Search NASA⌕ Search

SEARCH · Search NASA

Results for “Value function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Estimation of micro-Hall-Petch coefficients for prismatic slip system in Mg-4Al as a function of grain boundary parameters

Grain size strengthening, referred to as the Hall-Petch effect, is a common strategy to improve the yield strength of magnesium (Mg) alloys. Several experimental studies have reported that the Hall-Petch slope strongly depends on the texture of the alloy. This effect arises from altering grain boundaries (GBs) resistance to different slip systems to transfer across adjacent grains. The grain boundary barrier strength of certain grain boundaries to basal slip, referred to as basal micro-Hall-Petch, was investigated in the previous work. Here in this study, the micro-Hall-Petch coefficient values for the prismatic slip $(k^{prismatic}_{μ})$ in Mg-4Al and their correlation with the grain boundary parameters were investigated. An experimental method was developed to initiate the prismatic slip band at low-stress levels. High-resolution electron backscatter diffraction (HR-EBSD) was used to measure the residual stress tensor, from which the resolved shear stress ahead of blocked prismatic slip bands was computed for seven different grain boundaries. $(k^{prismatic}_{μ})$ values for each individual GB were calculated by coupling the stress profile information with a continuum dislocation pile-up model. The $(k^{prismatic}_{μ})$ values vary from 0.138 MPa.m 1/2 to 0.685 MPa. m 1/2 which are almost three times larger than the calculated values for the basal micro-Hall-Petch. The $(k^{prismatic}_{μ})$ values were correlated with the GB parameters, and a functional relationship depending on the two most effective angles, the angle between the traces of the slip planes on the GB plane ($\phi$) and the angle between incoming and outgoing slip directions (κ), was proposed to estimate the Hall-Petch barrier for prismatic slip system. The work provides coefficients that can be supplied as input to crystal plasticity models to couple the effect of texture and grain size effectively.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Measurements of the Higgs boson production cross section in the four-lepton final state in proton-proton collisions at $\sqrt{s}$ = 13.6 TeV

The measurements of the Higgs boson (H) production cross sections performed by the CMS Collaboration in the four-lepton (4ℓ, ℓ = e, μ) final state at a center-of-mass energy $\sqrt{s}$ = 13.6 TeV are presented. These measurements are based on data collected with the CMS detector at the CERN LHC in 2022, corresponding to an integrated luminosity of 34.7 fb −1 . Cross sections are measured in a fiducial region closely matching the experimental acceptance, both inclusively and differentially, as a function of the transverse momentum and the absolute value of the rapidity of the four-lepton system. The H → ZZ → 4ℓ inclusive fiducial cross section is measured to be ${2.89}_{-0.49}^{+0.53}{\left({\text{stat}}\right)}_{-0.21}^{+0.29}\left({\text{syst}}\right)$ fb, in agreement with the standard model expectation of ${2.89}_{-0.49}^{+0.53}{\left({\text{stat}}\right)}_{-0.21}^{+0.29}\left({\text{syst}}\right)$ fb.

Higgs physics↗
DOE OSTI2018

Improved integrability and boundedness of solutions to some high-order variational problems

We give a series of results on the improved integrability and boundedness of solutions to several high-order variational problems with strengthened coercivity. In particular, we consider the homogeneous Dirichlet problem on the minimum of integral functionals and study variational inequalities with unilateral and bilateral obstacles and with integral and gradient constraints.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Magnetized orbifolds and localized flux

Magnetized orbifolds play an important role in compactifications of string theories and higher-dimensional field theories to four dimensions. Magnetic flux leads to chiral fermions, it can be a source of supersymmetry breaking and it is an important ingredient of moduli stabilization. Flux quantization on orbifolds is subtle due to the orbifold singularities. Generically, Wilson line integrals around these singularities are non-trivial, which can be interpreted as localized flux. As a consequence, flux densities on orbifolds can take the same values as on tori. We determine the transition functions for the flux vector bundle on the orbifold T 2 /Z 2 and the related twisted boundary conditions of zero-mode wave functions. We also construct “untwisted” zero-mode functions that are obtained for singular vector fields related to the Green’s function on a torus, and we discuss the connection between zeros of the wave functions and localized flux. Twisted and untwisted zero-mode functions are related by a singular gauge transformation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Three-dimensional explicit finite element formulation for shear localization with global tracking of embedded weak discontinuities

Shear localization is a damage mechanism characterized by the concentration of plastic deformation within thin bands of materials, often observed as a precursor to failure in metals. In this study, we present a three-dimensional explicit finite element formulation with embedded weak discontinuities for the treatment of shear localization under dynamic loading conditions. In this formulation, the onset of localization is detected via a material stability analysis suitable for rate-sensitive materials, and the continuity of propagating shear bands is ensured using a global tracking strategy involving a heat-conduction type boundary value problem, solved for a scalar level set function over the global domain of the problem. In addition, we propose a modified quadrature rule that is used to compute the contribution of an individual element to the global finite element arrays, taking into account the position of the embedded shear band within that element.

