Search NASA⌕ Search

SEARCH · Search NASA

Results for “SiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Physical properties and surface/interface analysis of nanocrystalline WO3 films grown under variable oxygen gas flow rates

Nanocrystalline WO3 films were grown by reactive magnetron sputter-deposition in a wide range of oxygen gas flow rates while keeping the deposition temperature fixed at 400 oC. The physical characteristics of WO3 films were evaluated using grazing incidence X-ray diffraction (GIXRD), X-ray reflectivity (XRR) and transmission electron microscopy (TEM) measurements. Physical characterization indicates that the thickness, grain size, and density of WO3 films are sensitive to the oxygen gas flow rate during deposition. XRD data indicates the formation of tetragonal WO3 films. The grain size increases from 21 to 25 nm with increasing oxygen gas flow rate to 65%, at which point the grain size exhibits a decreasing trend to attain the lowest value of 15 nm at 100% oxygen. TEM analysis provides a model consisting of isotropic WO3 film (nanocrystalline)-SiO2 interface (amorphous)-Si(100) substrate. XRR simulations, which are based on this model, provide excellent agreement to the experimental data indicating that the normalized thickness of WO3 films decreases with the increasing oxygen gas flow rate. The density of WO3 films increases with increasing oxygen gas flow rate.

density↗

Discovering the feasibility of using the radiation forces for recovering rare earth elements from coal power plant by-products

The feasibility of using laser separation for rare earth recovery from coal ashes was explored. To do so, laser-induced motion and travel distances of some rare earth and rare earth oxides (Lu2O3, Yb2O3, HfO2, Dy2O3, Ta2O5, Tm, Lu, Ho, TeO2, La2O3, Ho, TiO2, Fe2O3 Y2O3, GeO2, Sc2O3) and mineral compounds (MgO, CaO, Al2O3, SiO2, KCl) that are commonly found is coal ashes were numerically investigated. The investigations were carried out for particles in quiescent air, (T = 300 K, μ = 18.46 x 10-6 N-s/m2 , ρ = 1.177 kg/m3 ) exposing to a CW laser beam of 6 mm in diameter and it was focused by a 500 mm focal length lens. The results showed that the separation distances between these elements varied from few micrometers to several millimeters and it became widened as the laser power increased. The important result presented here is that all rare earth oxides were separated and concentrated in a small area located near the beam waist while all other mineral compounds traveled further and concentrated in a small area far from the beam waist.

36 MATERIALS SCIENCE↗

Crystalline Loading of Lipophilic Coenzyme Q10 Pharmaceuticals within Conjugated Carbon Aerogel Derivatives

Low-density aerogel materials currently are being considered for applications in controlling the rate of release for small-molecule pharmaceuticals in vivo. In particular, silica (SiO2) aerogels are an intriguing platform for controlling both the absolute amount of drug loading, but also the crystalline state of small molecule pharmaceuticals has been shown to affect drug release kinetics. To date, loading silica aerogel materials with crystalline pharmaceuticals typically require dissolving small molecules in a supercritical solvent (i.e., CO2) before drying to recover the aerogel/drug composite. Here we demonstrate a simple and low-cost method for controlling the crystallinity of the model drug coenzyme Q10 (CoQ10) within carbon aerogel materials by rationally controlling the chemical microstructure of the aerogel to exhibit ?-conjugated (sp2) chemical bonding. In particular, both pyrolyzed graphene and nanodiamond aerogels exhibit enhanced intrinsic drug loading capacity and CoQ10 crystallinity over a broad range of sp2 surface-curvature. In contrast, amorphous carbon aerogel materials are observed to load CoQ10 pharmaceuticals with strictly amorphous microstructure.

Lim, Mathew↗

Aqueous phase hydrodeoxygenation of polyols over Pd/WO3-ZrO2: Role of Pd-WO3 interaction and hydrodeoxygenation pathway

