Search NASA⌕ Search

SEARCH · Search NASA

Results for “continuum modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

A continuum analysis of chemical nonequilibrium under hypersonic low-density flight conditions

Results of employing the continuum model of Navier-Stokes equations under the low-density flight conditions are presented. These results are obtained with chemical nonequilibrium and multicomponent surface slip boundary conditions. The conditions analyzed are those encountered by the nose region of the Space Shuttle Orbiter during reentry. A detailed comparison of the Navier-Stokes (NS) results is made with the viscous shock-layer (VSL) and direct simulation Monte Carlo (DSMC) predictions. With the inclusion of new surface-slip boundary conditions in NS calculations, the surface heat transfer and other flowfield quantities adjacent to the surface are predicted favorably with the DSMC calculations from 75 km to 115 km in altitude. This suggests a much wider practical range for the applicability of Navier-Stokes solutions than previously thought. This is appealing because the continuum (NS and VSL) methods are commonly used to solve the fluid flow problems and are less demanding in terms of computer resource requirements than the noncontinuum (DSMC) methods.

Gupta, R. N.↗

Time-dependent non-equilibrium dielectric response in QM/continuum approaches

The Polarizable Continuum Models (PCMs) are some of the most inexpensive yet successful methods for including the effects of solvation in quantum-mechanical calculations of molecular systems. However, when applied to the electronic excitation process, these methods are restricted to dichotomously assuming either that the solvent has completely equilibrated with the excited solute charge density (infinite-time limit), or that it retains the configuration that was in equilibrium with the solute prior to excitation (zero-time limit). This renders the traditional PCMs inappropriate for resolving time-dependent solvent effects on non-equilibrium solute electron dynamics like those implicated in the instants following photoexcitation of a solvated molecular species. To extend the existing methods to this non-equilibrium regime, we herein derive and apply a new formalism for a general time-dependent continuum embedding method designed to be propagated alongside the solute’s electronic degrees of freedom in the time domain. Given the frequency-dependent dielectric constant of the solvent, an equation of motion for the dielectric polarization is derived within the PCM framework and numerically integrated simultaneously with the time-dependent Hartree fock/density functional theory equations. Results for small molecular systems show the anticipated dipole quenching and electronic state dephasing/relaxation resulting from out-of-phase charge fluctuations in the dielectric and embedded quantum system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Axial Tensile Failure Analysis of SiC{sub f}/Ti Composite Based on Continuum Cohesive Zone Model

In this paper, the failure behavior of SiC fiber-reinforced Ti-6Al-4V matrix composite (SiC{sub f}/Ti) under longitudinal loads was studied experimentally and theoretically. Experimental results show that the interface of SiC{sub f}/Ti composite is continuous and integral. Through SEM observations, it was found that transverse matrix cracks initiated from the debonding region of the interface. A three-dimensional representative volume element was developed to simulate the failure process of SiC{sub f}/Ti-6Al-4V composite. A continuum cohesive zone model is employed to describe the debonding behavior at the interface, compared with a discrete one. More accurate simulated results were obtained by a continuum cohesive zone model, corresponding to experimental results. The transverse cracking behavior of the matrix was simulated. The stress–strain curves predicted by the continuum cohesive zone model show a good agreement with the experimental results. The fiber volume fraction, interface strength and interface toughness are investigated to exhibit their influences upon the longitudinal mechanical characteristics of SiC{sub f}/Ti-6Al-4V composite.

