Search NASA⌕ Search

SEARCH · Search NASA

Results for “THICKNESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Thickness dependence of the charge-density-wave transition temperature in VSe{sub 2}

A set of three-dimensional charge-density-wave (3D CDW) VSe{sub 2} nano-flakes with different thicknesses were obtained by the scotch tape-based micro-mechanical exfoliation method. Resistivity measurements showed that the 3D CDW transition temperature T{sub p} decreases systematically from 105 K in bulk to 81.8 K in the 11.6 nm thick flake. The Hall resistivity ρ{sub xy} of all the flakes showed a linear dependent behavior against the magnetic field with a residual electron concentration of the order of ∼10{sup 21} cm{sup −3} at 5 K. The electron concentration n increases slightly as the thickness d decreases, possibly due to the CDW gap is reduced with the decrease of the thickness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quasi-Rayleigh waves in butt-welded thick steel plate

This paper discusses theoretical and experimental analyses of weld guided surface acoustic waves (SAW) through the guided wave propagation (GWP) analyses. The GWP analyses have been carried out by utilizing piezoelectric wafer active sensors (PWAS) for in situ structural inspection of a thick steel plate with butt weld as the weld bead is ground flush. Ultrasonic techniques are commonly used for validation of welded structures in many in-situ monitoring applications, e.g. in off-shore structures, in nuclear and pressure vessel industries and in a range of naval applications. PWAS is recently employed in such ultrasonic applications as a resonator as well as a transducer. Quasi-Rayleigh waves a.k.a. SAW can be generated in relatively thick isotropic elastic plate having the same phase velocity as Rayleigh waves whereas Rayleigh waves are a high frequency approximation of the first symmetric (S0) and anti-symmetric (A0) Lamb wave modes. As the frequency becomes very high the S0 and the A0 wave speeds coalesce, and both have the same value. This value is exactly the Rayleigh wave speed and becomes constant along the frequency i.e. Rayleigh waves are non-dispersive guided surface acoustic waves. The study is followed with weld-GWP tests through the pitch-catch method along the butt weld line. The tuning curves of quasi-Rayleigh wave are determined to show the tuning and trapping effect of the weld bead that has higher thickness than the adjacent plates on producing a dominant quasi-Rayleigh wave mode. The significant usage of the weld tuned and guided quasi-Rayleigh wave mode is essentially discussed for the applications in the in-situ inspection of relatively thick structures with butt weld such as naval offshore structures. The paper ends with summary, conclusions and suggestions for future work.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of strain and thickness on the transition temperature of epitaxial FeRh thin-films

The separate effects of strain and film thickness on the antiferromagnetic-to-ferromagnetic phase transition temperature of FeRh thin films by both experiment and density functional calculations were determined. Strain was introduced by epitaxial growth onto MgO, SrTiO 3 , and KTaO 3 substrates. Film thicknesses below 15 nm substantially suppress the transition temperature, T, to below room temperature in unstrained films. For strained films, tensile/compressive strain decreases/increases T, respectively. KTaO 3 (001) substrates produce sufficient compressive strain to increase the transition temperature of 10 nm FeRh films above room temperature, which is useful for many proposed applications previously limited by the stabilization of the ferromagnetic state at small thicknesses. These results demonstrate that a judicious use of film thickness and substrate can be used to manipulate FeRh's transition temperature over a ~200 K range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Insights into the magnetic dead layer in La 0.7 Sr 0.3 MnO 3 thin films from temperature, magnetic field and thickness dependence of their magnetization

