Search NASA⌕ Search

SEARCH · Search NASA

Results for “automatic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Automatic N(h,t) profiles of the ionosphere with a digital ionosonde

A method is described to accomplish automatic data selection and profile inversion to obtain ionospheric electron density profiles from digitized radio soundings. The profile inversion is based on a well-established formulation by which the optimum radio frequency sounding intervals can be specified from an approximate knowledge of the profile; the expected virtual height coordinates (h) at these frequencies (f) are estimated, and procedures are then used to select h(f) observations nearest the predicted coordinates from a subsequent digital ionogram. From these the next profile is obtained. The process adaptively follows the changing shape and detail of the profile. The procedure requires an average of 15 sec per profile on a standard data processing computer, and can be adapted, with benefit to online real-time use in a digital ionosonde.

Wright, J. W.↗
NASA NTRS1972

Automatic Control of Personal Rapid Transit Vehicles

The requirements for automatic longitudinal control of a string of closely packed personal vehicles are outlined. Optimal control theory is used to design feedback controllers for strings of vehicles. An important modification of the usual optimal control scheme is the inclusion of jerk in the cost functional. While the inclusion of the jerk term was considered, the effect of its inclusion was not sufficiently studied. Adding the jerk term will increase passenger comfort.

Smith, P. D.↗
NASA NTRS1973

Cardiac R-wave detector with automatic sensitivity control

An electronic circuit that automatically changes its sensitivity was developed for detecting the bioelectric signal resulting from activation of the heart's ventricles. Regulation of sensitivity was accomplished with two feedback channels that maintain the sensitivity level between an upper and a lower limit. These limits are proportional to the R-wave amplitude. Tests on an experimental circuit demonstrated a capability to reject unwanted signal noise, illustrated difficulties encountered without sensitivity control, and presented closed loop transients which occurred for step changes in R-wave amplitude.

Gebben, V. D.↗
NASA NTRS1972

Development of automatic through-insulation welding for microelectric interconnections

The capability to automatically route, remove insulation from, and weld small-diameter solid conductor wire is presented. This would facilitate the economical small-quantity production of complex miniature electronic assemblies. An engineering model of equipment having this capability was developed and evaluated. Whereas early work in the use of welded magnet wire interconnections was concentrated on opposed electrode systems, and generally used heat to melt the wire insulation, the present method is based on a concentric electrode system and a wire feed system which splits the insulation by application of pressure prior to welding. The work deals with the design, fabrication, and evaluation testing of an improved version of this concentric electrode system. Two different approaches to feeding the wire to the concentric electrodes were investigated. It was concluded that the process is feasible for the interconnection of complex miniature electronic assemblies.

Arnett, J. C.↗
NASA NTRS1972

Automatic system for computer program documentation

Work done on a project to design an automatic system for computer program documentation aids was made to determine what existing programs could be used effectively to document computer programs. Results of the study are included in the form of an extensive bibliography and working papers on appropriate operating systems, text editors, program editors, data structures, standards, decision tables, flowchart systems, and proprietary documentation aids. The preliminary design for an automated documentation system is also included. An actual program has been documented in detail to demonstrate the types of output that can be produced by the proposed system.

Simmons, D. B.↗
NASA NTRS1973

A Module for Automatic Dock and Detumble (MADD) for orbital rescue operations

The module for automatic dock and detumble (MADD) is an automated device for bringing a passive, tumbling space base under control in an orbital rescue situation. The conceptual design of such a device resulted from a consideration of tumbling motion analyses and mission constraints. Specific topics of investigation include orbit and attitude dynamics and detumble profiles. Position and attitude control systems for the various phases of operation were developed. Dynamic motion of a passive vehicle with MADD attached is considered as an example application and to determine control requirements. Since time is a critical factor in rescue operations, it is essential to execute the detumbling maneuver in a minimum of time. Optimization of the MADD thrusting sequence has also been investigated. Results indicate the control torque must be directed opposite to the angular momentum vector for the assumption used here.

Snow, W. R.↗
NASA NTRS1973

Determination of land use in Minnesota by automatic interpretation of ERTS MSS data

This program aims to determine the feasibility of identifying land use in Minnesota by automatic interpretation of ERTS-MSS data. Ultimate objectives include establishment of land use delineation and quantification by computer processing with a minimum of human operator interaction. This implies not only that reflectivity as a function of calendar time can be catalogued effectively, but also that the effects of uncontrolled variables can be identified and compensated. Clouds are the major uncontrollable data pollutant, so part of the initial effort is devoted to determining their effect and the construction of a model to help correct or justifiably ignore affected data. Other short range objectives are to identify and verify measurements giving results of importance to land managers. Lake-counting is a prominent example. Open water is easily detected in band 7 data with some support from either band 4 or band 5 to remove ambiguities. Land managers and conservationists commission studies periodically to measure water bodies and total water count within specified areas.

