Search NASA⌕ Search

SEARCH · Search NASA

Results for “Traffic simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Verifying Autonomous Air Traffic Algorithms in the Presence of Sensor Error and Flight Perturbations

We offer a method to verify algorithms for air traffic control in the presence of sensor errors and flight perturbations. Since errors and perturbations are described by stochastic processes, verification by analytical methods is difficult. We turn to Monte Carlo simulation, but there are two major obstacles. Since air traffic algorithms are safety-critical, the algorithm must be established at a very high confidence level which requires an enormous number of trials. Another is that a simulation attempts to show that an algorithm correctly handles a hazard that might appear, but there is a lack of information about the frequency of occurrence of hazards in the airspace. This paper offers a solution to these and other obstacles. It recognizes there may be a number of algorithms that address different hazards, and the results of the different simulations must be combined to satisfy a global reliability requirement at a high confidence level. To demonstrate the feasibility of the approach, we apply it to an example, an initial effort in collision avoidance.

verification↗

A Review on Simulation Platforms for Agent-Based Modeling in Electrified Transportation

As the use of combustion engine vehicles plays a deciding role in global warming, we can observe a trend to replace them with electric vehicles (EV) driven by new environmentally conscious policies and increasing technological capabilities. With improvements in driving range and reduction in prices come new challenges that may hamper the progress towards complete battery driven transportation. A major challenge for the increasing EV adoption is the planning of extensions to existing infrastructure or the inclusion of new infrastructure components in the planning process. This demands increasingly complex planning tools that can simulate the interplay between different stakeholders in modern transportation scenarios such as EVs, charging stations, energy providers, and general transportation participants. Simulation platforms for agent-based modeling in transportation have been developed as effective interactive tools that allow planners to explore different trade-offs across different scenarios with the ability to simulate the impact of policy or infrastructure decisions on the different stakeholders in the simulation. This article surveys several of the major simulation platforms that include modern EV-based forms of transportation and allow the simulation of relevant infrastructure components alongside the well established transportation simulations. These tools allow researchers to analyze expected traffic flow, identify possible charging station locations based on area demand, predict electrical grid demand, and more. Here this survey intends to make it easier for researchers to identify and apply a simulation platform in the context of supporting the increasing electrification of the transportation sector, enabling more efficient simulation and planning capabilities in this domain.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Development and Validation of an Automated Simulation Capability in Support of Integrated Demand Management

Integrated Demand Management (IDM) is a near- to mid-term NASA concept that proposes to address mismatches in air traffic system demand and capacity by using strategic flow management capabilities to pre-condition demand into the more tactical Time-Based Flow Management System (TBFM). This paper describes an automated simulation capability to support IDM concept development. The capability closely mimics existing human-in-the-loop (HITL) capabilities, while automating both the human components and collaboration between operational systems, and speeding up the real-time aircraft simulations. Such a capability allows for parametric studies to be carried out that can inform the HITL simulations, identifying breaking points and parameter values at which significant changes in system behavior occur. The paper describes the initial validation of the automated simulation capability against results from previous IDM HITL experiments, quantifying the differences. The simulator is then used to explore the performance of the IDM concept under the simple scenario of a capacity constrained airport under a wide range of wind conditions.

Traffic Flow Management↗

Modeling the Environmental Impact of Air Traffic Operations

There is increased interest to understand and mitigate the impacts of air traffic on the climate, since greenhouse gases, nitrogen oxides, and contrails generated by air traffic can have adverse impacts on the climate. The models described in this presentation are useful for quantifying these impacts and for studying alternative environmentally aware operational concepts. These models have been developed by leveraging and building upon existing simulation and optimization techniques developed for the design of efficient traffic flow management strategies. Specific enhancements to the existing simulation and optimization techniques include new models that simulate aircraft fuel flow, emissions and contrails. To ensure that these new models are beneficial to the larger climate research community, the outputs of these new models are compatible with existing global climate modeling tools like the FAA's Aviation Environmental Design Tool.