Experimental investigations of the magnetic dead layer in 7.6 nm thick film of La 0.7 Sr 0.3 MnO 3 (LSMO) are reported. The dc magnetization ( M ) measurements for a sample cooled to T = 5 K in applied field H = 0 reveal the presence of negative remanent magnetization (NRM) in the M vs. H (magnetic field) measurements as well as in the M vs. T measurements in H = 50 Oe and 100 Oe. The M vs. T data in ZFC (zero-field-cooled) and FC (field-cooled) protocols are used to determine the blocking temperature T B in different H . Isothermal hysteresis loops at different T are used to determine the temperature dependence of saturation magnetization ( M S ), remanence (MR) and coercivity HC. The M S vs. T data are fit to the Bloch law, M S ( T ) = M 0 ( 1 – BT 3/2 ), showing a good fit for T < 100 K and yielding the nearest-neighbor exchange constant J/k B ≅ 18 K. The variations of T B vs. H and H C vs. T are well described by the model often used for randomly oriented magnetic nanoparticles with magnetic domain diameter ≈ 9 nm present in the dead-layer of thickness d =1.4 nm. Finally, the data available from literature on the thickness ( D ) variation of Curie temperature ( T C ) and M S of LSMO films grown under 200, 150, and 0.38 mTorr pressures of O 2 are analyzed in terms of the finite-size scaling, with M S vs. D data fit to M S ( D ) = M S (b)(1-d / D ) yielding the dead layer thickness d = 1.1 nm, 1.4 nm and 2.4 nm respectively. Brief discussion on the significance of these results is presented.

36 MATERIALS SCIENCE↗

Area and thickness dependence of Auger recombination in nanoplatelets

The ability to control both the thickness and the lateral dimensions of colloidal nanoplatelets offers a test-bed for area and thickness dependent properties in 2D materials. An important example is Auger recombination, which is typically the dominant process by which multiexcitons decay in nanoplatelets. In this report, we uncover fundamental properties of biexciton decay in nanoplatelets by comparing the Auger recombination lifetimes based on interacting and noninteracting formalisms with measurements based on transient absorption spectroscopy. Specifically, we report that electron-hole correlations in the initial biexcitonic state must be included in order to obtain Auger recombination lifetimes in agreement with experimental measurements and that Auger recombination lifetimes depend nearly linearly on the lateral area and somewhat more strongly on the thickness of the nanoplatelet. We also connect these scalings to those of the area and thickness dependencies of single exciton radiative recombination lifetimes, exciton coherence areas, and exciton Bohr radii in these quasi-2D materials.

2D materials↗

Reduction of efficiency droop in c -plane InGaN/GaN light-emitting diodes using a thick single quantum well with doped barriers

We report on c-plane InGaN/GaN single quantum well (QW) light-emitting diodes (LEDs) of different well widths (3 or 9 nm) with and without doped barriers. QW barriers were doped with the aim of reducing the internal electric field (F QW ) in the QW to increase the electron-hole overlap, therefore increasing the recombination rates and resulting in the reduction of the efficiency droop. We, indeed, observed, through biased photocurrent spectroscopy, a reduction in F QW with doped barriers, with F QW being in the same direction of the p-n junction field at zero bias as opposed to the junction field for LEDs without doped barriers. Even with the improvement in the ground state wavefunction overlap, the ground state transition rate remains low for thick QWs. Transitions through excited states were observed for both thick QW LEDs with and without doped barriers. Here, the thick QW LED without doped barriers displayed low external quantum efficiency (EQE), likely as a result of the carrier overflow due to the poor confinement of carriers in the excited states. On the other hand, for LEDs with doped barriers, the flatter band in the QW resulting from the lower F QW reduces the energy separation between the eigenstates, leading to better confinement of carriers in the excited states. With doped barriers, we demonstrated a low efficiency droop 9-nm-thick single QW LED with a peak EQE of 42% at 40 A/cm 2 and an EQE of 36% at 400 A/cm 2 .

42 ENGINEERING↗

Optically thick GaInAs/GaAsP strain-balanced quantum-well tandem solar cells with 29.2% efficiency under the AM0 space spectrum

GaAs is often used as a multijunction subcell due to its high material quality on GaAs substrates, despite having a non-optimal bandgap. The bandgap can be beneficially reduced using many layers of thin, strain-balanced GaInAs in a superlattice or quantum well device, but achieving excellent carrier collection without increased recombination has proven challenging. Here, we develop and demonstrate high performance, optically thick GaInAs/GaAsP strain-balanced solar cells. Excellent material quality is achieved in thick superlattices by using growth conditions that limit progressive thickness and composition fluctuations. Bandgap-voltage offsets as low as 0.31V are shown in superlattice cells using thin, highly strained GaP barriers. Optically thick superlattice cells with over 2500 nm of total GaInAs in the depletion region are developed, enabling 3.8 mA/cm 2 of extra photocurrent beyond the GaAs band edge under the AM0 space spectrum. Optimized superlattice solar cells are incorporated into two-junction devices that achieve 29.2% efficiency under the AM0 space spectrum due to their improved bandgap combination and high subcell voltages.

