Search NASA⌕ Search

SEARCH · Search NASA

Results for “circularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Effect of convective Mach number on mixing of coaxial circular and rectangular jets

Rectangular supersonic free and coaxial jets were used to enhance mixing relative to a circular jet in a convective Mach number range of 0.5 to 2.2. The different convective Mach numbers were obtained by changing the central jet gas composition, the temperatures of the inner and outer flows, and the velocity of the coaxial flow. The experimental techniques used were schlieren photography, total pressure, and gas-sampling measurements. For all test conditions the rectangular jets showed substantial improved mixing relative to a circular jet. The free jets showed high mixing in the circumferential region of the jet while the coaxial jet had a high mixing rate inside the central jet.

Gutmark, E.↗

An experimental comparison of nonswirling and swirling flow in a circular-to-rectangular transition duct

Circular-to-rectangular transition duct flows with and without inlet swirl were investigated experimentally in order to determine the effect of inlet swirl on the transition duct flow field and to provide detailed duct flow data for comparison with numerical code predictions. Coefficients based on detailed measurements of velocity, total pressure and static pressure, acquired in four cross stream planes within a circular-to-rectangular transition duct, with and without inlet swirl, are presented, as are surface static pressure and surface oil film visualization results.

Reichert, B. A.↗

Circular polarization in 1612 MHz OH maser emission from OH/IR stars

In order to study the incidence of circular polarization in the 1612 MHz OH emission from envelopes of OH/IR stars, the Arecibo radio telescope was used to obtain high-resolution, high signal-to-noise 1612 MHz spectra in both circular polarizations for several OH/IR stars. The method of Troland and Heiles (1982) was used to estimate the intensities of magnetic fields in the envelopes. The fields appear to have complex structures, and intensities on the order of 1-100 microG. The spectra are weakly polarized, probably as a result of weakly polarized emission from individual emitting elements. Integration over the Stokes parameter V yields nonzero results for three of the stars, suggesting that another polarizing mechanism (in addition to simple Zeeman splittings) is at work.

Zell, Philip↗

Linear and circular digital spectral analysis of serial data

Two methods of digital spectral analysis of unevenly sampled data are developed and illustrated here. One method uses a linear function of time (or space), the other uses circular functions. The circular method turns out to be essentially equivalent to a least-squares sine-wave analysis. The linear, anharmonic method uses only the field of real numbers and elementary algebraic operations, and hence it can be made computationally very fast and accurate. Both methods are very general, properly handling all kinds of time series ranging from simple series consisting only of the times of events to complicated series consisting of pulses with long duty cycles. The two methods are here applied to the analysis of annual mean relative sunspot numbers.

Stothers, Richard B.↗

Flow visualization and computational studies of a reverse flow circular combustor

The development of a reverse-flow circular combustor is described in terms of the visualization techniques that are employed to optimize the flow and mixing of fuel and air. The Fluent computer program is used in conjunction with flow visualization studies to investigate the performance of the combustor. The combustor has multiple mini-combustion zones (MCZs) and fuel injection nozzles along its circular geometry, and the fuel injection design is modeled to determine temperature distribution, including the performance at the combustor exit. The yellow dye smoke used in the visualization demonstrated desirable flow patterns with rapid circulation patterns within the MCZs and extensive interaction between the channel flow and the MCZs. The results are similar to those of CFD models, and the main conclusions are that fuel atomization can be further optimized and that the fuel injector nozzle can control swirls, fuel spray angle, and jet penetration.

Ghorashi, B.↗

Supersonic combustion with transverse, circular wall jets

A series of experiments are reported using inclined circular wall jets in rectangular scramjet combustion chambers configured as constant area ducts. A free piston shock tunnel was used to create inlet flow Mach numbers between 4.2 and 5.5, at enthalpies corresponding to flight speeds of between 3.5 and 5.3 km/s. Measurements of duct static pressure levels indicated that significant mixing and combustion was achieved. Using hydrogen as a fuel, it was found that multipoint injection from two sides of the duct gave a larger, and more rapid, pressure rise. In hypersonic flow, it was found that combustion only occurred for the same duct dimensions and operating conditions that supported combustion with central injection from a two-dimensional strut. Wall injection from discrete orifice circular jets was found to be more effective than two-dimensional wall injection across the whole width of the duct.

