Search NASA⌕ Search

SEARCH · Search NASA

Results for “compounds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Closure Report for Corrective Action Unit 566: EMAD Compound, Nevada National Security Site, Nevada with ROTCs 1-2, Revision 0

This Closure Report (CR) presents information supporting the closure of Corrective Action Unit (CAU) 566: EMAD Compound, Nevada National Security Site, Nevada. Corrective Action Unit 566 comprises Corrective Action Site (CAS) 25-99-20, EMAD Compound, located within Area 25 of the Nevada National Security Site. The purpose of this CR is to provide documentation supporting the completed corrective actions and provide data confirming that the closure objectives for CAU 566 were met. To achieve this, the following actions were performed: • Review the current site conditions, including the concentration and extent of contamination. • Implement any corrective actions necessary to protect human health and the environment. • Properly dispose of corrective action and investigation wastes. • Document Notice of Completion and closure of CAU 566 issued by the Nevada Division of Environmental Protection. From October 2010 through May 2011, closure activities were performed as set forth in the Streamlined Approach for Environmental Restoration Plan for CAU 566: EMAD Compound, Nevada National Security Site, Nevada. The purposes of the activities as defined during the data quality objectives process were as follows: • Determine whether contaminants of concern (COCs) are present. • If COCs are present, determine their nature and extent, implement appropriate corrective actions, and properly dispose of wastes. Analytes detected during the closure activities were evaluated against final action levels (FALs) to determine COCs for CAU 566. Assessment of the data from collected soil samples, and from radiological and visual surveys of the site, indicates the FALs were exceeded for polychlorinated biphenyls (PCBs), semivolatile organic compounds (SVOCs), and radioactivity. Corrective actions were implemented to remove the following: • Radiologically contaminated soil assumed greater than FAL at two locations • Radiologically contaminated soil assumed greater than FAL with lead shot • PCB-contaminated soil • Radiologically contaminated filters and equipment • Fuels, lubricants, engine coolants, and oils • Lead debris • Electrical and lighting components assumed to be potential source materials, including - fluorescent light bulbs - mercury switches (thermostats) - circuit boards - PCB-containing ballasts Closure of CAU 566 was achieved through a combination of removal activities and closure in place. Corrective actions to remove COCs, and known and assumed potential source materials, were implemented as was practical. The PCBs remaining at the site are bounded laterally, but not vertically, within CAS 25-99-20 based upon step-out sampling; the sources (e.g., PCB transformer oils, diesel fuel from locomotive reservoirs) have been removed; the practice of the application of PCB-containing oils for soil stabilization has ceased; and the COCs are not readily mobile in the environment. Closure in place is necessary, and future land use of the site will be restricted from intrusive activities. This will effectively eliminate inadvertent contact by humans with the contaminated media. The DOE, National Nuclear Security Administration Nevada Site Office, provides the following recommendations: • No further corrective action is required at CAS 25-99-20. • Closure in place of CAS 25-99-20. • A use restriction is required at CAU 566. • A Notice of Completion to the DOE, National Nuclear Security Administration Nevada Site Office, is requested from the Nevada Division of Environmental Protection for closure of CAU 566. • Corrective Action Unit 566 should be moved from Appendix III to Appendix IV of the Federal Facility Agreement and Consent Order.

54 ENVIRONMENTAL SCIENCES↗

Compounding Risks from Natural Phenomena Hazards at U.S. Department of Energy Facilities

U.S. Department of Energy (DOE) facilities are exposed to adverse effects of natural phenomena hazards (NPHs). While the DOE Standard (STD) 1020-2016 provides criteria and guidance for assessing these effects, certain gaps exist, particularly related to combinations of NPHs that can compound the risk to DOE facility assets. This report describes a methodology to systematically consider compounding NPHs, identified gaps in DOE-STD-1020-2016, and recommends ways to update the standard. At any given DOE facility, NPH effects depend on the site-specific hydrometeorologic and geoseismic conditions. Therefore, compounding NPHs should be determined using site-specific assessments. DOE facility assets generally are assessed using site-specific NPHs with the assessment usually limited to the DOE site extents. However, an inventory analysis of a selected DOE facility also revealed that some assets may have off-site dependencies. These dependencies may be part of threat pathways that can lead to on-site asset failures because of off-site effects of the same NPHs that also affect the DOE site. These threat pathways usually are not accounted for in traditional NPH analyses. The report also describes the effects of duration of NPH effects. Duration of disruption, particularly for off-site dependencies can lead to on-site asset failures, disruption of evacuation roadways, and consequent human health and safety effects. Finally, the report recommends some considerations for updating DOE-STD-1020-2016 to include explicit consideration of compounding NPHs.

