Search NASA⌕ Search

SEARCH · Search NASA

Results for “controller area network”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Internet Protocol Enhanced over Satellite Networks

Extensive research conducted by the Satellite Networks and Architectures Branch of the NASA Lewis Research Center led to an experimental change to the Internet's Transmission Control Protocol (TCP) that will increase performance over satellite channels. The change raises the size of the initial burst of data TCP can send from 1 packet to 4 packets or roughly 4 kilobytes (kB), whichever is less. TCP is used daily by everyone on the Internet for e-mail and World Wide Web access, as well as other services. TCP is one of the feature protocols used in computer communications for reliable data delivery and file transfer. Increasing TCP's initial data burst from the previously specified single segment to approximately 4 kB may improve data transfer rates by up to 27 percent for very small files. This is significant because most file transfers in wide-area networks today are small files, 4 kilobytes or less. In addition, because data transfers over geostationary satellites can take 5 to 20 times longer than over typical terrestrial connections, increasing the initial burst of data that can be sent is extremely important. This research along with research from other institutions has led to the release of two new Request for Comments from the Internet Engineering Task Force (IETF, the international body that sets Internet standards). In addition, two studies of the implications of this mechanism were also funded by NASA Lewis.

Ivancic, William D.↗

Aspects of Voyager photogrammetry

In January 1986, Voyager 2 took a series of pictures of Uranus and its satellites with the Imaging Science System (ISS) on board the spacecraft. Based on six stereo images from the ISS narrow-angle camera, a topographic map was compiled of the Southern Hemisphere of Miranda, one of Uranus' moons. Assuming a spherical figure, a 20-km surface relief is shown on the map. With three additional images from the ISS wide-angle camera, a control network of Miranda's Southern Hemisphere was established by analytical photogrammetry, producing 88 ground points for the control of multiple-model compilation on the AS-11AM analytical stereoplotter. Digital terrain data from the topographic map of Miranda have also been produced. By combining these data and the image data from the Voyager 2 mission, perspective views or even a movie of the mapped area can be made. The application of these newly developed techniques to Voyager 1 imagery, which includes a few overlapping pictures of Io and Ganymede, permits the compilation of contour maps or topographic profiles of these bodies on the analytical stereoplotters.

Wu, Sherman S. C.↗

An Adaptive Approach to Energy Security and Assurance

The North American power network has been called the world s largest, most complex machine. This network represents an enormous continent-wide investment, including over 15,000 generators in 10,000 power plants, and miles of transmission lines, distribution networks, and control systems. It has long been recognized that existing power-delivery systems are vulnerable to natural disasters and adversarial attack. The next generation of control systems must simultaneously protect against these disruptions while integrating new generation sources and maintaining active, automated control of the grid. The grid s interconnectedness needed to provide smart grid control also increases its vulnerability to interconnect-wide disruptions that are initiated locally. While strong centralized control is essential to reliable operations, this control requires multiple, high-data-rate, two-way communication links, a powerful central computing facility, and an elaborate operation-control center, all of which present vulnerabilities. It is clearly impossible to completely protect such a widespread and complex system. The key to maintaining the integrity of this network lies in the ability to identify its critical elements and to then effectively protect these elements. This identification and targeted protection will enable parts of the network to remain operational and even automatically reconfigure in the event of local failures or threats of failure, providing dependable continuity of service. The bold concept proposed here is the communication, predictive models and fast controls that eliminate the need to protect all components from emergent contingencies, but to reconfigure actively to maintain critical functions. The transformation from laboratory applications to larger than micro grid areas will require the next generation of energy technologies.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Next Steps: Laying the Groundwork for Bundle Protocol v7

Delay/Disruption Tolerant Networking (DTN) is a networking model and protocol suite that extends the terrestrial internet to the challenging communication environments of space. These environments are typically subject to frequent disruptions, which can cause delays or errors. DTN protects data transmission by wrapping data into bundles (similar to Internet Protocol packets), storing them until a connection can be established between two nodes (similar to terrestrial routers or computers), and forwarding them to their destinations. Bundle Protocol (BP) is responsible for generating those bundles and creates the transport layer of DTN, much like how Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) create the transport layer of the Internet Protocol. BPv6 is the current, accepted version of the Bundle Protocol standard. However, recent missions and test implementations have revealed missing components and areas for improvement in the standard. Using lessons learned from NASA missions and gathering inspiration from the Internet Protocol, BPv7 is intended to be a more robust Bundle Protocol that improves upon its predecessor and increases the technology readiness level of the DTN architecture. The DTN Standard Interface Design team, a sub-team of the DTN Infusion Project at the Goddard Space Flight Center, worked to create a dictionary of terms for bundle components and functional decomposition of the protocol. These efforts aided in the standardization of BP interfaces, something missing from BPv6, and supported parallel network management and configuration work. This standardization will ultimately contribute to LunaNet (a lunar communications and navigation architecture that will bring networking, positioning, navigation, timing and science services to the Moon), the Solar System Internet (SSI), and expand crewed and uncrewed space exploration opportunities.

