Search NASA⌕ Search

SEARCH · Search NASA

Results for “VAPOR PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

InAs QDs in a metamorphic In{sub 0.25}Ga{sub 0.75}As matrix, grown by MOCVD

InAs quantum dots (QDs) in a metamorphic InGaAs matrix are grown by MOVPE (metal-organic vapor-phase epitaxy) on GaAs substrates. The QDs emit light in the range 1380–1400 nm at room temperature. A multilayer metamorphic buffer (MB) consisting of nine sublayers, each having a thickness of ~200 nm, is used to grow the structures. In each of the first seven sublayers, the indium content x successively increases by ~3.5% to reach a final value of 24.5%. Then a compensating sublayer with x = 28% and a final dislocation-free sublayer with x = 24.5% are grown. It is shown that the elastic strain relaxes with dislocation bending at both interfaces in the third, from the surface, sublayer, with the top layer being free of dislocations at both interfaces. The QDs are formed in the metamorphic matrix by the deposition of 2–2.5 InAs single layers at 520°C, with the subsequent overgrowth of a thin InGaAs layer (cap layer) at the same temperature. It is found that, to improve the optical and structural quality of the samples, it is necessary to raise the growth rate and reduce the concentration of indium in the cap layer with respect to the corresponding growth parameters of the last layer of the metamorphic buffer.

36 MATERIALS SCIENCE↗

High-power InAs/InAsSbP heterostructure leds for methane spectroscopy ({lambda} {approx} 3.3 {mu}m)

Two designs of light-emitting diodes (LEDs) based on InAsSbP/InAs/InAsSbP double hetero-structures grown by metal-organic vapor phase epitaxy on p- and n-InAs substrates have been studied. The current-voltage and electroluminescence characteristics of the LEDs are analyzed. It is shown that the LED design with a light-emitting crystal (chip) mounted with the epitaxial layer down on the LED case and emission extracted through the n-InAs substrate provides better heat removal. As a result, the spectral characteristics remain stable at increased injection currents and the quantum efficiency of radiative recombination is higher. The internal quantum efficiency of light-em itting structures with an emission wavelength {lambda} = 3.3-3.4 {mu}m is as high as 22.3%. The optical emission power of the LEDs is 140 {mu}W at a current of 1 A in the quasi-continuous mode and reaches a value of 5.5 mW at a current of 9 A in the pulsed mode.

36 MATERIALS SCIENCE↗

High 400 °C operation temperature blue spectrum concentration solar junction in GaInN/GaN

Transparent wide gap junctions suitable as high temperature, high flux topping cells have been achieved in GaInN/GaN by metal-organic vapor phase epitaxy. In structures of 25 quantum wells (QWs) under AM1.5G illumination, an open circuit voltage of 2.1 V is achieved. Of the photons absorbed in the limited spectral range of <450 nm, 64.2% are converted to electrons collected at the contacts under zero bias. At a fill factor of 45%, they account for a power conversion efficiency of38.6%. Under concentration, the maximum output power density per sun increases from 0.49 mW/cm{sup 2} to 0.51 mW/cm{sup 2} at 40 suns and then falls 0.42 mW/cm{sup 2} at 150 suns. Under external heating, a maximum of 0.59 mW/cm{sup 2} is reached at 250 °C. Even at 400 °C, the device is fully operational and exceeds room temperature performance. A defect analysis suggests that significantly higher fill factors and extension into longer wavelength ranges are possible with further development. The results prove GaInN/GaN QW solar junctions a viable and rugged topping cell for concentrator photovoltaics with minimal cooling requirements. By capturing the short range spectrum, they reduce the thermal load to any conventional cells stacked behind.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectroscopic analysis of the NIR emission in Tm implanted Al{sub x}Ga{sub 1-x}N layers