42 ENGINEERING↗

Editorial: Bioconversion and Biorefinery of C1 Compounds

The past decade has seen significant progress in the field of metabolic engineering and synthetic biology. The exponentially growing multi-omics data and technological advances in the development of efficient genetic manipulation tools and techniques have allowed scientists to explore and expand their understanding of microbial metabolisms and further develop sophisticated engineering strategies to realize the use of industrial "workhorses" and non-conventional microorganisms for sustainable bioconversion and biorefinery. There is of great interest for the research community in using C1 compounds (i.e., CO 2 , CO/syngas, methane, methanol) as the next generation feedstocks for microbial cell factories and biocatalysts to promote the sustainable development of a green economy (Figure 1). Considering lowering input costs is also a main consideration for successful business ventures, the use of inexpensive, abundant, and widely accessible C1 compounds is envisioned as a promising route for the sustainable production of fine chemicals, fuels, and other high-value products. Many C1 compounds are waste gases from industrial activities and may have detrimental effects on climate change upon emission into the atmosphere. Therefore, promoting the use of C1 compounds as renewable carbon feedstocks can greatly contribute to the reduction of anthropogenic emission of air pollutants.

09 BIOMASS FUELS↗

Misfit layer compounds and ferecrystals: Model systems for thermoelectric nanocomposites

A basic summary of thermoelectric principles is presented in a historical context, following the evolution of the field from initial discovery to modern day high-zT materials. A specific focus is placed on nanocomposite materials as a means to solve the challenges presented by the contradictory material requirements necessary for efficient thermal energy harvest. Misfit layer compounds are highlighted as an example of a highly ordered anisotropic nanocomposite system. Their layered structure provides the opportunity to use multiple constituents for improved thermoelectric performance, through both enhanced phonon scattering at interfaces and through electronic interactions between the constituents. Recently, a class of metastable, turbostratically-disordered misfit layer compounds has been synthesized using a kinetically controlled approach with low reaction temperatures. The kinetically stabilized structures can be prepared with a variety of constituent ratios and layering schemes, providing an avenue to systematically understand structure-function relationships not possible in the thermodynamic compounds. We summarize the work that has been done to date on these materials. The observed turbostratic disorder has been shown to result in extremely low cross plane thermal conductivity and in plane thermal conductivities that are also very small, suggesting the structural motif could be attractive as thermoelectric materials if the power factor could be improved. The first 10 compounds in the [(PbSe) 1+δ ] m (TiSe₂) n family (m, n ≤ 3) are reported as a case study. As n increases, the magnitude of the Seebeck coefficient is significantly increased without a simultaneous decrease in the in-plane electrical conductivity, resulting in an improved thermoelectric power factor.

36 MATERIALS SCIENCE↗

Compound-Specific Carbon Isotope Compositions of Aldehydes and Ketones in the Murchison Meteorite

Compound-specific carbon isotope analysis (delta(exp 13)C) of meteoritic organic compounds can be used to elucidate the abiotic chemical reactions involved in their synthesis. The soluble organic content of the Murchison carbonaceous chondrite has been extensively investigated over the years, with a focus on the origins of amino acids and the potential role of Strecker-cyanohydrin synthesis in the early solar system. Previous delta(exp 13)C investigations have targeted alpha-amino acid and alpha-hydroxy acid Strecker products and reactant HCN; however, delta(exp 13)C values for meteoritic aldehydes and ketones (Strecker precursors) have not yet been reported. As such, the distribution of aldehydes and ketones in the cosmos and their role in prebiotic reactions have not been fully investigated. Here, we have applied an optimized O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine (PFBHA) derivatization procedure to the extraction, identification, and delta(exp 13)C analysis of carbonyl compounds in the Murchison meteorite. A suite of aldehydes and ketones, dominated by acetaldehyde, propionaldehyde, and acetone, were detected in the sample. delta(exp 13)C values, ranging from -10.0(0/00) to +66.4(0/00), were more (exp 13)C-depleted than would be expected for aldehydes and ketones derived from the interstellar medium, based on interstellar (exp 12)C/(exp 13)C ratios. These relatively (exp 13)C-depleted values suggest that chemical processes taking place in asteroid parent bodies (e.g., oxidation of the IOM) may provide a secondary source of aldehydes and ketones in the solar system. Comparisons between delta(exp 13)C compositions of meteoritic aldehydes and ketones and other organic compound classes were used to evaluate potential structural relationships and associated reactions, including Strecker synthesis and alteration-driven chemical pathways.