Aqueous-phase hydrodeoxygenation of sugar and sugar-derived molecules can be used to produce a range of alkanes and oxygenates. In this paper, we have identified the reaction intermediates and reaction chemistry for the aqueous-phase hydrodeoxygenation of sorbitol over a bifunctional catalyst (Pt/SiO2–Al2O3) that contains both metal (Pt) and acid (SiO2–Al2O3) sites. A wide variety of reactions occur in this process including Csingle bondC bond cleavage, Csingle bondO bond cleavage, and hydrogenation reactions. The key Csingle bondC bond cleavage reactions include: retro-aldol condensation and decarbonylation, which both occur on metal catalytic sites. Dehydration is the key Csingle bondO bond cleavage reaction and occurs on acid catalytic sites. Sorbitol initially undergoes dehydration and ring closure to produce cyclic C6 molecules or retro-aldol condensation reactions to produce primarily C3 polyols. Isosorbide is the major final product from sorbitol dehydration. Isosorbide then undergoes ring opening hydrogenation reactions and a dehydration/hydrogenation step to form 1,2,6-hexanetriol. The hexanetriol is then converted into hexanol and hexane by dehydration/hydrogenation. Smaller oxygenates are produced by Csingle bondC bond cleavage. These smaller oxygenates undergo dehydration/hydrogenation reactions to produce alkanes from C1–C5. The results from this paper suggest that hydrodeoxygenation chemistry can be tuned to make a wide variety of products from biomass-derived oxygenates.

aqueous phase hydrodeoxygenation↗

Toward Rational Design of Supported Vanadia Catalysts of Lignin Conversion to Phenol

In sustainable chemical engineering, catalytic upgrading of lignocellulosic biomass has recently gained attention for producing renewable platform chemicals. To achieve maximal biomass utilization, upgrading the underutilized lignin components is essential. Among various catalysts for lignin upgrading, supported vanadia (V2O5) catalysts are promising because of their cost-effectiveness and tunability of either dopant metals or catalyst supports. Here, computational studies are conducted to derive rational design guidelines of supported V2O5 catalysts for accomplishing the high catalytic activity of lignin upgrading to phenol, a key compound for producing bioplastics and biofuel blendstocks. Guaiacol was used as the model compound since it comprises the highest portion of depolymerized lignin. Computational mechanistic studies for the catalytic guaiacol conversion to phenol were performed for the V2O5 catalysts on Titania (TiO2) and silica (SiO2) to explain higher experimental phenol yields on V2O5/SiO2 than V2O5/TiO2. The hydrogen migration from the methoxy group to the aryl ring was identified as a rate-determining step, and the overall activation energies on the two catalysts were compared. A structural analysis was carried out for the catalysts and rate-determining transition states to gain further insights from mechanistic studies. It was concluded that the tilt angle of the aryl group in the hydrogen migration transition state is a key descriptor determining the catalytic activity of phenol formation. These features correlate well with activation energies and experimental phenol yields, indicating that they provide design guidelines for supported metal catalysts for lignin upgrading before experiments.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

Sorption Mechanisms of Antibiotic Cephapirin onto Quartz and Feldspar by Raman Spectroscopy

Raman spectroscopy was used to investigate the sorption mechanisms of cephapirin (CHP), a veterinary antibiotic, onto quartz (SiO2) and feldspar (KAlSi3O8) at different pH values. Depending on the charge and surface properties of the mineral, different reaction mechanisms including electrostatic attraction, monodentate and bidentate complexation were found to be responsible for CHP sorption. The zwitterion (CHPo) adsorbs to a quartz(+) surface by electrostatic attraction of the carboxylate anion group ( COO-) at a low pH, but adsorbs to a quartz(-) surface through electrostatic attraction of the pyridinium cation and possibly COO- bridge complexes at relatively higher pH conditions. CHP- bonds to a quartz(-) surface by bidentate complexation between one oxygen of COO- and oxygen from the carbonyl (C=O) of the acetoxymethyl group. On a feldspar surface of mixed charge, CHPo forms monodentate complexes between C=O as well as COO- bridging complexes or electrostatically attached to localized edge (hydr)oxy-Al surfaces. CHP- adsorbs to feldspar(-) through monodentate C=O complexation, and similar mechanisms may operate for the sorption of other cephalosporins. This research demonstrates, for the first time, that Raman spectroscopic techniques can be effective for evaluating the sorption processes and mechanisms of cephalosporin antibiotics even at relatively low sorbed concentrations (97-120 μmol/kg).