Chen, Neil↗

Civil Tiltrotor Feasibility Study for the New York and Washington Terminal Areas

NASA tasked LMI to assess the potential contributions of a yet-undeveloped Civil Tiltrotor aircraft (CTR) in improving capacity in the National Airspace System in all weather conditions. The CTRs studied have assumed operating parameters beyond current CTR capabilities. LMI analyzed CTRs three ways: in fast-time terminal area modeling simulations of New York and Washington to determine delay and throughput impacts; in the Integrated Noise Model, to determine local environmental impact; and with an economic model, to determine the price viability of a CTR. The fast-time models encompassed a 250 nmi range and included traffic interactions from local airports. Both the fast-time simulation and the noise model assessed impacts from traffic levels projected for 1999, 2007, and 2017. Results: CTRs can reduce terminal area delays due to concrete congestion in all time frames. The maximum effect, the ratio of CTRs to jets and turboprop aircraft at a subject airport should be optimized. The economic model considered US traffic only and forecasted CTR sales beginning in 2010.

Stouffer, Virginia↗

Development and Demonstration of a Prototype Free Flight Cockpit Display of Traffic Information

Two versions of a prototype Free Flight cockpit situational display (Basic and Enhanced) were examined in a simulation at the NASA Ames Research Center. Both displays presented a display of traffic out to a range of 120 NM, and an alert when the automation detected a substantial danger of losing separation with another aircraft. The task for the crews was to detect and resolve threats to separation posed by intruder aircraft. An Enhanced version of the display was also examined. It incorporated two additional conflict alerting levels and tools to aid in trajectory prediction and path planning. Ten crews from a major airline participated in the study. Performance analyses and pilot debriefings showed that the Enhanced display was preferred, and that minimal separation between the intruder and the ownship was larger with the Enhanced display. In addition, the additional information on the Enhanced display did not lead crews to engage in more maneuvering. Instead an opposite trend was indicated. Finally, crews using the Enhanced display responded more proactively, tending to resolve alerts earlier.

Johnson, Walter W.↗

Air Traffic Controllers' Control Strategies in the Terminal Area Under Off-Nominal Conditions

A human-in-the-loop simulation investigated the robustness of a schedule-based terminal-area air traffic management concept, and its supporting controller tools, to off-nominal events - events that led to situations in which runway arrival schedules required adjustments and controllers could no longer use speed control alone to impose the necessary delays. The main research question was exploratory: to assess whether controllers could safely resolve and control the traffic during off-nominal events. A focus was the role of the supervisor - how he managed the schedules, how he assisted the controllers, what strategies he used, and which combinations of tools he used. Observations and questionnaire responses revealed supervisor strategies for resolving events followed a similar pattern: a standard approach specific to each type of event often resolved to a smooth conclusion. However, due to the range of factors influencing the event (e.g., environmental conditions, aircraft density on the schedule, etc.), sometimes the plan required revision and actions had a wide-ranging effect.

Martin, Lynne↗

Work Practice Simulation of Complex Human-Automation Systems in Safety Critical Situations: The Brahms Generalized berlingen Model

The transition from the current air traffic system to the next generation air traffic system will require the introduction of new automated systems, including transferring some functions from air traffic controllers to on­-board automation. This report describes a new design verification and validation (V&V) methodology for assessing aviation safety. The approach involves a detailed computer simulation of work practices that includes people interacting with flight-critical systems. The research is part of an effort to develop new modeling and verification methodologies that can assess the safety of flight-critical systems, system configurations, and operational concepts. The 2002 Ueberlingen mid-air collision was chosen for analysis and modeling because one of the main causes of the accident was one crew's response to a conflict between the instructions of the air traffic controller and the instructions of TCAS, an automated Traffic Alert and Collision Avoidance System on-board warning system. It thus furnishes an example of the problem of authority versus autonomy. It provides a starting point for exploring authority/autonomy conflict in the larger system of organization, tools, and practices in which the participants' moment-by-moment actions take place. We have developed a general air traffic system model (not a specific simulation of Überlingen events), called the Brahms Generalized Ueberlingen Model (Brahms-GUeM). Brahms is a multi-agent simulation system that models people, tools, facilities/vehicles, and geography to simulate the current air transportation system as a collection of distributed, interactive subsystems (e.g., airports, air-traffic control towers and personnel, aircraft, automated flight systems and air-traffic tools, instruments, crew). Brahms-GUeM can be configured in different ways, called scenarios, such that anomalous events that contributed to the Überlingen accident can be modeled as functioning according to requirements or in an anomalous condition, as occurred during the accident. Brahms-GUeM thus implicitly defines a class of scenarios, which include as an instance what occurred at Überlingen. Brahms-GUeM is a modeling framework enabling "what if" analysis of alternative work system configurations and thus facilitating design of alternative operations concepts. It enables subsequent adaption (reusing simulation components) for modeling and simulating NextGen scenarios. This project demonstrates that BRAHMS provides the capacity to model the complexity of air transportation systems, going beyond idealized and simple flights to include for example the interaction of pilots and ATCOs. The research shows clearly that verification and validation must include the entire work system, on the one hand to check that mechanisms exist to handle failures of communication and alerting subsystems and/or failures of people to notice, comprehend, or communicate problematic (unsafe) situations; but also to understand how people must use their own judgment in relating fallible systems like TCAS to other sources of information and thus to evaluate how the unreliability of automation affects system safety. The simulation shows in particular that distributed agents (people and automated systems) acting without knowledge of each others' actions can create a complex, dynamic system whose interactive behavior is unexpected and is changing too quickly to comprehend and control.