meteoritic organic compounds↗

First-Principle Calculations of Structural, Elastic, and Electronic Properties of Intermetallic Rare Earth R{sub 2}Ni{sub 2}Pb (R = Ho, Lu, and Sm) Compounds

The structural, elastic, and electronic properties of rare earth intermetallic R{sub 2}Ni{sub 2}Pb (where R = Ho, Lu, and Sm) compounds were investigated with the density functional theory (DFT) calculations. The calculations are performed using the full potential-linearized augmented plane wave (FP-LAPW) method within the framework of local density approximation (LDA). The calculated values of the equilibrium lattice constants were in agreement with the available experimental values. The elastic constants (C{sub ij}) were also calculated to understand the mechanical properties and structural stability of the compounds. Furthermore, the density of states and the charge density distributions of the compounds were calculated to understand the nature of the bonding in the material. The calculated results are in accordance with the available data in the literature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principle studies of Ca-X (X=Si,Ge,Sn,Pb) intermetallic compounds

The structural properties, elastic properties, heats of formation, electronic structures, and densities of states of 20 intermetallic compounds in the Ca-X (X=Si, Ge, Sn, Pb) systems have been systematically investigated by using first-principle calculations. Our computational results indicated that with increasing atomic weight of X, the bulk modulus of Ca-X intermetallic compounds decreases gradually. It was also found that Ca{sub 36}Sn{sub 23} and CaPb are mechanically unstable phases. Results on the electronic energy band and densities of states also indicated that Ca{sub 3}Si{sub 4} is an indirect band gap semiconductor with a band gap of 0.598 eV, and Ca{sub 2}Si, Ca{sub 2}Ge, Ca{sub 2}Sn, and Ca{sub 2}Pb are direct band gap semiconductors with band gaps of 0.324, 0.265, 0.06, and 0.07 eV, respectively. In addition, it is found that the absolute values of heats of formation for all Ca-X intermetallics are larger than 30 kJ/mol atom. - Graphical abstract: Calculated (a) bulk moduli and (b) shear moduli of Ca-X system intermetallic compounds.

36 MATERIALS SCIENCE↗

Preparation of a new pyrochlore-type compound Na{sub 0.32}Bi{sub 1.68}Ti{sub 2}O{sub 6.46}(OH){sub 0.44} by hydrothermal reaction

A new pyrochlore-type Na{sub 0.32}Bi{sub 1.68}Ti{sub 2}O{sub 6.46}(OH){sub 0.44} with the cubic cell of a=10.339(5) A was prepared by hydrothermal reaction using TiO{sub 2} (anatase) and Bi{sub 2}O{sub 3} in NaOH solution. This compound was obtained when the molar ratio of NaOH/TiO{sub 2} was above 2 and the reaction temperature was above 240 deg. C. The TG-curve of as-prepared sample showed a mass loss of 0.8 mass% which was caused by release of OH group. This compound decomposed to a pyrochlore-type compound and a layered-type Na{sub 0.5}Bi{sub 4.5}Ti{sub 4}O{sub 15} above 800 deg. C. The optical band gap of Na{sub 0.32}Bi{sub 1.68}Ti{sub 2}O{sub 6.46}(OH){sub 0.44} was estimated to be 2.5 eV. - Graphical abstract: SEM image and schematic representation of the structure of Na{sub 0.32}Bi{sub 1.68}Ti{sub 2}O{sub 6.46} (OH){sub 0.44}. Highlights: > A new pyrochlore-type Na{sub 0.32}Bi{sub 1.68}Ti{sub 2}O{sub 6.46}(OH){sub 0.44} is first prepared via a facile hydrothermal route. > The chemical composition is concluded to be Na{sub 0.32}Bi{sub 1.68}Ti{sub 2}O{sub 6.46}(OH){sub 0.44} from the analysis of experimental results. > The crystal data and atomic parameters can compare with those of pyrochlore-type bismuth titanates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dispersion of the linear and nonlinear optical susceptibilities of the CuAl(S{sub 1–x}Se{sub x})₂ mixed chaclcopyrite compounds

