Search NASA⌕ Search

SEARCH · Search NASA

Results for “Vertical temperature structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Hourly observations of the jet stream - Wind shear, Richardson number and pilot reports of turbulence

Results are presented of observations of the jet stream made on the basis of over 400 hr of wind and temperature data taken during two prolonged jet stream passages above western and central Pennsylvania during mid-November 1986 and mid-January 1987. Wind profilers are found to be far better suited for the detailed examination of jet stream structure than are weather balloons. The combination of good vertical resolution with not previously obtained temporal resolution reveals structural details not seen before. Development of probability forecasts of turbulence based on wind profiler-derived shear values appears possible. A good correlation between pilot reports and turbulence and wind shear is found.

Syrett, William J.↗

Coupled ice-ocean variability in the Greenland Sea

A major surface feature of the Greenland Sea during winter is the frequent eastward extension of sea ice south of 75 deg N and an associated embayment to the north. These features are nominally connected with the East Greenland Current, and both the promontory) and the embayment are readily apparent on climatic ice charts. However, there are significant changes in these features on time-scales as short as a few days. Using a combination of satellite microwave images (SSM/I) of ice cover, meteorological data and in situ velocity, temperature and salinity records, we relate the ice distribution and its changes to the developing structure and circulation of the upper ocean during winter 1988-1989. Our measurements illustrate the preconditioning that leads to convective overturn, which in turn brings warmer water to the surface and results in the rapid disappearance of ice. In particular, the surface was cooled to the freezing point by early December and the salinity then increased through ice formation (about 0.016 m/d) and brine rejection. Once the vertical density gradient was sufficiently eroded, a period of high heat flux (greater than 300 W/sq m) in late January provided enough buoyancy loss to convectively mix the upper water column to at least 200 m. We estimate vertical velocities at about 3 cm/s downward during the initial sinking. The deepening of the thermocline raised surface temperatures by over 1 C resulting in nearly 1.5 x 105 km of ice-melt within two days. Average rates of ice retreat are about 2 km/d southwestward, generally consistent with a wind-driven flow. Comparison of hydrographic surveys from before and after the overturning indicate the fresh water was advected out of the area, possibly to the south and east of our moorings.

Roach, A. T.↗

Vertical structure of the atmosphere of Venus from Pioneer Venus orbiter radio occultations

Between December 1978 and February 1979 the Pioneer Venus orbiter spacecraft returned some 140 S band and X band radio occultation measurements of the Venus atmosphere. Results from 13 measurements, covering diverse latitudes from near equatorial to polar, are presented in this paper in the form of vertical profiles of temperature. The temperature profiles show a pronounced inversion at the tropopause for latitudes higher than about 50 deg, with the deepest inversions occurring between the latitudes of 60 deg and 70 deg, the latitudes at which the cold collar cloud feature was observed by the Pioneer Venus Vortex instrument. A comparison of the temperature profiles derived from radio occultation measurements with the stratospheric infrared temperature soundings of the Vortex instrument and the in situ measurements of tropospheric temperature and pressure by the North, Sounder, and Day probes indicates excellent agreement.

Kliore, A. J.↗

Summertime Post-Cold-Frontal Marine Stratocumulus Transition Processes over the Eastern North Atlantic

Abstract Marine boundary layer (MBL) cloud morphology associated with two summertime cold fronts over the eastern North Atlantic (ENA) is investigated using high-resolution simulations from the Weather Research and Forecasting (WRF) Model and observations from the Atmospheric Radiation Measurement (ARM) ENA Climate Research Facility. Lagrangian trajectories are used to study the evolution of post-cold-frontal MBL clouds from solid stratocumulus to broken cumulus. Clouds within specified domains in the vicinity of transitions are classified according to their degree of decoupling, and cloud-base and cloud-top breakup processes are evaluated. The Lagrangian derivative of the surface latent heat flux is found to be strongly correlated with that of the cloud fraction at cloud base in the simulations. Cloud-top entrainment instability (CTEI) is shown to operate only in the decoupled MBL. A new indicator of inversion strength at cloud top that employs the vertical gradients of equivalent potential temperature and saturation equivalent potential temperature, which can be computed directly from soundings, is proposed as an alternative to CTEI. Overall, results suggest that the deepening–warming hypothesis suggested by Bretherton and Wyant explains many of the characteristics of the summertime postfrontal MBL evolution of cloud structure over the ENA, thereby widening the phase space over which the hypothesis may be applied. A subset of the deepening–warming hypothesis involving warming initially dominating over moistening is proposed. It is postulated that changes in climate change–induced modifications in cold-frontal structure over the ENA may be accompanied by coincident changes in the location and timing of MBL cloud transitions in the post-cold-frontal environment.

