Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sensitive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

The sensitivity of a model of the ambient stratosphere to empirical inputs

The usefulness of a general application of sensitivity studies to the modeling of the ambient stratosphere using the GSFC steady-state photochemistry model is examined. The comparison of theoretical model results with field measurements of trace species is used to assess the applicability of the model to the stratosphere, to help determine the eddy diffusion profile, and to validate mechanisms within the photochemistry of the model. Specific examples of each are discussed and the results of a comprehensive sensitivity study used to elucidate certain points about the comparison are analyzed.

Butler, D. M.↗

Radiation sensitivity of quartz crystal oscillators experiment for the Long Duration Exposure Facility /LDEF/

A proposed experiment, which has been selected by NASA for inclusion in the Long Duration Exposure Facility (LDEF), is discussed. The objective of the experiment is to obtain information relevant to predicting and improving the radiation sensitivity of quartz oscillators. Specifically, the effect of exposing various grades of quartz oscillators to an orbital environment will be compared with observations obtained using the transmission electron microscope which suggest that the technique may be used to classify quartz-crystals according to their radiation sensitivity.

Venables, J. D.↗

Kinetics of hydrogen-oxygen and methane-oxygen ignition sensitized by NO or NO2

In a study of methane ignition sensitized by NO2, the induction period chemical kinetics were examined by monitoring reactants and intermediates (CH4, NO2, OH, NO, CO, CO2, and H2O) prior to ignition. Data were obtained at pressure of 2-4 atm, temperatures of 1300-1900 K, equivalence ratios of 0.5-1.0, and NO2 up to 3.4 mole %. A tentative NO2 sensitization mechanism was deduced from the analysis of photometric observations and the comparison of computer modeling with observations.

Slack, M. W.↗

A sensitivity analysis for the F100 turbofan engine using the multivariable Nyquist array

In the feedback control design of multivariable systems, closed loop performance evaluations must include the dynamic behavior of variables unavailable to the feedback controller. For the multivariable Nyquist array method, a set of sensitivity functions are proposed to simplify the adjustment of compensator parameters when the dynamic response of the unmeasurable output variables is unacceptable. A sensitivity study to improve thrust and turbine temperature responses for the Pratt-Whitney F100 turbofan engine demonstrates the utility of the proposed method.

Leininger, G. G.↗

Differences between seasonal and mean annual energy balance model calculations of climate and climate sensitivity

The paper extends a simple Budyko-Sellers mean annual energy balance climate model with diffusive transport to include a seasonal cycle. In the model the latitudinal distribution of the zonal average surface temperature is represented by Legendre polynomials and its time-dependence by a Fourier sine-cosine series, and it has three parameters adjusted so that the observed amplitudes of the Northern Hemisphere zonal mean surface temperature are recovered. The seasonal model is used to reveal how the annual mean climate and the sensitivity to changes in incident radiation differ from the predictions obtained with the corresponding mean annual model. The distribution of the incident solar radiation in the models is shown to be insensitive to changes in the eccentricity and the longitude of perihelion and sensitive only to changes in the obliquity of the earth, and for past orbital changes both the seasonal and the mean annual model fail to produce glacial advances of the magnitude that are thought to have occurred.

North, G. R.↗

Determination of noise equivalent reflectance for a multispectral scanner: A scanner sensitivity study

The methods used to calculate the sensitivity parameter noise equivalent reflectance of a remote-sensing scanner are explored, and the results are compared with values measured over calibrated test sites. Data were acquired on four occasions covering a span of 4 years and providing various atmospheric conditions. One of the calculated values was based on assumed atmospheric conditions, whereas two others were based on atmospheric models. Results indicate that the assumed atmospheric conditions provide useful answers adequate for many purposes. A nomograph was developed to indicate sensitivity variations due to geographic location, time of day, and season.

Gibbons, D. E.↗

Performance sensitivity analysis of Department of Energy-Chrysler upgraded automotive gas turbine engine, S/N 5-4

The performance sensitivity of a two-shaft automotive gas turbine engine to changes in component performance and cycle operating parameters was examined. Sensitivities were determined for changes in turbomachinery efficiency, compressor inlet temperature, power turbine discharge temperature, regenerator effectiveness, regenerator pressure drop, and several gas flow and heat leaks. Compressor efficiency was found to have the greatest effect on system performance.