60 APPLIED LIFE SCIENCES↗

Hydrotreatment of pyrolysis bio-oil: A review

Fast pyrolysis is an effective process to convert more than 60 wt. % of lignocellulosic materials into a bio-oil that can be further hydrotreated for transportation fuel production. However, bio-oil is acidic, viscous, and chemically unstable due to its high oxygen content. Therefore, increasing attention has being paid to deoxygenation of bio-oil through catalytic hydrotreatment into a “drop-in” fuel has been gaining attention from researchers. The first section of this review is devoted to summarize our current understanding of bio-oil composition. Bio-oil hydrotreatment is typically conducted in two-steps. In the first step, known as stabilization, the reactive carbonyl and carboxyl functional groups are transformed into alcohols at a temperature between 373 and 573 K. In the second step, between 623 and 673 K, cracking and hydro-deoxygenation (HDO) occurs. The most common catalysts used in the stabilization step are noble metals (Pt, Ru, Pd) supported on carbon and metal oxides (TiO2, Al2O3, SiO2, Fe2O3, ZrO2). The most common catalysts for deoxygenation and hydrocracking are sulfided CoMo or NiMo. More recently transition metal phosphides and carbides have been shown to be active. The effect of hydrotreatment parameters and the main global reaction mechanisms are discussed. In the first section, we update the progresses made on bio-oil composition, followed by a detailed discussion on the role of heterogeneous catalysts. Many of the bio-oil hydrotreament studies in the literature are based on model compound results. The reactions revealed by such approach are summarized and discussed. Although these studies provide valuable information for developing upgrading strategies, bio-oil chemistry is difficult to describe by model compounds. Thus, we also reviewed a smaller number of hydrotreatment studies of pyrolysis oil fractions. The presence of several oxygenated functional groups (phenols, carboxylic acids, carbonyls, alcohols) in monomeric and oligomeric molecules is a major challenge to study hydrotreatment reactions. Under realistic industrial operational conditions undesirable polymerization and crosslinking reactions leading to catalyst deactivation are very important. In spite of the extensive work on bio-oil hydrotreatment, the nature of the reactions happening in these complex oils is still poorly known. Pyrolytic lignin and sugars have been identified as important contributors to coke formation. Both fractions can then undergo successful hydrogenation or hydrogenolysis over the catalysts. The review ends with a discussion on future prospects and challenges to hydrotreat pyrolysis oils. Because bio-oil is a liquid formed by hundreds of molecules covering a wide range of molecular weights and functionalities, it is very unlikely that a single hydrotreatment technology that makes a good use of each of its molecules could be found. In fact, current hydrotreatment schemes sacrifice some fractions (convert them into low value products) to maximize the conversion of others into fuel. Separation of bio-oil in fractions and processing of each of them via hydrotreatment or by other suitable technology at optimized conditions with well suited catalysts to obtain high value products seems to be the most promising path to reduce hydrogen consumption, coke formation and enhance the economic viability of bio-oil refineries.

Han, Yinglei↗

Monte Carlo Simulations of the Dissolution of Borosilicate and Aluminoborosilicate Glasses in Dilute Aqueous Solutions

The aim of this study was to provide atomic-level insights into the dissolution behavior of borosilicate and aluminoborosilicate glasses to complement and help interpret previous experimental work on the NeB glass series studied by Pierce et al. [Pierce E. M., Reed L. R., Shaw W. J., McGrail B. P., Icenhower J. P., Windisch C. F., Cordova E. A. and Broady J. (2010) Experimental determination of the effect of the ratio of B/Al on glass dissolution along the nepheline (NaAlSiO4) - Malinkoite (NaBSiO4) join. Geochim. Cosmochim. Acta 74, 2634-2654]. The composition of these glasses was 50 mol% SiO2 - 25 mol% Na2O - (25-x) mol% Al2O3 - x mol% B2O3, with x varying from 0 to 20 mol%. In the first part of this work, the different structural features of these glasses (e.g., presence of non-bridging oxygens, partition of boron between trigonal and tetrahedral bonding environments, and formation of boroxol rings), identified in the study of Pierce et al., were implemented in the Monte Carlo program. Their effects on the dissolution of borosilicate and aluminosilicate glasses were then evaluated individually and led to the following conclusions. (1) The dependence of the dissolution rate on the amount of non-bridging oxygens was found to be linear at all Si/B ratios and the accelerating effect of non-bridging oxygens was shown to increase with increasing Si/B ratio. (2) The formation of boroxol rings and of clusters of boroxol rings resulted in an increase of the dissolution rate at all Si/B ratios and, again, the extent of the rate increase was strongly dependent on the Si/B ratio. (3) For aluminosilicate glasses, the implementation of the aluminum avoidance rule was found to increase the rate of dissolution relative to that obtained for a random distribution. In the second part of this work, Monte Carlo simulations were performed to model the dissolution of the NeB glasses in dilute conditions. One of the conclusions that emerged from the study of Pierce et al. was that either the rupture of the Al-O bonds or that of the Si-O bonds was the rate-limiting step controlling the dissolution of the NeB glasses. The Monte Carlo simulations carried out in this work enabled us to refine this conclusion. Indeed, the simulations showed that, at low B/Al ratios, the rupture of both Al-O-Si and Si-O-Si linkages contributed to the dissolution rate whereas, at high B/Al ratios, the dissolution rate was independent of the rupture of Al-O-Si linkages and was controlled by S1 sites (silicon sites at the glass-water interface with one bond to nearest-neighbor sites) and dissolution via detachment of clusters.

