Search NASA⌕ Search

SEARCH · Search NASA

Results for “coherent diffraction microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Rapid breakdown anodization technique for the synthesis of high aspect ratio and high surface area anatase TiO{sub 2} nanotube powders

Clusters of high aspect ratio, high surface area anatase-TiO{sub 2} nanotubes with a typical nanotube outer diameter of about 18 nm, wall thickness of approximately 5 nm and length of 5-10 {mu}m were synthesized, in powder form, by breakdown anodization of Ti foils in 0.1 M perchloric acid, at 10 V (299 K) and 20 V ({approx}275 and 299 K). The surface area, morphology, structure and band gap were determined from Brunauer Emmet Teller method, field emmission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Raman, photoluminescence and diffuse reflectance spectroscopic studies. The tubular morphology and anatase phase were found to be stable up to 773 K and above 773 K anatase phase gradually transformed to rutile phase with disintegration of tubular morphology. At 973 K, complete transformation to rutile phase and disintegration of tubular morphology were observed. The band gap of the as prepared and the annealed samples varied from 3.07 to 2.95 eV with increase in annealing temperature as inferred from photoluminescence and diffuse reflectance studies. -- Graphical abstract: Display Omitted Research highlights: {yields} High aspect ratio anatase-titania nanotube powders were synthesized electrochemically. {yields} The surface area of the nanotubes were much higher than those reported. {yields} The annealing temperature limit for maintaining tubular morphology was established. {yields} The photoluminiscence spectroscopy reflected the presence of defects, annealing of defects and phase transformation. {yields} The nanotubes were of {approx}5 nm wall thickness as revealed by TEM studies.

36 MATERIALS SCIENCE↗

Thermal annealing synthesis of titanium-dioxide nanowire-nanoparticle hetero-structures

Crystalline TiO{sub 2} nanowire-nanoparticle hetero-structures were successfully synthesized from titanium foils by using a simple thermal annealing method with the aid of CuCl{sub 2} at the atmospheric pressure. Nanowires were grown from Ti foils by simply annealing Ti foils at 850 {sup o}C. Then, TiCl{sub 4} was delivered to TiO{sub 2} nanowires so as to precipitate TiO{sub 2} nanoparticles on nanowire surfaces. At 750 {sup o}C reaction temperature, nanoparticles of tens of nanometers in diameter were well distributed on pre-grown nanowire forests. Nanoparticles were likely to be precipitated by TiCl{sub 4} decomposition or oxidation and that require high temperatures above {approx}650 {sup o}C. Electron microscopy, X-ray diffraction, and UV-vis spectroscopy analyses show they have the rutile polycrystalline structure with a slightly enlarged bandgap compared to that of bulk TiO{sub 2}. The influence of key synthesis parameters including reaction temperature, reaction time, and quantity of supplied materials on the incorporating nanoparticles was also systematically studied. The optimum reaction condition in the present paper was identified to be 750 {sup o}C annealing with repetitive 20 min reactions. A higher reaction temperature yielded larger diameter particles, and higher loading of Ti produced dense particles without changing the particle size. Finally, this method could be utilized for synthesizing other metal oxide nanowires-nanoparticle hetero-structures. - Graphical abstract: Schematic of proposed reaction mechanisms for synthesizing the hetero-structures: (a) TiO{sub 2} nanowires were grown as base structures for capturing TiCl{sub 4} gas. (b) TiCl{sub 4} gas was oxidized, precipitating crystalline TiO{sub 2} nanoparticles. (c) Repeated particle-incorporation process created tree-like hetero-structures.

36 MATERIALS SCIENCE↗

One-step growth of Si{sub 3}N{sub 4} stem-branch featured nanostructures: Morphology control by VS and VLS mode