54 ENVIRONMENTAL SCIENCES↗

Theoretical and experimental studies of baroclinic processes

The geophysical fluid flow simulation code, GEOSIM, is being used to study the phenomenon of vacillation in the baroclinic annulus. Having verified that the code predicts vacillation for the same points as the experiments, the work is aiming toward explaining the mechanics of vacillation and pointing out some of the sensitivities of the results to the numerical method. Researchers are finding that there is a structural change associated with amplitude vacillation, where the structural changes are in the vertical. The results disagree with the premise of Lindzen et al, that the vacillation is due to constructive and destructive interference of neutral modes with different phase speeds. The researchers are continuing to study the Spacelab 3 Geophysical Fluid Flow Cell (GFFC) results with horizontal temperature gradients and heating from below. GEOSIM has been used to compute a wide range of cases, and these are being compared with the observations. The computations and observations compare well, and the model is being used to extend the results beyond cases studied in the experiments and to study the mechanics and predictability of the flows. The study of fully nonlinear baroclinic instability using the GFFC apparatus is proceeding with the numerical code. While the first instability that occurs is of planetary scale, secondary instabilities consisting of small-scale, penetrative convection occurs where cold fluid flows over a warm surface. The simultaneous modeling of the planetary scale and the convective scale is possible because of the nonhydrostatic formulation of the model. Some of these results have been animated on the Stardent computer, which shows the explosive nature of the small-scale convection.

Miller, Tim↗

The abundance and distribution of water vapor in the Jovian troposphere as inferred from Voyager IRIS observations

The Voyager IRIS spectra of the Jovian North Equatorial Belt (NEB) hot spots are reanalyzed using a radiative transfer model which includes the full effects of anisotropic multiple scattering by clouds. The atmospheric model includes the three thermochemically predicted cloud layers, NH3, NH4SH, and H2O. Spectrally dependent cloud extinction is modeled using Mie theory and the refractive indices of NH3 ice, NH4SH ice, water, and H2O ice. The upper tropospheric temperature profile, gas abundances, height-dependent parahydrogen profile, and vertical distribution of NH3 cloud opacity are retrieved from an analysis of the far-infrared (180-1200/cm) IRIS observations. With these properties constrained, the 5-micron (1800-2300/cm) observations are analyzed to determine the atmospheric and cloud structure of the deeper atmosphere (P of greater than 1.5 bars). The results show that the abundance of water is at least 1.5 times solar with 2 times solar (0.00276 mixing ratio relative to H2) providing the best-fit to the Voyager IRIS hot spot observations.

Carlson, Barbara E.↗

New series of triple molybdates AgA{sub 3}R(MoO{sub 4}){sub 5} (A=Mg, R=Cr, Fe; A=Mn, R=Al, Cr, Fe, Sc, In) with framework structures and mobile silver ion sublattices