Al{sub x}Ga{sub 1-x}N samples, with different AlN molar fractions, x = 0, 0.15, 0.77, and 1, grown by halide vapor phase epitaxy were implanted with Tm ions. Photoluminescence (PL) measurements revealed that after thermal annealing all the samples exhibit intraionic Tm{sup 3+} luminescence. In samples with x > 0, the low temperature emission is dominated by the lines that appear in the near infrared (NIR) spectral region, corresponding to the overlapped {sup 1}G{sub 4} → {sup 3}H{sub 5} and {sup 3}H{sub 4} → {sup 3}H{sub 6} multiplet transitions. A detailed spectroscopic analysis of NIR emission of the thulium implanted and annealed Al{sub x}Ga{sub 1-x}N layers is presented by using temperature dependent steady-state PL, room temperature PL excitation, and time resolved PL. The results indicate that the excitonic features sensitive to the alloy disorder are involved in the excitation population processes of the Tm{sup 3+} luminescence and the highest thermal stability for the NIR emission occurs for the AlN:Tm sample.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stress engineering in GaN structures grown on Si(111) substrates by SiN masking layer application

GaN layers without and with an in-situ SiN mask were grown by using metal organic vapor phase epitaxy for three different approaches used in GaN on silicon(111) growth, and the physical and optical properties of the GaN layers were studied. For each approach applied, GaN layers of 1.4 μm total thickness were grown, using silan SiH{sub 4} as Si source in order to grow Si{sub x}N{sub x} masking layer. The optical micrographs, scanning electron microscope images, and atomic force microscope images of the grown samples revealed cracks for samples without SiN mask, and micropits, which were characteristic for the samples grown with SiN mask. In situ reflectance signal traces were studied showing a decrease of layer coalescence time and higher degree of 3D growth mode for samples with SiN masking layer. Stress measurements were conducted by two methods—by recording micro-Raman spectra and ex-situ curvature radius measurement—additionally PLs spectra were obtained revealing blueshift of PL peak positions with increasing stress. The authors have shown that a SiN mask significantly improves physical and optical properties of GaN multilayer systems reducing stress in comparison to samples grown applying the same approaches but without SiN masking layer.

42 ENGINEERING↗

Study of the pulse characteristics of semiconductor lasers with a broadened waveguide at low temperatures (110–120 K)

Pulse-pumped MOVPE-fabricated (metal-organic vapor-phase epitaxy) semiconductor lasers emitting in the spectral ranges 1000–1100 and 1400–1600 nm at temperatures of 110–120 K are studied. It is found that cooling the lasers for both spectral ranges to low temperature results in their light–current curves approaching linearity, and an optical power of, respectively, 110 and 20 W can be attained. The low-temperature effect is reduced for lasers emitting in the spectral range 1400–1600 nm. The processes affecting a rise in the internal optical loss in semiconductor lasers are considered. It is shown that an increase in the carrier concentration in the waveguide of a laser structure greatly depends on temperature and is determined by the noninstantaneous capture (capture rate) of carriers from the waveguide into the active region. It is demonstrated that, upon lowering the temperature to 115K, the concentration of electrons and holes in the waveguide becomes lower, which leads to a significant decrease in the internal optical loss and to an increase in the output optical power of the semiconductor laser.

36 MATERIALS SCIENCE↗

An InP/Si heterojunction photodiode fabricated by self-aligned corrugated epitaxial lateral overgrowth

An n-InP/p-Si heterojunction photodiode fabricated by corrugated epitaxial lateral overgrowth (CELOG) method is presented. N-InP/p-Si heterojunction has been achieved from a suitable pattern containing circular shaped openings in a triangular lattice on the InP seed layer on p-Si substrate and subsequent CELOG of completely coalesced n-InP. To avoid current path through the seed layer in the final photodiode, semi-insulating InP:Fe was grown with adequate thickness prior to n-InP growth in a low pressure hydride vapor phase epitaxy reactor. The n-InP/p-Si heterointerface was analyzed by scanning electron microscopy and Raman spectroscopy. Room temperature cross-sectional photoluminescence (PL) mapping illustrates the defect reduction effect in InP grown on Si by CELOG method. The InP PL intensity measured above the InP/Si heterojunction is comparable to that of InP grown on a native planar substrate indicating low interface defect density of CELOG InP despite of 8% lattice mismatch with Si. The processed n-InP/p-Si heterojunction photodiodes show diode characteristics from the current-voltage (I-V) measurements with a dark current density of 0.324 mA/cm{sup 2} at a reverse voltage of −1 V. Under the illumination of AM1.5 conditions, the InP/Si heterojunction photodiode exhibited photovoltaic effect with an open circuit voltage of 180 mV, a short circuit current density of 1.89 mA/cm{sup 2}, an external quantum efficiency of 4.3%, and an internal quantum efficiency of 6.4%. This demonstration of epitaxially grown InP/Si heterojunction photodiode will open the door for low cost and high efficiency solar cells and photonic integration of III-Vs on silicon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

