Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulation Use Case”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

A Systems-Level Perspective on Engine Ice Accretion

The accretion of ice in the compression system of commercial gas turbine engines operating in high ice water content conditions is a safety issue being studied by the aviation sector. While most of the research focuses on the underlying physics of ice accretion and the meteorological conditions in which accretion can occur, a systems-level perspective on the topic lends itself to potential near-term operational improvements. This work focuses on developing an accurate and reliable algorithm for detecting the accretion of ice in the low pressure compressor of a generic 40,000 lbf thrust class engine. The algorithm uses only the two shaft speed sensors and works regardless of engine age, operating condition, and power level. In a 10,000-case Monte Carlo simulation, the detection approach was found to have excellent capability at determining ice accretion from sensor noise with detection occurring when ice blocks an average of 6.8% of the low pressure compressor area. Finally, an initial study highlights a potential mitigation strategy that uses the existing engine actuators to raise the temperature in the low pressure compressor in an effort to reduce the rate at which ice accretes.

May, Ryan D.↗

An Approach to Detect and Mitigate Ice Particle Accretion in Aircraft Engine Compression Systems

The accretion of ice in the compression system of commercial gas turbine engines operating in high ice water content conditions is a safety issue being studied by the aviation sector. While most of the research focuses on the underlying physics of ice accretion and the meteorological conditions in which accretion can occur, a systems-level perspective on the topic lends itself to potential near-term operational improvements. This work focuses on developing an accurate and reliable algorithm for detecting the accretion of ice in the low pressure compressor of a generic 40,000 lbf thrust class engine. The algorithm uses only the two shaft speed sensors and works regardless of engine age, operating condition, and power level. In a 10,000-case Monte Carlo simulation, the detection approach was found to have excellent capability at determining ice accretion from sensor noise with detection occurring when ice blocks an average of 6.8% of the low pressure compressor area. Finally, an initial study highlights a potential mitigation strategy that uses the existing engine actuators to raise the temperature in the low pressure compressor in an effort to reduce the rate at which ice accretes.

May, Ryan D.↗

Study of Martian Polar Caps with GISS ROCKE-3D GCM

Martian polar caps consist of both H 2 O and CO 2 ice. While H 2 O ice is mainly passive on modern Mars, it may have not been the case in recent Martian history, when its obliquity was higher, or when it was changing rapidly. The distribution of ice species in the snowpack affects its physical and thermodynamic properties. In the upper layers, it determines its albedo and thermal emissivity. Thus understanding the mutual effect between these ices and their interaction with the atmosphere is crucial for understanding the evolution of Martian polar regions. In this study, we employ a newly-developed Exotic Ices snow model coupled to the NASA Goddard Institute for Space Studies (GISS) ROCKE-3D planetary General Circulation Model (GCM) [1] to study the behavior of Martian polar caps. ROCKE-3D is a planetary GCM developed at NASA GISS as an extension of its Earth climate model, modelE [2]. It has been extensively used to simulate climate of various planets, including Mars (e.g. [3,4]). The Exotic Ices snow model was specially developed for planetary applications which involve more than one condensable in the atmosphere, in which case snow can contain multiple species of ice (CO2 and H 2 O in the Mars case). For each species of ice, the model uses their proper physical properties and phase diagram, but otherwise it treats all species of ice on an equal footing. The combined effects on albedo, thermal inertia and mutual insulation are treated accordingly. The snowpack interacts with the atmospheric dust cycle, and can accumulate a prognostic amount of dust, though the effect of dust on snow properties is not currently treated explicitly, and is prescribed. In this study, we first validate our model against the modern Martial climate, for which we use mission results from Mars Climate Sounder (atmospheric temperature and dust optical depth), SPICAM on Mars Express (atmospheric water), and Viking 2 (surface pressure). We investigate the effect of snow radiative properties on CO 2 and water cycles and the ability of our model to accurately reproduce those with minimal model tuning. We then perform simulations for several obliquities from a recent Martian past, and investigate the behavior of the Martian polar caps in such conditions.