Based on the electronic band structure, we have calculated the dispersion of the linear and nonlinear optical susceptibilities for the mixed CuAl(S{sub 1–x}Se{sub x})₂ chaclcopyrite compounds with x=0.0, 0.25, 0.5, 0.75, and 1.0. Calculations are performed within the Perdew-Becke-Ernzerhof general gradient approximation. The investigated compounds possess a direct band gap of about 2.2 eV (CuAlS₂), 1.9 eV (CuAl(S₀.₇₅Se₀.₂₅)₂), 1.7 eV (CuAl(S₀.₅Se₀.₅)₂), 1.5 eV (CuAl(S₀.₂₅Se₀.₇₅)₂), and 1.4 eV (CuAlSe₂) which tuned to make them optically active for the optoelectronics and photovoltaic applications. These results confirm that substituting S by Se causes significant band gaps' reduction. The optical function's dispersion ε₂{sup xx}(ω) and ε₂{sup zz}(ω)/ε₂{sup xx}(ω), ε₂{sup yy}(ω), and ε₂{sup zz}(ω) was calculated and discussed in detail. To demonstrate the effect of substituting S by Se on the complex second-order nonlinear optical susceptibility tensors, we performed detailed calculations for the complex second-order nonlinear optical susceptibility tensors, which show that the neat parents compounds CuAlS₂ and CuAlSe₂ exhibit | χ₁₂₂²}(-2ω;ω;ω) | as the dominant component, while the mixed alloys exhibit | χ₁₁₁²(-2ω;ω;ω) | as the dominant component. The features of | χ₁₂₃²}(-2ω;ω;ω) | and | χ{sub 111}²}(-2ω;ω;ω) | spectra were analyzed on the basis of the absorptive part of the corresponding dielectric function ε₂(ω) as a function of both ω/2 and ω.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raman spectra of Cu{sub 2}B{sup II}C{sup IV}X{sub 4}{sup VI} magnetic quaternary semiconductor compounds with tetragonal stannite type structure

A comparative study of the Raman spectra of Cu{sub 2}B{sup II}C{sup IV}S{sub 4}{sup VI} and Cu{sub 2}B{sup II}C{sup IV}Se{sub 4}{sup VI}(where B = Mn or Fe) magnetic quaternary semiconductor compounds with stannite-type structure (I4{sup ¯}2m) has been done. Most of the fourteen Raman lines expected for these materials were observed in the spectra. The two strongest lines observed have been assigned to the IR inactive A{sub 1}{sup 1} and A{sub 1}{sup 2} stannite modes that originated from the motion of the S or Se anion around the Cu and C{sup IV} cations remaining at rest. The shift in the frequency of these two lines of about 150 cm{sup −1} to lower energies observed in Cu{sub 2}B{sup II}C{sup IV}Se{sub 4}{sup VI} compounds as compared to those in Cu{sub 2}B{sup II}C{sup IV}S{sub 4}{sup VI} ones, can then be explained as due to the anion mass effect. Based on the fact that values of these frequencies depend mainly on anion mass and bond-stretching forces between nearest-neighbor atoms, the vibrational frequencies v{sup ¯}(A{sub 1}{sup 2}) and v{sup ¯}(A{sub 1}{sup 2}) of both modes for several Cu{sub 2}B{sup II}C{sup IV}X{sub 4}{sup VI} stannite compounds (where X = S, Se, or Te) very close to the experimental data reported for these materials were calculated from a simple model that relates these stretching forces to the anion-cation bond-distances.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, electronic and elastic properties of REIr{sub 2} (RE=La and Ce) Laves phase compounds

REIr{sub 2} (RE = La and Ce) Laves phase intermetallic compounds were investigated with respect to their structural, electronic and elastic properties using full potential linearized augmented plane wave (FP-LAPW) method within generalized gradient approximation (GGA) as implemented in WIEN2k code. The ground state properties such as lattice constants (a{sub 0}), bulk modulus (B), pressure derivative of bulk modulus (B′) and density of state at Fermi level N(E{sub F}) have been obtained by optimization method. The electronic structure (BS, TDOS and PDOS) reveals that these Laves phase compounds are metallic in nature. The calculated elastic constants indicate that these compounds are mechanically stable at ambient pressure and found to be ductile in nature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effects of La Doping on the Crystal Structure, Magnetic, and Microwave Absorption Properties of Nd{sub 2}Fe{sub 14}B Compound