14 SOLAR ENERGY↗

Thickness scaling of ferroelectricity in BiFeO 3 by tomographic atomic force microscopy

Nanometer-scale 3D imaging of materials properties is critical for understanding equilibrium states in electronic materials, as well as for optimization of device performance and reliability, even though such capabilities remain a substantial experimental challenge. Tomographic atomic force microscopy (TAFM) is presented as a subtractive scanning probe technique for high-resolution, 3D ferroelectric property measurements. Volumetric property resolution below 315 nm 3 , as well as unit-cell-scale vertical material removal, are demonstrated. Specifically, TAFM is applied to investigate the size dependence of ferroelectricity in the room-temperature multiferroic BiFeO 3 across two decades of thickness to below 1 nm. TAFM enables volumetric imaging of ferroelectric domains in BiFeO 3 with a significant improvement in spatial resolution compared with existing domain tomography techniques. We additionally employ TAFM for direct, thickness-dependent measurements of the local spontaneous polarization and ferroelectric coercive field in BiFeO 3 . The thickness-resolved ferroelectric properties strongly correlate with cross-sectional transmission electron microscopy (TEM), Landau–Ginzburg–Devonshire phenomenological theory, and the semiempirical Kay–Dunn scaling law for ferroelectric coercive fields. These results provide an unambiguous determination of a stable and switchable polar state in BiFeO 3 to thicknesses below 5 nm. The accuracy and utility of these findings on finite size effects in ferroelectric and multiferroic materials more broadly exemplifies the potential for novel insight into nanoscale 3D property measurements via other variations of TAFM.

36 MATERIALS SCIENCE↗

Measurements of the 27 Al(α,n) Thick Target Yield near Threshold

In this work, we present results from direct measurements of the 27 Al(α,n) thick-target yield from laboratory incident energies E α ≈ 3 to 5 MeV, performed with the 3 HeBF 3 Giant Barrel (HeBGB) neutron detector at the Edwards Accelerator Laboratory. Our measurements have a small energy cadence in order to address discrepancies and sparseness of thick-target-yield data sets existing for this energy region. We find general agreement with existing data sets, including yields derived from cross-section data, while resolving a discrepancy between existing thick-target-yield data sets for E α ≈ 4–5 MeV. However, for E α < 3.5 MeV, our results are substantially lower than previous thick-target-yield data and somewhat larger than yields calculated from existing cross-section data. Our data complete the energy range needed for estimates of the 27 Al(α,n) contribution to neutrino and dark matter detector backgrounds and result in increased viability of 27 Al(α,n) as a plasma diagnostic tool at fusion facilities such as the National Ignition Facility.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

STRUCTURE AND KINEMATICS OF THE STELLAR HALOS AND THICK DISKS OF THE MILKY WAY BASED ON CALIBRATION STARS FROM SLOAN DIGITAL SKY SURVEY DR7

The structure and kinematics of the recognized stellar components of the Milky Way are explored, based on well-determined atmospheric parameters and kinematic quantities for 32360 'calibration stars' from the Sloan Digital Sky Survey (SDSS) and its first extension, SDSS-II, which included the sub-survey Sloan Extension for Galactic Understanding and Exploration (SEGUE). Full space motions for a sub-sample of 16,920 stars, exploring a local volume within 4 kpc of the Sun, are used to derive velocity ellipsoids for the inner- and outer-halo components of the Galaxy, as well as for the canonical thick-disk and proposed metal-weak thick-disk (MWTD) populations. This new sample of calibration stars represents an increase of 60% relative to the numbers used in a previous analysis. We first examine the question of whether the data require the presence of at least a two-component halo in order to account for the rotational behavior of likely halo stars in the local volume, and whether more than two components are needed. We also address the question of whether the proposed MWTD is kinematically and chemically distinct from the canonical thick disk, and point out that the Galactocentric rotational velocity inferred for the MWTD, as well as its mean metallicity, appear quite similar to the values derived previously for the Monoceros stream, suggesting a possible association between these structures. In addition, we consider the fractions of each component required to understand the nature of the observed kinematic behavior of the stellar populations of the Galaxy as a function of distance from the plane. Scale lengths and scale heights for the thick-disk and MWTD components are determined. Spatial density profiles for the inner- and outer-halo populations are inferred from a Jeans theorem analysis. The full set of calibration stars (including those outside the local volume) is used to test for the expected changes in the observed stellar metallicity distribution function with distance above the Galactic plane in situ, due to the changing contributions from the underlying stellar populations. The above issues are considered, in concert with theoretical and observational constraints from other Milky-Way-like galaxies, in light of modern cold dark matter galaxy formation models.

