Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst development.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Roll-to-roll production of catalyst coated membranes for low-temperature electrolyzers

Here we demonstrate a roll-to-roll (R2R) process for direct coating of anode catalyst layers on a polymer electrolyte membrane for low-temperature water electrolysis. To develop this process, we studied catalyst ink formulation, ink-membrane interactions, and coating quality. The catalyst inks were a mixture of iridium oxide (IrO2) and Nafion in a water and alcohol dispersion medium. The type of alcohol (methanol, ethanol, propanols) and water-to-alcohol ratio were varied to determine their influence on membrane swelling, dispersion quality, and coatability. Interactions of the ink dispersion medium with the membrane were characterized using sessile-drop contact-angle measurements. These measurements show that the ratio of water to alcohol has a strong influence on how rapidly the dispersion media is absorbed by the membrane. Rheology of the catalyst inks was measured to understand the microstructure of the catalyst particles in the ink. This analysis found that 1-propanol leads to better dispersion of the IrO2 particles than ethanol. Small-scale coating samples were prepared to understand coating uniformity and formation of irregularities. Subsequently, two water/1-propanol ratios (90:10 and 75:25) were down-selected for large-scale R2R slot die coating. The R2R catalyst-coated membrane (CCM) coating process increased catalyst layer production throughput by over 500x compared to our standard lab-scale spray coating. The CCMs obtained from this process were tested as single-cell membrane electrode assemblies. They exhibited a cell voltage of 1.91 V at a current density of 2 A/cm2, which is comparable to spray-coated CCMs. In conclusion, the work presented here demonstrates a continuous, scalable manufacturing process that eliminates the need for the decal transfer step typically used in CCM production.

42 ENGINEERING↗
DOE OSTI2025

Highly dense atomic Fe–Ni dual metal sites for efficient CO 2 to CO electrolyzers at industrial current densities

Carbon-supported, atomically dispersed, nitrogen-coordinated metal sites (e.g., Fe and Ni) are arguably the most promising catalysts for the electrochemical reduction of CO 2 to CO due to their unique catalytic properties and the use of earth-abundant elements. However, conventional single metal sites are constrained by their structural simplicity, causing either too weak or too strong absorption/desorption of multiple critical intermediates (e.g., *COOH and *CO). Current catalysts also suffer from ultra-low loadings (<1.0 wt%) of atomic metal active sites in catalysts, leading to inadequate performance for CO 2 -to-CO conversion. Here, we develop dual Ni/Fe metal site catalysts with significantly increased atomically dispersed metal loadings (up to 4.8 wt%). A gas-phase chemical vapor deposition (CVD) approach to introducing single Ni sites was integrated with Fe 2 O 3 /ZIF-8 precursors, followed by an optimal thermal activation. The optimized CVD-Ni/Fe–N–C catalyst exhibited remarkable electrocatalytic performance for the CO 2 reduction to CO in a continuous membrane-electrode-assembly electrolyzer, achieving a maximum CO faradaic efficiency (FE CO ) of 96% at a current density of 700 mA cm −2 in a near-neutral electrolyte. Furthermore, a desirable but challenging acidic flow-cell electrolyzer was designed using this dual metal site catalyst to improve CO 2 utilization, accomplishing a FE CO of up to 95% at a CO partial current density close to 600 mA cm −2 . Density functional theory (DFT) calculations suggest a synergetic effect between Fe–Ni pairs facilitating *COOH intermediate formation and *CO desorption simultaneously during CO 2 to CO conversion. This is key to breaking the linear scaling relationship of conventional single-metal site catalysts during the CO 2 reduction reaction.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Reflection Optical Imaging to Study Oxygen Evolution Reactions

Discovery of high-efficiency water-splitting catalysts is critical for clean hydrogen fuel generation. Quantitative and reliable chemical imaging methods can play a crucial role in providing critical catalyst efficiency information for materials development and screening. Here, we developed a reflection optical imaging method to map the performance of transition metal oxide catalysts for oxygen evolution reaction (OER). The generated high concentration of oxygen in the electrolyte will decrease the refractive index of the solutions near the electrode and change the reflectivity of optical images. We successfully imaged and measured the OER on cobalt oxide, and the localized current density and overpotential distribution maps have been extracted. The oxidation and reduction of cobalt oxide can be imaged with our reflection optical imaging method as well. These maps showed that the catalytic activities are quite different at different locations, and some regions showed much higher activities. This is due to the non-uniformity created by the catalyst synthesis process and demonstrates the importance of using the optical imaging method to map the localized catalytic efficiency. In addition, the NiFe alloy’s OER catalytic activities have been studied as well. The proposed reflection optical imaging method could find many applications in catalyst activity measurement and screening.

