Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

SiO 2 -Enhanced Structural Stability and Strong Adhesion with a New Binder of Konjac Glucomannan Enables Stable Cycling of Silicon Anodes for Lithium-Ion Batteries

Silicon-based anodes with high theoretical capacity have intriguing potential applications for next-generation high-energy lithium-ion batteries, but suffer from huge volumetric change that causes pulverization of electrodes. Rational design and construction of effective electrode structures combined with versatile binders remain a significant challenge. In this paper, a unique natural binder of konjac glucomannan (KGM) is developed and an amorphous protective layer of SiO 2 is fabricated on the surface of Si nanoparticles (Si@SiO 2 ) to enhance the adhesion. Benefiting from a plethora of hydroxyl groups, the KGM binder with inherently high adhesion and superior mechanical properties provides abundant contact sites to active materials. Molecular mechanics simulations and experimental results demonstrate that the enhanced adhesion between KGM and Si@SiO 2 can bond the particles tightly to form a robust electrode. In addition to bridging KGM molecules, the SiO 2 -functionalized surface may serve as a buffer layer to alleviate the stresses of Si nanoparticles resulting from the volume change. The as-fabricated KGM/Si@SiO 2 electrode exhibits outstanding structural stability upon long-term cycles. Finally, a highly reversible capacity of 1278 mAh g -1 can be achieved over 1000 cycles at a current density of 2 A g -1 , and the capacity decay is as small as 0.056% per cycle.

25 ENERGY STORAGE↗

The Study of Energy Band Gap of Al{sub x}In{sub y}Ga{sub 1-x-y}N Quaternary Alloys Using UV-VIS Spectroscopy

Optical characterizations have been performed on high-quality quaternary Al{sub x}In{sub y}Ga{sub 1-x-y}N thin films using UV-VIS spectroscopy at room temperature. The Al{sub x}In{sub y}Ga{sub 1-x-y}N films were grown on c-plane (0001) sapphire substrates with AlN as buffer layers using molecular beam epitaxy (MBE) technique with aluminum (Al) mole fraction x ranging from 0.0 to 0.2 and constant indium (In) mole fraction y = 0.1. The UV-VIS measurements indicated that the energy band gap of the quaternary films increases with increasing Al composition from 0.05 to 0.2. This trend is expected since the incorporation of Al increases the energy band gap of ternary In0.1Ga0.90N (3.004eV). We have also investigated the bowing parameter of the variation of energy band gaps and found it to be very sensitive on Al content. A value of b=7 eV has been obtained for our quaternary Al{sub x}In{sub y}Ga{sub 1-x-y}N alloys.

36 MATERIALS SCIENCE↗

High-performance metamorphic InGaAs resonant cavity enhanced photodetector grown on GaAs substrate

In this letter, we demonstrated a top illuminated 1.55 {mu}m metamorphic InGaAs resonant-cavity-enhanced p-i-n photodetector grown on GaAs substrate. The photodetectors were grown by a solid-source molecular beam epitaxy system. The high quality linearly graded In{sub x}Al{sub 0.4}Ga{sub 1-x-0.4}As metamorphic buffer layer enabled photodiodes to achieve ultralow dark current densities of 2.3x10{sup -6} A/cm{sup 2} at 0 V and 4.2x10{sup -5} A/cm{sup 2} at a reverse bias of 5 V. A high quantum efficiency of 84.4% at resonant wavelength of 1542 nm, a full width at half maximum about 14 nm, and a -3 dB bandwidth up to 13 GHz were also obtained.

36 MATERIALS SCIENCE↗

Epitaxial integration of ferromagnetic correlated oxide LaCoO{sub 3} with Si (100)

We have grown epitaxial strained LaCoO{sub 3} on (100)-oriented silicon by molecular beam epitaxy using a relaxed epitaxial SrTiO{sub 3} buffer layer. Superconducting quantum interference device magnetization measurements show that, unlike the bulk material, the ground state of the strained LaCoO{sub 3} on silicon is ferromagnetic with a T{sub C} of 85 K. First principles calculations suggest that a ferromagnetic ground state can be stabilized in LaCoO{sub 3} by a sufficiently large biaxial tensile strain with the transition accompanied by a partial untilting of the CoO{sub 6} octahedra.