We report here one-step synthesis of Si{sub 3}N{sub 4} nanodendrites by selectively applying a vapor-solid (VS) and vapor-liquid-solid (VLS) strategy via direct current arc discharge method. The resultant nanodendrites were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy and X-ray powder diffraction. The spine-shaped nanodendrites were generated by a noncatalytic growth following a VS mode. The uniform secondary nanowire branches were epitaxial grown from two side surfaces of the nanowire stems. The pine-shaped nanodendrites were obtained through a catalytic growth in a VLS process. These branch nanowires were unsystematically grown from the nanocone-like stems. The photoluminescence spectra of the nanodendrites show a strong white light emission around 400-750 nm, suggesting their potential applications in light and electron emission devices. - Graphical abstract: Spine-shaped and pine-shaped Si{sub 3}N{sub 4} hierarchical nanostructures were synthesized by VS and VLS mode with plasma-assisted dc arc discharge method. Highlights: > Si{sub 3}N{sub 4} stem-branch featured nanostructures have been prepared. > Spine-shaped nanodendrites were generated by a noncatalytic growth following a VS mode. > Pine-shaped nanodendrites were obtained through a catalytic growth in a VLS process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The ternary system cerium-palladium-silicon

Phase relations in the ternary system Ce-Pd-Si have been established for the isothermal section at 800 deg. C based on X-ray powder diffraction and EMPA techniques on about 130 alloys, which were prepared by arc-melting under argon or powder reaction sintering. Eighteen ternary compounds have been observed to participate in the phase equilibria at 800 deg. C. Atom order was determined by direct methods from X-ray single-crystal counter data for the crystal structures of tau{sub 8}-Ce{sub 3}Pd{sub 4}Si{sub 4} (U{sub 3}Ni{sub 4}Si{sub 4}-type, Immm; a=0.41618(1), b=0.42640(1), c=2.45744(7) nm), tau{sub 16}-Ce{sub 2}Pd{sub 14}Si (own structure type, P4/nmm; a=0.88832(2), c=0.69600(2) nm) and also for tau{sub 18}-CePd{sub 1-x}Si{sub x} (x=0.07; FeB-type, Pnma; a=0.74422(5), b=0.45548(3), c=0.58569(4) nm). Rietveld refinements established the atom arrangement in the structures of tau{sub 5}-Ce{sub 3}PdSi{sub 3} (Ba{sub 3}Al{sub 2}Ge{sub 2}-type, Immm; a=0.41207(1), b=0.43026(1), c=1.84069(4) nm) and tau{sub 13}-Ce{sub 3-x}Pd{sub 20+x}Si{sub 6} (0<=x<=1, Co{sub 20}Al{sub 3}B{sub 6}-type, Fm3-barm; a=1.21527(2) nm). The ternary compound Ce{sub 2}Pd{sub 3}Si{sub 3} (structure-type Ce{sub 2}Rh{sub 1.35}Ge{sub 4.65}, Pmmn; a=0.42040(1), b=0.42247(1), c=1.72444(3) nm) was detected as a high-temperature compound, however, does not participate in the equilibria at 800 deg. C. Phase equilibria in Ce-Pd-Si are characterized by the absence of cerium solubility in palladium silicides. Mutual solubility among cerium silicides and cerium-palladium compounds are significant whereby random substitution of the almost equally sized atom species palladium and silicon is reflected in extended homogeneous regions at constant Ce-content such as for tau{sub 2}-Ce(Pd{sub x}Si{sub 1-x}){sub 2} (AlB{sub 2}-derivative type), tau{sub 6}-Ce(Pd{sub x}Si{sub 1-x}){sub 2} (ThSi{sub 2}-type) and tau{sub 7}-CePd{sub 2-x}Si{sub 2+x}. The crystal structures of compounds tau{sub 4}-Ce{sub a}pprox{sub 8}Pd{sub a}pprox{sub 46}Si{sub a}pprox{sub 46}, tau{sub 12}-Ce{sub a}pprox{sub 29}Pd{sub a}pprox{sub 49}Si{sub a}pprox{sub 22}, tau{sub 15}-Ce{sub a}pprox{sub 22}Pd{sub a}pprox{sub 67}Si{sub a}pprox{sub 11}, tau{sub 17}-Ce{sub a}pprox{sub 5}Pd{sub a}pprox{sub 77}Si{sub a}pprox{sub 18} and tau{sub 18}-CePd{sub 1-x}Si{sub x} (xapprox0.1) are still unknown. - Abstract: Phase relations in the ternary system Ce-Pd-Si have been established for the isothermal section at 800 deg. C based on X-ray powder diffraction, metallography, SEM and EMPA techniques on about 130 alloys. 18 ternary compounds were observed. Display Omitted

