Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shell model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

The vibrations of a cylindrical shell in a flowing acoustic media

A mathematical model is presented for the effect of flow on the vibrations of a thin cylindrical shell in a subsonically-flowing acoustic media. The effect of the external acoustic fluid consists of a mass-like term caused by the 'virtual-mass' effect of the fluid and a 'damping-like' term which accounts for the radiation of energy away from the cylinder. For a flowing medium, both of these terms are shown to involve the flow velocity. The effect of flow on the cylinder resonances is examined numerically. While not all modes are affected by the flow, there are some modes which are significantly affected. Usually, the added mass of the fluid increases with flow velocity causing a reduction in the resonant frequency of the shell mode.

Koval, L. R.↗

Damage Tolerance of Large Shell Structures

Progressive damage and fracture of large shell structures is investigated. A computer model is used for the assessment of structural response, progressive fracture resistance, and defect/damage tolerance characteristics. Critical locations of a stiffened conical shell segment are identified. Defective and defect-free computer models are simulated to evaluate structural damage/defect tolerance. Safe pressurization levels are assessed for the retention of structural integrity at the presence of damage/ defects. Damage initiation, growth, accumulation, and propagation to fracture are included in the simulations. Damage propagation and burst pressures for defective and defect-free shells are compared to evaluate damage tolerance. Design implications with regard to defect and damage tolerance of a large steel pressure vessel are examined.

Minnetyan, L.↗

Origin of Domes on Europa: The Role of Thermally Induced Compositional Buoyancy,

The surface of Jupiter's moon Europa is peppered by topographic domes, interpreted as sites of intrusion and extrusion. Diapirism is consistent with dome morphology, but thermal buoyancy alone cannot produce sufficient driving pressures to create the observed dome elevations. Instead, diapirs may initiate by thermal convection that induces compositional segregation. Exclusion of impurities from warm upwellings allows sufficient buoyancy for icy plumes to create the observed surface topography, provided the ice shell has a small effective elastic thickness (0.2 to 0.5 km) and contains low-eutectic point impurities at the few percent level. This model suggests that the ice shell may be depleted in impurities over time.

Pappalardo, R. T.↗

Radio to Gamma-Ray Emission from Shell-Type Supernova Remnants: Predictions from Non-Linear Shock Acceleration Models

Supernova remnants (SNRs) are widely believed to be the principal source of galactic cosmic rays, produced by diffusive shock acceleration in the environs of the remnant's expanding blast wave. Such energetic particles can produce gamma-rays and lower energy photons via interactions with the ambient plasma. The recently reported observation of TeV gamma-rays from SN1006 by the CANGAROO Collaboration, combined with the fact that several unidentified EGRET sources have been associated with known radio/optical/X-ray-emitting remnants, provides powerful motivation for studying gamma-ray emission from SNRs. In this paper, we present results from a Monte Carlo simulation of non-linear shock structure and acceleration coupled with photon emission in shell-like SNRs. These non-linearities are a by-product of the dynamical influence of the accelerated cosmic rays on the shocked plasma and result in distributions of cosmic rays which deviate from pure power-laws. Such deviations are crucial to acceleration efficiency considerations and impact photon intensities and spectral shapes at all energies, producing GeV/TeV intensity ratios that are quite different from test particle predictions.

Baring, Matthew G.↗

A Massive X-ray Outflow From The Quasar PDS 456

We report on XMM-Newton spectroscopic observations of the luminous, radio-quiet quasar PDS 456. The hard X-ray spectrum of PDS 456 shows a deep absorption trough (constituting 50% of the continuum) at energies above 7 keV in the quasar rest frame, which can be attributed to a series of blue-shifted K-shell absorption edges due to highly ionized iron. The higher resolution soft X-ray grating RGS spectrum exhibits a broad absorption line feature near 1 keV, which can be modeled by a blend of L-shell transitions from highly ionized iron (Fe XVII - XXIV). An extreme outflow velocity of approx. 50000 km/s is required to model the K and L shell iron absorption present in the XMM-Newton data. Overall, a large column density (N(sub H) = 5 x 10(exp 23)/sq cm) of highly ionized gas (log xi = 2.5) is required in PDS 456. A large mass outflow rate of approx. 10 solar mass/year (assuming a conservative outflow covering factor of 0.1 steradian) is derived, which is of the same order as the overall mass accretion rate in PDS 456. This represents a substantial fraction (approx. 10%) of the quasar energy budget, whilst the large column and outflow velocity place PDS 456 towards the extreme end of the broad absorption line quasar population.