Electrochemistry↗
DOE OSTI2018

Advanced Catalysts and Membrane Electrode Assemblies (MEAs) for Reversible Alkaline Membrane Fuel Cells (Final Technical Report)

A reversible AMFC combines a fuel cell and an electrolyzer and can be used as an energy storage device. It can convert electrical energy to hydrogen, as storable fuel, and then use it in the fuel cell to provide electricity when needed. The major advantages of reversible fuel cells over batteries are the ability to store great quantities of energy. However, reversible AMFCs have not been widely deployed due to several limiting factors, including low performance of bi functional catalysts, instability of anion-exchange membranes and water management problems. This project will develop high-performance durable catalysts and MEAs that will address these problems. These MEAs will be integrated with other advanced components to construct reversible AMFCs. The performance, durability and efficiency of reversible AMFCs will be evaluated.

08 HYDROGEN↗
DOE OSTI2026

N 2 O Formation Mechanism and Suppression Strategy on Pt Catalysts for NO x Removal from Hydrogen-Internal Combustion Engines

Pt-based catalysts exhibit excellent low-temperature activity in the selective catalytic reduction of NO x with H 2 (H 2 -SCR), but their tendency to form N 2 O poses a significant challenge for practical use. This issue is further complicated by unclear formation mechanisms, hindering the development of more efficient catalysts. This study explored the N 2 O generation mechanisms on Pt catalysts supported by MgO, Al 2 O 3 , SiO 2 , and TiO 2 , aiming to achieve a deep understanding that could advance the Pt catalysts with high NO x conversion and minimized N 2 O emissions. Through systematic kinetics and characterization analyses, the direct influence of the support acidity and reactant dynamics (O 2 and NO) on N 2 O formation was clearly revealed. Notably, the Pt catalysts with strong NO adsorption capacity showed reduced N 2 O generation, highlighting the critical role of NO adsorption sites in the H 2 -SCR process. By incorporation of NO adsorption sites (i.e., MgO, BaO, CeO 2 ) onto Pt/SiO 2 , both the H 2 -SCR efficiency and N 2 selectivity (reduced N 2 O selectivity) were significantly enhanced, effectively reducing the N 2 O emissions through optimized surface NO adsorption. These findings provide a design framework for more selective Pt-based catalysts, advancing H 2 -SCR systems for effective NO x abatement from hydrogen-internal combustion engines, which is a promising carbon-free transportation technology.

36 MATERIALS SCIENCE↗
DOE OSTI2021

On the Nature of Field-Enhanced Water Dissociation in Bipolar Membranes

Bipolar membranes (BPMs) possess the potential to optimize pH environments for electrochemical synthesis applications when employed in reverse bias. Unfortunately, the performance of BPMs in reverse bias has long been limited by the rate of water dissociation (WD) occurring at the interface of the BPM. Herein, we develop a continuum model of the BPM that agrees with experiment to understand and enhance WD catalyst performance by considering multiple kinetic pathways for WD in the BPM junction catalyst layer. Here, the model reveals that WD catalysts with a more highly alkaline or acidic pH at the point of zero charge (pH PZC ) exhibit accelerated WD kinetics because the more acidic or alkaline pH PZC catalysts possess greater surface charge, enhancing the local electric field and rate of WD. The model is then employed to explore the sensitivity of the BPM performance to various BPM physical parameters. Finally, the model is used to simulate the operation of bimetallic WD catalysts, demonstrating that an optimal bimetallic catalyst has an acidic pH PZC catalyst matched with the cation-exchange layer and an alkaline pH PZC catalyst matched with the anion-exchange layer. The study provides insight into the operation of BPM WD catalysts and gives direction toward the development of next-generation WD catalysts for optimal BPM performance under water-splitting and related conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Boosting electrosynthesis of ammonia on surface-engineered MXene Ti 3 C 2