36 MATERIALS SCIENCE↗

A Facile synthesis of flower-like Co{sub 3}O{sub 4} porous spheres for the lithium-ion battery electrode

The porous hierarchical spherical Co{sub 3}O{sub 4} assembled by nanosheets have been successfully fabricated. The porosity and the particle size of the product can be controlled by simply altering calcination temperature. SEM, TEM and SAED were performed to confirm that mesoporous Co{sub 3}O{sub 4} nanostructures are built-up by numerous nanoparticles with random attachment. The BET specific surface area and pore size of the product calcined at 280 deg. C are 72.5 m{sup 2} g{sup -1} and 4.6 nm, respectively. Our experiments further demonstrated that electrochemical performances of the synthesized products working as an anode material of lithium-ion battery are strongly dependent on the porosity. - Graphical abstract: The flower-like Co{sub 3}O{sub 4} porous spheres with hierarchical structure have been successfully prepared via a simple calcination process using cobalt hydroxide as precursor.

36 MATERIALS SCIENCE↗

The ternary system cerium-rhodium-silicon

Phase relations have been established in the ternary system Ce-Rh-Si for the isothermal section at 800 deg. C based on X-ray powder diffraction and EPMA on about 80 alloys, which were prepared by arc melting under argon or by powder reaction sintering. From the 25 ternary compounds observed at 800 deg. C 13 phases have been reported earlier. Based on XPD Rietveld refinements the crystal structures for 9 new ternary phases were assigned to known structure types. Structural chemistry of these compounds follows the characteristics already outlined for their prototype structures: tau{sub 7}-Ce{sub 3}RhSi{sub 3}, (Ba{sub 3}Al{sub 2}Ge{sub 2}-type), tau{sub 8}-Ce{sub 2}Rh{sub 3-x}Si{sub 3+x} (Ce{sub 2}Rh{sub 1.35}Ge{sub 4.65}-type), tau{sub 10}-Ce{sub 3}Rh{sub 4-x}Si{sub 4+x} (U{sub 3}Ni{sub 4}Si{sub 4}-type), tau{sub 11}-CeRh{sub 6}Si{sub 4} (LiCo{sub 6}P{sub 4}-type), tau{sub 13}-Ce{sub 6}Rh{sub 30}Si{sub 19.3} (U{sub 6}Co{sub 30}Si{sub 19}-type), tau{sub 18}-Ce{sub 4}Rh{sub 4}Si{sub 3} (Sm{sub 4}Pd{sub 4}Si{sub 3}-type), tau{sub 21}-CeRh{sub 2}Si (CeIr{sub 2}Si-type), tau{sub 22}-Ce{sub 2}Rh{sub 3+x}Si{sub 1-x} (Y{sub 2}Rh{sub 3}Ge-type) and tau{sub 24}-Ce{sub 8}(Rh{sub 1-x}Si{sub x}){sub 24}Si (Ce{sub 8}Pd{sub 24}Sb-type). For tau{sub 25}-Ce{sub 4}(Rh{sub 1-x}Si{sub x}){sub 12}Si a novel bcc structure was proposed from Rietveld analysis. Detailed crystal structure data were derived for tau{sub 3}-CeRhSi{sub 2} (CeNiSi{sub 2}-type) and tau{sub 6}-Ce{sub 2}Rh{sub 3}Si{sub 5} (U{sub 2}Co{sub 3}Si{sub 5}-type) by X-ray single crystal experiments, confirming the structure types. The crystal structures of tau{sub 4}-Ce{sub 22}Rh{sub 22}Si{sub 56}, tau{sub 5}-Ce{sub 20}Rh{sub 27}Si{sub 53} and tau{sub 23}-Ce{sub 33.3}Rh{sub 58.2-55.2}Si{sub 8.5-11.5} are unknown. High temperature compounds with compositions Ce{sub 10}Rh{sub 51}Si{sub 33} (U{sub 10}Co{sub 51}Si{sub 33}-type) and CeRhSi (LaIrSi-type) have been observed in as-cast alloys but these phases do not participate in the phase equilibria at 800 deg. C. - Graphical abstract: Phase relations in the ternary system Ce-Rh-Si have been established for the isothermal section at 800 deg. C based on X-ray powder and single-crystal diffraction, metallography, SEM and EMPA techniques on about 80 alloys. 25 ternary compounds were observed.