36 MATERIALS SCIENCE↗

Multiscale modeling-enabled design of multifunctional composites

This study aims to create a comprehensive model that considers multiple scales and physics for predicting the electromechanical behavior of fiber-reinforced composites enhanced with barium titanate (BaTiO3). In our earlier work, we have demonstrated that depositing BaTiO3 microparticles of 200-nm-diameter, on fiber surfaces during fiber-reinforced composite fabrication enhances mechanical strength, passive self-sensing, and energy harvesting properties. The key is to carefully control the microparticle concentration to prevent agglomeration. Since the particles are micron-sized, understanding how agglomeration affects the composites' electromechanical properties is crucial for guiding such multifunctional materials’ design. This study introduces a micromechanics-based approach to explore the impact of microparticle dispersion on the bulk composites' electromechanical properties. Insights gained from this investigation are applied in experiments, enabling accurate predictions of mechanical and self-sensing responses in BaTiO3-enhanced fiber-reinforced composites. Micro-level findings from this computational approach can be integrated into larger continuum models to comprehensively capture the electromechanical behavior of the composite structures at bulk scale. The proposed model is validated by comparing predictions with experimental results, accounting for the nonlinear mechanical and electromechanical behaviors of constituent materials. Consequently, this computational model serves as a digital platform for efficiently designing multifunctional composites.

Gupta, Sumit↗

Magnus induced diode effect for skyrmions in channels with periodic potentials

Using a particle based model, we investigate the skyrmion dynamical behavior in a channel where the upper wall contains divots of one depth and the lower wall contains divots of a different depth. Under an applied driving force, skyrmions in the channels move with a finite skyrmion Hall angle that deflects them toward the upper wall for -x direction driving and the lower wall for +x direction driving. When the upper divots have zero height, the skyrmions are deflected against the flat upper wall for -x direction driving and the skyrmion velocity depends linearly on the drive. For +x direction driving, the skyrmions are pushed against the lower divots and become trapped, giving reduced velocities and a nonlinear velocity-force response. When there are shallow divots on the upper wall and deep divots on the lower wall, skyrmions get trapped for both driving directions; however, due to the divot depth difference, skyrmions move more easily under -x direction driving, and become strongly trapped for +x direction driving. Further, the preferred -x direction motion produces what we call a Magnus diode effect since it vanishes in the limit of zero Magnus force, unlike the diode effects observed for asymmetric sawtooth potentials. We show that the transport curves can exhibit a series of jumps or dips, negative differential conductivity, and reentrant pinning due to collective trapping events. We also discuss how our results relate to recent continuum modeling on a similar skyrmion diode system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Revisiting stellar properties of star-forming galaxies with stellar and nebular spectral modelling

Spectral synthesis is a powerful tool for interpreting the physical properties of galaxies by decomposing their spectral energy distributions (SEDs) into the main luminosity contributors (e.g. stellar populations of distinct age and metallicity or ionised gas). However, the impact nebular emission has on the inferred properties of star-forming (SF) galaxies has been largely overlooked over the years, with unknown ramifications to the current understanding of galaxy evolution. The objective of this work is to estimate the relations between stellar properties (e.g. total mass, mean age, and mean metallicity) of SF galaxies by simultaneously fitting the stellar and nebular continua and comparing them to the results derived through the more common purely stellar spectral synthesis approach. The main galaxy sample from SDSS DR7 was analysed with two distinct population synthesis codes: FADO, which estimates self-consistently both the stellar and nebular contributions to the SED, and the original version of STARLIGHT, as representative of purely stellar population synthesis codes. Differences between codes regarding average mass, mean age and mean metallicity values can go as high as ~0.06 dex for the overall population of galaxies and ~0.12 dex for SF galaxies (galaxies with EW(Hα) > 3 Å), with the most prominent difference between both codes in the two populations being in the light-weighted mean stellar age. FADO presents a broader range of mean stellar ages and metallicities for SF galaxies than STARLIGHT, with the latter code preferring metallicity solutions around the solar value (Z ⊙ = 0.02). A closer look into the average light- and mass-weighted star formation histories of intensively SF galaxies (EW(Hα) > 75 Å) reveals that the light contributions of simple stellar populations (SSPs) younger than ≤10 7 (10 9 ) years in STARLIGHT are higher by ~5.41% (9.11%) compared to FADO. Moreover, FADO presents higher light contributions from SSPs with metallicity ≤ Z ⊙ /200 (Z ⊙ /50) of around 8.05% (13.51%) when compared with STARLIGHT. This suggests that STARLIGHT is underestimating the average light-weighted age of intensively SF galaxies by up to ~0.17 dex and overestimating the light-weighted metallicity by up to ~0.13 dex compared to FADO (or vice versa). The comparison between the average stellar properties of passive, SF and intensively SF galaxy samples also reveals that differences between codes increase with increasing EW(Hα) and decreasing total stellar mass. Moreover, comparing SF results from FADO in a purely stellar mode with the previous results qualitatively suggests that differences between codes are primarily due to mathematical and statistical differences and secondarily due to the impact of the nebular continuum modelling approach (or lack thereof). However, it is challenging to adequately quantify the relative role of each factor since they are likely interconnected. This work finds indirect evidence that a purely stellar population synthesis approach negatively impacts the inferred stellar properties (e.g. mean age and mean metallicity) of galaxies with relatively high star formation rates (e.g. dwarf spirals, ‘green peas’, and starburst galaxies). In turn, this can bias interpretations of fundamental relations such as the mass-age or mass-metallicity, which are factors worth bearing in mind in light of future high-resolution spectroscopic surveys at higher redshifts (e.g. MOONS and 4MOST-4HS).

