Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Depletion layer recombination effects on the radiation damage hardness of gallium arsenide cells

The significant effect of junction depletion layer recombination on the efficiency of windowed GaAs cells was demonstrated. The effect becomes more pronounced as radiation damage occurs. The depletion is considered for 1 MeV electron fluences up to 10 to the 16th power e/sq m. The cell modeling separates damage in emitter and base or buffer layers using different damage coefficients is reported. The lower coefficient for the emitter predicts less loss of performance at fluences greater than 10 to the 15th power e/sq cm. A method for obtaining information on junction recombination effects as damage proceeds is described; this enables a more complete diagnosis of damage to be made.

Garlick, G. F. J.↗

Atom-probe tomographic study of interfaces of Cu{sub 2}ZnSnS{sub 4} photovoltaic cells

The heterophase interfaces between the CdS buffer layer and the Cu{sub 2}ZnSnS{sub 4} (CZTS) absorption layers are one of the main factors affecting photovoltaic performance of CZTS cells. We have studied the compositional distributions at heterophase interfaces in CZTS cells using three-dimensional atom-probe tomography. The results demonstrate: (a) diffusion of Cd into the CZTS layer; (b) segregation of Zn at the CdS/CZTS interface; and (c) a change of oxygen and hydrogen concentrations in the CdS layer depending on the heat treatment. Annealing at 573 K after deposition of CdS improves the photovoltaic properties of CZTS cells probably because of the formation of a heterophase epitaxial junction at the CdS/CZTS interface. Conversely, segregation of Zn at the CdS/CZTS interface after annealing at a higher temperature deteriorates the photovoltaic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molybdenum Disulfide Catalytic Coatings via Atomic Layer Deposition for Solar Hydrogen Production from Copper Gallium Diselenide Photocathodes

Here, we show that applying atomic layer deposition-derived molybdenum disulfide (MoS 2 ) catalytic coatings on copper gallium diselenide (CGSe) thin film absorbers can lead to efficient wide band gap photocathodes for photoelectrochemical hydrogen production. We have prepared a device that is free of precious metals, employing a CGSe absorber and a cadmium sulfide (CdS) buffer layer, a titanium dioxide (TiO 2 ) interfacial layer, and a MoS 2 catalytic layer. The resulting MoS 2 /TiO 2 /CdS/CGSe photocathode exhibits a photocurrent onset of +0.53 V vs. RHE and a saturation photocurrent density of -10 mA cm -2 , with stable operation for greater than 5 hours in acidic electrolyte. Spectroscopic exploration of this device architecture indicate that overlayer degradation occurs inhomogeneously, ultimately exposing the underlying CGSe absorber.

08 HYDROGEN↗

Band energy control of molybdenum oxide by surface hydration

The application of oxide buffer layers for improved carrier extraction is ubiquitous in organic electronics. However, the performance is highly susceptible to processing conditions. Notably, the interface stability and electronic structure is extremely sensitive to the uptake of ambient water. In this study we use density functional theory calculations to asses the effects of adsorbed water on the electronic structure of MoO{sub x}, in the context of polymer-fullerene solar cells based on PCDTBT. We obtain excellent agreement with experimental values of the ionization potential for pristine MoO{sub 3} (010). We find that IP and EA values can vary by as much as 2.5 eV depending on the oxidation state of the surface and that adsorbed water can either increase or decrease the IP and EA depending on the concentration of surface water.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Buffer-eliminated, charge-neutral epitaxial graphene on oxidized 4H-SiC (0001) surface

Buffer-eliminated, charge-neutral epitaxial graphene (EG) is important to enhance its potential in device applications. Using the first principles Density Functional Theory calculations, we investigated the effect of oxidation on the electronic and structural properties of EG on 4H-SiC (0001) surface. Our investigation reveals that the buffer layer decouples from the substrate in the presence of both silicate and silicon oxy-nitride at the interface, and the resultant monolayer EG is charge-neutral in both cases. The interface at 4H-SiC/silicate/EG is characterized by surface dangling electrons, which opens up another route for further engineering EG on 4H-SiC. Dangling electron-free 4H-SiC/silicon oxy-nitride/EG is ideal for achieving charge-neutral EG.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultrathin VO 2 Films on Functional Substrates