Morgan, R. G.↗

Reconfiguring the RUM experiment to test circular scanning with rotating unbalanced-mass devices on gimbaled payloads

This paper describes a ground-based experiment designed to prove the concept of circular scanning a gimbaled payload with rotating unbalanced-mass (RUM) devices. The experiment is a modified version of a similar experiment which demonstrates line and raster scanning with RUM's. In this paper, a description of the experiment hardware is presented and a detailed design of the servos used in scanning is given. A computer simulation model of the entire system is discussed and simulation results are included. These verify the servo designs and show the RUM's to be an extremely power efficient method for circular scanning.

Polites, M. E.↗

Nonlinear response of infinitely long circular cylindrical shells to subharmonic radial loads

The nonlinear response of infinitely long circular cylindrical shells (thin circular rings) in the presence of a two-to-one internal (autoparametric) resonance to a subharmonic excitation of order one-half of the higher mode is analyzed with the multiple-scale method. Four autonomous first-order ordinary differential equations are derived for the modulation of the amplitudes and phases of the interacting models. These modulation equations are used to determine the fixed points and their stability. The fixed points correspond to periodic oscillations of the shell, whereas the limit-cycle solutions of the modulation equations correspond to amplitude and phase-modulated oscillations of the shell. The force response curves exhibit saturation, jumps, and Hopf bifurcation. As excitation frequency changes, all limit cycles deform and lose stability through either pitchfork or cyclic-fold (saddle-node) bifurcations. Some of these saddle-node bifurcations cause a transition to chaos. The pitchfork bifurcations break the symmetry of the limit cycles.

Nayfeh, Ali H.↗

Scattering-Matrix Program For Circular Waveguide Components

Scattering Matrix Program for Circular Waveguide Junctions, CWGSCAT, computes scattering matrices of series of circular waveguide sections. Sections must have same axis, but radius and length of each section completely arbitrary. Step discontinuities, corrugated sections, and horns analyzed. Written in FORTRAN.

Hoppe, Daniel J.↗

Circularly polarized radio emission from the T Tauri star Hubble 4

Multiwavelength VLA observations of the weak-lined T Tauri star (WTTS) Hubble 4, which is located in the nearby (about 140 pc) Taurus-Auriga star-forming region, are reported. The emission is characterized by a nearly flat spectral energy distribution with a spectral index of 0 (S sub nu varies as nu exp alpha). Right circular polarization was detected at both 3.6 and 6 cm at levels of 19 +/- 5 percent and 18 +/- 3 percent, respectively, with an upper limit of not more than 15 percent (3 sigma) at 20 cm. The star was in a state of low radio activity, with flux densities of 1.3-1.7 mJy and a radio luminosity of 10 exp 16.5 ergs/Hz s. The unambiguous detection of circularly polarized radio emission from Hubble 4 provides direct evidence for the existence of ordered magnetic fields in this WTTS.

Skinner, Stephen L.↗

Precession and circularization of elliptical space-tether motion

In this paper, we present a simplified analytic model for predicting motion of long space tethers. The perturbation model developed here addresses skip rope motion, where each end of the tether is held in place and the middle of the tether swings with a motion similar to that of a child's skip rope. If the motion of the tether midpoint is elliptical rather than circular, precession of the ellipse complicates the procedures required to damp this motion. The simplified analytic model developed in this paper parametrically predicts the precession of elliptical skip rope motion. Furthermore, the model shows that elliptic skip rope motion will circularize when damping is present in the longitudinal direction. Compared with high-fidelity simulation results, this simplified model provides excellent predictions of these phenomena.

Chapel, Jim D.↗

Parametric instabilities of finite-amplitude, circularly polarized Alfven waves in an anisotropic plasma

A class of parametric instabilities of finite-amplitude, circularly polarized Alfven waves in a plasma with pressure anisotropy is studied by application of the CGL equations. A linear perturbation analysis is used to find the dispersion relation governing the instabilities, which is a fifth-order polynomial and is solved numerically. A large-amplitude, circularly polarized wave is unstable with respect to decay into three waves: one sound-like wave and two side-band Alfven-like waves. It is found that, in addition to the decay instability, two new instabilities that are absent in the framework of the MHD equations can occur, depending on the plasma parameters.