Johnsen, R. L.↗

Notch sensitivity of space shuttle tile materials

Tests were conducted at room temperature to determine the notch sensitivity of the thermal protection tile for the space shuttle. Two types of RSI tile were studied: LI-900 and LI-2200. Three point bend specimens were cut from discarded tiles in the in-plane (ip) and through-the-thickness (ttt) directions. They were tested with or without a sharp notch. The LI-900 (ip and ttt) specimens were not very notch sensitive, but the LI-2200 (ip and ttt) specimens were. The LI-2200 material showed about a 35 percent reduction in strength due to the presence of the notch. This reduction in strength should be considered in the design of mechanically fastened tile concepts.

Newman, J. C., Jr.↗

Solution sensitivity and accuracy study of NASTRAN for large dynamic problems involving structural damping

Large dynamic problems involving NASTRAN SOLUTION 8 (i.e., the steady state dynamic response option wherein all response quantities vary as e sub i omega t, where omega is the driving frequency and t is time) are considered. Using a submerged steel plate with a viscoelastic layer layer as the bench mark sample, the solution sensitivity and solution accuracy are checked. The solution sensitivity is examined by running the same finite element model on different computers, different versions of NASTRAN, and different precision levels. The solution accuracy is evaluated for these same runs by comparing the NASTRAN results with the exact solution of the same problem.

Kalinowski, A. J.↗

A sensitivity analysis of volcanic aerosol dispersion in the stratosphere

A computer sensitivity analysis was performed to determine the uncertainties involved in the calculation of volcanic aerosol dispersion in the stratosphere using a 2 dimensional model. The Fuego volcanic event of 1974 was used. Aerosol dispersion processes that were included are: transport, sedimentation, gas phase sulfur chemistry, and aerosol growth. Calculated uncertainties are established from variations in the stratospheric aerosol layer decay times at 37 latitude for each dispersion process. Model profiles are also compared with lidar measurements. Results of the computer study are quite sensitive (factor of 2) to the assumed volcanic aerosol source function and the large variations in the parameterized transport between 15 and 20 km at subtropical latitudes. Sedimentation effects are uncertain by up to a factor of 1.5 because of the lack of aerosol size distribution data. The aerosol chemistry and growth, assuming that the stated mechanisms are correct, are essentially complete in several months after the eruption and cannot explain the differences between measured and modeled results.

Butler, C. F.↗

A high-sensitivity search for extraterrestrial intelligence at lambda 18 cm

A targeted high-sensitivity search for narrow-band signals near a wavelength of 18 cm has been conducted using the 91-m radiotelescope of the National Radio Astronomy Observatory. The search included 201 nearby solar-type stars and achieved a frequency resolution of 5.5 Hz over a 1.4-MHz bandwidth. This high spectral resolution was obtained through a non-real-time reduction procedure using a Mark I VLBI recording terminal in conjunction with the CDC 7600 computational facility at the NASA-Ames Research Center. This is the first high-resolution search for narrow-band signals in this wavelength regime. To date it is the most sensitive search per unit observing time of any search strategy which does not postulate a unique magic frequency. Data show no evidence for narrow-band signals due to extraterrestrial intelligence at a 12-standard-deviation upper limit on signal strength of 1.1 x 10 to the -23rd W/sq m.

Tarter, J.↗

High sensitivity pulse-counting mass spectrometer system for noble gas analysis

A pulse-counting mass spectrometer is described which is comprised of a new ion source of cylindrical geometry, with exceptional optical properties (the Baur source), a dual focal plane externally adjustable collector slits, and a 17-stage Allen-type electron multiplier, all housed in a metal 21 cm radius, 90 deg magnetic sector flight tube. Mass discrimination of the instrument is less than 1 per mil per mass unit; the optical transmission is more than 90%; the source sensitivity (Faraday collection) is 4 ma/torr at 250 micron emission; and the abundance sensitivity is 30,000.

Hohenberg, C. M.↗

Shock Sensitivity of energetic materials

Viscoplastic deformation is examined as the principal source of hot energy. Some shock sensitivity data on a proposed model is explained. A hollow sphere model is used to approximate complex porous matrix of energetic materials. Two pieces of shock sensitivity data are qualitatively compared with results of the proposed model. The first is the p2 tau law. The second is the desensitization of energetic materials by a ramp wave applied stress. An approach to improve the model based on experimental observations is outlined.