The metal–insulator transition (MIT) in vanadium dioxide (VO 2 ) thin films is strongly affected by grain size, thickness, and interfacial properties. Typically, a minimum thickness around 50 nm is required for VO 2 to exhibit a significant MIT when functional substrates like sapphire and silicon are used. Several works have shown that thin films below 20 nm, with up to 2–3 decades of change in the resistance across the MIT, can be achieved but require complex pre- or postprocessing of the samples. We show that predeposition substrate condition control facilitates the direct growth of VO 2 ultrathin 15 nm films, exhibiting a resistance change between 3 and 4 decades across the MIT. Our findings indicate that the interface between the film and the substrate is crucial in determining the initial growth layers and the structural evolution. With appropriate substrate surface treatment, the desired VO 2 MIT can be enhanced regardless of the substrate crystallographic orientation. Moreover, we propose a novel approach to obtain large resistance changes across the MIT in ultrathin VO 2 films by incorporating a predeposited 1.5 nm vanadium oxide buffer layer, thereby eliminating the need to use different materials or complex pre- or postprocessing of the samples. Here we also demonstrate that this method improves the transition of 25–50 nm VO 2 thin films on silicon substrates. Our study reveals a simple approach for direct growth of ultrathin VO 2 films exhibiting a significant MIT, which is commonly accepted unattainable over substrates of technological importance, such as sapphire and silicon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of Fission Product Interaction with the SiC Containment Layer of High Turnup TRISO Fuel Particles

Tri-structural Isotropic (TRISO) encapsulated fuel particles are used in high-temperature gas-cooled nuclear reactors. Fuel performance is limited by the propensity of metallic fission products to be released under high temperature testing to simulate hypothesized accident scenarios. The current particle design consists of a 350 μm or 425 μm UO{sub 2} or UCO fuel kernel surrounded by a 100μm porous carbon buffer layer, a 40μm inner pyrolytic carbon (IPyC) layer, a 35μm high-density silicon carbide (SiC) layer, and a 40μm outer pyrolytic carbon (OPyC) layer. Of interest is the fission product interaction with the SiC layer, which provides the most structural support and is the main barrier to the diffusion of fission products. Previous laboratory examination studies have indicated the release of Ag through seemingly intact particles and the localized corrosion of the SiC due to Pd. Although a number of studies have been conducted, the specifics of both the Ag and Pd reaction mechanisms, in addition to U and Pu, through SiC are currently not well understood. This work aims to understand the pathways and kinetics of these interactions under normal operation as well as accident conditions. In order to improve our understanding of this, we have the unique opportunity to examine irradiated TRISO particles to study post-irradiation effects on these materials. Experimental data is necessary to constrain the current models used to predict the behavior of fission products in the SiC layer of TRISO fuels. This work aims to understand the interaction of fission products with the SiC containment layer in TRISO particles. We have systematically examined three SiC shells from irradiated TRISO particles using XAFS, TEM, and EDS. Results indicate the formation of palladium silicides, and uranium and plutonium carbides. Additionally, silver is seen to be metallic. Preliminary microscopy results indicate fission products throughout the SiC layer of the TRISO particles, and microstructural changes have been observed between the as-irradiated and safety tested particles. These results have provided key information on the fission product transport behavior through irradiated SiC at varying temperatures. Knowledge of these reaction pathways will allow for better simulation of the long-term behavior of TRISO fuels. They may also suggest ways to modify the SiC layer to improve fuel performance and mitigate fission product release, which is critical for safety strategies required to commercialize these nuclear fuel technologies. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Epitaxial growth and electronic properties of mixed valence YbAl{sub 3} thin films

We report the growth of thin films of the mixed valence compound YbAl{sub 3} on MgO using molecular-beam epitaxy. Employing an aluminum buffer layer, epitaxial (001) films can be grown with sub-nm surface roughness. Using x-ray diffraction, in situ low-energy electron diffraction, and aberration-corrected scanning transmission electron microscopy, we establish that the films are ordered in the bulk as well as at the surface. Our films show a coherence temperature of 37 K, comparable to that reported for bulk single crystals. Photoelectron spectroscopy reveals contributions from both f{sup 13} and f{sup 12} final states establishing that YbAl{sub 3} is a mixed valence compound and shows the presence of a Kondo Resonance peak near the Fermi-level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and properties of crystalline barium oxide on the GaAs(100) substrate

Growing a crystalline oxide film on III-V semiconductor renders possible approaches to improve operation of electronics and optoelectronics heterostructures such as oxide/semiconductor junctions for transistors and window layers for solar cells. We demonstrate the growth of crystalline barium oxide (BaO) on GaAs(100) at low temperatures, even down to room temperature. Photoluminescence (PL) measurements reveal that the amount of interface defects is reduced for BaO/GaAs, compared to Al{sub 2}O{sub 3}/GaAs, suggesting that BaO is a useful buffer layer to passivate the surface of the III-V device material. PL and photoemission data show that the produced junction tolerates the post heating around 600 °C.