complex systems↗

SpaceWire model development technology for satellite architecture.

Packet switched data communications networks that use distributed processing architectures have the potential to simplify the design and development of new, increasingly more sophisticated satellite payloads. In addition, the use of reconfigurable logic may reduce the amount of redundant hardware required in space-based applications without sacrificing reliability. These concepts were studied using software modeling and simulation, and the results are presented in this report. Models of the commercially available, packet switched data interconnect SpaceWire protocol were developed and used to create network simulations of data networks containing reconfigurable logic with traffic flows for timing system distribution.

33 ADVANCED PROPULSION SYSTEMS↗

Improved computer simulation of the TCAS 3 circular array mounted on an aircraft

The Traffic advisory and Collision Avoidance System (TCAS) is being developed by the Federal Aviation Administration (FAA) to assist aircraft pilots in mid-air collision avoidance. This report concentrates on the computer simulation of the enchanced TCAS 2 systems mounted on a Boeing 727. First, the moment method is used to obtain an accurate model for the enhanced TCAS 2 antenna array. Then, the OSU Aircraft Code is used to generate theoretical radiation patterns of this model mounted on a simulated Boeing 727 model. Scattering error curves obtained from these patterns can be used to evaluate the performance of this system in determining the angular position of another aircraft with respect to the TCAS-equipped aircraft. Finally, the tracking of another aircraft is simulated when the TCAS-equipped aircraft follows a prescribed escape curve. In short, the computer models developed in this report have generality, completeness and yield reasonable results.

Rojas, R. G.↗

Methods to Reduce Communication Workload for UAM Operations

Implementation of Urban Air Mobility (UAM) operations, or air passenger transportation systems within densely populated metropolitan areas, seeks to mitigate increasing traffic congestion. However, the development and integration of UAM operations into the national airspace system comes with its own unique challenges, such as vehicle requirements, flight planning and scheduling, and coordination between UAM flights and air traffic controllers. In particular, verbal coordination will play an integral part in the determined success of UAM operations and its ability to meet projected high consumer demands. In order to meet demands and higher traffic volumes on UAM routes, verbal communication between the UAM pilot and controller must be streamlined to reduce the controller's workload while helping to maintain safety within a given airspace. One method of reducing verbal workload are Letters Of Agreement (LOAs) that outline responsibilities and procedures for operations in an airspace. These LOAs will specify the operations, procedures, and routes for UAM flights. The proposed study will examine the usability of two route formatting styles for LOAs; (i) Verbal route descriptions and (ii) Tower En Route Control (TECs) routes. Verbal route descriptions will include the route name and associated visual cues on the route. The TEC route versions will include relevant waypoints and charts outlining the route with waypoints marked. The study will be part of a UAM X1 human in the loop (HITL) simulation. Controller participants will handle traditional air traffic including moderate levels of UAM traffic on current and modified helicopter routes within the Dallas Fort-Worth area. Scenarios will be counterbalanced and repeated to test both route formatting versions. After each trial, participants will rate the usability of the LOA used in the previous trial via a subjective questionnaire. We expect that controllers will prefer the LOA with TEC routes due to simplicity and visual elements available.

aerospace human factors↗

Concurrent simulation of a parallel jaw end effector

A system of programs developed to aid in the design and development of the command/response protocol between a parallel jaw end effector and the strategic planner program controlling it are presented. The system executes concurrently with the LISP controlling program to generate a graphical image of the end effector that moves in approximately real time in response to commands sent from the controlling program. Concurrent execution of the simulation program is useful for revealing flaws in the communication command structure arising from the asynchronous nature of the message traffic between the end effector and the strategic planner. Software simulation helps to minimize the number of hardware changes necessary to the microprocessor driving the end effector because of changes in the communication protocol. The simulation of other actuator devices can be easily incorporated into the system of programs by using the underlying support that was developed for the concurrent execution of the simulation process and the communication between it and the controlling program.