Seeking a breakthrough in the development of efficient nitrogen fixation catalysts has become the frontier of energy and chemical conversion schemes. In this work, we report that the MXene Ti 3 C 2 can serve as a promising catalyst for the electrochemical N 2 reduction reaction (NRR) under ambient conditions. The electrocatalytic performance of Ti 3 C 2 can be further optimized through surface engineering. Specifically, Ti 3 C 2 with the increased surface hydroxyl moieties demonstrates enhanced production of NH 3 with a yield rate of 1.71 μg h -1 cm -2 , a Faradaic efficiency of 7.01% at -0.2 V vs. RHE at 20 °C and an even higher yield rate of 12.46 μg h -1 cm -2 together with a Faradaic efficiency of 9.03% at -0.2 V vs. RHE at 60 °C. The detailed electrochemical analysis suggests that the surface hydroxyl modification can effectively facilitate the electron transfer, surface adsorption and activation of dinitrogen. Our work sheds light on the development of efficient NRR catalysts based on earth-abundant elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

Chemisorption studies of Pt/SnO2 catalysts

The low temperature CO oxidation catalysts that are being developed and tested at NASA-Langley are fairly unique in their ability to efficiently oxidize CO at low temperatures (approx. 303 K). The bulk of the reaction data that has been collected in the laboratory has been determined using plug flow reactors with a low mass of Pt/SnO2/SiO2 catalyst (approx. 0.1 g) and a modest flow rate (5 to 10 sc sm). The researchers have previously characterized the surface solely in terms of N2 BET surface areas. These surface areas have not been that indicative of reaction rate. Indeed, some of the formulations with high BET surface area have yielded lower reaction rates than those with lower BET surface areas. As a result researchers began a program of determining the chemisorption of the various species involved in the reaction; CO, O2 and CO2. Such a determination of will lead to a better understanding of the mechanism and overall kinetics of the reaction. The pulsed-reactor technique, initially described by Freel, is used to determine the amount of a particular molecule that is adsorbed on the catalyst. Since there is some reaction of CO with the surface to produce CO2, the pulsed reactor had to be coupled with a gas chromatograph in order to distinguish between the loss of CO that is due to adsorption by the surface and the loss that is due to reaction with the surface.

Brown, Kenneth G.↗
DOE OSTI2020

Active Learning-driven Quantitative Synthesis-Structure-Property Relations for Improving Performance and Revealing Active Sites of Nitrogen-Doped Carbon for the Hydrogen Evolution Reaction

While quantitative structure-properties relations (QSPRs) have been developed successfully in multiple fields, catalyst synthesis affects structure and in turn performance, making simple QSPRs inadequate. Furthermore, catalysts often have multiple active sites preventing one from obtaining insights into structure-property relations. Here, we develop a data-driven quantitative synthesis-structure-property relation (QS2PRs) methodology to elucidate correlations between catalyst synthesis conditions, structural properties as well as observed performance and to provide fundamental insights into active sites and a systematic way to optimize practical catalysts. Here, we demonstrate the approach to the synthesis of nitrogen-doped catalysts (NDC) made via pyrolysis for the performance of the electrochemical hydrogen evolution reaction (HER), quantified by the onset potential and the current density. We determine crystallinity, nitrogen species type and fraction, surface area, and pore structure of the NDC’s using XRD, XPS, and BET characterization. We demonstrated that an active learning-based optimization combined with various elementary machine learning tools (regression, principal component analysis, partial least squares) can efficiently identify optimum pyrolysis conditions to tune structural characteristics and performance with concomitant savings in materials and experimental time. Unlike previous reports on the importance of pyridinic or graphitic nitrogen, we discover that the electrochemical performance is not driven by a single catalyst property; rather, it arises from a multivariate influence of nitrogen dopants, pore structure and disorder in the NDC materials. Identification of active sites can help mechanistic understanding and further catalyst improvement.