(110)-Oriented GaAs Devices and Spalling as a Platform for Low-Cost III-V Photovoltaics

Here, we demonstrate the growth of GaAs solar cells by hydride vapor phase epitaxy (HVPE) on epi-ready and previously spalled (110) GaAs wafers as an advance towards a potentially low-cost (110)-based device platform. Controlled spalling offers a fracture-based path to substrate cost amortization, enabling device exfoliation and substrate reuse, but the faceted surface generated during the spalling of (100)-oriented GaAs presents hurdles to direct regrowth of subsequent devices. Spalling of (110) substrates instead eliminates faceting by aligning the substrate surface with the predominant crystal cleavage plane. III-V epitaxy of solar cells is significantly less developed on (110)-oriented substrates, however. Here, we develop (110)-based GaAs solar cells grown by HVPE on epi-ready substrates, demonstrating equal performance to devices grown on the more standard (100) orientation. We also characterize the surface of spalled, (110)-oriented substrates, revealing flat terraces separated by steps with sub-micron-scale height on average. Finally, we present an initial device grown on a previously spalled surface without additional surface re-preparation with nearly 16% efficiency under a simulated AM1.5G spectrum. Together, these results provide preliminary evidence of a potentially low-cost path to enable terrestrial III-V photovoltaics via the (110) substrate orientation.

14 SOLAR ENERGY↗

Inspection of next-generation EUV resists with nano-projectile secondary ion mass spectrometry

There is a rapidly growing need for new materials for extreme ultraviolet (EUV) lithography, which incorporate high EUV absorbing elements. Hybrid resists, which are a combination of inorganic and organic moieties, are promising as they offer both high EUV sensitivity and high etch resistance. However, there is a glaring lack of methods to examine the uniformity of these important materials at the nanoscale. We examine the capabilities of nano-projectile secondary ion mass spectrometry (NP-SIMS) to investigate hybrid resists. NP-SIMS is a mass spectrometry-based technique with high lateral resolution. Using NP-SIMS, a surface is probed stochastically with a suite of individual projectiles, 10 6 to 10 7 in total, separated in time and space. Examining these individual mass spectra allows for nanoscale investigation of the uniformity of the surface. We evaluated the performance of NP-SIMS using samples of poly(methyl methacrylate) (PMMA) infiltrated with varying amounts of InO x via vapor-phase infiltration (VPI), an organic–inorganic hybridization method derived from atomic layer deposition. Here, we found that NP-SIMS measurements contained abundant characteristic ions related to both the PMMA and infiltrated In. The intensity of In atomic ions increased linearly with the number of infiltration cycles; however, the uniformity of In and PMMA varied with the number of infiltration cycles. After one cycle, we found that both the PMMA and In were relatively inhomogeneous. The homogeneity improved with subsequent infiltration cycles. In addition, NP-SIMS measurements contained characteristic ions related to the infiltration reaction and provided insights into the VPI mechanism. Overall, the results show that NP-SIMS is capable of examining both the inorganic and organic moieties in a hybrid resist and will be an important method for understanding the performance of these materials for use in EUV lithography.