Triple molybdates AgA{sub 3}R(MoO{sub 4}){sub 5} (A=Mg, R=Cr, Fe; A=Mn, R=Al, Cr, Fe, Sc, In) of the NaMg{sub 3}In(MoO{sub 4}){sub 5} type were synthesized and single crystals of AgMg{sub 3}R(MoO{sub 4}){sub 5} (R=Cr, Fe) were grown. In their structures, the MoO{sub 4} tetrahedra, pairs and trimers of edge-shared (Mg, R)O{sub 6} octahedra are connected by common vertices to form a 3D framework. Large framework cavities involve Ag{sup +} cations disordered on three nearby positions with CN=3+1 or 4+1. Alternating (Mg, R)O{sub 6} octahedra and MoO{sub 4} tetrahedra in the framework form quadrangular windows penetrable for Ag{sup +} at elevated temperatures. Above 653–673 K, the newly obtained molybdates demonstrate abrupt reduction of the activation energy to 0.4–0.6 eV. At 773 K, AgMg{sub 3}Al(MoO{sub 4}){sub 5} shows electric conductivity 2.5·10{sup −2} S/cm and E{sub a}=0.39 eV compatible with characteristics of the best ionic conductors of the NASICON type. - Graphical abstract: Triple molybdates AgA{sub 3}R(MoO{sub 4}){sub 5} (A=Mg, R=Cr, Fe; A=Mn, R=Al, Cr, Fe, Sc, In) of the NaMg{sub 3}In(MoO{sub 4}){sub 5} type were synthesized, AgMg{sub 3}R(MoO{sub 4}){sub 5} (R=Cr, Fe) were structurally characterized, ion-conductive properties of AgMg{sub 3}Al(MoO{sub 4}){sub 5} were measured. Display Omitted - Highlights: • Triple molybdates AgA{sub 3}R(MoO{sub 4}){sub 5} (A=Mg, R=Cr, Fe; A=Mn, R=Al, Cr, Fe, Sc, In) of the NaMg{sub 3}In(MoO{sub 4}){sub 5} type were synthesized. • Single crystals of AgMg{sub 3}R(MoO{sub 4}){sub 5} (R=Cr, Fe) were grown and their crystal structures were determined. • Disordering Ag{sup +} ions and penetrable framework structures of AgMg{sub 3}R(MoO{sub 4}){sub 5} (R=Cr, Fe) suggest 2D-character of silver-ion mobility. • Measured ion-conductive properties of AgMg{sub 3}Al(MoO{sub 4}){sub 5} are compatible with characteristics of the best ionic conductors of the NASICON type.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Challenges in process integration of catalytic DC plasma synthesis of vertically aligned carbon nanofibres

The ability to synthesize free-standing, individual carbon nanofibres (CNFs) aligned perpendicularly to a substrate has enabled fabrication of a large array of devices with nanoscale functional elements, including electron field emission sources, electrochemical probes, neural interface arrays, scanning probes, gene delivery arrays and many others. This was made possible by development of a catalytic plasma process, with DC bias directing the alignment of nanofibres. Successful implementation of prototypical devices has uncovered numerous challenges in the integration of this synthesis process as one of the steps in device fabrication. This article is dedicated to these engineering and fundamental difficulties that hinder further device development. Relatively high temperature for catalytic synthesis, electrical conductivity of the substrate to maintain DC discharge and other difficulties place restrictions on substrate material. Balancing non-catalytic carbon film deposition and substrate etching, non-uniformity of plasma due to growth of the high aspect ratio structures, plasma instabilities and other factors lead to challenges in controlling the plasma. Ultimately, we find controlling the atomistic processes at the catalyst nanoparticle (NP) and the behaviour of the NP is the central challenge of plasma nanosynthesis of vertically aligned CNFs.

36 MATERIALS SCIENCE↗

Jovian atmosphere - Structure and composition between the turbopause and the mesopause

The occultation of the star Beta Scorpii by Jupiter was observed at high time resolution in three wavelength channels. The results imply a temperature of 220 K at an altitude in the Jovian atmosphere corresponding to 100 trillion molecules per cubic centimeter, and temperature fluctuations of 2 to 10 K over vertical scales of 2 to 10 kilometers. They suggest that the vertical eddy diffusion coefficient near the turbopause has a lower limit of 700,000 square centimeters per second, and that the turbopause lies above the altitude where the density is 50 trillion molecules per cubic centimeter. Below the turbopause, the ratio of hydrogen to helium is consistent with cosmic abundances.