36 MATERIALS SCIENCE↗

Novel pseudo-morphotactic synthesis and characterization of tungsten nitride nanoplates

A novel pseudo-morphotactic transformation route was developed to synthesize polycrystalline {beta}-W{sub 2}N nanoplates by thermally treating tungstate-based inorganic-organic hybrid nanobelts with a lamellar microstructure in an NH{sub 3} flow. The tungstate-based hybrid nanobelts were formed in a water-in-oil-microemulsion-like 'commercial H{sub 2}WO{sub 4} powders/n-octylamine/heptane' reaction system. The as-obtained hybrid nanobelts were thermally treated in an NH{sub 3} atmosphere at 650-800 {sup o}C for 2 h to form cubic {beta}-W{sub 2}N nanoplates. XRD, SEM, TEM, FT-IR and TG-DTA were used to characterize the precursors and their final products. The polycrystalline {beta}-W{sub 2}N nanoplates derived from hybrid nanobelts, with side lengths of several hundred nanometers, consist of small nanocrystals with an average grain size of 3.2 nm. The formation of {beta}-W{sub 2}N nanoplates involved two steps: decomposing tungstate-based hybrid nanobelts into WO{sub y} and W species and then nitridizing the active W-containing species to {beta}-W{sub 2}N nanocrystals in an NH{sub 3} flow. The platelike morphology of the {beta}-W{sub 2}N nanocrystals was inherited from the precursor of tungstate-based inorganic-organic hybrid nanobelts. -- A novel pseudo-morphotactic transformation route was developed to synthesize {beta}-W{sub 2}N nanoplates by thermally treating tungstate-based inorganic-organic hybrid nanobelts, the morphology of which was inherited to the {beta}-W{sub 2}N nanocrystals. Research highlights: {yields} We synthesize {beta}-W{sub 2}N nanoplates using inorganic-organic hybrid nanobelts as precursors. {yields} {beta}-W{sub 2}N nanoplates are formed at 650-800 {sup o}C for 2 h in an NH{sub 3} flow. {yields} {beta}-W{sub 2}N nanoplates consist of small nanocrystals. {yields} The plate-like morphology of {beta}-W{sub 2}N is inherited from its hybrid precursor. {yields} The pseudo-morphotactic transformation route is suitable for large-scale synthesis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Morphology-controlled synthesis and novel microwave electromagnetic properties of hollow urchin-like chain Fe-doped MnO{sub 2} under 10 T high magnetic field

Fe-doped MnO{sub 2} with a hollow sea urchin-like ball chain shape was first synthesized under a high magnetic field of 10 T. The formation mechanism was investigated and discussed in detail. The synthesized samples were characterized by XRD, SEM, TEM, EMPA, and vector network analysis. By doping MnO{sub 2} with Fe, the relative complex permittivity of MnO{sub 2} and its corresponding loss tangent clearly decreases, but its relative complex permeability and its corresponding loss tangent markedly increases. Moreover, the theoretically calculated values of reflection loss show that with increasing the Fe content, the as-prepared Fe-doped MnO{sub 2} exhibits good microwave absorption capability. -- Graphical Abstract: Fe-doped MnO{sub 2} with a hollow sea urchin-like ball chain shape was first synthesized in a high magnetic field of 10 T via a simple chemical process. Display Omitted Highlights: {yields} Fe-doped MnO{sub 2} with a hollow sea urchin-like ball chain shape was first synthesized. {yields} We investigated formation mechanism and electromagnetic properties of the Fe-doped MnO{sub 2}. {yields} By doping MnO{sub 2} with Fe, the electromagnetic properties are improved obviously.