42 ENGINEERING↗
DOE OSTI2019

Margins associated with loss of assured safety for systems with multiple weak links and strong links

Representations for margins associated with loss of assured safety (LOAS) for weak link (WL)/strong link (SL) systems involving multiple time-dependent failure modes are developed. Additionally, the following topics are described: (i) defining properties for WLs and SLs, (ii) background on cumulative distribution functions (CDFs) for link failure time, link property value at link failure, and time at which LOAS occurs, (iii) CDFs for failure time margins defined by (time at which SL system fails) - (time at which WL system fails), (iv) CDFs for SL system property values at LOAS, (v) CDFs for WL/SL property value margins defined by (property value at which SL system fails) - (property value at which WL system fails), and (vi) CDFs for SL property value margins defined by (property value of failing SL at time of SL system failure) - (property value of this SL at time of WL system failure). Included in this presentation is a demonstration of a verification strategy based on defining and approximating the indicated margin results with (i) procedures based on formal integral representations and associated quadrature approximations and (ii) procedures based on algorithms for sampling-based approximations.

42 ENGINEERING↗
DOE OSTI2018

Real-Time XANES Measurement of Se Reduction by Zerovalent Iron in a Flow-through Cell, and Accompanying Se Isotope Measurements

An anoxic flow-through cell experiment was conducted to examine mechanisms controlling the real-time reduction of selenate (Se(VI)) by zerovalent iron (ZVI), which is commonly used in permeable reactive barriers to treat dissolved contaminants including Se(VI). Changes in selenium (Se) isotope composition were examined by increasing the influent Se concentration over time, thus changing the proportion of Se removed from solution. At the conclusion of the experiment, an anoxic Se-free solution was pumped through the cell to assess the stability of the reaction products. At all stages, X-ray absorption data were obtained from the solid phase and Se isotope data from the aqueous phase. Reduced Se in the form of adsorbed Se(IV), Fe 2 SeO 4 , Se(0), and iron selenides accumulated on the ZVI over time. A linear regression function was fit to the $δ$ 82/76 Se values of the effluent, yielding an isotopic separation of 9.6‰. A Rayleigh curve was fit to the isotope data from the effluent samples collected during the rinse stage with an effective fractionation of 2.4‰. The results from this experiment can be used to elucidate the effect of multiple concurrent mechanisms on Se isotope behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The [M 6 (S 2 C 2 Ph 2 ) 6 ] (M = Ni, Pd, Pt) Series: Multielectron Reservoirs That Sustain Ligand-Based Oxidations and Metal-Based Reductions

A complete [M 6 (S 2 C 2 R 2 ) 6 ] series (M = Ni (1), Pd (2), Pt (3); R = Ph), the rarest variety among homoleptic dithiolene transition-metal compounds, has been prepared by reaction between [M(S 2 C 2 Ph 2 ) 2 ] and a M 0 source. The platinum member of this set is the first of its type. Diffraction-quality crystals, grown with high reproducibility by evaporation from PhNO 2 solutions, reveal fully reduced [Ph 2 C 2 S 2 ] 2– dianions and an octahedral M 6 core that is reduced to C 2 symmetry by the fusion of a mononuclear D 2h [M(S 2 C 2 Ph 2 ) 2 ] fragment upon a C 4 -symmetric base. The [Ni 6 (S 2 C 2 Ph 2 ) 2 ] 1– monoanion, prepared by Cp* 2 Co reduction, shows only modest structural differences from its neutral counterpart. In CH 2 Cl 2 , 1 and 2 can undergo two reductions and an oxidation, while 3 sustains two reductions and two oxidations. In benzonitrile, 1 sustains three reversible oxidations at potentials that are shifted appreciably to less positive values. The cathodic processes are shown by density functional theory (DFT) calculations to involve an MO largely of metal–sulfur composition that has contributions throughout the C 4 -symmetric pentametallic base of the assembly, while the oxidations are largely ligand-based and confined to the monometallic [M(S 2 C 2 Ph 2 ) 2 ] cap. The absorption spectra are marked by multiple overlapping bands that produce a continuous, tapering absorption profile of unresolved shoulders and swells.