Bynum, Bill↗

Modeling and Control of Airport Queueing Dynamics under Severe Flow Restrictions

Based on field observations and interviews with controllers at BOS and EWR, we identify the closure of local departure fixes as the most severe class of airport departure restrictions. A set of simple queueing dynamics and traffic rules are developed to model departure traffic under such restrictions. The validity of the proposed model is tested via Monte Carlo simulation against 10 hours of actual operations data collected during a case-study at EWR on June 29,2000. In general, the model successfully reproduces the aggregate departure congestion. An analysis of the average error over 40 simulation runs indicates that flow-rate restrictions also significantly impact departure traffic; work is underway to capture these effects. Several applications and what-if scenarios are discussed for future evaluation using the calibrated model.

Carr, Francis↗

Multi-Commodity Traffic Signal Control and Routing With Connected Vehicles

We report a real-time traffic management policy that integrates traffic signal control and multi-commodity routing of connected vehicles in networks with multiple destinations is developed. The proposed policy is based on a multi-commodity formulation of the store-and-forward model and assumes all vehicles are able to exchange information with the infrastructure. Vehicles share information about their current location and final destination. Based on this information, the strategy determines both optimized signal timings at every intersection and vehicle-specific routing information at every link of the network. The control actions, i.e., signal times and routing information, are updated at every cycle and delivered by a finite horizon optimal control problem cast into a rolling horizon framework. The underlying optimization problem is convex, and thus the method is suitable for real-time operation in large networks. The method is validated via a micro-simulation study in networks with up to twenty intersections and, in all simulations, outperforms a real-time traffic-responsive signal control strategy that is based on a single-commodity store-and-forward model. The scalable computation effort for increasing network sizes and prediction horizon confirms the computational efficiency of the method.

42 ENGINEERING↗

A Human-In-The-Loop Simulation for Urban Air Mobility in the Terminal Area

In this paper researchers propose a human-in-the-loop experiment to study human performance when tasked with tactical deconfliction in terminal area air taxi operations. The air taxi operations being considered herein are an advanced air transportation concept called Urban Air Mobility (UAM). The UAM concept aims to support not only air taxi operations, but also package delivery and emergency response among other use cases. The key innovation over current air transportation lies with the introduction of highly automated aircraft and air traffic management systems. Development of the UAM system will include transitional midterm phases where some operational services will be provided by a mixture of automation and human actors. Midterm operations present a unique challenge, since the scope of responsibility of automated systems is largely undefined, suggesting the need for direct human participation with little to inform how much human intervention is necessary. Here it is assumed that traffic management responsibilities require coordination between human actors and automated systems and focus on arrival flows for midterm operations. In the proposed human-in-the-loop simulation, virtual UAM traffic is strategically deconflicted by a Provider of Services for UAM at departure, then tactically managed by a human at the arrival facility. Generated traffic consists of UAM participants flying in UAM exclusive airspace structures, thus isolated from traditional traffic. The human operator is tasked with managing spacing of arrival traffic and executing speed adjustments as deemed necessary. Researchers propose the investigation of three levels of automation assistance: 1) no assistance; 2) spacing violation detection; 3) spacing violation detection and speed adjustment recommendations. Quantitative measures like throughput and delay are used to assess the human's capacity for accommodating airborne delays. Qualitative evaluations such as surveys and open-ended feedback are used to gain insight into human factors. These factors could introduce additional capacity constraints on traffic, independent of physical or technical constraints. Although findings for this study will not be reported as the study has not yet been executed, the authors conclude with potential outcomes informed by previous simulations in the literature and suggestions for the structure and procedures of midterm human-automation air traffic management.