36 MATERIALS SCIENCE↗

The influence of diffusion temperature on the structural, optical and magnetic properties of manganese-doped zinc oxysulfide thin films

We investigated the structural, optical and magnetic properties of Mn-doped zinc oxysulfide films. Zn(O,S) films were deposited by a spray pyrolysis method on glass substrate. A thin Mn layer evaporated on these films served as the source for the diffusion doping. The XRD pattern of undoped films revealed the presence of two wurtzite phases corresponding to ZnS and ZnO with a strong preferred orientation along the ZnS (0 0 2) hexagonal plane direction. SEM showed a similar surface morphology for the undoped and Mn-doped films, displaying regular arrays of hexagonal micro-rods perpendicular to the substrate. The optical transmission measurements showed that both undoped and Mn diffusion-doped films had a low average transmittance less than about 10%. The gap energy is decreased from 3.42 to 3.33 eV upon annealing at 400 deg. C. Photoluminescence studies at 300 K show that the incorporation of manganese leads to a decrease of deep level band intensity compared to undoped sample. Clear ferromagnetic loops were observed for the Mn-doped Zn(O,S) films, which might be due to the presence of point defects. - Graphical abstract: M-H variation of Mn diffusion-doped Zn(O,S) thin films measured at 300 K. Highlights: > Zinc oxysulfide thin films fabricated by spray pyrolysis and doped with Mn. > Regular arrays of hexagonal micro-rods perpendicular to the substrate. > Optical transmission measurements showed that both undoped and Mn diffusion-doped films had a low average transmittance less than about 10%. > Magnetic measurements show that Mn-doped zinc oxysulfide thin films exhibit a ferromagnetism behavior at room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of Pt deposited nanotubular TiO{sub 2} as cathodes for enhanced photoelectrochemical hydrogen production using seawater electrolytes

The purpose of this study was to develop effective cathodes to increase the production of hydrogen and use the seawater, an abundant resource in the earth as the electrolyte in photoelectrochemical systems. In order to fabricate the Pt/TiO{sub 2} cathodes, various contents of the Pt precursor (0-0.4 wt%) deposited by the electrodeposition method were used. On the basis of the hydrogen evolution rate, 0.2 wt% Pt/TiO{sub 2} was observed to exhibit the best performance among the various Pt/TiO{sub 2} cathodes with the natural seawater and two concentrated seawater electrolytes obtained from single (nanofiltration) and combined membrane (nanofiltration and reverse osmosis) processes. The surface characterizations exhibited that crystal structures and morphological properties of Pt and TiO{sub 2} found the results of XRD pattern and SEM/TEM images, respectively. - Graphical abstract: On the basis of photoelectrochemical hydrogen production, 0.2 wt% Pt/TiO{sub 2} was observed to exhibit the best performance among the various Pt/TIO{sub 2} cathodes with natural seawater. In comparison of hydrogen evolution rate with various seawater electrolytes, 0.2 wt% Pt/TiO{sub 2} was found to show the better performance as cathode with the concentrated seawater electrolytes obtained from membrane. Highlights: > Pt deposited TiO{sub 2} electrodes are used as cathode in PEC H{sub 2} production. > Natural and concentrated seawater by membranes are used as electrolytes in PEC. > Pt/TiO{sub 2} shows a good performance as cathode with seawater electrolytes. > H{sub 2} evolution rate increases with more concentrated seawater electrolyte. > Highly saline seawater is useful resource for H{sub 2} production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermomagnetic irreversibility and magnetic short range ordering in Mn{sub 2.5}Co{sub 0.5}O{sub 4} tetragonal spinel thin films

Mn{sub 2.5}Co{sub 0.5}O{sub 4} films are grown on MgO(001) and (011) substrate by molecular beam epitaxy. Detailed structural and magnetic analyses are carried out by x-ray diffraction and magnetization measurements. The reduction of the lattice parameter c/a* ratio and the enhancement of the Curie temperature (from 43 to 66 K), due to the weakening of the Jahn-Teller effect, are observed. In addition, thermomagnetic reversibility is observed at lower temperature and low external filed indicating the existence of local canting states. The randomness of Co cation and uniaxial anisotropy further enhance the local canting effect. An H-T phase diagram is mapped out, which indicates a short rang order state in the temperature 66-85 K separating the ferrimagentic and paramagnetic phases.

36 MATERIALS SCIENCE↗

Research on the Preparation of (CuAg){sub x}In{sub 2x}Zn{sub 2(1-2x)}S{sub 2} Solid Solution Photocatalysts

ZnS-CuInS{sub 2}-AgInS{sub 2} solid solution photocatalysts were successfully prepared by co-precipitation method with heat treatment under different atmosphere (N{sub 2} and H{sub 2}S). XRD, XRF, UV-vis, and SEM were used to characterize the prepared photocatalysts, indicated that the composition of result photocatalysts were different from each other and also the rate of charge, though they possessed a wurtzite-type phase structure. The photocatalysts all showed photocatalytic activities for H{sub 2} evolution from aqueous solutions containing SO{sub 3}{sup 2-} and S{sup 2-} as sacrificial reagents under visible light irradiation with Ru loading, but sample treated under H{sub 2}S atmosphere performed better, the possible reason was proposed.