36 MATERIALS SCIENCE↗

Nanoscale calibration of n-type ZnO staircase structures by scanning capacitance microscopy

Cross-sectional scanning capacitance microscopy (SCM) was performed on n-type ZnO multi-layer structures homoepitaxially grown by molecular beam epitaxy method. Highly contrasted SCM signals were obtained between the ZnO layers with different Ga densities. Through comparison with dopant depth profiles from secondary ion mass spectroscopy measurement, it is demonstrated that SCM is able to distinguish carrier concentrations at all levels of the samples (from 2 × 10{sup 17 }cm{sup −3} to 3 × 10{sup 20 }cm{sup −3}). The good agreement of the results from the two techniques indicates that SCM can be a useful tool for two dimensional carrier profiling at nanoscale for ZnO nanostructure development. As an example, residual carrier concentration inside the non-intentionally doped buffer layer was estimated to be around 2 × 10{sup 16 }cm{sup −3} through calibration analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nondestructive depth-resolved spectroscopic investigation of the heavily intermixed In2S3/Cu(In,Ga)Se2 interface

The chemical structure of the interface between a nominal In2S3 buffer and a Cu(In,Ga)Se2 (CIGSe) thin-film solar cell absorber was investigated by soft x-ray photoelectron and emission spectroscopy. We find a heavily intermixed, complex interface structure, in which Cu diffuses into (and Na through) the buffer layer, while the CIGSe absorber surface/interface region is partially sulfurized. Based on our spectroscopic analysis, a comprehensive picture of the chemical interface structure is proposed.

14 SOLAR ENERGY↗

Atomic layer deposition of Al-incorporated Zn(O,S) thin films with tunable electrical properties

Zinc oxysulfide, Zn(O,S), films grown by atomic layer deposition were incorporated with aluminum to adjust the carrier concentration. The electron carrier concentration increased up to one order of magnitude from 10{sup 19} to 10{sup 20} cm{sup −3} with aluminum incorporation and sulfur content in the range of 0 ≤ S/(Zn+Al) ≤ 0.16. However, the carrier concentration decreased by five orders of magnitude from 10{sup 19} to 10{sup 14} cm{sup −3} for S/(Zn+Al) = 0.34 and decreased even further when S/(Zn+Al) > 0.34. Such tunable electrical properties are potentially useful for graded buffer layers in thin-film photovoltaic applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomic‐Scale Mechanisms of Nucleation and Stabilization in CuCrO 2 and CuFeO 2 Delafossite Thin Films on Al 2 O 3

Abstract Delafossite thin films exhibit a range of intriguing physical properties derived from their layered structure, which consists of alternating noble metal ( A + ) and ( B O 2 − ) sublayers in an AB O 2 stoichiometry. The integration of these properties into functional devices requires the successful epitaxial growth of delafossites as thin films on appropriate substrates. Unfortunately, their unique lattice geometry complicates growth, as different delafossites display variable behavior on the same substrate, often unrelated to lattice mismatch. This suggests the presence of yet unidentified stabilization mechanisms that enable the selective growth of certain delafossites, allowing them to be grown either as films themselves or to be used as buffer layers for subsequent deposition. In this study, advanced scanning transmission electron microscopy (STEM) is employed to investigate the nucleation mechanisms governing the stable growth of Cu‐based delafossites on Al 2 O 3 , specifically CuCrO 2 and CuFeO 2 thin films synthesized via molecular‐beam epitaxy. These findings reveal that a combination of a misfit dislocation network at the interface and monolayer‐deep chemical intermixing effectively relieves lattice mismatch strain. This mechanism, which differs fundamentally from that observed in Pd‐based delafossites, provides key insights into the controlled epitaxy of delafossite materials.

Scheid, Anna [Max Planck Institute for Solid State↗

Strain-relaxed tetragonal MAPbI 3 results in efficient mesoporous solar cells

In mesoporous organo-halide perovskite solar cells, the coexistence of tetragonal phase and cubic phase in the perovskite layer is found to result in strained crystal structure at the mesoporous TiO 2 (mp-TiO 2 )/perovskite heterointerface. This results in structural defects pinholes, grain boundaries, and interfacial porosity which is detrimental towards photovoltaic performance and device stability. The strain at the interface originates from the lattice mismatch between the mp-TiO 2 nanoparticles (NPs) and perovskite. Here, a transformative approach is demonstrated to realize relaxed and high purity tetragonal phase MAPbI 3 (RP) near the mp-TiO 2 interface region. This approach involves inserting a ~2 nm lattice matched buffer layer of cubic CsPbBr 3 between mp-TiO 2 NPs and MAPbI 3 , which serves as a template for epitaxial growth for top MAPbI 3 . As a result, the solar cell with relaxed MAPbI3 shows a power conversion efficiency (PCE) of 22.12% with significantly enhanced environmental, light, and thermal stability.