79 ASTRONOMY AND ASTROPHYSICS↗

HOT GAS IN THE GALACTIC THICK DISK AND HALO NEAR THE DRACO CLOUD

This paper examines the ultraviolet and X-ray photons generated by hot gas in the Galactic thick disk or halo in the Draco region of the northern hemisphere. Our analysis uses the intensities from four ions, C IV, O VI, O VII, and O VIII, sampling temperatures of {approx}10{sup 5} to {approx}3 x 10{sup 6} K. We measured the O VI, O VII, and O VIII intensities from FUSE and XMM-Newton data and subtracted off the local contributions in order to deduce the thick disk/halo contributions. These were supplemented with published C IV intensity and O VI column density measurements. Our estimate of the thermal pressure in the O VI-rich thick disk/halo gas, p{sub th}/k = 6500{sup +2500}{sub -2600} K cm{sup -3}, suggests that the thick disk/halo is more highly pressurized than would be expected from theoretical analyses. The ratios of C IV to O VI to O VII to O VIII intensities were compared with those predicted by theoretical models. Gas which was heated to 3 x 10{sup 6} K then allowed to cool radiatively cannot produce enough C IV or O VI-generated photons per O VII or O VIII-generated photon. Producing enough C IV and O VI emission requires heating additional gas to 10{sup 5} K < T < 10{sup 6} K. However, shock heating, which provides heating across this temperature range, overproduces O VI relative to the others. Obtaining the observed mix may require a combination of several processes, including some amount of shock heating, heat conduction, and mixing, as well as radiative cooling of very hot gas.

79 ASTRONOMY AND ASTROPHYSICS↗

THE GENESIS OF THE MILKY WAY'S THICK DISK VIA STELLAR MIGRATION

We compare the spatial, kinematic, and metallicity distributions of stars in the Milky Way disk, as observed by the Sloan Digital Sky Survey and Geneva-Copenhagen Survey, to predictions made by N-body simulations that naturally include radial migration as proposed by Sellwood and Binney. In these simulations, stars that migrate radially outward feel a decreased restoring force, consequentially they reach larger heights above the mid-plane. We find that this model is in qualitative agreement with observational data and can explain the disk's double-exponential vertical structure and other characteristics as due to internal evolution. In particular, the model reproduces observations of stars in the transition region between exponential components, which do not show a strong correlation between rotational velocity and metallicity. Although such a correlation is present in young stars because of epicyclic motions, radial migration efficiently mixes older stars and weakens the correlation. Classifying stars as members of the thin or thick disk by either velocity or metallicity leads to an apparent separation in the other property, as observed. We find a much stronger separation when using [{alpha}/Fe], which is a good proxy for stellar age. The model success is remarkable because the simulation was not tuned to reproduce the Galaxy, hinting that the thick disk may be a ubiquitous Galactic feature generated by stellar migration. Nonetheless, we cannot exclude the possibility that some fraction of the thick disk is a fossil of a more violent history, nor can radial migration explain thick disks in all galaxies, most strikingly those which counterrotate with respect to the thin disk.