The crystal structure, magnetic, and microwave absorption properties of the (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B system have been investigated. The La{sub 2}Fe{sub 14}B compound was successfully synthesized and refined, giving a tetragonal structure, space group P4{sub 2}/mnm with the Nd{sub 2}Fe{sub 14}B-type structure. The crystal structure parameters of the (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B compounds were determined by full-profile Rietveld refinements. The results revealed that all intermediate alloys form a continuous solid solution. The normalized lattice parameters of the (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B compounds increase linearly with an increase of La concentration. Based on the results of DSC measurements and X-ray powder diffraction examinations, the phase diagram of the Nd{sub 2}Fe{sub 14}B-La{sub 2}Fe{sub 14}B system has been constructed. The remanence (M{sub r}) and coercivity (H{sub c}) of (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B (x = 0.00, 0.10, 0.20, 0.30, and 0.40) gradually decrease. The highest reflection loss is − 29.8, − 27.4, − 24.1, − 18.6, and − 14.2 dB at 9.8, 8.9, 7.5, 6.9, and 6.5 GHz, respectively. The absorption peak shifts toward from higher frequency region to lower frequency region and the absorption bandwidth widens with the increase of the La substitution.

36 MATERIALS SCIENCE↗

The crystal and magnetic structure of the magnetocaloric compound FeMnP{sub 0.5}Si{sub 0.5}

The crystal and magnetic structure of the magnetocaloric compound FeMnP{sub 0.5}Si{sub 0.5} has been studied by means of neutron and X-ray powder diffraction. Single phase samples of nominal composition FeMnP{sub 0.5}Si{sub 0.5} have been prepared by the drop synthesis method. The compound crystallizes in the Fe{sub 2}P-type structure (P6-bar 2m) with the magnetic moments aligned along the a-axis. It is found that the Fe atoms are mainly situated in the tetrahedral 3g site while the Mn atoms prefer the pyramidal 3f position. The material is ferromagnetic (T{sub C}=382 K) and at 296 K the total magnetic moment is 4.4{mu}{sub B}/f.u. It is shown that the magnetic moment in the 3f site is larger (2.5{mu}{sub B}) than in the 3g site (1.9{mu}{sub B}). - Graphical abstract: The magnetic structure of FeMnP{sub 0.5}Si{sub 0.5} at 296 K. Revealed from refinements of neutron powder diffraction data. Highlights: > Single phase samples of the compound FeMnP{sub 0.5}Si{sub 0.5} has been synthesized by the drop synthesis method. > The crystal and magnetic structure was revealed from neutron powder diffraction data. > The material was found to crystallize in the Fe{sub 2}P-structure (P6-bar 2m). > The magnetic moments are coordinated along the a-axis with a total moment of 4.4{mu}{sub B}. > The large magnetic moments make FeMnP{sub 0.5}Si{sub 0.5} useful in magnetocaloric applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of morphology and magnetic properties of the HoNi{sub 3} crystalline and ball-milled compound

The morphology and magnetic properties of the HoNi{sub 3} crystalline and ball-milled intermetallic compounds are presented. The polycrystalline HoNi{sub 3} bulk compound crystallizes in the rhombohedral PuNi{sub 3} — type of crystal structure and indicates ferrimagnetic arrangement with the Curie temperature of T{sub C} = 57 ± 2 K, the helimagnetic temperature T{sub h} = 23 ± 2 K with the total saturation magnetic moment of 6.84 μ{sub B}/f.u. at 2 K. The use of the ball-milling method leads to the formation of HoNi{sub 3} nanoflakes with typical thickness of less than 100 nm prone to agglomeration upon milling. The increase of grinding duration leads to the reduction in crystallite size, which was confirmed by various complementary microscopical and diffraction studies. Moreover, the increase in milling duration results in the emergence of the relatively small coercivity (H{sub C}), remanence (M{sub r}) and a variation of the saturation magnetization (M{sub S}). - Graphical abstract: Display Omitted - Highlights: • The ball-milling method exhibits significant potential for producing RT{sub 3} nanopowders. • The AFM method was used for the first time in analysis of R–T nanoflakes morphology. • HoNi{sub 3} compound forms polycrystalline and textured nanoflakes evolving upon milling. • The decrease in crystallite size via grinding is confirmed by XRD, TEM and AFM. • The magnetic parameters were sensitive to the extension of pulverization b.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin-glass-like behavior and negative thermal expansion in antiperovskite Mn{sub 3}Ni{sub 1−x}Cu{sub x}N compounds