36 MATERIALS SCIENCE↗

Atomic site sensitivity of the energy loss magnetic chiral dichroic spectra of complex oxides

The quantitative analysis of magnetic oxide core level spectra can become complicated when the magnetic atoms are located at several nonequivalent atomic sites in the crystal. This is, for instance, the case for Fe atoms in magnetite, which are located in tetrahedral and octahedral atomic sites; in this case, the x-ray magnetic circular dichroic (XMCD) spectra recorded at the L{sub 2,3} edge of Fe contain contributions from the different nonequivalent atomic sites, which unfortunately cannot be separated. Energy loss magnetic chiral dichroic (EMCD) spectra are the transmission electron microscope analogies of the XMCD spectra. One of the important differences between these two techniques of magnetic analysis is that EMCD uses a fast electron beam instead of polarized light. The fast electrons behave like Bloch states in the sample, and the fine structure of the EMCD spectra is strongly influenced by channeling and dynamical diffraction effects. These effects can be adjusted by changing the experimental configuration. We use theoretical calculations, which include dynamical diffraction effects and in which electronic transitions are treated in the atomic multiplet formalism, to show that the relative weight of the Fe atoms in different nonequivalent atomic sites can be changed by a proper choice of the position of the detector and of the magnetite sample orientation and thickness. We conclude that EMCD spectra could be used to isolate the magnetic contribution of atoms in each of the nonequivalent atomic sites, which would not be possible with XMCD techniques.

36 MATERIALS SCIENCE↗

Epitaxial high saturation magnetization FeN thin films on Fe(001) seeded GaAs(001) single crystal wafer using facing target sputterings

It was demonstrated that Fe-N martensite ({alpha}') films were grown epitaxially on Fe(001) seeded GaAs(001) single crystal wafer by using a facing target sputtering method. X-ray diffraction pattern implies an increasing c lattice constant as the N concentration increases in the films. Partially ordered Fe{sub 16}N{sub 2} films were synthesized after in situ post-annealing the as-sputtered samples with pure Fe{sub 8}N phase. Multiple characterization techniques including XRD, XRR, TEM, and AES were used to determine the sample structure. The saturation magnetization of films with pure Fe{sub 8}N phase measured by VSM was evaluated in the range of 2.0-2.2 T. The post annealed films show systematic and dramatic increase on the saturation magnetization, which possess an average value of 2.6 T. These observations support the existence of giant saturation magnetization in {alpha}''-Fe{sub 16}N{sub 2} phase that is consistent with a recent proposed cluster-atom model and the first principles calculation [N. Ji, X. Q. Liu, and J. P. Wang, New J. Phys. 12 063032 (2010)].

36 MATERIALS SCIENCE↗

Highly Emissive Transition Metal Ion Doped Semiconducting Nanocrystals

Doped semiconductor nanocrystals (d-dots), specifically ones not containing heavy metal ions, have the potential to become a class of mainstream emissive materials. Mn- and Cu-doped ZnSe or ZnS d-dots can cover an emission window similar to that of the current workhorse of intrinsic quantum dot (q-dots) emitters, CdSe nanocrystals. We synthesized high quality stable Cu doped ZnSe in nonpolar as well as polar solvent. The emission intensity of these doped nanocrystals is found stable for months under UV irradiation, after different multifunctional ligand which is important for any biological detection. We have also synthesized the stable Mn doped ZnS in nonpolar solvent more than 50% QY.. The doped nanocrystals are characterized by TEM, XRD, EPR and ICP analysis.