Reeves, J. N.↗

A mixed pseudospectral/finite difference method for the axisymmetric flow in a heated, rotating spherical shell

For a Spacelab flight, a model experiment of the earth's atmospheric circulation has been proposed. This experiment is known as the Atmospheric General Circulation Experiment (AGCE). In the experiment concentric spheres will rotate as a solid body, while a dielectric fluid is confined in a portion of the gap between the spheres. A zero gravity environment will be required in the context of the simulation of the gravitational body force on the atmosphere. The present study is concerned with the development of pseudospectral/finite difference (PS/FD) model and its subsequent application to physical cases relevant to the AGCE. The model is based on a hybrid scheme involving a pseudospectral latitudinal formulation, and finite difference radial and time discretization. The advantages of the use of the hybrid PS/FD method compared to a pure second-order accurate finite difference (FD) method are discussed, taking into account the higher accuracy and efficiency of the PS/FD method.

Macaraeg, M. G.↗

Normalization of Gravitational Acceleration Models

Unlike the uniform density spherical shell approximations of Newton, the con- sequence of spaceflight in the real universe is that gravitational fields are sensitive to the nonsphericity of their generating central bodies. The gravitational potential of a nonspherical central body is typically resolved using spherical harmonic approximations. However, attempting to directly calculate the spherical harmonic approximations results in at least two singularities which must be removed in order to generalize the method and solve for any possible orbit, including polar orbits. Three unique algorithms have been developed to eliminate these singularities by Samuel Pines [1], Bill Lear [2], and Robert Gottlieb [3]. This paper documents the methodical normalization of two1 of the three known formulations for singularity-free gravitational acceleration (namely, the Lear [2] and Gottlieb [3] algorithms) and formulates a general method for defining normalization parameters used to generate normalized Legendre Polynomials and ALFs for any algorithm. A treatment of the conventional formulation of the gravitational potential and acceleration is also provided, in addition to a brief overview of the philosophical differences between the three known singularity-free algorithms.

Eckman, Randy A.↗

Normalization and Implementation of Three Gravitational Acceleration Models

Unlike the uniform density spherical shell approximations of Newton, the consequence of spaceflight in the real universe is that gravitational fields are sensitive to the asphericity of their generating central bodies. The gravitational potential of an aspherical central body is typically resolved using spherical harmonic approximations. However, attempting to directly calculate the spherical harmonic approximations results in at least two singularities that must be removed to generalize the method and solve for any possible orbit, including polar orbits. Samuel Pines, Bill Lear, and Robert Gottlieb developed three unique algorithms to eliminate these singularities. This paper documents the methodical normalization of two of the three known formulations for singularity-free gravitational acceleration (namely, the Lear and Gottlieb algorithms) and formulates a general method for defining normalization parameters used to generate normalized Legendre polynomials and Associated Legendre Functions (ALFs) for any algorithm. A treatment of the conventional formulation of the gravitational potential and acceleration is also provided, in addition to a brief overview of the philosophical differences between the three known singularity-free algorithms.

Eckman, Randy A.↗

The hydrogen shell game - Pulsational instabilities in hydrogen shell-burning planetary nebula nuclei

Fully nonadiabatic g-mode pulsation calculations have been obtained for evolutionary models of planetary nebula nuclei (PNN) with active hydrogen-burning shells. Expressions have been developed for the phase delays which can develop between the temperature variations and the abundance variations of agents in the CN cycle. G-mode instabilities are noted that are driven by the epsilon mechanism at the position of the nuclear burning shells in standard PNN models. The results indicate that the central stars do not retain sufficient hydrogen to support nuclear burning following ejection of the planetary nebula.