36 MATERIALS SCIENCE↗

Role of Amorphous Silicon and Tunneling in Heterojunction with Intrinsic Thin Layer (HIT) Solar Cells

This work analyzes heterojunction with intrinsic thin layer (HIT) solar cells using numerical simulations. The differences between the device physics of cells with p- and n-type crystalline silicon (c-Si) wafers are substantial. HIT solar cells with n-type wafers essentially form a n/p/n structure, where tunneling across the junction heterointerfaces is a critical transport mechanism required to attain performance exceeding 20%. For HIT cells with p-type wafers, only tunneling at the back-contact barrier may be important. For p-wafer cells, the hydrogenated amorphous silicon (a-Si:H) between the indium tin oxide (ITO) and crystalline silicon may act as a passivating buffer layer but, otherwise, does not significantly contribute to device performance. For n-wafer cells, the carrier concentration and band alignment of this a-Si:H layer are critical to device performance.

14 SOLAR ENERGY↗

Synthesis of superconducting freestanding infinite-layer nickelate heterostructures on the millimetre scale

The development of superconductivity in infinite-layer nickelates through hole-doping relies on the controlled synthesis of Ni in a high oxidation state, followed by topotactic reduction to a very low oxidation state. So far, superconductivity has been realized only in epitaxial thin films. Here, in this work, we integrate these techniques with heterostructures that include an epitaxial soluble buffer layer, enabling the release of freestanding (Nd,Sr)NiO 2 heterostructures. The released heterostructures exhibit comparable structural and electronic properties to those of optimized thin films, with lateral dimensions ranging from millimetres to ~100 μm, depending on the degree of strain released with respect to the initial substrate. The changes in the superconducting transition temperature upon release of the heterostructure mirror those reported for variations in substrate and pressure, suggesting a common underlying response to strain in the infinite-layer nickelate superconductivity. These freestanding structures will facilitate a range of experimental studies without the constraints of substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Final Report on CRADA ORNL05-0703

The work of this CRADA has been focused on the development of Rolling-Assisted Biaxially Textured Substrate (RABiTS)-based high-temperature superconducting (HTS) coated conductor technology that is in the pre-commercial development stage. Metal-Oxide Technologies, Inc. (MetOx) is a Houston-based small business that is developing and manufacturing second-generation (2G) HTS wire using an all-Metallo-Organic Chemical Vapor Deposition (MOCVD) process, including the buffer layers and HTS coating. Advances toward commercialization were enabled by coordinated interactions that facilitated the synthesis, characterization, and iterative optimization of prototype 2G wire segments.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Magnetic properties and interlayer coupling of epitaxial Co/Cu films on Si

Thin films of Co and Co/Cu/Co trilayers with wedged Cu interlayers were grown epitaxially on Cu buffer layers on hydrogen passivated Si(001) wafers. We find that single Co layers have a well-defined four-fold anisotropy but with smaller in-plane anisotropies than observed in Co grown on Cu crystals. Ruderman–Kittel–Kasuya–Yosida (RKKY) interlayer coupling is observed in one Co/Cu/Co sample which is the smoothest of the films as measured by atomic force microscopy. Some of the films also form a dot-like structure on the surface. Intermixing at elevated temperatures between the Cu buffer and Si limits the ability to form flat surfaces to promote RKKY coupling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Opportunities for Improving Photovoltaic Performance with Better Transparent Contacts

NREL and DOE recently held a workshop to assess the challenges, opportunities and potential impacts for improved transparent contacts (TCs) to positively impact current and emerging photovoltaic conversion technologies. Here, we report on the workshop outcomes based on the collective input and participation from industry, academia, national laboratories and DOE. A primary conclusion is that new emerging materials can have significant impacts on the overall performance, reliability and cost for commercial scale PV. One key observation is that TC's should no longer be thought of as a single-layer single-purpose material but as an integrated contact layer stack that includes a charge selective interface layer, a conducting layer and sometimes layers for reliability or light management. In addition, the long standing goal of developing of high performance atmospheric-pressure-processed TCs has finally been met by the rapidly improving Ag nanowire based composites with better than ITO performance from an all ink based process. Even the more conventional metal oxide materials are improving rapidly by introducing solution processed buffer layers, and even conductor layers. This rapid evolution has opened the way to high-throughput low-cost TC processing. Key desired metrics for TCs and approaches to achieving them are discussed.