The Cu-doping effect on the lattice and magnetic properties in Mn{sub 3}Ni{sub 1−x}Cu{sub x}N (x = 0, 0.3, 0.5, 0.7, 1.0) was extensively investigated. We observed that the Cu-doping at the Ni site complicated the magnetic ground states, which induced the competition of antiferromagnetic and ferromagnetic interactions. Spin-glass-like behavior, arising from possible site-randomness and competing interactions of magnetism, was observed in compounds with x = 0.3, 0.5, and 0.7, and typically discussed by means of the measurement of ac magnetic susceptibility for x = 0.7. The negative thermal expansion (NTE) behavior, due to the magnetic ordering transition, was observed in Mn{sub 3}Ni{sub 1−x}Cu{sub x}N compounds using variable temperature x-ray diffraction. It reveals that the introduction of Cu effectively broadens the temperature range displaying negative thermal expansion. The relationship between the local lattice distortion and the competing magnetic ground states might play an important role in broadening the NTE temperature range in this antiperovskite compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystallographic superstructure in R2PdSi3 (R = heavy rare earth) compounds

The R2PdSi3 intermetallic compounds have been reported to crystallize in a hexagonal AlB2- derived structure, with the rare earth atoms on the Al sites and Pd and Si atoms randomly distributed on the B sites. However, the intricate magnetic properties observed in the series of compounds have always suggested complications to the assumed structure. To clarify the situation, x-ray and neutron diffraction measurements were performed on the heavy rare earth compounds with R = Gd, Tb, Dy, Ho, Er, Tm, which revealed the existence of a crystallographic superstructure. The superstructure features a doubled unit cell in the hexagonal basal plane and an octuplication along the perpendicular c direction with respect to the primitive cell. No structural transition was observed between 300 K and 1.5 K. Extended x-ray absorption fine structure (EXAFS) analysis as well as density functional theory (DFT) calculations were utilized to investigate the local environments of the respective atoms. In this article the various experimental results will be presented and it will be shown that the superstructure is mainly due to the Pd-Si order on the B sites. A structure model will be proposed to fully describe the superstructure of Pd-Si order in R2PdSi3. The connection between the crystallographic superstructure and the magnetic properties will be discussed in the framework of the presented model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Physical properties and phase diagram of the magnetic compound Cr{sub 0.26}NbS{sub 1.74} at high pressures

We report the results of a study of magnetic, electrical, and thermodynamic properties of a single crystal of the magnetic compound Cr{sub 0.26}NbS{sub 1.74} at ambient and high pressures. Results of the measurements of magnetization as a function of temperature reveal the existence of a ferromagnetic phase transition in Cr{sub 0.26}NbS{sub 1.74}. The effective number of Bohr magnetons per Cr atom in the paramagnetic phase of Cr{sub 0.26}NbS{sub 1.74} is µ{sub eff} ≈ 4.6µB, which matches the literature data for Cr1/3NbS2. Similarly, the effective number of Bohr magnetons per Cr atom in the saturation fields is rather close in both substances and corresponds to the number of magnetons in the Cr{sup +3} ion. In contrast to the stoichiometric compound, Cr{sub 0.26}NbS{sub 1.74} does not show a metamagnetic transition, that indicates the lack of a magnetic soliton. A high-pressure phase diagram of the compound reveals the quantum phase transition at T = 0 and P ≈ 4.2 GPa and the triple point situated at T ≈ 20 K and P ≈ 4.2 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-Temperature Specific Heat of the TmBiGeO{sub 5} and YbBiGeO{sub 5} Compounds

The TmBiGeO{sub 5} and YbBiGeO{sub 5} compounds have been synthesized from Tm{sub 2}O{sub 3} (Yb{sub 2}O{sub 3}), Bi{sub 2}O{sub 3}, and GeO{sub 2} oxides by the solid-state synthesis with successive burning at 1003, 1073, 1123, 1143, 1173, and 1223 K. High-temperature specific heat of the oxide compounds has been measured by differential scanning calorimetry. Basing on the experimental dependences C{sub p} = f(T), the thermodynamic properties of the oxide compounds, i.e., the enthalpy and entropy variations, have been calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