Sagan, C.↗

GLOBAL MODELING OF NEBULAE WITH PARTICLE GROWTH, DRIFT, AND EVAPORATION FRONTS. I. METHODOLOGY AND TYPICAL RESULTS

We model particle growth in a turbulent, viscously evolving protoplanetary nebula, incorporating sticking, bouncing, fragmentation, and mass transfer at high speeds. We treat small particles using a moments method and large particles using a traditional histogram binning, including a probability distribution function of collisional velocities. The fragmentation strength of the particles depends on their composition (icy aggregates are stronger than silicate aggregates). The particle opacity, which controls the nebula thermal structure, evolves as particles grow and mass redistributes. While growing, particles drift radially due to nebula headwind drag. Particles of different compositions evaporate at “evaporation fronts” (EFs) where the midplane temperature exceeds their respective evaporation temperatures. We track the vapor and solid phases of each component, accounting for advection and radial and vertical diffusion. We present characteristic results in evolutions lasting 2 × 10{sup 5} years. In general, (1) mass is transferred from the outer to the inner nebula in significant amounts, creating radial concentrations of solids at EFs; (2) particle sizes are limited by a combination of fragmentation, bouncing, and drift; (3) “lucky” large particles never represent a significant amount of mass; and (4) restricted radial zones just outside each EF become compositionally enriched in the associated volatiles. We point out implications for millimeter to submillimeter SEDs and the inference of nebula mass, radial banding, the role of opacity on new mechanisms for generating turbulence, the enrichment of meteorites in heavy oxygen isotopes, variable and nonsolar redox conditions, the primary accretion of silicate and icy planetesimals, and the makeup of Jupiter’s core.

79 ASTRONOMY AND ASTROPHYSICS↗

Possible effects of solar UV variations on ozone and climate

A one-dimensional photochemical model was used to estimate the consequences of 27-day, 11-year, 22-year, and several-hundred-year variations of ultraviolet solar radiation on the concentration of ozone and nitrogen dioxide, and a one-dimensional radiative-convective equilibrium model was used to assess the joint effect of the radiation and concentration variations on the global temperature structure. For the several-hundred-year variations, the ozone column density increases by about 17.5% from minimum to maximum solar UV flux. For the 11-year period the ozone column density fluctuates by only about 7%, the lack of a full response being due to the time required for vertical motions to redistribute ozone from the altitudes of maximum production to those of maximum steady-state value. The 22-year period shows a full response, which the density varies by less than a percent for the 27-day period. Climatic consequences of these results are briefly discussed.

Pollack, J. B.↗

Investigations of Control Surface Seals for Re-entry Vehicles

Re-entry vehicles generally require control surfaces (e.g., rudders, body flaps) to steer them during flight. Control surface seals are installed along hinge lines and where control surface edges move close to the vehicle body. These seals must operate at high temperatures and limit heat transfer to underlying structures to prevent them from overheating and causing possible loss of vehicle structural integrity. This paper presents results for thermal analyses and mechanical testing conducted on the baseline rudder/fin seal design for the X-38 re-entry vehicle. Exposure of the seals in a compressed state at the predicted peak seal temperature of 1900 F resulted in loss of seal resiliency. The vertical Inconel rudder/fin rub surface was re-designed to account for this loss of resiliency. Room temperature compression tests revealed that seal unit loads and contact pressures were below limits set to protect Shuttle thermal tiles on the horizontal sealing surface. The seals survived an ambient temperature 1000 cycle scrub test over sanded Shuttle tiles and were able to disengage and re-engage the tile edges during testing. Arc jet tests confirmed the need for seals in the rudder/fin gap location because a single seal caused a large temperature drop (delta T = 1710 F) in the gap.

Dunlap, Patrick H., Jr.↗

Competing Interface and Bulk Effect–Driven Magnetoelectric Coupling in Vertically Aligned Nanocomposites

Abstract Room‐temperature magnetoelectric (ME) coupling is developed in artificial multilayers and nanocomposites composed of magnetostrictive and electrostrictive materials. While the coupling mechanisms and strengths in multilayers are widely studied, they are largely unexplored in vertically aligned nanocomposites (VANs), even though theory has predicted that VANs exhibit much larger ME coupling coefficients than multilayer structures. Here, strong transverse and longitudinal ME coupling in epitaxial BaTiO 3 :CoFe 2 O 4 VANs measured by both optical second harmonic generation and piezoresponse force microscopy under magnetic fields is reported. Phase field simulations have shown that the ME coupling strength strongly depends on the vertical interfacial area which is ultimately controlled by pillar size. The ME coupling in VANs is determined by the competition between the vertical interface coupling effect and the bulk volume conservation effect. The revealed mechanisms shed light on the physical insights of vertical interface coupling in VANs in general, which can be applied to a variety of nanocomposites with different functionalities beyond the studied ME coupling effect.