DTN↗

Next Steps: Laying the Groundwork for Bundle Protocol v7

Delay/Disruption Tolerant Networking (DTN) is a networking model and protocol suite that extends the terrestrial internet to the challenging communication environments of space. These environments are typically subject to frequent disruptions, which can cause delays or errors. DTN protects data transmission by wrapping data into bundles (similar to Internet Protocol packets), storing them until a connection can be established between two nodes (similar to terrestrial routers or computers), and forwarding them to their destinations. Bundle Protocol (BP) is responsible for generating those bundles and creates the transport layer of DTN, much like how Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) create the transport layer of the Internet Protocol. BPv6 is the current, accepted version of the Bundle Protocol standard. However, recent missions and test implementations have revealed missing components and areas for improvement in the standard. Using lessons learned from NASA missions and gathering inspiration from the Internet Protocol, BPv7 is intended to be a more robust Bundle Protocol that improves upon its predecessor and increases the technology readiness level of the DTN architecture. The DTN Standard Interface Design team, a sub-team of the DTN Infusion Project at the Goddard Space Flight Center, worked to create a dictionary of terms for bundle components and functional decomposition of the protocol. These efforts aided in the standardization of BP interfaces, something missing from BPv6, and supported parallel network management and configuration work. This standardization will ultimately contribute to LunaNet (a lunar communications and navigation architecture that will bring networking, positioning, navigation, timing and science services to the Moon), the Solar System Internet (SSI), and expand crewed and uncrewed space exploration opportunities.

dtn↗

Designing Porous Ion Emitters for Thermal Ionization Mass Spectrometry: Evaluating Metal-Organic Frameworks

In this work we describe the first exploration of metal-organic frameworks (MOFs) as ‘next generation’ ion emitters for thermal ionization mass spectrometry (TIMS). MOFs were identified as promising candidates for this application given the synthetic control over their desired structural properties. This tunability results in well-ordered, high surface area, high porosity frameworks with targeted sorption affinities. Here we explored an aluminum-based, bipyridine-containing MOF (MOF-253) with and without incorporating the high work function metal, rhenium (Re). After analysis of a Nd-bearing MOF, we hypothesized that the well-dispersed, sponge-like interconnected network of the degraded structure would enhance Nd ionization more than traditional TIMS loading activators (i.e., phosphoric acid). Compared to filaments loaded with phosphoric acid that require an additional benzene carburization step, the Nd ionization efficiencies (atoms detected relative to atoms loaded) for heated filaments loaded with MOF-253 were similar (~1%). Electron microscopy after TIMS analysis demonstrated that the MOF was retained on the filament and, as hypothesized, preserved sub-micron porosity post analysis. While these results are preliminary, they demonstrate that MOFs have potential to enhance ionization and exceed the performance of traditional loading techniques by forming nano-porous ion emitters (nano-PIEs). Thus, further experimentation is likely to exceed this performance through more specific selection of the base MOF structure and modifications to porosity and composition. This work represents a novel application of MOFs and a next step in the pursuit of advanced thermal ionization with potential to expand across the periodic table.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wind/PV Generation for Frequency Regulation and Oscillation Damping in the Eastern Interconnection

This report presents the control of renewable energy sources, including the variable-speed wind generators and solar photovoltaic (PV) generators, for frequency regulation and inter-area oscillation damping in the U.S. Eastern Interconnection (EI). In this report, based on the user-defined wind/PV generator electrical control model and the 16,000-bus Eastern Interconnection dynamic model, the additional controllers for frequency regulation and inter-area oscillation damping are developed and incorporated and the potential contributions of renewable energy sources to the EI system frequency regulation and inter-area oscillation damping are evaluated.

14 SOLAR ENERGY↗

Protecting intellectual property in space; Proceedings of the Aerospace Computer Security Conference, McLean, VA, March 20, 1985

The primary purpose of the Aerospace Computer Security Conference was to bring together people and organizations which have a common interest in protecting intellectual property generated in space. Operational concerns are discussed, taking into account security implications of the space station information system, Space Shuttle security policies and programs, potential uses of probabilistic risk assessment techniques for space station development, key considerations in contingency planning for secure space flight ground control centers, a systematic method for evaluating security requirements compliance, and security engineering of secure ground stations. Subjects related to security technologies are also explored, giving attention to processing requirements of secure C3/I and battle management systems and the development of the Gemini trusted multiple microcomputer base, the Restricted Access Processor system as a security guard designed to protect classified information, and observations on local area network security.