aluminosilicates↗

Glass–water interaction: Effect of high-valence cations on glass structure and chemical durability

Borosilicate glass is a durable solid, but it dissolves when in contact with aqueous fluids. The dissolution mechanism, which involves a variety of sequential reactions that occur at the solid-fluid interface, has important implications for the corrosion resistance of industrial and nuclear waste glasses. In this study, spectroscopic measurements, dissolution experiments, and Monte Carlo simulations were performed to investigate the effect of high–valence cations (HVC) on the mechanisms of glass dissolution under dilute and near-saturated conditions. Raman and NMR spectroscopy were used to determine the structural changes that occur in glass, specifically network formers (e.g., Al, Si, and B), with the addition of the HVC element hafnium in the Na2O–Al2O3–B2O3–HfO2–SiO2 system (e.g., Na/[Al+B] = 1.0 and HfO2/SiO2 from 0.0 to 0.42). Spectroscopic measurements revealed that increasing hafnium content decreases N4 (tetrahedral boron/total boron) and increases the amount of Si—O—Hf moieties in the glass. Results from flow–through experiments conducted under dilute and near–saturated conditions show a decrease of approximately 100× or more in the dissolution rate over the series from 0 to 20 mol% HfO2. Comparing the average steady-state rates obtained under dilute conditions to the rates obtained for near-saturated conditions reveals a divergence in the magnitude between the average steady state rates measured in these different conditions. The reason for this divergence was investigated more thoroughly using Monte Carlo simulations. Simulations indicate that the divergence in glass dissolution behavior under dilute and near-saturated conditions result from the stronger binding of Si sites that deposit on the surface from the influent when Hf is present in the glass. As a result, the residence time at the glass surface of these newly-formed Si sites is longer in the presence of Hf, which increases the density of anchor sites from which altered layers with higher Si densities can form. These results illustrate the importance of understanding solid–water/solid-fluid interactions by linking macroscopic reaction kinetics to nanometer scale interfacial processes.

Environmental Molecular Sciences Laboratory↗

Substitution and diffusion of Cr 2+ and Cr 3+ in synthetic forsterite and natural olivine at 1200–1500 °C and 1 bar

The diffusion and substitution mechanisms of Cr in forsterite were studied as a function of crystallographic orientation and the chemical potentials of all four components in the system MgO-SiO2-Cr-O. Oxygen fugacity (fO2) was varied over 15.4 log units at 1400 °C and was fixed at the iron-wüstite equilibrium for a temperature series (1200–1500 °C). The valence state changes of Cr along some diffusion profiles was also investigated using X-ray absorption near edge structure spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Role of H2O in the Carbonation of Forsterite in Supercritical CO2

The water concentration dependence of forsterite carbonation in supercritical CO2 (scCO2) at 80°C and 76 bars was investigated by a combination of NMR, XRD, TEM and XPS. Reaction products were not detected using scCO2 alone without added H2O. When trace amounts of water were included, limited reaction was observed. Below saturation, reaction products were a mixture of partially hydrated/hydroxylated magnesium carbonates and hydroxylated silica species that were mainly in an amorphous state, forming a non-resolved layer on the forsterite surface. At water concentrations above saturation, where forsterite was in contact with both a CO2-saturated aqueous fluid and a water-saturated scCO2 fluid, solid reaction products were magnesite (MgCO3) and an amorphous polymerized SiO2 dominated by Q4, and to a lesser extent by Q3 silica coordination. Formation of these phases implies H2O initially bound in precursor hydrated/hydroxylated reaction products was liberated, inducing further reaction. Hence, for a given fluid/mineral ratio there is a water threshold above which a significant portion of the water serves in a catalytic role where more extensive carbonation reaction occurs. Defining the role of water, even in low water content environments, is therefore critical to determining the long term impact of CO2 reactivity in the subsurface.