79 ASTRONOMY AND ASTROPHYSICS↗

CHEMICAL ABUNDANCES OF THE MILKY WAY THICK DISK AND STELLAR HALO. I. IMPLICATIONS OF [{alpha}/Fe] FOR STAR FORMATION HISTORIES IN THEIR PROGENITORS

We present the abundance analysis of 97 nearby metal-poor (-3.3 < [Fe/H] <-0.5) stars having kinematic characteristics of the Milky Way (MW) thick disk and inner and outer stellar halos. The high-resolution, high-signal-to-noise optical spectra for the sample stars have been obtained with the High Dispersion Spectrograph mounted on the Subaru Telescope. Abundances of Fe, Mg, Si, Ca, and Ti have been derived using a one-dimensional LTE abundance analysis code with Kurucz NEWODF model atmospheres. By assigning membership of the sample stars to the thick disk, inner halo, or outer halo components based on their orbital parameters, we examine abundance ratios as a function of [Fe/H] and kinematics for the three subsamples in wide metallicity and orbital parameter ranges. We show that, in the metallicity range of -1.5 < [Fe/H] {<=}-0.5, the thick disk stars show constantly high mean [Mg/Fe] and [Si/Fe] ratios with small scatter. In contrast, the inner and the outer halo stars show lower mean values of these abundance ratios with larger scatter. The [Mg/Fe], [Si/Fe], and [Ca/Fe] for the inner and the outer halo stars also show weak decreasing trends with [Fe/H] in the range [Fe/H] >-2. These results favor the scenarios that the MW thick disk formed through rapid chemical enrichment primarily through Type II supernovae of massive stars, while the stellar halo has formed at least in part via accretion of progenitor stellar systems having been chemically enriched with different timescales.

79 ASTRONOMY AND ASTROPHYSICS↗

Photochemistry in terrestrial exoplanet atmospheres. III. Photochemistry and thermochemistry in thick atmospheres on super Earths and mini Neptunes

Some super Earths and mini Neptunes will likely have thick atmospheres that are not H{sub 2}-dominated. We have developed a photochemistry-thermochemistry kinetic-transport model for exploring the compositions of thick atmospheres on super Earths and mini Neptunes, applicable for both H{sub 2}-dominated atmospheres and non-H{sub 2}-dominated atmospheres. Using this model to study thick atmospheres for wide ranges of temperatures and elemental abundances, we classify them into hydrogen-rich atmospheres, water-rich atmospheres, oxygen-rich atmospheres, and hydrocarbon-rich atmospheres. We find that carbon has to be in the form of CO{sub 2} rather than CH{sub 4} or CO in a H{sub 2}-depleted water-dominated thick atmosphere and that the preferred loss of light elements from an oxygen-poor carbon-rich atmosphere leads to the formation of unsaturated hydrocarbons (C{sub 2}H{sub 2} and C{sub 2}H{sub 4}). We apply our self-consistent atmosphere models to compute spectra and diagnostic features for known transiting low-mass exoplanets GJ 1214 b, HD 97658 b, and 55 Cnc e. For GJ 1214 b, we find that (1) C{sub 2}H{sub 2} features at 1.0 and 1.5 μm in transmission and C{sub 2}H{sub 2} and C{sub 2}H{sub 4} features at 9-14 μm in thermal emission are diagnostic for hydrocarbon-rich atmospheres; (2) a detection of water-vapor features and a confirmation of the nonexistence of methane features would provide sufficient evidence for a water-dominated atmosphere. In general, our simulations show that chemical stability has to be taken into account when interpreting the spectrum of a super Earth/mini Neptune. Water-dominated atmospheres only exist for carbon to oxygen ratios much lower than the solar ratio, suggesting that this kind of atmospheres could be rare.

79 ASTRONOMY AND ASTROPHYSICS↗

Subtractive fabrication of ferroelectric thin films with precisely controlled thickness

The ability to control thin-film growth has led to advances in our understanding of fundamental physics as well as to the emergence of novel technologies. However, common thin-film growth techniques introduce a number of limitations related to the concentration of defects on film interfaces and surfaces that limit the scope of systems that can be produced and studied experimentally. Here, we developed an ion-beam based subtractive fabrication process that enables creation and modification of thin films with pre-defined thicknesses. To accomplish this we transformed a multimodal imaging platform that combines time-of-flight secondary ion mass spectrometry with atomic force microscopy to a unique fabrication tool that allows for precise sputtering of the nanometer-thin layers of material. To demonstrate fabrication of thin-films with in situ feedback and control on film thickness and functionality we systematically studied thickness dependence of ferroelectric switching of lead-zirconate-titanate, within a single epitaxial film. Lastly, our results demonstrate that through a subtractive film fabrication process we can control the piezoelectric response as a function of film thickness as well as improve on the overall piezoelectric response versus an untreated film.