Source record↗

Coding for reliable satellite communications

This research project was set up to study various kinds of coding techniques for error control in satellite and space communications for NASA Goddard Space Flight Center. During the project period, researchers investigated the following areas: (1) decoding of Reed-Solomon codes in terms of dual basis; (2) concatenated and cascaded error control coding schemes for satellite and space communications; (3) use of hybrid coding schemes (error correction and detection incorporated with retransmission) to improve system reliability and throughput in satellite communications; (4) good codes for simultaneous error correction and error detection, and (5) error control techniques for ring and star networks.

Gaarder, N. T.↗

A Cyber-Physical Anomaly Detection for Wide-Area Protection Using Machine Learning

Wide-area protection scheme (WAPS) provides system-wide protection by detecting and mitigating small and large-scale disturbances that are difficult to resolve using local protection schemes. As this protection scheme is evolving from a substation-based distributed remedial action scheme (DRAS) to the control center-based centralized RAS (CRAS), it presents severe challenges to their cybersecurity because of its heavy reliance on an insecure grid communication, and its compromise would lead to system failure. This article presents an architecture and methodology for developing a cyber-physical anomaly detection system (CPADS) that utilizes synchrophasor measurements and properties of network packets to detect data integrity and communication failure attacks on measurement and control signals in CRAS. The proposed machine leaning-based methodology applies a rules-based approach to select relevant input features, utilizes variational mode decomposition (VMD) and decision tree (DT) algorithms to develop multiple classification models, and performs final event identification using a rules-based decision logic. Here, we have evaluated the proposed methodology of CPADS using the IEEE 39 bus system for several performance measures (accuracy, recall, precision, and F-measure) in a cyber-physical testbed environment. Furthermore, our experimental results reveal that the proposed algorithm (VMD-DT) of CPADS outperforms the existing machine learning classifiers during noisy and noise-free measurements while incurring an acceptable processing overhead.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Maritime Interdiction Operations Small Craft Detection

The Naval Postgraduate School has been conducting Tactical Network Topology (TNT) Maritime Interdiction Operations (MIO) experiments with Lawrence Livermore National Laboratory (LLNL) since early in 2005. In this work, we are investigating cutting edge technology to evaluate use of networks, advanced sensors and collaborative technology for globally-supported maritime interdiction operations. Some examples of our research include communications in harsh environments, between moving ships at sea; small boat drive-by radiation detection; network-centric collaboration with global partners; situational awareness; prototype sensors & biometric instruments. Since 2006, we have studied the concept of using a small vessel with fixed radiation sensors to do initial searches for illicit radioactive materials. In our work, we continue to evaluate concepts of operation for small boat monitoring. For example, in San Francisco Bay we established a simulated choke point using two RHIBs. Each RHIB had a large sodium iodide radiation sensor on board, mounted on the side nearest to the passing potential target boats. Once detections were made, notification over the network prompted a chase RHIB also equipped with a radiation sensor to further investigate the potential target. We have also used an unmanned surface vessel (USV) carrying a radiation sensor to perform the initial discovery. The USV was controlled remotely and to drive by boats in different configurations. The potential target vessels were arranged in a line, as a choke point and randomly spaced in the water. Search plans were problematic when weather, waves and drift complicated the ability to stay in one place. A further challenge is to both detect and identify the radioactive materials during the drive-by. Our radiation detection system, ARAM, Adaptable Radiation Area Monitor, is able to detect, alarm and quickly identify plausible radionuclides in real time. We have performed a number of experiments to better understand parameters of vessel speed, time, shielding, and distance in this complex three-dimensional space. At the NMIOTC in September 2009, we employed a dual detector portal followed by a chase. In this event, the challenge was to maintain communications after a lapse. When the chase went past the line-of sight reach of the Tactical Operational Center's (TOC) antenna, with interference from a fortress island in Suda Bay, Wave Relay extended the network for continued observation. Sodium iodide radiation detectors were mounted on two Hellenic Navy SEAL fast boats. After making the detection one of the portal boats maintained line-of sight while the other pursued the target vessel. Network access via Wave Relay antennas was maintained until the conclusion of the chase scenario. Progress has been made in the detection of radioactive materials in the maritime environment. The progression of the TNT MIO experiments has demonstrated the potential of the hardware to solve the problems encountered in this physically challenging environment. There continue to be interesting opportunities for research and development. These experiments provide a variety of platforms and motivated participants to perform real-world testing as solutions are made available.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Digital Architecture Planning Model