14 SOLAR ENERGY↗

Materials for controlling the epitaxial growth of photoactive layers in photovoltaic devices

There is disclosed ultrathin film material templating layers that force the morphology of subsequently grown electrically active thin films have been found to increase the performance of small molecule organic photovoltaic (OPV) cells. There is disclosed electron-transporting material, such as hexaazatriphenylene-hexacarbonitrile (HAT-CN) can be used as a templating material that forces donor materials, such as copper phthalocyanine (CuPc) to assume a vertical-standing morphology when deposited onto its surface on an electrode, such as an indium tin oxide (ITO) electrode. It has been shown that for a device with HAT-CN as the templating buffer layer, the fill factor and short circuit current of CuPc:C60 OPVs were both improved compared with cells lacking the HAT-CN template. This is explained by the reduction of the series resistance due to the improved crystallinity of CuPc grown onto the ITO surface.

Forrest, Stephen R.↗

High Performance SOFCs with a Superior Stability for Reliable and Durable Power Systems

Next generation of fuel cells, electrolyzers, and batteries requires higher power, faster kinetics, and larger energy density, which necessitate the use of compositionally complex oxides to achieve multifunctionalities and activity. These compositionally complex oxides may change their phases and structures during an electrochemical process – a so-called “electrochemically driven phase transformation”. The origin for such a phase change has remained obscure. More importantly, there is a need to develop high performance solid oxide fuel cells with an enhanced stability. In this work, the La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) cathode surface is modified by infiltration of Pr 6 O 11 and the power density at 0.8V and 750 °C is improved by 21%. In addition, by replacing the traditional barrier layer Gd 0.2 Ce 0.8 O 1.9 with mixed conducting Pr 0.1 Gd 0.1 Ce 0.8 O 1.9 , the power density increases by 38%. The different mechanism of promotions was investigated by electrochemical impedance spectroscopy. The ohmic resistance is dramatically reduced by applying the PGCO interlayer, and the distribution of relaxation time was used to analyze the mechanism for which the polarization resistance was decreased attributing to the mixed conduction nature in PrO x . An increase of power density at 0.8 V of 0.358 W/cm 2 (71%) is achieved with the implementation of both surface modification and buffer layer engineering. An experimental study and a theoretical analysis were then carried out on phase evolution in praseodymium nickelates. Nickelate-based electrodes show up to 60× greater phase transformation during operation when compared to thermally annealed ones. Theoretical analysis suggests that the presence of a reduced oxygen partial pressure at the interface between the oxygen electrode and the electrolyte is the origin for the phase change in an oxygen electrode. Guided by the theory, an addition of the electronic conduction in the interface layer leads to the significant suppression of phase change, while improving cell performance and performance stability. When an oxygen electrode is under polarization, the oxygen partial pressure at the interface between the oxygen electrode and the electrolyte is lower than that of incoming oxidant. Under a high polarization, the environment at the aforementioned interface may lead to phase transformation of the oxygen electrode. The local oxygen partial pressure is determined by the transport properties at the interfaces. An addition of the electronic conduction in the interface layer, for instance using (Pr,Gd)-doped ceria to replace Gd-doped ceria, results in improved cell performance and performance stability, while the phase transformation is significantly suppressed. This work provides a fundamental understanding of the origin for phase transformation in oxygen electrodes during operation and use this knowledge to develop a high-performance electrode that exhibits improved performance stability.

30 DIRECT ENERGY CONVERSION↗

Understanding Photovoltage Deficits in Electrochemically Grown Tin Sulfide (SnS) Thin-Film Photovoltaic Devices