42 ENGINEERING↗
DOE OSTI2022

A unique Co@CoO catalyst for hydrogenolysis of biomass-derived 5-hydroxymethylfurfural to 2,5-dimethylfuran

The development of precious-metal-free catalysts to promote the sustainable production of fuels and chemicals from biomass remains an important and challenging target. Here, we report the efficient hydrogenolysis of biomass-derived 5-hydroxymethylfurfural to 2,5-dimethylfuran over a unique core-shell structured catalyst, Co@CoO that affords the highest productivity among all catalysts, including noble-metal-based catalysts, reported to date. Surprisingly, we find that the catalytically active sites reside on the shell of CoO with oxygen vacancies rather than the metallic Co. The combination of various spectroscopic experiments and computational modelling reveals that the CoO shell incorporating oxygen vacancies not only drives the heterolytic cleavage, but also the homolytic cleavage of H 2 to yield more active H δ- species, resulting in the exceptional catalytic activity. Co@CoO also exhibits excellent activity toward the direct hydrodeoxygenation of lignin model compounds. This study unlocks, for the first time, the potential of simple metal-oxide-based catalysts for the hydrodeoxygenation of renewable biomass to chemical feedstocks.

09 BIOMASS FUELS↗
DOE OSTI2021

Comprehensive Characterization of Mixed Metal Oxide Catalysts for Enhanced Catalyst Lifetime During Bio-Based C2-C6 Oxygenates to Olefins Processes (CRADA CRD-18-00728 Final Report)

Participant has developed mixed metal oxide (MMO) catalysts to selectively convert biomass-derived C2-C6 oxygenates to olefins and then hydrocarbon fuels to meet DOE 2022 fuel targets. Selective conversion ethanol to isobutylene with MMO catalysts (ZnOZrOx) requires low ethanol feeds to maintain performance. Increasing the feed results in rapid catalyst deactivation. Participant has increased catalyst stability by adding additional metal oxides. However, variations in performance based on the level and type of additive and catalytic conditions have been observed. This project will use advanced catalyst characterization methods through the ChemCatBio Advanced Catalyst Synthesis and Characterization (ACSC) project to gain insight into key catalyst features and deactivation modes with the goal of tailoring catalyst composition to improve performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Identification and Catalysis of the Potential-Limiting Step in Lithium-Sulfur Batteries

The Li-S chemistry is thermodynamically promising for high-density energy storage but kinetically challenging. Over the past few years, many catalyst materials have been developed to improve the performance of Li-S batteries and their catalytic role has been increasingly accepted. However, the classic catalytic behavior, i.e., reduction of reaction barrier, has not been clearly observed. Crucial mechanistic questions, including what specific step is limiting the reaction rate, whether/how it can be catalyzed, and how the catalysis is sustained after the catalyst surface is covered by solid products, remain unanswered. Herein, we report the first identification of the potential-limiting step of Li-S batteries operating under lean electrolyte conditions and its catalysis that conforms to classic catalysis principles, where the catalyst lowers the kinetic barrier of the potential-limiting step and accelerates the reaction without affecting the product composition. After carefully examining the electrochemistry under lean electrolyte conditions, we update the pathway of the Li-S battery reaction: S 8 solid is first reduced to Li 2 S 8 and Li 2 S 4 molecular species sequentially; the following reduction of Li 2 S 4 to a Li 2 S 2 -Li 2 S solid with an almost constant ratio of 1:4 is the potential-limiting step; the previously believed Li 2 S 2 -to-Li 2 S solid-solid conversion does not occur; the recharging reaction is relatively fast. We further demonstrate that supported cobalt phthalocyanine molecules can effectively catalyze the potential-limiting step. After Li 2 S 2 /Li 2 S buries the active sites, it can self-catalyze the reaction and continue driving the discharging process.