As part of the U.S. Department of Energy’s Light Water Reactor Sustainability Program, the Digital Architecture (DA) Project focuses on providing a model that nuclear utilities can refer to when planning deployment of advanced technologies. The digital architecture planning model (DAPM) is the methodology for mapping power plant operational and support activities into a DA that unifies all data sources needed by the utilities to operate their plants. The DA is defined as a collection of information technology capabilities needed to support and integrate a wide spectrum of real-time digital capabilities for performance improvements of nuclear power plants. DA can be thought of as integration of the separate instrumentation and control and information systems already in place in nuclear power plants, which are brought together for the purpose of creating new levels of automation in plant work activities. A major objective in DAPM development was to survey all key areas that needed to be reviewed in order for a utility to make knowledgeable decisions regarding needs and plans to implement a DA at the plant. The development was done in two steps. First, researchers surveyed the nuclear industry in order to learn their near-term plans for adopting new advanced capabilities and implementing a network (i.e., wireless and wire) infrastructure throughout the plant, including the power block. Secondly, a literature review covering regulatory documents, industry standards, and technical research reports and articles was conducted. The objective of the review was to identify key areas to be covered by the DAPM, which included the following: 1. The need for a DA and its benefits to the plant 2. Resources required to implement the DA 3. Challenges that need to be addressed and resolved to implement the DA 4. Roles and responsibilities of the DA implementation plan. The DAPM was developed based on results from the survey and the literature review. Model development, including the survey results and conclusions made about the key areas during the literature review, are described in this report.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

De novo Nanopore read quality improvement using deep learning

BACKGROUND: Long read sequencing technologies such as Oxford Nanopore can greatly decrease the complexity of de novo genome assembly and large structural variation identification. Currently Nanopore reads have high error rates, and the errors often cluster into low-quality segments within the reads. The limited sensitivity of existing read-based error correction methods can cause large-scale mis-assemblies in the assembled genomes, motivating further innovation in this area. RESULTS: Here we developed a Convolutional Neural Network (CNN) based method, called MiniScrub, for identification and subsequent "scrubbing" (removal) of low-quality Nanopore read segments to minimize their interference in downstream assembly process. MiniScrub first generates read-to-read overlaps via MiniMap2, then encodes the overlaps into images, and finally builds CNN models to predict low-quality segments. Applying MiniScrub to real world control datasets under several different parameters, we show that it robustly improves read quality, and improves read error correction in the metagenome setting. Compared to raw reads, de novo genome assembly with scrubbed reads produces many fewer mis-assemblies and large indel errors. CONCLUSIONS: MiniScrub is able to robustly improve read quality of Oxford Nanopore reads, especially in the metagenome setting, making it useful for downstream applications such as de novo assembly. We propose MiniScrub as a tool for preprocessing Nanopore reads for downstream analyses. MiniScrub is open-source software and is available at https://bitbucket.org/berkeleylab/jgi-miniscrub .

59 BASIC BIOLOGICAL SCIENCES↗

2015 Geothermal Technologies Office Peer Review Summary: Energetic Materials for EGS Well Stimulation

The development of enhanced or engineered geothermal systems (EGS), by definition, includes an engineered approach to reservoir stimulation. EGS require an effective method of generating a high surface area network of fractures, or the stimulation of existing fractures, in a formation in order to increase permeability/heat-transfer. The most accepted methodologies include hydraulic fracturing and chemical stimulation. Alternative methods employing energetic materials have been employed for reservoir stimulation. For oil & gas reservoirs, this has been accomplished in the past with solid propellant gas generators and high explosives but the pressurization rate and final pressure cannot be controlled or easily adjusted in the field. Our program is investigating controlled and tailored rapid gas generation from solid, liquid and gaseous energetic formulations to operate in the chasm between conventional propellants and solid high explosives. This distinct solid, liquid and gas phase energetic materials approach has specific attributes and that could be used synergistically or individually to enhance a specific formation. This may prove to enhance the viability of using geothermal resources for power production. By employing optimized energetic materials we can tailor burn rates above propellant burn rates to optimize the gas generation rate without entering the excessive realm of the high pressures generated by high explosives. Gas phase energetic materials offer a unique method of tailoring reaction rate and final pressure. Again, rapid pressurization at rates, far exceeding quasi-static conventional hydraulic rates, can generate multiple radial wellbore fractures and potentially provide a mechanism to induce shear destabilization within the formation that enables the fractures to be self-propping. Multiple fractures from the wellbore allow efficient coupling to the existing formation fracture network. Furthermore, these techniques allow for repeated stimulations allowing fractures to be extended further. Controlled rate pressurization is a useful tool for the efficient implementation of EGS. This multi-phase approach to fracturing can eliminate the need for massive pumping equipment and the water required with conventional hydraulic fracturing methods. Additionally these methods use “green” materials with negligible environmental impact. These methods promise to be more economical than conventional stimulation techniques. Our objective is to develop a family of ideal candidate energetic systems for optimally stimulating a formation.