UAM↗

A Human-In-The-Loop Simulation for Urban Air Mobility in the Terminal Area

In this presentation we propose a human-in-the-loop experiment to study the potential impact of human engagement in tactical mitigation of delay in terminal area air taxi operations. The air taxi operations being considered herein is an advanced air transportation concept called Urban Air Mobility (UAM). The UAM concept aims to support not only air taxi operations, but also package delivery and emergency response among other use cases. The key innovation over current air transportation lies with the introduction of autonomous aircraft and autonomous air traffic management systems. Development of the UAM system will include transitional midterm phases where some operational services will be provided by a mixture of automation and human actors. Midterm operations present a unique challenge, since the scope of responsibility of automated systems is largely undefined, suggesting the need for direct human participation with little to inform how much human intervention is necessary. Here we assume that traffic management responsibilities require coordination between human actors and automated systems and focus on arrival flows for midterm operations. In the proposed human-in-the-loop simulation, virtual UAM traffic is strategically deconflicted by a Provider of Services for UAM at departure, then tactically managed by a human at the arrival facility. Generated traffic consists of UAM participants flying in UAM exclusive airspace structures, thus isolated from traditional traffic. The human operator is tasked with managing spacing of arrival traffic and executing speed adjustments as deemed necessary. We propose the investigation of three levels of automation assistance: 1) no assistance; 2) spacing violation detection; 3) spacing violation detection and speed adjustment recommendations. Quantitative measures like throughput and delay are used to assess the human's capacity for accommodating airborne delays. Qualitative evaluations such as surveys and open-ended feedback are used to gain insight into human factors. These factors could introduce additional capacity constraints on traffic, independent of physical or technical constraints. Although findings for this study will not be reported as the study has not yet been executed, we conclude with potential outcomes informed by previous simulations in the literature and suggestions for the structure and procedures of midterm human-automation air traffic management.

UAM↗

Validation of an Automated System for Arrival Traffic Management

The fuel-efficiencies of arrival flights that were managed by an automated system were compared to the fuel-efficiencies of arrival flights that were managed by air traffic controllers. It was infeasible to have the automated system control arrivals in real operations, so the comparison was accomplished by setting up a fast-time simulation where the automated system could manage arrivals with the same initial conditions and flight plans as those that operated in real operations during a selected comparison period and in the same background traffic. For this study, Newark Liberty International Airport was selected as the arrival airport because its high traffic load and constrained arrival procedures were expected to highlight fuel-efficiency benefits of an automated system. In the simulation, the automated system managed Newark arrivals, and the other flights (arrivals to other airports, departures, and overflights) composed the background traffic. To match the simulation and the real operations background traffic, the other flights flew in simulation the same trajectory that they flew in real operations during the comparison period. Fuel-efficiency was measured by calculating fuel burns of the arrival trajectories. The fuel-efficiencies of arrival trajectories produced in the simulation were compared with the estimated fuel-efficiencies of arrival trajectories recorded from real operations during the comparison period. Results showed that automation managed arrivals burned 346 lbs less fuel per flight on average than controller managed arrivals.

air traffic control↗

Validation of an Automated System for Arrival Traffic Management

The fuel-efficiencies of arrival flights that were managed by an automated system were compared to the fuel-efficiencies of arrival flights that were managed by air traffic controllers. It was infeasible to have the automated system control arrivals in real operations, so the comparison was accomplished by setting up a fast-time simulation where the automated system could manage arrivals with the same initial conditions and flight plans as those that operated in real operations during a selected comparison period and in the same background traffic. For this study, Newark Liberty International Airport was selected as the arrival airport because its high traffic load and constrained arrival procedures were expected to highlight fuel-efficiency benefits of an automated system. In the simulation, the automated system managed Newark arrivals, and the other flights (arrivals to other airports, departures, and overflights) composed the background traffic. To match the simulation and the real operations background traffic, the other flights flew in simulation the same trajectory that they flew in real operations during the comparison period. Fuel-efficiency was measured by calculating fuel burns of the arrival trajectories. The fuel-efficiencies of arrival trajectories produced in the simulation were compared with the estimated fuel-efficiencies of arrival trajectories recorded from real operations during the comparison period. Results showed that automation managed arrivals burned 346 lbs less fuel per flight on average than controller managed arrivals.

air traffic control↗