79 ASTRONOMY AND ASTROPHYSICS↗

Chemo‐Mechanical Coupling in Hydrogels: Dynamics in the Diffusion‐Limited Regime

Hydrogels are characterized by substantial volume changes in response to external stimuli, making them promising candidates for developing smart materials with enhanced adaptability and responsiveness. By integrating chemical reactions, hydrogels acquire dynamic and tunable responsiveness to external stimuli through chemo‐mechanical coupling, expanding their potential in emerging applications. However, capturing their transient behavior remains challenging due to the complex interplay of chemical reactions, solvent transport, and polymer network deformation. Classical theories capture equilibrium swelling but fail to describe time‐dependent phenomena. To address this, a time‐dependent continuum model is developed that explicitly couples these processes. Volume phase transition in hydrogels with homogeneous chemical reactions is investigated, then the effects of reaction kinetics on these transitions are analyzed. The coupling of these mechanisms is further explored through a study of transient mechanical instabilities. To illustrate the impact of distinct reaction and diffusion timescales, a photo‐active gripper is studied for robotic applications. Finally, a photo‐active microswimmer that exhibits non‐reciprocal motion is proposed to highlight the solvent diffusion for locomotion at the micro‐ and nano‐ scales. The work establishes that transient dynamics of chemo‐mechanical hydrogels generate functions not accessible by steady state models and provides a predictive platform for designing adaptive materials in emerging applications.

chemo-mechanical coupling↗

Experimental and Computational Analysis of the Solvent‐Dependent O 2 /Li + ‐O 2 − Redox Couple: Standard Potentials, Coupling Strength, and Implications for Lithium–Oxygen Batteries

Abstract Understanding and controlling the kinetics of O 2 reduction in the presence of Li + ‐containing aprotic solvents, to either Li + ‐O 2 − by one‐electron reduction or Li 2 O 2 by two‐electron reduction, is instrumental to enhance the discharge voltage and capacity of aprotic Li‐O 2 batteries. Standard potentials of O 2 /Li + ‐O 2 − and O 2 /O 2 − were experimentally measured and computed using a mixed cluster‐continuum model of ion solvation. Increasing combined solvation of Li + and O 2 − was found to lower the coupling of Li + ‐O 2 − and the difference between O 2 /Li + ‐O 2 − and O 2 /O 2 − potentials. The solvation energy of Li + trended with donor number (DN), and varied greater than that of O 2 − ions, which correlated with acceptor number (AN), explaining a previously reported correlation between Li + ‐O 2 − solubility and DN. These results highlight the importance of the interplay between ion–solvent and ion–ion interactions for manipulating the energetics of intermediate species produced in aprotic metal–oxygen batteries.