14 SOLAR ENERGY↗

Spin-splitting in p-type Ge devices

Compressively strained Ge quantum well devices have a spin-splitting in applied magnetic field that is entirely consistent with a Zeeman effect in the heavy hole valence band. The spin orientation is determined by the biaxial strain in the quantum well with the relaxed SiGe buffer layers and is quantized in the growth direction perpendicular to the conducting channel. The measured spin-splitting in the resistivity ρ{sub xx} agrees with the predictions of the Zeeman Hamiltonian where the Shubnikov-deHaas effect exhibits a loss of even filling factor minima in the resistivity ρ{sub xx} with hole depletion from a gate field, increasing disorder or increasing temperature. There is no measurable Rashba spin-orbit coupling irrespective of the structural inversion asymmetry of the confining potential in low p-doped or undoped Ge quantum wells from a density of 6 × 10{sup 10} cm{sup −2} in depletion mode to 1.7 × 10{sup 11} cm{sup −2} in enhancement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In-plane dielectric properties of epitaxial Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} thin films grown on GaAs for tunable device application

We have epitaxially deposited ferroelectric Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} (BST) thin films grown on GaAs substrate via SrTiO{sub 3} buffer layer by laser molecular beam epitaxy. Structural characteristics of the heterostructure were measured by various techniques. The in-plane dielectric properties of the heteroepitaxial structure under different applying frequency were investigated from -190 to 90 Degree-Sign C, indicating Curie temperature of the BST film to be around 52 Degree-Sign C. At room temperature, the dielectric constant of the heterostructure under moderate dc bias field can be tuned by more than 30% and K factor used for frequency agile materials is found to be close to 8. Our results offer the possibility to combine frequency agile electronics of ferroelectric titanate with the high-performance microwave capabilities of GaAs for room temperature tunable device application.

36 MATERIALS SCIENCE↗

Effect of Dy/Nd double layer on coercivity in Nd-Fe-B thin films

The Nd-Fe-B (t{sub NFB} = 30 nm)/[Dy (t{sub Dy} nm)/Nd (t{sub Nd} nm)] (t{sub Dy/Nd} = 20 nm) (thickness t{sub Dy} = 0–10 nm) thin films were deposited on Al{sub 2}O{sub 3}(0001) substrate and subsequently in-situ annealed at 470 °C. As-deposited Nd-Fe-B thin films with a highly perpendicular orientation of c-axis were deposited by introducing bcc-Mo(111) single crystal buffer layer. After post-annealing, the grain size of the Nd-Fe-B/Dy/Nd thin films with the t{sub Dy} = 10 nm and t{sub Nd} = 10 nm becomes large due to the Dy and the Nd atoms thermal diffusion, while DyFe{sub 2} and Dy oxide compounds are formed in Nd-Fe-B layers, which is confirmed by means of a combination of atomic force microscopy observation and X-ray diffraction measurement. The H{sub c} of Nd-Fe-B/Dy/Nd thin films with the t{sub Dy} = 10 nm and t{sub Nd} = 10 nm was approximately the same value of the Nd-Fe-B thin films without Dy/Nd double layer annealed at 470 °C. On the other hand, H{sub c} is enhanced to be about 22.1 kOe in the annealed Nd-Fe-B/Dy/Nd films with the t{sub Dy} = 0.8 nm and t{sub Nd} = 19.2 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of interfacial layer on the crystal structure of InAs/AlAs{sub 0.16}Sb{sub 0.84}/AlSb quantum wells

Ion channeling technique using MeV C{sup 2+} ions and high resolution X-ray diffraction were used to study the crystal quality of an InAs/AlSb-based quantum wells. We found that the InAs quality has a strong dependence on the type of the interface used. With the addition of the InSb-like interface, the crystal quality of the InAs channel was greatly improved. The InAs lattice was fully strained and aligned with the lattice of the buffer layer without any lattice relaxation. On the other hand, if the interface was of the AlAs type, the lattice of the InAs quantum well was relaxed and the crystal quality was poor. This explains why a superior InAs quantum well with high electron mobility and good surface morphology can be achieved with the use of the InSb interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