Ligands↗
DOE OSTI2019

How Well Does the Hole-Burning Action Spectrum Represent the Site-Distribution Function of the Lowest-Energy State in Photosynthetic Pigment–Protein Complexes?

Here for the first time, we combined Monte-Carlo and nonphotochemical hole burning (NPHB) master equation approaches to allow for ultra-high resolution (<0.005 cm -1 , smaller than the typical homogeneous line widths at 5 K) simulations of the NPHB spectra of dimers and trimers of interacting pigments. These simulations reveal significant differences between the zero-phonon hole (ZPH) action spectrum and the site-distribution function (SDF) of the lowestenergy state. The NPHB of the lowest-energy pigment, following the excitation energy transfer (EET) from the higher-energy pigments which are excited directly, results in the shifts of all excited states. These shifts affect the ZPH action spectra and EET times derived from the widths of the spectral holes burned in the donor-dominated regions. The effect is present for a broad variety of realistic anti-hole functions and it is maximal at relatively low values of inter-pigment coupling (V ≤ 5 cm -1 ) where the use of the Förster approximation is justified. These findings need to be considered in interpreting various optical spectra of photosynthetic pigment-protein complexes for which SDFs (describing the inhomogeneous broadening) are often obtained directly from the ZPH action spectra. Water-soluble chlorophyll-binding protein (WSCP) was considered as an example.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spectral Element Modeling of Acoustic to Seismic Coupling Over Topography

Acoustic waves in the atmosphere are commonly recorded on seismometers as they couple into the ground. These signals, here called ground coupled airwaves, are not commonly considered in numerical modeling of infrasound propagation, which often assumes a rigid unmeshed boundary. Starting from an analytically-tractable spherical wave model, we analyze how the coupling of an acoustic wave into a planar elastic halfspace changes over a wide range of scenarios. We use energy admittance to quantify acoustic to seismic coupling over both a planar elastic halfspace and meshed topography. Our spectral element and analytic calculations have different maxima as a function of incidence angle, with very high admittance values for near-vertical incidence (maximum ≈78%). Energy admittance calculations at shallow incidence angles are much smaller (less than 1%). In simulations over the complex topography of Sakurajima Volcano, we attribute the variable spatial pattern of energy admittance to changes in earth parameters between each model. The observed pressure difference over the simulated 15 km region appears to be < 2%. While this value is relatively small, the cumulative addition over 100s of km and multiple acoustic bounce points may be significant. Acoustic to seismic coupling along the propagation path may bias long distance yield estimates, particularly when infrasound propagates over regions with steep topography or particularly slow seismic velocities, such as alluvial planes.

58 GEOSCIENCES↗
DOE OSTI2019

Highly Plasmonic Titanium Nitride by Room-Temperature Sputtering

Titanium nitride (TiN) has recently emerged as an attractive alternative material for plasmonics. However, the typical high-temperature deposition of plasmonic TiN using either sputtering or atomic layer deposition has greatly limited its potential applications and prevented its integration into existing CMOS device architectures. Here, we demonstrate highly plasmonic TiN thin films and nanostructures by a room-temperature, low-power, and bias-free reactive sputtering process. We investigate the optical properties of the TiN films and their dependence on the sputtering conditions and substrate materials. We find that our TiN possesses one of the largest negative values of the real part of the dielectric function as compared to all other plasmonic TiN films reported to date. Two-dimensional periodic arrays of TiN nanodisks are then fabricated, from which we validate that strong plasmonic resonances are supported. Our room-temperature deposition process can allow for fabricating complex plasmonic TiN nanostructures and be integrated into the fabrication of existing CMOS-based photonic devices to enhance their performance and functionalities.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Vertical detachment energies of ammonia cluster anions using self-interaction-corrected methods