Mars↗

Small scales formation via Alfven wave propagation in compressible nonuniform media

In weakly dissipative media governed by the magnetohydrodynamics (MHD) equations, any efficient mechanism of energy dissipation requires the formation of small scales. The possibility to produce small scales has been studied by Malara et al. in the case of MHD disturbances propagating in an incompressible and inhomogeneous medium, for a strictly 2D geometry. We extend the work of Malara et al. to include both compressibility and the third component for vector quantities. Using numerical simulations we show that, when an Alfven wave propagates in a compressible nonuniform medium, the two dynamical effects responsible for the small scales formation in the incompressible case are still at work: energy pinching and phase-mixing. Moreover, the interaction between the initial Alfven wave and the inhomogeneity gives rise to the formation of compressible perturbations (fast and slow waves or a static entropy wave). Some of these compressive fluctuations are subject to the steepening of the wave front and become shock waves, which are extremely efficient in dissipating their energy, their dissipation being independent of the Reynolds number. A rough estimate of the typical times which the various dynamical processes take to produce small scales and then to dissipate the energy show that these times are consistent with those required to dissipate inside the solar corona the energy of Alfven waves of photospheric origin.

Malara, F.↗

Assessment of Polarization Effect on Efficiency of Levenberg-Marquardt Algorithm in Case of Thin Atmosphere Over Black Surface

The Levenberg-Marquardt algorithm [1, 2] provides a numerical iterative solution to the problem of minimization of a function over a space of its parameters. In our work, the Levenberg-Marquardt algorithm retrieves optical parameters of a thin (single scattering) plane parallel atmosphere irradiated by collimated infinitely wide monochromatic beam of light. Black ground surface is assumed. Computational accuracy, sensitivity to the initial guess and the presence of noise in the signal, and other properties of the algorithm are investigated in scalar (using intensity only) and vector (including polarization) modes. We consider an atmosphere that contains a mixture of coarse and fine fractions. Following [3], the fractions are simulated using Henyey-Greenstein model. Though not realistic, this assumption is very convenient for tests [4, p.354]. In our case it yields analytical evaluation of Jacobian matrix. Assuming the MISR geometry of observation [5] as an example, the average scattering cosines and the ratio of coarse and fine fractions, the atmosphere optical depth, and the single scattering albedo, are the five parameters to be determined numerically. In our implementation of the algorithm, the system of five linear equations is solved using the fast Cramer s rule [6]. A simple subroutine developed by the authors, makes the algorithm independent from external libraries. All Fortran 90/95 codes discussed in the presentation will be available immediately after the meeting from sergey.v.korkin@nasa.gov by request.

Korkin, S.↗

An Approach to Detect and Mitigate Ice Particle Accretion in Aircraft Engine Compression Systems

The accretion of ice in the compression system of commercial gas turbine engines operating in high ice water content conditions is a safety issue being studied by the aviation sector. While most of the research focuses on the underlying physics of ice accretion and the meteorological conditions in which accretion can occur, a systems-level perspective on the topic lends itself to potential near-term operational improvements. This work focuses on developing an accurate and reliable algorithm for detecting the accretion of ice in the low pressure compressor of a generic 40,000 lbf thrust class engine. The algorithm uses only the two shaft speed sensors and works regardless of engine age, operating condition, and power level. In a 10,000-case Monte Carlo simulation, the detection approach was found to have excellent capability at determining ice accretion from sensor noise with detection occurring when ice blocks an average of 6.8 percent of the low pressure compressor area. Finally, an initial study highlights a potential mitigation strategy that uses the existing engine actuators to raise the temperature in the low pressure compressor in an effort to reduce the rate at which ice accretes.

May, Ryan D.↗

Verification of Viscous Goal-Based Anisotropic Mesh Adaptation

Adaptive unstructured mesh techniques have a limited, but growing impact on production analysis workflows where the control of discretization error is critical to obtaining reliable simulation results. Recent progress has matured a number of independent implementations of flow solvers, error estimation methods, and anisotropic mesh adaptation mechanics. Anisotropic metric construction methods are evaluated with analytically defined primal and adjoint fields. This allows the comparison of different metric formulations and different implementations of the same formulation without the complications of a flow and adjoint solution method. Unstructured mesh adaptation tools are verified by comparison on analytic primal and dual field before verification on benchmark aerodynamics cases. The documentation of these verification exercises helps to prepare these goal-based methods for routine use in production simulation workflows.