Zirkle, R. E.↗
NASA NTRS1973

Management of natural resources through automatic cartographic inventory

The author has identified the following significant results. Over those parts of the ARNICA test site where ERTS-1 data were available, the search for correspondences between images and ground truth acquired by the vegetation and geology maps was quite positive. The probability of recognition of soil use types can be estimated at: (1) 100% for water plans, rivers, canals, swamplands, and wetlands; (2) 80%-100% for the major types of forestry, farmland zones, moorlands and pasturelands, and urbanization; (3) 20%-50% for communication lines; (4) 60%-80% for forestry species and organization of agricultural areas; (5) 40%-60% for finer discrimination between forest types and more accurate identification of cultivations; (6) 60%-90% for major geological features. These percentages will be improved upon as soon as it is possible to use the repetitive imagery. An early use of automatic cartography using ERTS-1 imagery was made possible for pine forests in the Central Pyrenees, the densitometric signature of which were particularly significant. Important observations were made in related fields of water resources, snow survey, estuary dynamics, and meteorology.

Rey, P.↗
NASA NTRS1973

Automatic equalization using the discrete frequency domain.

A new mean-square-error automatic equalizer for synchronous data transmission is developed. It utilizes Rosen's gradient-projection method to optimize parameters in the discrete frequency domain. The algorithm converges (in the mean) for any channel even in the presence of noise. It is shown that for the channels considered, convergence is faster (in a bounded sense) than for comparable time-domain equalizers.

Walzman, T.↗
NASA NTRS1972

Automatic surface inoculation of agar trays.

Description of a machine and technique for the automatic inoculation of a plastic tray containing agar media with a culture, using either a conventional inoculation loop or a cotton swab. The design of the machine is simple, it is easy to use, and it relieves the operator from the manual task of streaking cultures. The described technique makes possible the visualization of the overall qualitative and, to some extent, quantitative relationships of various bacterial types in a sample tested.

Wilkins, J. R.↗
NASA NTRS1972

Automatic microscopy for mitotic cell location.

Advances are reported in the development of an automatic microscope with which to locate hematologic or other cells in mitosis for subsequent chromosome analysis. The system under development is designed to perform the functions of: slide scanning to locate metaphase cells; conversion of images of selected cells into binary form; and on-line computer analysis of the digitized image for significant cytogenetic data. Cell detection criteria are evaluated using a test sample of 100 mitotic cells and 100 artifacts.

Herron, J.↗
NASA NTRS1973

A closed-loop automatic control system for high-intensity acoustic test systems.

Description of an automatic control system for high-intensity acoustic tests in reverberation chambers. Working in 14 one-third-octave bands from 50 to 1000 Hz, the desired sound pressure levels are set into the memory in the control system before the test. The control system then increases the sound pressure level in the reverberation chamber gradually in each of the one-third-octave bands until the level set in the memory is reached. This level is then maintained for the duration of the test. Additional features of the system are overtest protection, the capability of 'holding' the spectrum at any time, and the presence of a total test timer.

Slusser, R. A.↗
NASA NTRS1973

An approach to the synthesis of separate surface automatic flight control systems.

A method is presented for the analysis of separate surface automatic flight control systems. The feasibility of such systems is demonstrated by the analysis of an example system, a separate surface wing-leveler for a Cessna 172. This example system employs a separate surface aileron with 15% of the basic airplane roll control power. A 90% reduction in bank-angle gust response can be obtained when compared with the basic airplane. The system does not feed back to the pilot's wheel. When failed (even hardover) the pilot retains more than adequate control of the airplane.

Roskam, J.↗
NASA NTRS1973

Automatic control of the Skylab Astronaut Maneuvering Research Vehicle.

The two automatic control modes of the Astronaut Maneuvering Research Vehicle (AMRV) are analyzed: the control moment gyro (CMG) and the rate gyro (RG). The AMRV is an autonomous maneuvering unit which translates and rotates the pilot by means of hand-controller input commands. The CMG normal operation, desaturation, and cage/lock dynamics are described in terms of a realistic AMRV mass property configuration. No propellant is used for normal operation in the CMG mode, and the maximum rotation rate is 5 deg/sec about each AMRV axis. The RG attitude maneuvering and limit cycle submode dynamic are described in terms of the same AMRV mass property configuration.

Murtagh, T. B.↗
NASA NTRS1974

Automatic marker for photographic film

Commercially-produced wire-marking machine is modified to title or mark film rolls automatically. Machine is used with film drive mechanism which is powered with variable-speed, 28-volt dc motor. Up to 40 frames per minute can be marked, reducing time and cost of process.

Gabbard, N. M.↗
NASA NTRS1974

Automatic soldering machine

Fully-automatic tube-joint soldering machine can be used to make leakproof joints in aluminum tubes of 3/16 to 2 in. in diameter. Machine consists of temperature-control unit, heater transformer and heater head, vibrator, and associated circuitry controls, and indicators.

Stein, J. A.↗