Systems with weakly bound extra electrons impose great challenges to semilocal density functional approximations (DFAs), which suffer from self-interaction errors. Small ammonia clusters are one such example of weakly bound anions where the extra electron is weakly bound. We applied two self-interaction correction (SIC) schemes, viz., the well-known Perdew–Zunger and the recently developed locally scaled SIC (LSIC) with the local spin density approximation (LSDA), Perdew–Burke–Ernzerhof (PBE) generalized gradient approximation (GGA), and the SCAN meta-GGA functionals to calculate the vertical detachment energies (VDEs) of small ammonia cluster anions (NH3)n–. Our results show that the LSIC significantly reduces the errors in calculations of VDE with LSDA and PBE-GGA functionals leading to better agreement with the reference values calculated with coupled cluster singles and doubles with perturbative triples [CCSD(T)]. Accurate prediction of VDE as an absolute of the highest occupied molecular orbital (HOMO) is challenging for DFAs. Our results show that VDEs estimated from the negative of HOMO eigenvalues with the LSIC-LSDA and Perdew–Zunger SIC-PBE are within 11 meV of the reference CCSD(T) results. Here, the LSIC method performs consistently well for the VDE estimates, from both the total energy differences and the absolute HOMO eigenvalues.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Scale translation yields insights into gas adsorption under nanoconfinement

This work describes a scale-translating simulation framework to investigate gas adsorption behavior in nanoconfined pores. The framework combines molecular simulations (MSs), equation of state (EoS), and lattice Boltzmann (LB) simulations. MSs reveal the physics of methane adsorption in nano-sized pores, where input values of fugacity coefficients are optimized based on EoS predictions. Then, an LB free-energy model, which incorporates a viral EoS, upscales intermolecular forces and estimates adsorption behavior via a proposed fluid–wall interaction model. Armed with the values of the LB interaction parameter as a function of pressure, the LB model is used to predict fluid behavior in irregular nanopores, and the results are validated against reference MS data. The LB model is then used to study adsorption behavior at a continuum scale in representative organic shale nanopores based on finely characterized Vaca Muerta shale samples. Furthermore, the results show that methane adsorption could significantly increase contained fluids by 10%–25% in pores smaller than 20 nm. However, in larger pores (40 nm to 90 nm), adsorption's impact diminishes to 2%–3%, suggesting sorption's negligible role beyond a 40 nm pore size.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Charge regulation effects on colloidal mixture nanoparticles

Changes in pH within a system containing dissociable sites affect the protonation and deprotonation of these groups, thereby influencing their physical properties. In response, the system modifies their surface charge, affecting electrostatic interactions, aggregation, stability, and structural behavior. Although the pH can be tuned in experiments, it is difficult to model this phenomenon using simulations or theoretical approaches. Here, we perform hybrid Monte Carlo-molecular dynamics simulations to model charge regulation effects in an equimolar colloidal charged system. We compare charge regulation effects with those of a system in which the charges of colloidal nanoparticles are not dissociable. The comparison between the two cases modifies the phase diagram, and it changes the volume fraction where a percolation network of nanoparticles is found. Charge regulation is found to destroy network formation, as the charge in the nanoparticles is modified because of the cooperativity dependency of the degree of charge dissociation sites among the nanoparticles favoring cluster formation. Furthermore, our work suggests that the ionic and/or electronic conductivity in functionalized nanoparticles can be modified by changing pH values. It also guides the experimental design of oppositely charged nanoparticles as inks for 3D printing processes.

Classical statistical mechanics↗
DOE OSTI2024

The charge and mass symmetry breaking in the KK K¯ system

Abstract In the framework of the Faddeev equations in configuration space, we investigate theK(1460) meson as a resonant state of the KK K ¯ kaonic system. We perform calculations for the particle configurationsK 0 K + K − and K 0 K + K 0 ¯ within two models: theABCmodel, in which all three particles are distinguishable, and theAACmodel when two particles are identical. The models differ in their treatment of the kaon mass difference and the attractive Coulomb force between theK + K − pair. We found that the Coulomb shift adds over 1 MeV to the three-body binding energy. The expected correction to the binding energy due to mass redistribution fromAAtoABis found to be negligible, up to a maximum of 6% of the relative mass correction. At the same time, the symmetry of the wave function is distorted depending on the mass ratio value. We found that the repulsiveKKinteraction plays an essential role in the binding energy of the KK K ¯ system and reports the mass of 1461.8 or 1464.1 MeV for the neutralK 0 (1460) and 1466.5 or 1468.8 MeV for the chargedK + (1460) resonances, respectively, depending on the parameter sets forKKand K K ¯ interactions.