Mesh adaptation↗

Intercomparison of Large-Eddy Simulations of Arctic Mixed-Phase Clouds: Importance of Ice Size Distribution Assumptions

Large-eddy simulations of mixed-phase Arctic clouds by 11 different models are analyzed with the goal of improving understanding and model representation of processes controlling the evolution of these clouds. In a case based on observations from the Indirect and Semi-Direct Aerosol Campaign (ISDAC), it is found that ice number concentration, Ni, exerts significant influence on the cloud structure. Increasing Ni leads to a substantial reduction in liquid water path (LWP), in agreement with earlier studies. In contrast to previous intercomparison studies, all models here use the same ice particle properties (i.e., mass-size, mass-fall speed, and mass-capacitance relationships) and a common radiation parameterization. The constrained setup exposes the importance of ice particle size distributions (PSDs) in influencing cloud evolution. A clear separation in LWP and IWP predicted by models with bin and bulk microphysical treatments is documented and attributed primarily to the assumed shape of ice PSD used in bulk schemes. Compared to the bin schemes that explicitly predict the PSD, schemes assuming exponential ice PSD underestimate ice growth by vapor deposition and overestimate mass-weighted fall speed leading to an underprediction of IWP by a factor of two in the considered case. Sensitivity tests indicate LWP and IWP are much closer to the bin model simulations when a modified shape factor which is similar to that predicted by bin model simulation is used in bulk scheme. These results demonstrate the importance of representation of ice PSD in determining the partitioning of liquid and ice and the longevity of mixed-phase clouds.

clouds↗

LAVA Simulations for the AIAA Sonic Boom Prediction Workshop

Computational simulations using the Launch Ascent and Vehicle Aerodynamics (LAVA) framework are presented for the First AIAA Sonic Boom Prediction Workshop test cases. The framework is utilized with both structured overset and unstructured meshing approaches. The three workshop test cases include an axisymmetric body, a Delta Wing-Body model, and a complete low-boom supersonic transport concept. Solution sensitivity to mesh type and sizing, and several numerical convective flux discretization choices are presented and discussed. Favorable comparison between the computational simulations and experimental data of nearand mid-field pressure signatures were obtained.

Simulations↗

Progress in the Large-Eddy Simulation of an Asymmetric Plane Diffuser

The flow through a plane asymmetric diffuser is a good test case for assessing the capability of LES since it contains features such as large scale unsteady separation and strong intermittency which are difficult to capture using conventional modeling approaches. Previous attempts to simulate this flow (Kaltenbach, 1994) have significantly underpredicted the extent of separation. The objective of the present research is to understand why the previous simulations did not predict the flow separation correctly. This study focuses on mesh refinement and matching of the inlet velocity profile. In order to perform this study, the flow solver of Kaltenbach (1994) was modified to increase its accuracy and efficiency. The improved algorithm allows for better resolution at affordable CPU cost.

Fatica, Massimiliano↗

Reynolds-Stress Budgets in an Impinging Shock Wave/Boundary-Layer Interaction

Implicit large-eddy simulation (ILES) of a shock wave/boundary-layer interaction (SBLI) was performed. Comparisons with experimental data showed a sensitivity of the current prediction to the modeling of the sidewalls. This was found to be common among various computational studies in the literature where periodic boundary conditions were used in the spanwise direction, as was the case in the present work. Thus, although the experiment was quasi-two-dimensional, the present simulation was determined to be two-dimensional. Quantities present in the exact equation of the Reynolds-stress transport, i.e., production, molecular diffusion, turbulent transport, pressure diffusion, pressure strain, dissipation, and turbulent mass flux were calculated. Reynolds-stress budgets were compared with past large-eddy simulation and direct numerical simulation datasets in the undisturbed portion of the turbulent boundary layer to validate the current approach. The budgets in SBLI showed the growth in the production term for the primary normal stress and energy transfer mechanism was led by the pressure strain term in the secondary normal stresses. The pressure diffusion term, commonly assumed as negligible by turbulence model developers, was shown to be small but non-zero in the normal stress budgets, however it played a key role in the primary shear stress budget.

shock wave/boundary-layer interactio↗

The analysis of delays in simulator digital computing systems. Volume 1: Formulation of an analysis approach using a central example simulator model

The effects of spurious delays in real time digital computing systems are examined. Various sources of spurious delays are defined and analyzed using an extant simulator system as an example. A specific analysis procedure is set forth and four cases are viewed in terms of their time and frequency domain characteristics. Numerical solutions are obtained for three single rate one- and two-computer examples, and the analysis problem is formulated for a two-rate, two-computer example.

