SEARCH · Search NASA

Results for “Simplifications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Electric propulsion cost estimation

A parametric cost model for mercury ion propulsion modules is presented. A detailed work breakdown structure is included. Cost estimating relationships were developed for the individual subsystems and the nonhardware items (systems engineering, software, etc.). Solar array and power processor unit (PPU) costs are the significant cost drivers. Simplification of both of these subsystems through applications of advanced technology (lightweight solar arrays and high-efficiency, self-radiating PPUs) can reduce costs. Comparison of the performance and cost of several chemical propulsion systems with the Hg ion module are also presented. For outer-planet missions, advanced solar electric propulsion (ASEP) trip times and O2/H2 propulsion trip times are comparable. A three-year trip time savings over the baselined NTO/MMH propulsion system is possible with ASEP.

Palaszewski, B. A.↗

NASA NTRS1985

Decluttering methods for high density computer-generated graphic displays

Several decluttering methods were compared with respect to the speed and accuracy of user performance which resulted. The presence of a map background was also manipulated. Partial removal of nonessential graphic features through symbol simplification was as effective a decluttering technique as was total removal of nonessential graphic features. The presence of a map background interacted with decluttering conditions when response time was the dependent measure. Results indicate that the effectiveness of decluttering methods depends upon the degree to which each method makes essential graphic information distinctive from nonessential information. Practical implications are discussed.

Schultz, E. E., Jr.↗

NASA NTRS1985

Optimization studies for the development of adaptive wall wind tunnel

The development of adaptive wall wind tunnels makes it possible to establish interference-free boundaries in the region of the model. It is, therefore, feasible to simulate free air conditions. However, the amount of total testing time involved in establishing the required conditions and the complexity of the needed instrumentation prevent currently the use of such methods for routine production testing. Optimization studies have been proposed with the objective to find approaches which will make a more extended application of adaptive wall techniques possible. A new 25cm x 11cm adaptive wall test section was designed and installed to carry out some of these studies. Investigations envisaged are related to the development of a one step convergence method to reduce total testing time, and to measurement procedures which will permit a simplification of the instrumentation. Attention is given to the proposed concept, the test section, instrumentation, and the influence coefficients.

Bodapati, S.↗

NASA NTRS1985

Two locations, two times, and the element set

A robust analytical formulation is developed to apply classical initial orbital determination to artificial satellites whose locations are uncertain to about 1 cu km and separated in time by no more than 30 min. An analytical simplification reduces Gauss's method, iteration on the semilatus rectum, iteration on the true anomaly, and the Lambert-Euler technique, to the solution of a single equation in one unknown, instead of the usual coupled triplet of three equations in three unknowns. The method is demonstrated for all common artificial satellite orbits over a variety of time intervals between the two location vectors, and for a varied set of position and distance errors.

Taff, L. G.↗

NASA NTRS1985

High-speed compressible flow and other advection-dominated problems of fluid dynamics

Finite element methods are described for modeling high speed compressible flows with strong advection, problems important to aerodynamics. The situations are characterized by high pressure and temperature gradients, transients and the appearance of discontinuities, factors which require mesh refinement during computations. Techniques are developed for temporal and spatial discretization of a model problem. Several observations are made regarding the explicit and implicit features of the calculations, the use of the Lax-Wendroff scheme to produce a mass-matrix for obtaining accurate results for transients, methods of performing stability analyses, and simplification techniques. Examples are provided of solving the nonlinear shallow-water equations and describing compressible flows, particularly transonic flows. Domain splitting is defined for improving the calculations at each time step and in different parts of the flow regime while simultaneously advancing the calculations towards a solution.

Zienkiewicz, O. C.↗

NASA NTRS1986

On the flight dynamics of aeroelastic vehicles

The nonlinear equations of motion for an elasic airplane are developed from first principles. Lagrange's Equation and the Principle of Virtual Work are used to generate the equations of motion and strip theory is then employed to obtain closed form integral expressions for the generalized forces. The inertial coupling is minimized by appropriate choice of the body reference axes and by making use of free vibration modes of the body. In addition, particular attention is paid to the simplifying assumptions used during the development of the equations of motion. A unique aspect of this modeling process is that since the generalized aerodynamic forces are determined from closed form, analytic expressions, this method can be used to gain insight into the effects of parameter variations not easily obtained from numerical models. A numerical example is also presented in which the modeling method is applied to a representative elastic aircraft. The model is used to address the effects of aerodynamic coupling which occurs between the rigid body degrees of freedom and the elastic degrees of freedom. Finally, model simplification is addressed and two methods are evaluated. The resulting frequency responses are compared.

Schmidt, D. K.↗

NASA NTRS1987

Acoustic Levitation With One Transducer

Higher resonator modes enables simplification of equipment. Experimental acoustic levitator for high-temperature containerless processing has round cylindrical levitation chamber and only one acoustic transducer. Stable levitation of solid particle or liquid drop achieved by exciting sound in chamber to higher-order resonant mode that makes potential well for levitated particle or drop at some point within chamber.