36 MATERIALS SCIENCE↗

Characterization of Structural and Pigmentary Colors in Common Emigrant (Catopsilia Pomona) Butterfly

Study of structural colors in case of insects and butterflies is important for their biomimic and biophotonics applications. Structural color is the color which is produced by physical structures and their interaction with light while pigmentary color is produced by absorption of light by pigments. Common Emigrant butterfly is widely distributed in India. It is of moderate size with wing span of about 60-80 mm. The wings are broadly white with yellow or sulphur yellow coloration at places as well as few dark black patches. It belongs to family Pieridae. A study of structural color in case of Common Emigrant butterfly has been carried out in the present work. The characterization of wing color was performed using absorption spectroscopy. Scanning electron microscopic study of the wings of Common Emigrant butterfly showed that three different types of scales are present on the wing surface dorsally. Diffracting structures are present in certain parts of the surfaces of the various scales. Bead like structures are embedded in the intricate structures of the scales. Absorption spectra revealed that a strong absorption peak is seen in the UV-range. Crystalline structure of beads was confirmed by the X-ray diffraction analysis.

60 APPLIED LIFE SCIENCES↗

Intrinsic ferromagnetic properties in Cr-doped ZnO diluted magnetic semiconductors

The Cr-doped zinc oxide (Zn{sub 1-x}Cr{sub x}O, 0{<=}x{<=}0.08) diluted magnetic semiconductors have been synthesized successfully by the sol-gel method. Investigations on magnetic, optical and structural properties of the produced samples have been done. Energy dispersive spectroscopy (EDS) shows the existence of Cr ion in the Cr-doped ZnO. The results of X-ray diffraction (XRD), the transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS) and X-ray absorption fine structure (XAFS) indicate that the Cr ions are at least partially substitutionally incorporated into the crystal lattice of ZnO. The produced samples show good high-T{sub c} (Curie temperature) ferromagnetism (FM) in Cr-doped ZnO nanoparticles with Cr concentration of less than 5 at%. The results of photoluminescence (PL) further testify that FM is an intrinsic property of the Cr-doped ZnO nanoparticles. And the occurrence of FM should mainly contribute to the Cr doping. -- Graphical Abstract: As can be seen from the magnetic hysteresis loops of Zn{sub 1-x}Cr{sub x}O (x=0.01, 0.03, 0.05, and 0.08) at room temperature under 10 KOe, the samples show good high-T{sub c} ferromagnetism with Cr concentration of less than 5 at%. Display Omitted Highlights: {yields} Zn{sub 1-x}Cr{sub x}O(0{<=}x{<=}0.08) nanoparticles are successfully synthesized by sol-gel method. {yields} The Cr ions are substitutionally incorporated into the crystal lattice of ZnO. {yields} The Cr-doped ZnO nanoparticles show good high-T{sub c} ferromagnetism. {yields} The ferromagnetism is an intrinsic property of the Cr-doped ZnO nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cubic Sc{sub 1-x}Al{sub x}N solid solution thin films deposited by reactive magnetron sputter epitaxy onto ScN(111)

Reactive magnetron sputter epitaxy was used to deposit thin solid films of Sc{sub 1-x}Al{sub x}N (0<=x<=1) onto MgO(111) substrates with ScN(111) seed layers. Stoichiometric films were deposited from elemental Sc and Al targets at substrate temperatures of 600 deg. C. The films were analyzed by Rutherford backscattering spectroscopy, elastic recoil detection analysis, x-ray diffraction, and transmission electron microscopy. Results show that rocksalt structure (c)-Sc{sub 1-x}Al{sub x}N solid solutions with AlN molar fractions up to approx60% can be synthesized. For higher AlN contents, the system phase separates into c- and wurtzite structure (w)-Sc{sub 1-x}Al{sub x}N domains. The w-domains are present in three different orientations relative to the seed layer, namely, Sc{sub 1-x}Al{sub x}N(0001)||ScN(111) with Sc{sub 1-x}Al{sub x}N[1210]||ScN[110], Sc{sub 1-x}Al{sub x}N(1011)||ScN(111) with Sc{sub 1-x}Al{sub x}N[1210]||ScN[110], and Sc{sub 1-x}Al{sub x}N(1011)||ScN(113). The results are compared to first-principles density functional theory calculations for the mixing enthalpies of c-, w-, and zinc blende Sc{sub 0.50}Al{sub 0.50}N solid solutions, yielding metastability with respect to phase separation for all temperatures below the melting points of AlN and ScN.

36 MATERIALS SCIENCE↗