Kawaler, Steven D.↗

Grain formation around carbon stars. 1: Stationary outflow models

Asymptotic giant branch (AGB) stars are known to be sites of dust formation and undergo significant mass loss. The outflow is believed to be driven by radiation pressure on grains and momentum coupling between the grains and gas. While the physics of shell dynamics and grain formation are closely coupled, most previous models of circumstellar shells have treated the problem separately. Studies of shell dynamics typically assume the existence of grains needed to drive the outflow, while most grain formation models assume a constant veolcity wind in which grains form. Furthermore, models of grain formation have relied primarily on classical nucleation theory instead of using a more realistic approach based on chemical kinetics. To model grain formation in carbon-rich AGB stars, we have coupled the kinetic equations governing small cluster growth to moment equations which determine the growth of large particles. Phenomenological models assuming stationary outflow are presented to demonstrate the differences between the classical nucleation approach and the kinetic equation method. It is found that classical nucleation theory predicts nucleation at a lower supersaturation ratio than is predicted by the kinetic equations, resulting in significant differences in grain properties. Coagulation of clusters larger than monomers is unimportant for grain formation in high mass-loss models but becomes more important to grain growth in low mass-loss situations. The properties of the dust grains are altered considerably if differential drift velocities are ignored in modeling grain formation. The effect of stellar temperature, stellar luminosity, and different outflow velocities are investigated. The models indicate that changing the stellar temperature while keeping the stellar luminosity constant has little effect on the physical parameters of the dust shell formed. Increasing the stellar luminosity while keeping the stellar temperature constant results in large differences in grain properties. For small outflow velocities, grains form at lower supersaturation ratios and close to the stellar photosphere, resulting in larger but fewer grains. The reverse is true when grains form under high outflow velocities, i.e., they form at higher supersaturation ratios, farther from the star, and are much smaller but at larger quantities.

Egan, Michael P.↗

Superclustering in the explosion scenario

A simple toy model is used to study the spatial distribution of rich clusters in a generic type of explosion scenario. The model, parameterized by the distribution of shell radii and the filling factor, places spherical shells at random and identifies each 'knot' as a cluster. The resulting cluster correlation function is close to a power law extending to the diameter of the largest spheres. Richer clusters form at the intersections of bigger shells and so have stronger correlations. Typical shell radii and filling factors are required to produce the observed number density of clusters. Models with a power-law radius distribution also reproduce the richness distribution of clusters in the Abell catalog. Supercluster multiplicity functions, void probabilities, number counts, topology statistics, and velocity correlations confirm the presence of strong superclustering and quantify the non-Gaussian nature of the model.

Weinberg, David H.↗

Off-shell pion properties: Electromagnetic form factors and light-front wave functions

The off-shell pion electromagnetic form factors are explored with corresponding off-shell light-front wave functions modeled by constituent quark and antiquark. We apply the Mandelstam approach for the microscopic computation of the form factors relating the model parameters with the pion decay constant and charge radius. Analyzing the existing data on the cross sections for the Sullivan process, 1 H(e,e',π + )⁢n, Charged pion form factor between Q 2 = 0.60, and 2.45 GeV 2 . I. Measurements of the cross section for the 1 H⁡(e,e'⁢π + )⁢n reaction, we extract the off-shell pion form factor using the relation derived from the generalized Ward-Takahashi identity for the pion electromagnetic current. They are compared with our previous results from exactly solvable manifestly covariant model of a (3+1)-dimensional fermion field theory. We find that the adopted constituent quark model reproduces the extracted off-shell form factor F 1 ⁡(Q 2 ,t) from the experimental data within a few percent difference and matches well with our previous theoretical simulation which exhibits a variation of about 10% for the extracted off-shell pion form factor g(Q 2 ,t). We also identify the pion valence parton distribution function (PDF) and transverse momentum distribution (TMD) in terms of the light-front wave function and discuss their off-shell properties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Stellar evolution. ii. the hydrogen-burning phase of a star of 7.0 solar masses <sternentwicklung. ii. die wasserstoff- brennende phase eines sterns von 7.0 sonnenmassen<