Barmatz, Martin B.↗

NASA NTRS1987

Control and Simulation of Space-Station Vibrations

Adaptive control system reduces effects of model uncertainties. Report outlines method for finite-element dynamic analysis of space station. Purpose is to determine periods and modes of oscillation of structure and to analyze effect of proposed adaptive control system to damp out unwanted vibrations. With simplifications proposed, finite-element simulations performed during dynamic event, like docking of Space Shuttle, and used to control vibration-damping actuators.

Ih, Che-Hang Charles↗

NASA NTRS1987

Empirical modeling of the thermosphere: An overview

A summary is given of thermospheric density modeling history and standard atmospheres. In particular, the approaches of the Jacchia and MSIS models were compared and contrasted. It was concluded that the Jacchia models are best if drag is the primary concern. MSIS is superior for variations in composition and temperature variations and comparison with theoretical models is facilitated by the use of spherical harmonics, which also provide a simple and consistent way of obtaining simplifications. Advantages and disadvantages of both models are listed and discussed.

Hedin, A.↗

NASA NTRS1987

Synthetic aperture radar signal processing on the MPP

Satellite-borne Synthetic Aperture Radars (SAR) sense areas of several thousand square kilometers in seconds and transmit phase history signal data several tens of megabits per second. The Shuttle Imaging Radar-B (SIR-B) has a variable swath of 20 to 50 km and acquired data over 100 kms along track in about 13 seconds. With the simplification of separability of the reference function, the processing still requires considerable resources; high speed I/O, large memory and fast computation. Processing systems with regular hardware take hours to process one Seasat image and about one hour for a SIR-B image. Bringing this processing time closer to acquisition times requires an end-to-end system solution. For the purpose of demonstration, software was implemented on the present Massively Parallel Processor (MPP) configuration for processing Seasat and SIR-B data. The software takes advantage of the high processing speed offered by the MPP, the large Staging Buffer, and the high speed I/O between the MPP array unit and the Staging Buffer. It was found that with unoptimized Parallel Pascal code, the processing time on the MPP for a 4096 x 4096 sample subset of signal data ranges between 18 and 30.2 seconds depending on options.

Ramapriyan, H. K.↗

NASA NTRS1987

EOS: A project to investigate the design and construction of real-time distributed Embedded Operating Systems

Project EOS is studying the problems of building adaptable real-time embedded operating systems for the scientific missions of NASA. Choices (A Class Hierarchical Open Interface for Custom Embedded Systems) is an operating system designed and built by Project EOS to address the following specific issues: the software architecture for adaptable embedded parallel operating systems, the achievement of high-performance and real-time operation, the simplification of interprocess communications, the isolation of operating system mechanisms from one another, and the separation of mechanisms from policy decisions. Choices is written in C++ and runs on a ten processor Encore Multimax. The system is intended for use in constructing specialized computer applications and research on advanced operating system features including fault tolerance and parallelism.

Campbell, R. H.↗

NASA NTRS1987

The absolute radiometric calibration of the advanced very high resolution radiometer

The early results of an absolute radiometric calibration of the NOAA-9 AVHRR sensor indicate significant degradations in the response of bands 1 and 2 compared to prelaunch values. The results are currently in the process of being verified and it may be that refinements of the methodology will be in order as additional data sets are analyzed. The LANDSAT TM calibration used in this approach is known to be very precise and the Herman radiative transfer code, supplemented by the 5-S code for gaseous transmission, is reliable as well. The extent to which other steps in the analysis procedure give rise to uncertainties in the results is currently under investigation. Particular attention is being given to the geometric matching of the AVHRR and TM imagery, as well as to the spectral redistribution procedure. By taking advantage of a reasonably precise calibration of TM imagery acquired on the same day as the AVHRR data at White Sands, a promising approach to the in-orbit calibration of AVHRR sensors is being developed. Current efforts involve primarily the examination of additional test cases and the investigation of possible simplifications in the procedure through judicious use of atmospheric models.

Slater, P. N.↗

NASA NTRS1987

Thermo-elasto-viscoplastic analysis of problems in extension and shear

The problems of extension and shear behavior of structural elements made of carbon steel and subjected to large thermomechanical loads are investigated. The analysis is based on nonlinear geometric and constitutive relations, and is expressed in a rate form. The material constitutive equations are capable of reproducing all nonisothermal, elasto-viscoplastic characteristics. The results of the test problems show that: (1) the formulation can accommodate very large strains and rotations; (2) the model incorporates the simplification associated with rate-insensitive elastic response without losing the ability to model a rate-temperature dependent yield strength and plasticity; and (3) the formulation does not display oscillatory behavior in the stresses for the simple shear problem.