36 MATERIALS SCIENCE↗

A de Sitter tachyon thick braneworld

Among the multiple 5D thick braneworld models that have been proposed in the last years, in order to address several open problems in modern physics, there is a specific one involving a tachyonic bulk scalar field. Delving into this framework, a thick braneworld with a cosmological background induced on the brane is here investigated. The respective field equations — derived from the model with a warped 5D geometry — are highly non-linear equations, admitting a non-trivial solution for the warp factor and the tachyon scalar field as well, in a de Sitter 4D cosmological background. Moreover, the non-linear tachyonic scalar field, that generates the brane in complicity with warped gravity, has the form of a kink-like configuration. Notwithstanding, the non-linear field equations restricting character does not allow one to easily find thick brane solutions with a decaying warp factor which leads to the localization of 4D gravity and other matter fields. We derive such a thick brane configuration altogether in this tachyon-gravity setup. When analyzing the spectrum of gravity fluctuations in the transverse traceless sector, the 4D gravity is shown to be localized due to the presence of a single zero mode bound state, separated by a continuum of massive Kaluza-Klein (KK) modes by a mass gap. It contrasts with previous results, where there is a KK massive bound excitation providing no clear physical interpretation. The mass gap is determined by the scale of the metric parameter H. Finally, the corrections to Newton's law in this model are computed and shown to decay exponentially. It is in full compliance to corrections reported in previous results (up to a constant factor) within similar braneworlds with induced 4D de Sitter metric, despite the fact that the warp factor and the massive modes have a different form.

79 ASTRONOMY AND ASTROPHYSICS↗

Physical thickness characterization of the FRIB production targets

The FRIB heavy-ion accelerator, commissioned in 2022, is a leading facility for producing rare isotope beams (RIBs) and exploring nuclei beyond the limits of stability. These RIBs are produced via reactions between stable primary beams and a graphite target. Approximately 20–40% of the primary beam power is deposited in the target, requiring efficient thermal dissipation. Currently, FRIB operates with a primary beam power of up to 20 kW. To enhance thermal dissipation efficiency, a single-slice rotating graphite target with a diameter of approximately 30 cm is employed. The effective target region is a 1 cm-wide outer rim of the graphite disc. To achieve high RIB production rates, the areal thickness variation must be constrained within 2%. This paper presents physical thickness characterizations of FRIB production targets with various nominal thicknesses, measured using a custom-built non-contact thickness measurement apparatus.

Instrumentation for radioactive beams (fragmentati↗

OBSERVATIONAL EVIDENCE FROM SDSS FOR A MERGER ORIGIN OF THE MILKY WAY'S THICK DISK

We test four competing models that aim to explain the nature of stars in spiral galaxies that are well away (>1 kpc) from the midplane, the so-called thick disk: the stars may have gotten there through orbital migration, through satellite mergers and accretion, or through heating of pre-existing thin disk stars. The eccentricity distribution of thick disk stars has recently been proposed as a diagnostic to differentiate between these mechanisms. Drawing on SDSS data release 7, we have assembled a sample of 31,535 G-dwarfs with six-dimensional phase-space information and metallicities and have derived the orbital eccentricities for them. Comparing the resulting eccentricity distributions, p(e|z), with these particular simulations, we find that: (1) the observed p(e|z) is inconsistent with that predicted by orbital migration only, as there are more observed stars of high and of very low eccentricity; (2) simulations in which the thick disk is made predominantly through heating a pre-existing thin disk are also inconsistent, as they predict more high-eccentricity stars than observed; (3) the observed p(e|z) fits well with a 'gas-rich merger' scenario, where most thick disk stars were born in situ. Further modeling could explore whether the data-simulation inconsistencies found here for the first three cases actually rule out the qualitative scenarios underlying these simulations.

79 ASTRONOMY AND ASTROPHYSICS↗