With the computer program by Hofmeister, Kippenhahn, Weigert (1964, from now on referred to as ''I") the evolution of a population I star of 7.0 solar masses has been followed. The results presented here are based on a sequence of 119 models, the first of which represents the homogeneous main sequence state and has a convective core containing 26% of the mass. The following models describe the phase of depletion of hydrogen in the core, which is shrinking in mass until the convection around the centre disappears. After this the gradual development of a hydrogen burning shell source is shown. The models show the evolution into the red giant region, while the helium core is contracting until helium burning starts at the centre and a new convective core is built up. The luminousity is increased about 1 magnitude compared with the main sequence state. At the same time the outer convective region grows in mass and covers at the maxi­mum 71% of the total mass of the star. During the evolution to the red giant state, the evolutionary track crosses the region of the cepheids. Some aspects of the corresponding models are discussed.

STELLAR EVOLUTION↗

Induced nucleation of carbon dust in red giant stars

This study quantitatively tests the proposed model of induced nucleation of carbonaceous grains in carbon-rich red giant stars. Induced nucleation is the process of grain growth initiated by the presence of reactive surfaces provided by seed particles. The numerical study was performed using a deailed chemical kinetic model of carbon deposition, grain coagulation, and homogeneous nucleation of polycyclic aromatic hydrocarbons (PAHs). The model uses a method of moments to keep track of developing grain population in the forming dust shell. We test the efficiency of grain formation for large ranges of dust shell parameters typical for carbon stars. Our model is capable of producing a range of optically thick and thin dust shells in carbon stars. Results are in accord with (IRAS) spectral classes of carbon stars. The resulting composite grains produced are consistent with those recently found in ancient meteorites. This model also provides a realistic explanation for high abundances of (PAHs) in the interstellar medium and some planetary nebulae.

Cadwell, Brian J.↗

Coldspots and hotspots - Global tectonics and mantle dynamics of Venus

Based on geologic observations provided by Magellan's first cycle of data collection and recent models of mantle convection in spherical shells and crustal deformation, the major topographic and geologic features of Venus are incorporated into a model of global mantle dynamics. Consideration is given to volcanic rises, such as Beta Regio and Atla Regio, plateau-shaped highlands dominated by complex ridged terrain (e.g., Ovda Regio and Alpha Regio), and circular lowland regions, such as Atalanta Planitia. Each of these features is related to either mantle plumes (hotspots) or mantle downwellings (coldspots).

Bindschadler, Duane L.↗

Modeling and Sensitivity Analysis of Sandwich Composite Cylinders with Geometric Imperfections

It is well known that real shell structures can have significantly lower buckling loads and even different mode shapes than the theoretical predictions for perfect structures. Much of this difference can be attributed to geometric and loading imperfections, and geometrically nonlinear effects. The realistic buckling response can be investigated using geometrically nonlinear finite element analyses and including radial imperfections. Such analyses are used in the NASA Engineering and Safety Center Shell Buckling Knockdown Factor Project, which has the goal of developing new analysis-based buckling design recommendations for select classes of cylindrical shell structures under uniaxial compressive load. The approach for modeling several sandwich composite cylinders with two-dimensional general-purpose shell elements and the influence of the element type selection and element size on the buckling load is discussed. The influence of geometric imperfections of various magnitudes on buckling behavior of a sandwich composite cylinder was also investigated.

Structural Modeling↗

Modeling and Sensitivity Analysis of Sandwich Composite Cylinders with Geometric Imperfections

It is well known that manufactured shell structures can have significantly lower buckling loads and different mode shapes than the theoretical predictions for perfect structures. Much of this difference can be attributed to geometric and loading imperfections, and geometrically nonlinear effects. The buckling response of cylindrical structures can be investigated using geometrically nonlinear finite element analyses and including radial imperfections. Such analyses are used in the NASA Engineering and Safety Center Shell Buckling Knockdown Factor Project, which has the goal of developing new analysis-based buckling design recommendations for select classes of cylindrical shell structures under uniaxial compressive load. The approach for modeling several sandwich composite cylinders with two-dimensional general-purpose shell elements and the influence of the element type selection and element size on the buckling load is discussed. The influence of geometric imperfections of various magnitudes on buckling behavior of a sandwich composite cylinder was also investigated.

Structural Modeling↗