Riff, R.↗

NASA NTRS1986

Nonlocal screening in metal surfaces

Due to the effect of the nonuniform environment on the static screening of the Coulomb potential, the local-density approximation for the particle-hole interaction is found to be inadequate to determine the surface energy of simple metals. Use of the same set of single-particle states, and thus the same one-body density and the same work function, has eliminated the single-electron states in favor of the structure of the short-ranged correlations as the basis of this effect. A posteriori simplifications of the Fermi hypernetted-chain theory may be found to allow the same calculational accuracy with simpler computational tools.

Krotscheck, E.↗

NASA NTRS1986

Path-constrained rendezvous - Necessary and sufficient conditions

The problem of path-constrained rendezvous in the vicinity of a Large Space Structure (LSS) was first introduced some years ago. The present contribution to this field centers on a demonstration that the problem can be reduced from a path-constraint problem to one of end-point constraints or certain (common) LSS geometries, under the assumption of an unrestrictive upper limit on the transfer time. This finding has been made under the assumption of a circular Keplerian orbit, and has been normalized with respect to orbital semimajor axis and LSS size. In addition to demonstrating this important simplification of the path-constrained rendezvous problem, the results of numerical simulations of path-constrained transfers from point-to-point on large spherical structures in orbit are discussed, and a series of conclusions having both architectural (design) and operational implications for LSS designers/operators is derived.

Soileau, K. M.↗

NASA NTRS1986

On the symbolic manipulation and code generation for elasto-plastic material matrices

A computerized procedure for symbolic manipulations and FORTRAN code generation of elastoplastic material matrix for finite element applications is presented. Special emphasis is placed on expression simplifications during intermediate derivations, optimal code generation, and interface with the main program. A systematic procedure is outlined to avoid redundant algebraic manipulations. Symbolic expressions of the derived material stiffness matrix are automatically converted to RATFOR code which is then translated into FORTRAN statements through a preprocessor. To minimize the interface problem with the main program, a template file is prepared so that the translated FORTRAN statements can be merged into the file to form a subroutine (or a submodule). Three constitutive models; namely, von Mises plasticity, the Drucker-Prager model, and a concrete plasticity model, are used as illustrative examples.

Chang, T. Y.↗

NASA NTRS1987

Trellis coded modulation for 4800-9600 bits/s transmission over a fading mobile satellite channel

The combination of trellis coding and multiple phase-shift-keyed (MPSK) signaling with the addition of asymmetry to the signal set is discussed with regard to its suitability as a modulation/coding scheme for the fading mobile satellite channel. For MPSK, introducing nonuniformity (asymmetry) into the spacing between signal points in the constellation buys a further improvement in performance over that achievable with trellis coded symmetric MPSK, all this without increasing average or peak power, or changing the bandwidth constraints imposed on the system. Whereas previous contributions have considered the performance of trellis coded modulation transmitted over an additive white Gaussian noise (AWGN) channel, the emphasis in the paper is on the performance of trellis coded MPSK in the fading environment. The results will be obtained by using a combination of analysis and simulation. It will be assumed that the effect of the fading on the phase of the received signal is fully compensated for either by tracking it with some form of phase-locked loop or with pilot tone calibration techniques. Thus, results will reflect only the degradation due to the effect of the fading on the amplitude of the received signal. Also, we shall consider only the case where interleaving/deinterleaving is employed to further combat the fading. This allows for considerable simplification of the analysis and is of great practical interest. Finally, the impact of the availability of channel state information on average bit error probability performance is assessed.

Divsalar, Dariush↗

NASA NTRS1987

A new formulation of electromagnetic wave scattering using an on-surface radiation boundary condition approach

A new formulation of electromagnetic wave scattering by convex, two-dimensional conducting bodies is reported. This formulation, called the on-surface radiation condition (OSRC) approach, is based upon an expansion of the radiation condition applied directly on the surface of a scatterer. It is now shown that application of a suitable radiation condition directly on the surface of a convex conducting scatterer can lead to substantial simplification of the frequency-domain integral equation for the scattered field, which is reduced to just a line integral. For the transverse magnetic case, the integrand is known explicitly. For the transverse electric case, the integrand can be easily constructed by solving an ordinary differential equation around the scatterer surface contour. Examples are provided which show that OSRC yields computed near and far fields which approach the exact results for canonical shapes such as the circular cylinder, square cylinder, and strip. Electrical sizes for the examples are ka = 5 and ka = 10. The new OSRC formulation of scattering may present a useful alternative to present integral equation and uniform high-frequency approaches for convex cylinders larger than ka = 1. Structures with edges or corners can also be analyzed, although more work is needed to incorporate the physics of singular currents at these discontinuities. Convex dielectric structures can also be treated using OSRC.

Kriegsmann, Gregory A.↗