36 MATERIALS SCIENCE↗

Analysis of Crystalline Defects Caused by Growth on Partially Planarized Spalled (100) GaAs Substrates

We analyze the effect of growth on non-(100) surfaces resulting from incomplete planarization of spalled GaAs wafers on the defect structure of GaAs solar cell layers grown by hydride vapor phase epitaxy (HVPE). Controlled spalling of (100)-oriented GaAs has the potential to reduce substrate costs for III-V epitaxy; however, it creates regularly faceted surfaces that may complicate the growth of high-quality III-V optoelectronic devices. We leverage the anisotropic growth rate of HVPE to planarize these faceted GaAs substrates, reducing the surface roughness and degree of faceting. We observe degraded solar cell performance and material quality in sample areas where facets are not completely removed. We used dark lock-in thermography and photoluminescence to identify recombination in areas that were not fully planarized. We used cathodoluminescence to identify the presence of extended defects in these regions, which are correlated with bandgap fluctuations in the material. We hypothesize that these defects were created by strain from compositional fluctuations in ternary alloys grown on the faceted surfaces. This work elucidates the potential issues of solar cells grown on faceted surfaces and builds understanding toward realizing high performance III-V photovoltaics with the cost-reduction potential of controlled spalling.

14 SOLAR ENERGY↗

Pulsed semiconductor lasers with higher optical strength of cavity output mirrors

Asymmetric heterostructures with an ultrathick waveguide based on an AlGaAs/GaAs alloy system that allow lasing at a wavelength of 905 nm have been developed and fabricated by hydride metalorganic vapor-phase epitaxy. The internal optical loss and internal quantum efficiency of semiconductor lasers based on such structures were 0.7 cm{sup -1} and 97%, respectively. It is shown that the highest output optical power of laser diodes with antireflecting (SiO{sub 2}) and reflecting (Si/SiO{sub 2}) coatings deposited on untreated Fabry-Perot cavity facets obtained by cleaving in an oxygen atmosphere reached 67 W in the pulsed mode and is limited by mirror damage. Treatment of Fabry-Perot cavity facets by etching in argon plasma and the formation of coatings with passivating and oxygen-blocking GaN and Si{sub 3}N{sub 4} layers allowed an increase in the maximum output optical power to 120 W. Mirror damage was not observed at the attained output optical power.

36 MATERIALS SCIENCE↗

Light polarization characteristics of m-plane Al{sub x}Ga{sub 1-x}N films suffering from in-plane anisotropic tensile stresses

Polarization characteristics of the near-band-edge optical transitions in m-plane Al{sub x}Ga{sub 1-x}N epilayers suffering from anisotropic stresses were quantified. The epilayers were grown by both ammonia-source molecular beam epitaxy and metalorganic vapor phase epitaxy methods on an m-plane freestanding GaN substrate. The light polarization direction altered from E perpendicular c to E || c at the AlN molar fraction, x, between 0.25 and 0.32, where E is the electric field component of the light and perpendicular and || represent perpendicular and parallel, respectively. To give a quantitative explanation for the result, energies and oscillator strengths of the exciton transitions involving three separate valence bands were calculated as functions of strains using the Bir-Pikus Hamiltonian. The calculation predicted that the lowest energy transition (E{sub 1}) is polarized to the m-axis normal to the surface (X{sub 3}) for 0<x{<=}1, meaning that E{sub 1} emission is principally undetectable from the surface normal for any in-plane tensile strained Al{sub x}Ga{sub 1-x}N. The polarization direction of observable surface emission was predicted to alter from c-axis normal (X{sub 1}) to c-axis parallel (X{sub 2}) for the middle energy transition (E{sub 2}) and X{sub 2} to X{sub 1} for the highest energy transition (E{sub 3}) between x=0.25 and 0.32. The experimental results were consistently reproduced by the calculation.

36 MATERIALS SCIENCE↗

Selective Epitaxial Growth of III–N Structures Using Ion-Beam Nanolithography

The selective epitaxial growth of GaN by metalorganic vapor-phase epitaxy combined with ion-beam etching is investigated. To this end, partially masked GaN epitaxial layers are fabricated by depositing a thin Si{sub 3}N{sub 4} layer onto the surface in a single technological process with the growth of GaN and the subsequent opening of windows of different shapes in this layer by an ion beam. Selective epitaxial growth regimes are studied. It is shown that, in a situation where the total area of the windows in the mask is small relative to the total area of the sample, the required epitaxy duration should be 5–10 s, which impairs the reproducibility of the parameters of the epitaxial process. It is also shown that the mechanism of the selective growth of submicrometer objects differs significantly from that for planar layers and selectively grown layers with dimensions of ~1 μm or greater. The effect of precursor (trimethylgallium and ammonia) fluxes on the character of selective epitaxy is examined. To investigate the possibilities of varying mask topology for fabricating model objects with regard to photonic crystals, the impact of the shape and orientation of the windows in the Si{sub 3}N{sub 4} mask on the character of selective epitaxy is studied.