Hamabata, Hiromitsu↗

A 10 GHz Y-Ba-Cu-O/GaAs hybrid oscillator proximity coupled to a circular microstrip patch antenna

A 10 GHz hybrid YBCO/GaAs microwave oscillator proximity coupled to a circular microstrip antenna has been designed, fabricated, and characterized. The oscillator was a reflection mode type using a GaAs MESFET as the active element. The feedline, transmission lines, RF chokes, and bias lines were all fabricated from YBCO superconducting thin films on a 1 cm x 1 cm lanthanum aluminate substrate. The output feedline of the oscillator was wire bonded to a superconducting feedline on a second 1 cm x 1 cm lanthanum aluminate substrate, which was in turn proximity coupled to a circular microstrip patch antenna. Antenna patterns from this active patch antenna and the performance of the oscillator measured at 77 K are reported. The oscillator had a maximum output power of 11.5 dBm at 77 K, which corresponded to an efficiency of 10 percent. In addition, the efficiency of the microstrip patch antenna together with its high temperature superconducting feedline was measured from 85 K to 30 K and was found to be 71 percent at 77 K, increasing to a maximum of 87.4 percent at 30 K.

Rohrer, Norman J.↗

Stress and strain concentration at a circular hole in an infinite plate

The theory of elasticity shows that the maximum stress at a circular hole in an infinite plate in tension is three times the applied stress when the material remains elastic. The effect of plasticity of the material is to lower this ratio. This paper considers the theoretical problem of the stress distribution in an infinitely large sheet with a circular hole for the general case where the material may have any stress-strain curve. The plate is assumed to be under uniform tension at a large distance from the hole. The material is taken to be isotropic and incompressible. (author)

THEORIES - ELASTICITY↗

The flow of a compressible fluid past a circular arc profile

The Ackeret iteration process is utilized to obtain higher approximations than that of Prandtl and Glauert for the flow of a compressible fluid past a circular arc profile. The procedure is to expand the velocity potential in a power series of the camber coefficient. The first two terms of the development correspond to the Prandtl-Glauert approximation and yield the well-known correction to the circulation about the profile. The second approximation, involving the square of the camber coefficient, improves the velocity and pressure fields but yields no new results with regard to the circulation, since the circulation about the profile is an odd function of the camber coefficient. The third approximation, involving the cube of the camber coefficient, permits the use of higher values of the camber coefficient and furthermore yields an improvement to the Prandtl-Glauert rule with regard to the effect of compressibility on the circulation of the circular arc profile. Numerical examples with tables and graphs illustrate the results of the analysis.

Kaplan, Carl↗

An Experimental Investigation of Transonic Flow Past Two-Dimensional Wedge and Circular-Arc Sections Using A Mach-Zehnder Interferometer

Report presents the results of interferometer measurements of the flow field near two-dimensional wedge and circular-arc sections of zero angle of attack at high-subsonic and low-supersonic velocities. Both subsonic flow with local supersonic zone and supersonic flow with detached shock wave have been investigated. Pressure distributions and drag coefficients as a function of Mach number have been obtained. The wedge data are compared with the theoretical work on flow past wedge sections of Guderley and Yoshihara, Vincenti and Wagner, and Cole. Pressure distributions and drag coefficients for the wedge and circular-arc sections are presented throughout the entire transonic range of velocities.

Bryson, Arthur Earl, Jr↗

On the symmetrical potential flow of compressible fluid past a circular cylinder in the tunnel in the subcritical zone

The two-dimensional symmetrical potential flow of compressible fluid past a circular cylinder placed in the center line of a straight tunnel is analyzed in second approximation according to the Jansen-Rayleigh method. The departure of the profile from the exact circular shape can be kept to the same magnitude as for the incompressible flow. The velocities in the narrowest section of the tunnel wall and at the profile edge are discussed in detail.

Lamla, Ernst↗

Statics of circular-ring stiffeners for monocoque fuselages

For circular-ring stiffeners in monocoque fuselages the bending moments, axial forces, and shear forces under the action of applied external forces or a moment are accurately computed by known methods. Circular-ring stiffeners with variable moments of inertia are likewise considered. In comparison with the step-by-step and partially graphical procedure, the one here described is a more accurate and at the same time a simpler method.

Stieda, W↗