Kim, K.↗

A sensitivity model for energy consumption in buildings. Part 1: Effect of exterior environment

A simple analytical model is developed for the simulation of seasonal heating and cooling loads of any class of buildings to complement available computerized techniques which make hourly, daily, and monthly calculations. An expression for the annual energy utilization index, which is a common measure of rating buildings having the same functional utilization, is derived to include about 30 parameters for both building interior and exterior environments. The sensitivity of a general class building to either controlled or uncontrolled weather parameters is examined. A hypothetical office type building, located at the Goldstone Space Communication Complex, Goldstone, California, is selected as an example for the numerical sensitivity evaluations. Several expressions of variations in local outside air temperature, pressure, solar radiation, and wind velocity are presented.

Lansing, F. L.↗

Space Shuttle Orbiter flight heating rate measurement sensitivity to thermal protection system uncertainties

A study was completed to determine the sensitivity of computed convective heating rates to uncertainties in the thermal protection system thermal model. Those parameters considered were: density, thermal conductivity, and specific heat of both the reusable surface insulation and its coating; coating thickness and emittance; and temperature measurement uncertainty. The assessment used a modified version of the computer program to calculate heating rates from temperature time histories. The original version of the program solves the direct one dimensional heating problem and this modified version of The program is set up to solve the inverse problem. The modified program was used in thermocouple data reduction for shuttle flight data. Both nominal thermal models and altered thermal models were used to determine the necessity for accurate knowledge of thermal protection system's material thermal properties. For many thermal properties, the sensitivity (inaccuracies created in the calculation of convective heating rate by an altered property) was very low.

Bradley, P. F.↗

Coal/rock interface detection by sensitized pick, part A

In order to increase the operating margins of the detector for safe, reliable operation under difficult in-mine conditions the transmitted signal strength was increased to provide additional signal margin for in-mine conditions and the transmitter section was redesigned to reduce frequency pulling of the transmitter frequency with variations in antenna load. The linearity of the pick load SCO signal with true pick load was increased, and hysteresis effects were minimized. The sensitized pick hardware was ruggedized for rough inmine use. The sensitized pick and telemetry system provided excellent, high quality signals proportional to cutting load under all conditions experienced during testing.

Wu, P. T. K.↗

Enhanced skeletal muscle insulin sensitivity in year-old rats adapted to hypergravity

Rats induced into a hypermetabolic state by exposure to chronic (7 mo) centrifugation at 4.15 g exhibited increased glucose uptake at lower plasma insulin levels than weight-matched control animals following oral glucose administration. In order to determine the insulin sensitivity of specific tissues, the effect of exogenous insulin on glucose uptake by isolated perfused livers and hindlim skeletal muscle from rats adapted to chronic centrifugation for one year was compared with perfused tissue from 2.5 mo-old noncentrifuged control animals of equal body weight. Metabolic glucose clearance by skeletal muscle from hypergravic rats did not prove significantly greater than control muscle when perfused in the absence of insulin (10.6 vs 8.1 microliters/min-g-muscle), but was twice as fast (23.0 vs 9.5) at perfusate insulin levels of 35 micro-U/ml. Conversely, glucose uptake by hypergravic livers was significantly decreased (P is less than 0.001) compared with control livers (10.3 vs 27.8) at perfusate insulin levels of 40 micro-U/ml. Results suggest that skeletal muscle rather than liver is primarily responsible for the enhanced sensitivity to insulin and the increased energy expenditure observed in rats subjected to hypergravity.

Mondon, C. E.↗

DC calibration of the strain sensitivity of a single mode optical fiber interferometer

The strain sensitivity of an optical fiber interferometer developed for the detection of pulsed ultrasonic waves in solids has been calibrated. The optical paths in both signal and reference arms of the interferometer are through similar 2 m lengths of ITT-110 single mode fibers mode stripped by index matching at both ends and attached to opposite sides of a 30 cm plexiglas bar 0.3 cm thick. Light from the output ends of both fibers was superimposed to form an interference fringe pattern that was interrogated in the far field to give a signal proportional to the differential optical fiber path length. Strain sensitivity was determined by comparing data obtained by clamping and bending the bar at different lengths to simple cantilever beam theory. Calibration indicates a minimum theoretical detectable strain of less than 10 to the -10.

Claus, R. O.↗