36 MATERIALS SCIENCE↗

Preparation and atomic structure of reconstructed (0001) InGaN surfaces

The preparation and surface structure of high quality group-III-polar (0001) InGaN layers grown by metal-organic vapor phase epitaxy have been investigated. In order to obtain a clean and well-ordered surface we studied the preparation by annealing at various temperatures under ultra high vacuum and nitrogen-rich conditions in nitrogen-plasma. We show that different InGaN surface reconstructions such as (1 Multiplication-Sign 1), (1 + 1/6), (2 Multiplication-Sign 2), and ({radical}(3) Multiplication-Sign {radical}(3))R30 Degree-Sign can be obtained as observed by low energy electron diffraction. Dependent on the annealing temperature and nitrogen supply these surfaces exhibit significant differences in stoichiometry and morphology as determined by Auger electron spectroscopy and atomic force microscopy measurements. The (1 Multiplication-Sign 1), (2 Multiplication-Sign 2), and ({radical}(3) Multiplication-Sign {radical}(3))R30 Degree-Sign superstructures are terminated by single group-III-adatoms, whereas the (1 + 1/6) exhibits a incommensurate overlayer of group-III-atoms. We show that the (2 Multiplication-Sign 2) and ({radical}(3) Multiplication-Sign {radical}(3))R30 Degree-Sign an In depletion in the first group-III layer and In or Ga adatoms in ontop position. Strain-relaxation is suggested to explain this structure formation.

36 MATERIALS SCIENCE↗

X-ray diffraction study of short-period AlN/GaN superlattices

The structure of short-period hexagonal GaN/AlN superlattices (SLs) has been investigated by X-ray diffraction. The samples have been grown by metalorganic vapor-phase epitaxy (MOVPE) in a horizontal reactor at a temperature of 1050°C on (0001)Al{sub 2}O{sub 3} substrates using GaN and AlN buffer layers. The SL period changes from 2 to 6 nm, and the thickness of the structure varies in a range from 0.3 to 1 μm. The complex of X-ray diffraction techniques includes a measurement of θ-2θ rocking curves of symmetric Bragg reflection, the construction of intensity maps for asymmetric reflections, a measurement and analysis of peak broadenings in different diffraction geometries, a precise measurement of lattice parameters, and the determination of radii of curvature. The thickness and strain of separate SL layers are determined by measuring the θ-2θ rocking curves subsequent simulation. It is shown that most SL samples are completely relaxed as a whole. At the same time, relaxation is absent between sublayers, which is why strains in the AlN and GaN sublayers (on the order of 1.2 × 10{sup −2}) have different signs. An analysis of diffraction peak half-widths allows us to determine the densities of individual sets of dislocations and observe their change from buffer layers to SLs.

36 MATERIALS SCIENCE↗

Achieving ultrahigh modulus of resilience and enhanced thermal stability in ZnO x /SU-8 interpenetrating network polymer nanocomposite nanopillars