Tin­(II) sulfide (SnS) is an earth-abundant semiconductor with a direct optical bandgap of ca. 1.1 eV, which makes it a promising absorber material for thin-film photovoltaic (PV) devices. However, existing devices have significant photovoltage deficits, which may be related to the anisotropic structure of the layered Herzenbergite SnS crystal structure. Here, we explore electrochemical deposition as a near room temperature path to oriented SnS crystal films on Mo and FTO substrates and employ vibrating Kelvin probe surface photovoltage (SPV) spectroscopy and J–V measurements to identify conversion losses in them. According to grazing-incidence X-ray diffraction and SEM, the SnS films consist of crystalline microplates with preferred orientation in the [111] and [001] directions. The bare SnS films produce only small and irreversible surface photovoltage signals, due charge trapping and recombination at the SnS surfaces, but addition of a CdS buffer layer lowers the charge recombination rate by 2 orders of magnitude and increases both the photovoltage and its reversibility due to the formation of a p-SnS/n-CdS junction. According to SPV, the FTO/SnS back interface (but not the Mo/SnS interface) forms a detrimental p–n junction that hinders hole transfer. Additional shunting through the relatively open microcrystal SnS layers and a lower conductivity of the FTO substrate explain the low power conversion efficiencies of the final devices (0.18 and 0.10% for the Mo and FTO substrates). Altogether, this work establishes a low-temperature path for the fabrication of crystalline SnS film-based solar cells and identifies the bottlenecks that limit high photoconversion efficiency.

deposition↗

Emission properties of InGaAs/GaAs heterostructures with quantum wells and dots after irradiation with neutrons

The effect of neutron radiation on the luminescence of InGaAs/GaAs heterostructures with quantum wells and quantum dots is studied. It is found that neutron radiation results both in the formation of defects and in the radiation-induced annealing of growth-related defects. Quantum dots are more stable to neutron radiation in comparison with quantum wells. It is shown that the layer of InGaAs/GaAs quantum dots located near the surface is less sensitive to irradiation with neutrons compared with a similar layer located in the bulk. In the first case, one can observe an increase in the photoluminescence and electroluminescence intensities after irradiation with neutrons, which is related to the effects of radiation-induced annealing. The pronounced effect of elastic strains in the InGaAs/GaAs quantum wells on the extent of quenching of the photoluminescence intensity upon irradiation with neutrons is revealed. In heterostructures with quantum wells, the effect of radiation-induced annealing manifests itself in a shift of the photoluminescence peak to longer wavelengths as a result of a decrease in elastic strains upon irradiation with neutrons. Doping of the GaAs buffer layer with silicon also reduces the value of this spectral shift.

36 MATERIALS SCIENCE↗

Amorphous indium-gallium-zinc-oxide as electron transport layer in organic photodetectors

Amorphous indium-gallium-zinc-oxide (a-IGZO) is demonstrated as an electron transport layer (ETL) in a high-performance organic photodetector (OPD). Dark current in the range of 10 nA/cm{sup 2} at a bias voltage of −2 V and a high photoresponse in the visible spectrum were obtained in inverted OPDs with poly(3-hexylthiophene) and phenyl-C{sub 61}-butyric acid methyl ester active layer. The best results were obtained for the optimum a-IGZO thickness of 7.5 nm with specific detectivity of 3 × 10{sup 12} Jones at the wavelength of 550 nm. The performance of the best OPD devices using a-IGZO was shown to be comparable to state-of-the-art devices based on TiO{sub x} as ETL, with higher rectification achieved in reverse bias. Yield and reproducibility were also enhanced with a-IGZO, facilitating fabrication of large area OPDs. Furthermore, easier integration with IGZO-based readout backplanes can be envisioned, where the channel material can be used as photodiode buffer layer after additional treatment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Two-Step Absorber Deposition Approach To Overcome Shunt Losses in Thin-Film Solar Cells: Using Tin Sulfide as a Proof-of-Concept Material System

As novel absorber materials are developed and screened for their photovoltaic (PV) properties, the challenge remains to reproducibly test promising candidates for high-performing PV devices. Many early-stage devices are prone to device shunting due to pinholes in the absorber layer, producing “false-negative” results. We demonstrate a device engineering solution toward a robust device architecture, using a two-step absorber deposition approach. We use tin sulfide (SnS) as a test absorber material. The SnS bulk is processed at high temperature (400 °C) to stimulate grain growth, followed by a much thinner, low-temperature (200 °C) absorber deposition. At a lower process temperature, the thin absorber overlayer contains significantly smaller, densely packed grains, which are likely to provide a continuous coating and fill pinholes in the underlying absorber bulk. We compare this two-step approach to the more standard approach of using a semi-insulating buffer layer directly on top of the annealed absorber bulk, and we demonstrate a more than 3.5× superior shunt resistance R sh with smaller standard error σ Rsh . Electron-beam-induced current (EBIC) measurements indicate a lower density of pinholes in the SnS absorber bulk when using the two-step absorber deposition approach. We correlate those findings to improvements in the device performance and device performance reproducibility.