Physics↗
DOE OSTI2025

Particle acceleration during classical phase transitions on a spherical lattice

Abstract When compressed, certain lattices undergo phase transitions that may allow nuclei to gain significant kinetic energy. To explore the dynamics of this phenomenon, we develop a methodology to study Coulomb coupled N -body systems constrained to a sphere, as in the Thomson problem. We initialize N total Boron nuclei as point particles on the surface of the sphere, allowing them to equilibrate via Coulomb scattering with a viscous damping term. To simulate a phase transition, we remove N rm particles, forcing the system to rearrange into a new equilibrium. With this model, we consider the Thomson problem as a dynamical system, providing a framework to explore how non-zero temperature affects structural imperfections in Thomson minima. We develop a scaling relation for the average peak kinetic energy attained by a single particle as a function of N and N rm . For certain values of N , we find an order of magnitude energy gain when increasing N rm from 1 to 6. The model may help to design a lattice that maximizes the energy output.

Bachmann, Aidan M. (ORCID:0000000294706404)↗
DOE OSTI2020

The completed SDSS-IV extended baryon oscillation spectroscopic survey: pairwise-inverse probability and angular correction for fibre collisions in clustering measurements

ABSTRACT The completed extended Baryon Oscillation Spectroscopic Survey (eBOSS) catalogues contain redshifts of 344 080 quasars at 0.8 < z < 2.2, 174 816 luminous red galaxies between 0.6 < z < 1.0, and 173 736 emission-line galaxies over 0.6 < z < 1.1 in order to constrain the expansion history of the Universe and the growth rate of structure through clustering measurements. Mechanical limitations of the fibre-fed spectrograph on the Sloan telescope prevent two fibres being placed closer than 62 arcsec in a single pass of the instrument. These ‘fibre collisions’ strongly correlate with the intrinsic clustering of targets and can bias measurements of the two-point correlation function resulting in a systematic error on the inferred values of the cosmological parameters. We combine the new techniques of pairwise-inverse probability and the angular upweighting (PIP+ANG) to correct the clustering measurements for the effect of fibre collisions. Using mock catalogues, we show that our corrections provide unbiased measurements, within data precision, of both the projected $\rm {\mathit{ w}_p}\left(\mathit{ r}_p\right)$ and the redshift-space multipole ξ(ℓ = 0, 2, 4)(s) correlation functions down to $0.1\, h^{-1}{\rm Mpc}$, regardless of the tracer type. We apply the corrections to the eBOSS DR16 catalogues. We find that, on scales $s\gtrsim 20\, h^{-1}{\rm Mpc}$ for ξℓ, as used to make baryon acoustic oscillation and large-scale redshift-space distortion measurements, approximate methods such as nearest-neighbour upweighting are sufficiently accurate given the statistical errors of the data. Using the PIP method, for the first time for a spectroscopic program of the Sloan Digital Sky Survey, we are able to successfully access the one-halo term in the clustering measurements down to $\sim 0.1\, h^{-1}{\rm Mpc}$ scales. Our results will therefore allow studies that use the small-scale clustering to strengthen the constraints on both cosmological parameters and the halo occupation distribution models.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

A study of outer disc stellar populations of face-on star-forming galaxies in SDSS-IV MaNGA: causes of H α deficiency

ABSTRACT Integral field unit spectra of face-on star-forming galaxies from the MaNGA survey are stacked in radial bins so as to reach an S/N high enough to measure emission lines and Lick indices out to 2.5–3Re. Two-thirds of galaxies have stellar populations in the outer discs that are older, more metal poor, and less dusty than in the inner discs. Recent bursts of star formation have occurred more frequently in the outer disc, but extinction-corrected H α equivalent widths are significantly lower at fixed Dn(4000) in these regions. I examine the properties of a subset of galaxies with the most H α-deficient outer discs. These regions contain young stellar populations that must have formed within the last 0.5 Gyr, but have extinction-corrected H α values well below the values predicted for a standard Kroupa initial mass function. The H α-deficient galaxies have flat Dn(4000) and H δA profiles with little radial fluctuation, indicating that star formation has occurred extremely uniformly across the entire disc. The H α line profiles indicate that the ionized gas kinematics is also very regular across the disc. The main clue to the origin of the H α deficiency is that it sets in at the same radius where the dust extinction abruptly decreases, suggesting a mode of star formation deficient in massive stars in quiescent, H i-dominated gas. Finally, I have carried out a search for galaxies with signatures of unusual H α kinematics and find that 15 per cent of the sample exhibits evidence for significant ionized gas that is displaced from the systemic velocity of the disc.

79 ASTRONOMY AND ASTROPHYSICS↗