The modulus of resilience, a mechanical property that quantifies the maximum strain energy density a material can store during elastic deformation, is a crucial parameter for materials used in flexible displays, micro/nano-electro-mechanical system (M/NEMS) actuators, and ultra-sensitive pressure sensors. In this study, ZnO x /SU-8 nanocomposite nanopillars with a diameter of 300 nm, fully infiltrated with a uniformly distributed, interpenetrating amorphous ZnO x filler network, were synthesized via vapor-phase infiltration (VPI). In-situ uniaxial nano-compression tests revealed that the modulus of resilience of ZnO x /SU-8 reaches ∼ 12 MJ/m 3 , which is an ultrahigh value among all engineering materials with comparable strength. In addition, the synthesis fidelity, inorganic infiltration depth, and mechanical performance were all significantly improved compared to VPI-synthesized AlO x nanocomposites. Thermal stability, another key requirement for M/NEMS device materials operating under extreme environments, was also notably enhanced. Furthermore, partial crystallization of the amorphous ZnO x fillers during annealing contributed to an additional increase in modulus of resilience, reaching up to ∼ 13.9 MJ/m 3 . This work presents an effective fabrication strategy for producing nanostructured organic–inorganic hybrid nanocomposites with ultrahigh modulus of resilience and superior thermal stability, paving the way for their integration into next-generation flexible displays and high-performance M/NEMS devices working under harsh environments.

36 MATERIALS SCIENCE↗

Polyethylene upcycling to fuels: Narrowing the carbon number distribution in n-alkanes by tandem hydropyrolysis/hydrocracking

The extensive use of plastics in modern life has resulted in a global waste crisis to the environment. Polyethylene (PE) is one of the most popular and hardest plastics to recycle because of its strong C(sp 3 )-C(sp 3 ) bonds. In this study, a tandem conversion process, i.e., hydropyrolysis and subsequent vapor-phase hydrocracking of primary intermediates (C n>5 alkenes and long-chain alkanes), was conducted via a two-step pressurized flow-through fixed-bed reactor over a CoAl 2 O 4 spinel-derived catalyst. The product distribution could be flexibly tuned by regulating operating parameters in the cascade fixed-bed reactor and Co/Al molar ratio in CoAl 2 O 4 spinel catalysts. Under optimal reaction conditions (0.2 MPa H 2 , 550 °C for hydropyrolysis in the 1st reactor, 300–325 °C for hydrocracking in the 2nd reactor, 20 s -1 of gas hourly space velocity), the maximum single-pass yields of gasoline (C 5 -C 12 ) and jet-fuel (C 8 -C 16 ) range n-alkanes reached 86.0 wt% and 68.1 wt%, respectively. The CoAl 2 O 4 spinel catalysts also gained high activity in degrading realistic post-consumer plastics such as linear low-, low-, and high-density PE, and a ~ 73.1 wt% gasoline yield and a ~ 54.7 wt% C 8 -C 16 yield were retained even after 3 cycles in-situ regeneration of deactivated CoAl 2 O 4 catalysts. This work provides an efficient and tunable approach to upcycle PE wastes into liquid fuels with an ideal carbon length.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multicharacterization approach for studying InAl(Ga)N/Al(Ga)N/GaN heterostructures for high electron mobility transistors

We report on our multi–pronged approach to understand the structural and electrical properties of an InAl(Ga)N(33nm barrier)/Al(Ga)N(1nm interlayer)/GaN(3μm)/ AlN(100nm)/Al{sub 2}O{sub 3} high electron mobility transistor (HEMT) heterostructure grown by metal organic vapor phase epitaxy (MOVPE). In particular we reveal and discuss the role of unintentional Ga incorporation in the barrier and also in the interlayer. The observation of unintentional Ga incorporation by using energy dispersive X–ray spectroscopy analysis in a scanning transmission electron microscope is supported with results obtained for samples with a range of AlN interlayer thicknesses grown under both the showerhead as well as the horizontal type MOVPE reactors. Poisson–Schrödinger simulations show that for high Ga incorporation in the Al(Ga)N interlayer, an additional triangular well with very small depth may be exhibited in parallel to the main 2–DEG channel. The presence of this additional channel may cause parasitic conduction and severe issues in device characteristics and processing. Producing a HEMT structure with InAlGaN as the barrier and AlGaN as the interlayer with appropriate alloy composition may be a possible route to optimization, as it might be difficult to avoid Ga incorporation while continuously depositing the layers using the MOVPE growth method. Our present work shows the necessity of a multicharacterization approach to correlate structural and electrical properties to understand device structures and their performance.

36 MATERIALS SCIENCE↗