an important role in cellular ceramide increase by RSV treatment. - Highlights: • Resveratrol inhibited cell proliferation of K562 and HCT116 cells. • Resveratrol increased cellular ceramide and decreased sphingomyelin and S1P. • ASMase mRNA and activity were increased with resveratrol. • ASMase inhibition suppressed RSV-induced ceramide accumulation. • Increased ASMase transcription was at least partially due to EGR family proteins.

60 APPLIED LIFE SCIENCES↗

Activation energy of tantalum-tungsten oxide thermite reactions

The activation energy of a sol-gel (SG) derived tantalum-tungsten oxide thermite composite was determined using the Kissinger isoconversion method. The SG derived powder was consolidated using the high-pressure spark plasma sintering (HPSPS) technique at 300 and 400 C. The ignition temperatures were investigated under high heating rates (500-2000 C min{sup -1}). Such heating rates were required in order to ignite the thermite composite. Samples consolidated at 300 C exhibit an abrupt change in temperature response prior to the main ignition temperature. This change in temperature response is attributed to the crystallization of the amorphous WO{sub 3} in the SG derived Ta-WO{sub 3} thermite composite and not to a pre-ignition reaction between the constituents. Ignition temperatures for the Ta-WO{sub 3} thermite ranged from approximately 465 to 670 C. The activation energies of the SG derived Ta-WO{sub 3} thermite composite consolidated at 300 and 400 C were determined to be 38{+-} 2 kJ mol{sup -1} and 57 {+-} 2 kJ mol{sup -1}, respectively. (author)

36 MATERIALS SCIENCE↗