Heffley, R. K.↗

A pilot in the loop analysis of helicopter acceleration/deceleration maneuvers

Helicopter flight acceleration/deceleration maneuvers are quantified and put to use in the fields of handling qualities, flight training and evaluation of simulator fidelity. The three specific cases include the normal speed change maneuver, the nap-of-the-Earth dash/quickstop, and the decelerating approach to hover. All of these maneuvers share common generic features in terms of pilot adaptation and mathematical description; yet each differs in terms of the essential feedback loop structure, implications for handling qualities requirements, and simulator fidelity criteria.

Heffley, R. K.↗

Conductive damping of coronal motions

Time-dependent motions in the solar corona are subject to modification through conductive transport of thermal energy away from compression regions and into rarefaction regions. The evolution depends on how the energy is introduced - by an essentially thermal perturbation or by a density perturbation. The net effect of thermal conduction is to convert local kinetic energy in the transient into widely distributed thermal energy, which then may in turn be partially converted into kinetic energy of the bulk flow. Local motion in the transient is thereby damped. These effects are modeled here using a numerical solution of the time-dependent solar wind equations for single-fluid thermally conductive flow. The simulations of transient phenomena are made for ordinary collisional thermal conduction and compared with similar simulations done using polytropic flow. Between one and five solar radii, the gross character in the two cases is very similar. However, there are effects with thermal conduction that cannot be modeled with polytropic flow, illustrated here by temperature and velocity forerunners and a delayed and large-amplitude trailing velocity low. If thermal conduction is artificially inhibited by simple reduction of the thermal conduction coefficient, relative velocity amplitudes remain larger in approximate proportion to the amount the coefficient is reduced.

Suess, S. T.↗

Crew coordination concepts: Continental Airlines CRM training

The outline of the crew coordination concepts at Continental airlines is: (1) Present relevant theory: Contained in a pre-work package and in lecture/discussion form during the work course, (2) Discuss case examples: Contained in the pre-work for study and use during the course; and (3) Simulate practice problems: Introduced during the course as the beginning of an ongoing process. These concepts which are designed to address the problem pilots have in understanding the interaction between situations and their own theories of practice are briefly discussed.

Christian, Darryl↗

The structure of the vorticity field in homogeneous turbulent flows

The structures of the vorticity fields in several homogeneous irrotational straining flows and a homogeneous turbulent shear flow were examined using a database generated by direct numerical simulation of the unsteady Navier-Stokes equations. In all cases, strong evidence was found for the presence of coherent vortical structures. The initially isotropic vorticity fields were rapidly affected by imposed mean strain and the rotational component of mean shear and developed accordingly. In the homogeneous turbulent shear-flow cases, the roll-up of mean vorticity into characteristic hairpin vortices was clearly observed, supporting the view that hairpin vortices are an important vortical structure in all turbulent shear flows; the absence of mean shear in the homogeneous irrotational straining flows precludes the presence of hairpin-like vortices.

Rogers, Michael M.↗

Vapor condensation on a turbulent liquid interface

An experimental investigation which seeks the fundamental relationship between the interfacial condensation rate and the parameters which control it when the liquid side is turbulent is discussed. The scaling laws for free-surface condensation are discussed for this case. It is argued that the condensation of cryogenic liquids can, in principle, be simulated in experiments using steam and water. Data are presented for the condensation rate in terms of the dimensionless scaling parameters which involve the fluid properties and the liquid-side turbulence velocity and length scales.

Helmick, M. R.↗

Polar cap deflation during magnetospheric substorms

The expanding/contracting polar cap model has been used to simulate DE-2 ion drift data during substorms as determined using the AL index. Of the 39 cases modeled, 57 percent required the opening of a nightside gap which maps to where reconnection occurs in the tail; 75 percent of the 16 recovery phase cases required a nightside gap, while only 29 percent of the 17 expansion phase cases required a nightside gap. On the basis of this result, it is concluded that if a nightside gap implies tail reconnection, then reconnection probably occurs after expansion phase onset and continues throughout most of the recovery phase of a substorm.

Moses, J. J.↗