14 SOLAR ENERGY↗

Atomic layer deposition of zinc sulfide with Zn(TMHD){sub 2}

The atomic layer deposition (ALD) of ZnS films with Zn(TMHD){sub 2} and in situ generated H{sub 2}S as precursors was investigated, over a temperature range of 150-375 Degree-Sign C. ALD behavior was confirmed by investigation of growth behavior and saturation curves. The properties of the films were studied with atomic force microscopy, scanning electron microscopy, energy-dispersive x-ray spectroscopy, ultraviolet-visible-infrared spectroscopy, and extended x-ray absorption fine structure. The results demonstrate a film that can penetrate a porous matrix, with a local Zn structure of bulk ZnS, and a band gap between 3.5 and 3.6 eV. The ZnS film was used as a buffer layer in nanostructured PbS quantum dot solar cell devices.

36 MATERIALS SCIENCE↗

Highly Transparent Compositionally Graded Buffers for New Metamorphic Multijunction Solar Cell Designs

The development of compositionally graded buffer layers (CGBs) with enhanced transparency would enable novel five and six junction solar cells, with efficiencies approaching 50% under high concentration. Here, we demonstrate highly transparent grades between the GaAs and InP lattice constants on both A- and B-miscut GaAs substrates, employing Al x GayIn 1-x-y As and highly Se-doped Burstein-Moss (BM) shifted Ga x In 1-x P. Transparency to >810 and >890 nm wavelengths is demonstrated with BM-shifted Ga x In 1-x P on B-miscut substrates and Al x GayIn 1-x-y As/Ga x In 1-x P(Se) combined grades on A-miscut substrates, respectively. 0.74 eV GaInAs solar cells grown on these transparent CGBs exhibit Woc = 0.41 V at mA/ cm 2 , performance comparable with the state-of-the-art Ga x In 1-x P grade employed in the four-junction-inverted metamorphic multijunction (IMM) cell. A GaAs/0.74cV GaInAs tandem cell was grown with a transparent BM-shifted Ga x In 1-x P CGB to verify the CGB performance in a multijunction device structure. Quantum efficiency measurements indicate that the CGB is completely transparent to photons below the GaAs bandedge, validating its use in 4-6 junction IMM devices with a single-graded buffer. Furthermore, this tandem represents a highly efficient two-junction band gap combination, achieving 29.6% ± 1.2% efficiency under the AM1.5 global spectrum, demonstrating how the additional transparency enables new device structures.

14 SOLAR ENERGY↗

Defect-Limited Carrier Lifetime in Epitaxially Strained Germanium-On-Silicon Heterostructures

Epitaxially strained germanium-on-silicon (Ge-on-Si) heterostructures are central to next-generation photonic and electronic devices, yet their performance remains strongly constrained by defect-limited carrier lifetimes. In this work, we investigate the impact of defects on the carrier lifetime in relaxed Ge-on-Si and strained Ge-on-Si heterostructures. High-resolution X-ray diffraction quantifies the strain-state in Ge and reveals signatures of strain relaxation due to lattice mismatch. Cross-sectional and plan-view transmission electron microscopy analyses enable direct visualization of interfacial defects and quantification of threading dislocation densities (TDDs) within the Ge layer. However, the presence of a dense misfit dislocation network obscures the threading dislocation signatures, preventing reliable TDD determination by plan-view transmission electron microscopy in strained-Ge (..epsilon..-Ge). To assess the defect density in this case, etch-pit density measurements were performed, providing an alternative means of quantifying the TDDs in the ..epsilon..-Ge layer. Carrier lifetime measurements by microwave-reflection photoconductive decay reveal a clear relationship with TDDs ranging from 5 x 103 cm-2 to 2 x 1010 cm-2, confirming Shockley-Read-Hall recombination as the limiting mechanism at lower defect densities, with TDD-dominated recombination at higher defect densities. The Ge-on-Si relaxed heterostructure exhibited lifetimes much lower (~12 ns) than the lattice-matched Ge on gallium arsenide (GaAs) (~158 ns) heterostructure. Introducing controlled tensile strain reduces defect formation, suppresses strain-relaxation pathways, and leads to measurable improvements in minority carrier lifetime from 12 ns to 171 ns. These results establish a direct relation between defect suppression and carrier recombination dynamics in both relaxed Ge-on-Si grown directly on Si and strained Ge-on-Si heterostructures incorporating compound-semiconductor buffer layers, offering a materials-driven pathway for engineering Ge with improved carrier lifetime for photonic applications.

36 MATERIALS SCIENCE↗