Kwabi, David G.↗

Druckeffekte auf organische Reaktionen in Fluiden – eine neue theoretische Perspektive

Abstract Dieser Aufsatz zeigt eine neue Perspektive für die Untersuchung chemischer Reaktionen in komprimierten flüssigen Medien auf. Wir beginnen, indem wir die wesentlichen Einsichten zusammenfassen, die in über 50 Jahren experimenteller Studien an organischen Reaktionen in Lösung unter Druck gewonnen wurden. Diese Arbeiten führten zu einer zuverlässigen Beurteilung der kritischen Rolle der Aktivierungs‐ (Δ ≠ V) und Reaktionsvolumen (ΔV) beim Verständnis von Druckeffekten auf Geschwindigkeiten und Gleichgewichte organischer Reaktionen. Eine kürzlich entwickelte Computermethode, die XP‐PCM‐Methode (XP‐PCM=extreme pressure polarizable continuum model), die quantenchemische Berechnungen von Reaktionswegen von Molekülen unter Druck vornehmen kann, wird eingeführt. Eine Fallstudie der Diels‐Alder‐Cycloaddition von Cyclopentadien mit Ethylen soll – in pädagogischem Detail – der Beschreibung der Methode dienen. Anschließend wenden wir die XP‐PCM‐Methode auf eine Auswahl anderer pericyclischer Reaktionen an, einschließlich der Diels‐Alder‐Cycloaddition von Butadien mit Ethylen, der elektrocyclischen Ringöffnung von Cyclobuten, dem elektrocyclischen Ringschluss von Z‐Hexatrien, der [1,5]‐H‐Verschiebung in Z‐Pentadien und der Cope‐Umlagerung. Diese Reaktionen dienen als Beispiele für einige der häufigsten Kombinationen von Δ ≠ V und ΔV. Interessante Phänomene, wie die Verschiebung eines Übergangszustands entlang der Reaktionskoordinate, ein Wechsel des geschwindigkeitsbestimmenden Schrittes und die mögliche Umwandlung eines Übergangszustands in ein stabiles Minimum, werden durch diese Berechnungen aufgedeckt. Ein Profil des Reaktionsvolumens, entsprechend der Änderung des Volumens des reagierenden Moleküls im Verlauf der Reaktion, erweist sich als nützlich.

Chen, Bo↗

Experimental and Computational Analysis of the Solvent‐Dependent O 2 /Li + ‐O 2 − Redox Couple: Standard Potentials, Coupling Strength, and Implications for Lithium–Oxygen Batteries

Abstract Understanding and controlling the kinetics of O 2 reduction in the presence of Li + ‐containing aprotic solvents, to either Li + ‐O 2 − by one‐electron reduction or Li 2 O 2 by two‐electron reduction, is instrumental to enhance the discharge voltage and capacity of aprotic Li‐O 2 batteries. Standard potentials of O 2 /Li + ‐O 2 − and O 2 /O 2 − were experimentally measured and computed using a mixed cluster‐continuum model of ion solvation. Increasing combined solvation of Li + and O 2 − was found to lower the coupling of Li + ‐O 2 − and the difference between O 2 /Li + ‐O 2 − and O 2 /O 2 − potentials. The solvation energy of Li + trended with donor number (DN), and varied greater than that of O 2 − ions, which correlated with acceptor number (AN), explaining a previously reported correlation between Li + ‐O 2 − solubility and DN. These results highlight the importance of the interplay between ion–solvent and ion–ion interactions for manipulating the energetics of intermediate species produced in aprotic metal–oxygen batteries.