54 ENVIRONMENTAL SCIENCES↗

Computer simulation of reaction and transport of core-scale serpentinization of Fe-bearing olivine and evolution of geological hydrogen

We present reactive flow and transport simulations of core-scale serpentinization of forsteritic, Fe-bearing olivine under hydrothermal conditions. The model captures fluid flow, evolving porosity–permeability, and redox-controlled H 2 production in a cylindrical core over 55 days at 245 °C and 37 bar. Key processes include olivine dissolution, precipitation of serpentine and magnetite, and oxidation of Fe2+ to Fe 3+ . Here, results show strong coupling among flow velocity, alteration front propagation, and spatially heterogeneous H 2 generation. Elevated H2 concentrations align with inlet-localized magnetite precipitation, consistent with experiments. Secondary mineral formation reduces porosity and permeability, altering transport pathways. Reactive flow at the fluid–solid interface governs H 2 generation rates and distribution. Dissolved SiO2 promotes serpentine and talc formation by suppressing brucite, while bicarbonate extends reaction duration and moderates surface complexation effects.

Geologic hydrogen↗

Modulation of susceptibility to lung bacterial infection by engineered nanomaterials: In vitro and in vivo correspondence based on macrophage phagocytic function

The vast diversity of engineered nanoparticles (ENPs) under development is driving demand for new approaches for predictive toxicological and hazard analysis, placing increased importance on rapid in vitro (cellular) test systems for nanotoxicology. While the potential health effects of engineered nanomaterials in humans remain uncertain, evidence links exposure to nanoscale particulates from ambient and occupational sources with increased susceptibility to lung infections, including pneumonia. Here, we applied an in vitro assay amenable to high throughput to evaluate the effects of pretreatment with 16 different ENP types on the ability of macrophages to phagocytize Streptococcus pneumoniae, the leading cause of community-acquired pneumonia. Hierarchical clustering analysis of the results revealed three major classes of ENPs, ranging from metal oxide ENPs which induce macrophage cytotoxicity and robustly inhibit phagocytic function (e.g., CuO, CoO), to ENPs that had no detectable adverse effects (e.g. SiO2, TiO2). Importantly, some ENPs that lacked bioactivity by conventional cytotoxicity measures, (e.g., Fe3O4) were found to significantly suppress macrophage phagocytic function. Lung infection studies in mice using three ENPs, representing the low, medium and high toxic groups, showed excellent correspondence with in vitro predictions of their inhibitory effects on lung clearance/survival of S. pneumonia in vivo. Structure-activity modeling and gene expression analysis suggest that the potential of an ENP to enhance susceptibility to S. pneumoniae is driven by its propensity to induce oxidative stress and reprogram macrophage activation responses. Our results demonstrate the important concept that adverse biological consequences of nanomaterials may not always be directly mediated, but can be manifested by altering susceptibility to other common environmental exposures. The current study warrants careful consideration of these biological endpoints of susceptibility from both a mechanistic and hazard assessment framework for engineered nanoparticles.

engineered nanoparticle, pneumonia susceptibility,↗

Silica nanocluster binding rate coefficients from molecular dynamics trajectory calculations

Oxide nanoparticle growth from vapor phase precursors occurs in high temperature aerosol reactors first via the formation of nanoclusters, which are nanometer-scale condensed-phase species composed of 10 1 -10 2 atoms. The binding rate for nanoclusters, defined as the rate at which two nanoclusters collide with and stick to one another, is hence of interest in predicting nanoparticle size distribution functions in an aerosol. We have utilized molecular dynamics (MD) trajectory calculations to determine the homogeneous (equal-sized) and heterogeneous (disparate-sized) binding rate coefficients of SiO2 (silica) nanoclusters composed of 18, 144, and 333 atoms. MD trajectory calculations incorporated all-atom models of nanoclusters using a combined Born–Huggins–Mayer-Lennard-Jones potential model, which accounts for both short range interactions and electrostatic interactions. MD calculations were utilized to determine the binding probability as a function of both initial relative velocity and impact parameter; integration of the binding probability across impact parameter and relative velocity space yields the binding rate coefficient. MD trajectory calculations reveal that the most common type of encounters between nanoclusters leading to binding are grazing collisions, i.e. instances where collision would not occur without induced dipole potential influences. The resulting binding rate coefficients are found to be extremely weakly dependent on system temperature, which is in contrast to the use of rate coefficient models which are the product of a hard-sphere collision rate coefficient and a constant enhancement factor (leading to a rate coefficient proportional to the square root of temperature). Enhancement factors defined from MD trajectory calculations fall in the range of 3–9 as system temperature decreases from 1500 K to 300 K. Furthermore, such large values suggest that potential interactions need to be considered when modeling oxide nanocluster growth in the gas phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Active Site of Nickel Phosphide Catalysts for the Hydrodesulfurization of 4,6-DMDBT