25 ENERGY STORAGE↗
DOE OSTI2024

3D printing synthesis of catalysts

The catalyst industry generates approximately $20 billion every year globally and plays a major role in the energy production sector. Traditional industrial catalysts (e.g., pellets) typically have mass and heat transfer limitations, and cause a pressure drop in continuous-flow reactors, lowering the efficiency of the catalytic processes. 3D printing technology has evolved rapidly over the past decade, and the 3D printing of catalysts with desired geometries can address many of the above-stated challenges with traditional catalysts. However, challenges remain to be addressed and opportunities remain to be explored before the full potential in the design and 3D printing of novel catalysts can be realized. Herein this article reviews the recent development in the 3D printing of catalysts. It summarizes the 3D printing design, dimension, property, and performance of 3D printed catalysts. The applications of 3D printed catalysts, such as reforming, wastewater treatment, and CO 2 capture and removal, are discussed, with a techno-economic analysis and life cycle analysis. Future research directions and opportunities for 3D printing of catalysts are also highlighted.

25 ENERGY STORAGE↗
NASA NTRS2015

NASA - Johnson Space Center's New Capabilities for Air Purification

NASA has some unique and challenging air purification problems that cannot be adequately met with COTS technology: 1) ammonia removal from air, 2) hydrazine removal from air, 3) CO conversion to CO2 in low temperature, high humidity environments. NASA has sponsored the development of new sorbents and new catalysts. These new sorbents and catalysts work better than COTS technology for our application. If attendees have a need for an effective ammonia sorbent, an effective hydrazine sorbent, or an effective CO conversion catalyst, we should learn to see if NASA sponsored technology development can help.

Graf, John↗
DOE OSTI2019

Surface-supported cluster catalysis: Ensembles of metastable states run the show

It has recently been demonstrated that the dynamic behaviour of surface-supported nanocluster catalysts in realistic reaction conditions defies conventional models used in catalysis. This opens new doors in catalysis by giving more leverage in catalyst design, but also requires a major revision of the understanding of how dynamic heterogeneous catalytic interfaces operate, as well as of the computational approaches of catalyst modelling, and experimental methods of catalyst characterization. Key aspects of the new paradigm include the collective action of many catalyst states that form a statistical ensemble in reacting conditions, the catalytic activity and selectivity being driven by rare and metastable catalyst states, reaction thermodynamics and kinetics being controlled by different states of the catalyst, broken scaling relationships, non-Arrhenius behaviours, and catalyst dynamic restructuring being an essential part of the reaction mechanism. For computation, this complexity means the departure from the standard DFT calculations of reaction mechanisms on a single catalyst structure. For experiment, it calls for the development of operando characterization tools with the per-site resolution and the ability to find the minority sites that govern the catalytic activity. For catalyst design, the goal becomes the creation of the catalyst state (geometric and electronic) that might not be present in the as-prepared catalyst, but would develop in the reaction conditions and would have the desired activity then. While cluster catalysts are the most dramatic in their dynamic fluxionality, other amorphous interfaces also exhibit some of it, and thus are also subject to similar paradigm revision.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Chapter 3. Understanding the Effects of Composition and Structure on the Oxygen Evolution Reaction (OER) Occurring on NiFeOx Catalysts. IN: Energy and Environment Series No. 22, Integrated Solar Fuel Generators

© The Royal Society of Chemistry 2019. Hydrogen produced by wind- or solar energy-driven electrochemical splitting of water could be used to store renewable electrical energy or to reduce biomass or CO2 to carbon-containing fuels. The potential required for the splitting of water is larger than the thermodynamic potential due to the insufficient activity of the catalysts required for the two half reactions involved in water splitting - the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). The OER and HER occur at the anode and cathode, respectively, of the electrochemical cell. Since the overpotential for the OER can be nearly an order of magnitude larger than that for the HER, considerable attention has been devoted to finding and developing highly active OER catalysts, and in particular those based on earth-abundant elements. To date this goal has been best met with catalysts based on oxides and oxyhydroxides of Ni and Fe for alkaline electrolysis. This chapter reviews the current understanding of such catalysts and examines the role of catalyst synthesis method and percentage of Fe content on catalyst performance. Particular attention is given to the role of Fe3+ cations exchanged into the lattice of NiOOH in enhancing the OER activity of the host material. This issue is discussed from both experimental and theoretical perspectives with the aim of identifying how and why the additions of Fe3+ cations enhance catalyst performance. The chapter ends with a brief overview of recent efforts aimed at identifying elements other than Fe that can be added to Ni oxide to enhance its OER activity and elements that can be added to NiFe oxyhydroxides to further enhance their OER activity.

Bell, Alexis T↗