Kwabi, David G.↗

The Effect of Pressure on Organic Reactions in Fluids-a New Theoretical Perspective

This Review brings a new perspective to the study of chemical reactions in compressed fluid media. We begin by reviewing the substantial insight gained from more than 50 years of experimental studies on organic reactions in solution under pressure. These led to a proper estimation of the critical roles of volume of activation (Δ ≠ V) and reaction volume (ΔV) in understanding pressure effect on rates and equilibria of organic reactions. A recently developed computational method, the XP-PCM (extreme pressure polarizable continuum model) method, capable of carrying out quantum mechanical calculations of reaction pathways of molecules under pressure, is introduced. A case study of the Diels–Alder cycloaddition of cyclopentadiene with ethylene serves, in pedagogical detail, to describe the methodology. We then apply the XP-PCM method to a selection of other pericyclic reactions, including the parent Diels–Alder cycloaddition of butadiene with ethylene, electrocyclic ring-opening of cyclobutene, electrocyclic ring-closing of Z-hexatriene, the [1,5]-H shift in Z-pentadiene, and the Cope rearrangement. These serve as examples of some of the most common combinations of Δ ≠ V and ΔV. Interesting phenomena such as a shift in a transition state along a reaction coordinate, a switch of rate-determining step, and the possible turning of a transition state into a stable minimum are revealed by the calculations. A reaction volume profile, the change in the volume of the reacting molecules as the reaction proceeds, emerges as being useful.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Anion Identity and Concentration on Electrochemical Reduction of CO 2

The electrochemical reduction of CO 2 is known to be influenced by the concentration and identity of the anionic species in the electrolyte; however, a full understanding of this phenomenon has not been developed. Here, we present the results of experimental and computational studies aimed at understanding the role of electrolyte anions on the reduction of CO 2 over Cu surfaces. Experimental studies were performed to show the effects of bicarbonate buffer concentration and the composition of other buffering anions on the partial currents of the major products formed by reduction of CO 2 over Cu. It was demonstrated that the composition and concentration of electrolyte anions has relatively little effect on the formation of CO, HCOO - , C 2 H 4 , and CH 3 CH 2 OH, but has a significant effect on the formation of H 2 and CH 4 . Continuum modeling was used to assess the effects of buffering anions on the pH at the electrode surface. The influence of pH on the activity of Cu for producing H 2 and CH 4 was also considered. Changes in the pH near the electrode surface were insufficient to explain the differences in activity and selectivity observed with changes in anion buffering capacity observed for the formation of H 2 and CH 4 . Therefore, it is proposed that these differences are the result of the ability of buffering anions to donate hydrogen directly to the electrode surface and in competition with water. The effectiveness of buffering anions to serve as hydrogen donors is found to increase with decreasing p K a of the buffering anion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multithreaded parallelization of the energy and analytic gradient in the fragment molecular orbital method

The fragment molecular orbital method in GAMESS is parallelized in a multithreaded OpenMP implementation combined with the MPI version of the two-level generalized distributed data interface. The energy and analytic gradient in gas phase and the polarizable continuum model of solvation are parallelized in this hybrid three-level scheme, achieving a large memory footprint reduction and a high parallel efficiency on Intel Xeon Phi processors. The parallel efficiency is demonstrated on the Stampede2 and Theta supercomputers using up to 2048 nodes (262 144 threads).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydro-mechanically coupled finite-element analysis of the stability of a fractured-rock slope using the equivalent continuum approach: a case study of planned reservoir banks in Blaubeuren, Germany

Construction works associated with the building of reservoirs in mountain areas can damage the stability of adjacent valley slopes. Seepage processes caused by the filling and drawdown operations of reservoirs also affect the stability of the reservoir banks over time. The presented study investigates the stability of a fractured-rock slope subjected to seepage forces in the lower basin of a planned pumped-storage hydropower (PSH) plant in Blaubeuren, Germany. The investigation uses a hydro-mechanically coupled finite-element analyses. For this purpose, an equivalent continuum model is developed by using a representative elementary volume (REV) approach. To determine the minimum required REV size, a large number of discrete fracture networks are generated using Monte Carlo simulations. These analyses give a REV size of 28 × 28 m, which is sufficient to represent the equivalent hydraulic and mechanical properties of the investigated fractured-rock mass. The hydro-mechanically coupled analyses performed using this REV size show that the reservoir operations in the examined PSH plant have negligible effect on the adjacent valley slope.