Ni2P catalysts supported on SiO2 and MCM-41 were prepared by temperature-programmed reduction (TPR), and the effect of the dispersion on catalyst structure and hydroprocessing performance was studied. The surface areas of the samples varied from low (Ni2P/SiO2-L, 88 m2 g?1) to high (Ni2P/SiO2-H, 240 m2 g?1), to very high (Ni2P/MCM-41, 487 m2 g?1), with corresponding Ni2P average crystallite sizes decreasing from 10.1 to 6.5 and 3.8 nm. X-ray diffraction (XRD) and extended X-ray absorption fine structure (EXAFS) studies were used to obtain structural parameters for the supported Ni2P phase. The catalytic activity in hydrodesulfurization (HDS) was measured at 613 K and 3.1 MPa in a three-phase fixed bed reactor using a model liquid feed containing 4, 6-dimethyldibenzothiophene (4, 6-DMDBT) and quinoline in a tridecane solvent. At standard conditions using 500 ppm S as 4, 6-DMDBT, 6000 ppm S as dimethyldisulfide (DMDS), and 500 ppm N as quinoline, the catalytic activity followed the sequence Ni2P/MCM-41 > Ni2P/SiO2-H > Ni2P/SiO2-L, based on equal sites (230 ?mol) loaded in the reactor. In particular, Ni2P/MCM-41 gave an HDS conversion of 90%, which was much higher than that of a commercial Ni-Mo-S/Al2O3 catalyst which gave an HDS conversion of 68%, based on equal number of sites (230 ?mol) loaded in the reactor. The sites were counted by CO chemisorption for the phosphide and by low-temperature O2 chemisorption for the sulfide. EXAFS analysis of the samples confirmed the presence of two types of sites, tetrahedral Ni(1) sites and square pyramidal Ni(2) sites, with the latter growing in number in the same order as the reactivity Ni2P/MCM-41 > Ni2P/SiO2-H > Ni2P/SiO2-L, as the crystallite size decreased. From the selectivity to the direct desulfurization (DDS) product (dimethylbiphenyl) and the hydrogenation (HYD) products (methylcyclohexyltoluenes and dimethylbicyclohexyls) it is concluded that the Ni(1) sites are responsible for DDS while the Ni(2) are highly active sites for the HYD route.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mössbauer Spectroscopy Investigation and Hydrodesulfurization Properties of Iron–nickel Phosphide Catalysts

Unsupported and silica-supported FexNi2-xPy catalysts having a range of metal compositions (0 < x 6 2.0) were investigated using Mössbauer spectroscopy, and the results correlated with the surface and hydrodesulfurization (HDS) properties of the supported catalysts. Mössbauer spectroscopy permits determination of the relative site occupancy of Fe atoms in tetrahedral (M(1)) and pyramidal (M(2)) sites in the FexNi2-xPy materials. Fe atoms preferentially occupy M(2) sites for materials with significant Fe contents (x > ~0.60), but the Fe site preference reverses as the Fe content decreases (x < ~0.60). Similar occupation trends are observed for the unsupported and silica-supported FexNi2-xPy materials. Thiophene HDS measurements of the FexNi2-xPy/SiO2 catalysts revealed catalysts with high Fe contents (0.80 6 x 6 2.00) to have low activities, while the activities of Ni-rich catalysts increased dramatically with increased Ni content (0.03 6 x 6 0.60). The highest HDS activity was measured for a catalyst having a nominal precursor composition of Fe0.03Ni1.97P2.00/SiO2; this catalyst was 40% more active than a optimized nickel phosphide catalyst prepared from a precursor having a nominal composition of Ni2.00P1.60/SiO2. The 25 wt.% Fe0.03Ni1.97P2.00/SiO2 catalyst also had a dibenzothiophene HDS activity just over 10% higher than that of the 25 wt.% Ni2.00P1.60/SiO2 catalyst at 548 K. The trend of increasing HDS activity for the FexNi2-xPy/ SiO2 catalysts correlates with preferential Fe occupation of M(1) sites (and, therefore, Ni occupation of M(2) sites). Supported by X-ray photoelectron spectroscopy and oxygen chemisorption measurements, we conclude that the high activity of Ni-rich FexNi2-xPy/SiO2 catalysts can be traced to a high surface density of Ni in M(2) sites that are resistant to site blockage due to S incorporation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