36 MATERIALS SCIENCE↗

Videogrammetric Model Deformation Measurement Technique for Wind Tunnel Applications

Videogrammetric measurement technique developments at NASA Langley were driven largely by the need to quantify model deformation at the National Transonic Facility (NTF). This paper summarizes recent wind tunnel applications and issues at the NTF and other NASA Langley facilities including the Transonic Dynamics Tunnel, 31-Inch Mach 10 Tunnel, 8-Ft high Temperature Tunnel, and the 20-Ft Vertical Spin Tunnel. In addition, several adaptations of wind tunnel techniques to non-wind tunnel applications are summarized. These applications include wing deformation measurements on vehicles in flight, determining aerodynamic loads based on optical elastic deformation measurements, measurements on ultra-lightweight and inflatable space structures, and the use of an object-to-image plane scaling technique to support NASA s Space Exploration program.

Barrows, Danny A.↗

Cryogenic Etching of Silicon: An Alternative Method for Fabrication of Vertical Microcantilever Master Molds

This paper examines the use of deep reactive ion etching of silicon with fluorine high-density plasmas at cryogenic temperatures to produce silicon master molds for vertical microcantilever arrays used for controlling substrate stiffness for culturing living cells. The resultant profiles achieved depend on the rate of deposition and etching of an SiO{sub x}F{sub y} polymer, which serves as a passivation layer on the sidewalls of the etched structures in relation to areas that have not been passivated with the polymer. We look at how optimal tuning of two parameters, the O{sub 2} flow rate and the capacitively coupled plasma power, determine the etch profile. All other pertinent parameters are kept constant. We examine the etch profiles produced using electron-beam resist as the main etch mask, with holes having diameters of 750 nm, 1 ??m , and 2 ??m.

36 MATERIALS SCIENCE↗

Vertical forces during VDEs in an ITER plasma and the role of halo currents

Vertical displacement events (VDEs) can occur in elongated tokamaks causing large currents to flow in the vessel and other adjacent metallic structures. To better understand the potential magnitude of the associated forces and the role of the so called halo currents'' on them, we have used the M3D-C1 code to simulate potential VDEs in ITER. We used actual values for the vessel resistivity and pre-quench temperatures and, unlike most of the previous studies, the halo region is naturally formed by triggering the thermal quench with an increase in the plasma thermal conductivity. We used the 2D non-linear version of the code and vary the post-thermal quench thermal conductivity profile as well as the boundary temperature in order to generate a wide range of possible cases that could occur in the experiment. We also show that, for a similar condition, increasing the halo current does not increase the total force on the wall since it is offset by a decrease in the toroidal contribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural, Optical, and Magnetic Properties of Hydrothermally Grown Fe-Doped ZnO Nanorod Arrays on Glass Substrate

In this paper, undoped and Fe-doped ZnO nanorod arrays were grown on glass substrate by a facile hydrothermal method. Structural, optical, and magnetic properties of the prepared nanorods were investigated. Structural investigation clearly showed that the prepared nanorods had single phase wurtzite structure without any secondary phases and the prepared undoped and Fe-doped nanorods were grown vertically. The optical characterization revealed that the optical band gap of ZnO nanorods was decreased by increasing the value of Fe concentration. Furthermore, the formation of diluted magnetic semiconductor nanorod arrays was verified. The origin of room temperature ferromagnetism is explained by the bound magnetic polaron concept.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

On the Breakdown of ENSO's Relationship With Thermocline Depth in the Central-Equatorial Pacific

Recent classification of El Nino-Southern Oscillation (ENSO) into two types, Eastern (EP) and Central (CP) events, has highlighted the importance of the central Pacific. We show here that the local correlation between ENSO subsurface temperatures (T sub ) in the upper 100-m and thermocline depth anomalies breaks down in the central equatorial Pacific, whereas T sub remains well correlated with sea surface height anomalies. This observed difference in the central equatorial Pacific is simulated by almost all climate models. It arises from a vertically slanted Tsub anomaly structure that is unique to the central equatorial Pacific. We show that this feature is an adiabatic response to wind-driving that is even present in a linear dynamic model, as long as the model has enough baroclinic modes to adequately represent the observed vertical complexity. Our findings have implications for better understanding the different importance of thermocline feedback in CP and EP events.

58 GEOSCIENCES↗