58 GEOSCIENCES↗

Influence of Solvent and Electric Field on the Structure and IR, {sup 31}P NMR Spectroscopic Properties of a Titanocene–Benzyne Complex

The effect of solvent on the structural, frontier orbital energies, global density-based descriptors, vibrational frequencies, and {sup 31}P NMR chemical shifts was examined for the syn-Cp{sub 2}Ti(η{sup 2}-C{sub 6}H{sub 4}-2-OMe)(PMe{sub 3}) complex by the self-consistent reaction field theory (SCRF) based on the polarizable continuum model (PCM). The studied spectroscopic parameters were correlated with the Kirkwood–Bauer–Magat (KBM) equation. Also, the response of the global density-based descriptors (chemical potential and hardness) in the presence of external electric field was studied. EDA, QTAIM, ELF, LOL, and NBO analyses were used for illustration of the Ti–C bond in this complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Valley Hall Effect and Magnetic Moment in Magnetized Silicene

We investigate the physical properties of silicene with both staggered sublattice potential and magnetization by using Kubo formalism, the latter arises from the magnetic proximity effect by depositing Fe atoms to silicene or depositing silicene on an appropriate ferromagnetic insulator. Based on the low-energy continuum model of the system where inversion symmetry is broken, we show that the system exhibits spin half metal state when staggered sublattice potential is in the same magnitude with mean and staggered magnetization. Besides, Hall conductivity and magnetic moment are all valley dependent, so we investigate the valley Hall effect of the system further by considering magnetization exclusively. This means carriers in different valleys turning into opposite directions transverse to an in-plane electric field. At last, we prove these results by investigating Berry curvature that characterizing Hall transport, which is also valley dependent. These effects can be used to generate valley-polarized currents solely by magnetization, forming the basis for the valley-based electronics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular Statics Analyses of Thermodynamics and Kinetics of Hydrogen Cottrell Atmosphere Formation Around Edge Dislocations in Aluminum

Aluminum alloys are being explored as lightweight structural materials for use in hydrogen-containing environments. In this paper, to understand hydrogen effects on deformation, we perform molecular statics studies of the hydrogen Cottrell atmosphere around edge dislocations in aluminum. First, we calculate the hydrogen binding energies at all interstitial sites in a periodic aluminum crystal containing an edge dislocation dipole. This allows us to use the Boltzmann equation to quantify the hydrogen Cottrell atmosphere. Based on these binding energies, we then construct a continuum model to study the kinetics of the hydrogen Cottrell atmosphere formation. Finally, we compare our results with existing theories and discuss the effects of hydrogen on deformation of aluminum-based alloys.

36 MATERIALS SCIENCE↗

Simulation of the interaction between an edge dislocation and a ⟨1 0 0⟩ interstitial dislocation loop in α-iron

Atomic-level simulations are used to investigate the interaction of an edge dislocation with ⟨100⟩ interstitial dislocation loops in α-iron at 300 K. Dislocation reactions are studied systematically for different loop positions and Burgers vector orientations, and results are compared for two different interatomic potentials. Reactions are wide-ranging and complex, but can be described in terms of conventional dislocation reactions in which Burgers vector is conserved. The fraction of interstitials left behind after dislocation breakaway varies from 25 to 100%. The nature of the reactions requiring high applied stress for breakaway is identified. The obstacle strengths of ⟨100⟩ loops, 1/2 ⟨111⟩ loops and voids containing the same number (169) of point defects are compared. ⟨100⟩ loops with Burgers vector parallel to the dislocation glide plane are slightly stronger than ⟨100⟩ and 1/2 ⟨111⟩ loops with inclined Burgers vector: voids are about 30% weaker than the stronger loops. However, small voids are stronger than small 1/2 ⟨111⟩ loops. The complexity of some reactions and the variety of obstacle strengths poses a challenge for the development of continuum models of dislocation behaviour in irradiated iron.

36 MATERIALS SCIENCE↗