15 GEOTHERMAL ENERGY↗

Neural networks for modeling and control of particle accelerators

Charged particle accelerators support a wide variety of scientific, industrial, and medical applications. They range in scale and complexity from systems with just a few components for beam acceleration and manipulation, to large scientific user facilities that span many kilometers and have hundreds-to-thousands of individually-controllable components. Specific operational requirements must be met by adjusting the many controllable variables of the accelerator. Meeting these requirements can be challenging, both in terms of the ability to achieve specific beam quality metrics in a reliable fashion and in terms of the time needed to set up and maintain the optimal operating conditions. One avenue toward addressing this challenge is to incorporate techniques from the fields of machine learning (ML) and artificial intelligence (AI) into the way particle accelerators are modeled and controlled. While many promising approaches within AI/ML could be used for particle accelerators, this dissertation focuses on approaches based on neural networks. Neural networks are particularly well-suited to modeling, control, and diagnostic analysis of nonlinear systems, as well as systems with large parameter spaces. They are also very appealing for their ability to process high-dimensional data types, such as images and time series (both of which are ubiquitous in particle accelerators). In this work, key studies that demonstrated the potential utility of modern neural network-based approaches to modeling and control of particle accelerators are presented. The context for this work is important: at the start of this work in 2012, there was little interest in AI/ML in the particle accelerator community, and many of the advances in neural networks and deep learning that enabled its present success had not yet been made at that time. As such, this work was both an exploration of possible application areas and a generator of proof-of-concept demonstrations in these areas.

43 PARTICLE ACCELERATORS↗

CI Controls for Energy and Environment

Computational intelligence (CI) is a rapidly evolving field that utilizes life imitating metaphors for guiding model building including, but not limited to neural networks, fuzzy logic, genetic algorithms, artificial life, and hybrid CI paradigms. Although the boundaries between artificial intelligence (AI) and CI are not distinct, their research communities are separate and distinct. CI researchers tend to focus on processing numerical data from sensors, while the AI community generally relies on symbolic computing to capture human knowledge. In both areas, there is a great deal of interest and activity in hybrid systems that can offset the limitations of individual methods, extend their capabilities, and create new capabilities. Examples of the benefits that can accrue from hybrid systems are contained.

Biondo, Samuel J.↗

Hippocampal place cell instability after lesions of the head direction cell network

The occurrence of cells that encode spatial location (place cells) or head direction (HD cells) in the rat limbic system suggests that these cell types are important for spatial navigation. We sought to determine whether place fields of hippocampal CA1 place cells would be altered in animals receiving lesions of brain areas containing HD cells. Rats received bilateral lesions of anterodorsal thalamic nuclei (ADN), postsubiculum (PoS), or sham lesions, before place cell recording. Although place cells from lesioned animals did not differ from controls on many place-field characteristics, such as place-field size and infield firing rate, the signal was significantly degraded with respect to measures of outfield firing rate, spatial coherence, and information content. Surprisingly, place cells from lesioned animals were more likely modulated by the directional heading of the animal. Rotation of the landmark cue showed that place fields from PoS-lesioned animals were not controlled by the cue and shifted unpredictably between sessions. Although fields from ADN-lesioned animals tended to have less landmark control than fields from control animals, this impairment was mild compared with cells recorded from PoS-lesioned animals. Removal of the prominent visual cue also led to instability of place-field representations in PoS-lesioned, but not ADN-lesioned, animals. Together, these findings suggest that an intact HD system is not necessary for the maintenance of place fields, but lesions of brain areas that convey the HD signal can degrade this signal, and lesions of the PoS might lead to perceptual or mnemonic deficits, leading to place-field instability between sessions.

NASA Program Biomedical Research and Countermeasur↗

Selective area doping for Mott neuromorphic electronics

The cointegration of artificial neuronal and synaptic devices with homotypic materials and structures can greatly simplify the fabrication of neuromorphic hardware. We demonstrate experimental realization of vanadium dioxide (VO 2 ) artificial neurons and synapses on the same substrate through selective area carrier doping. By locally configuring pairs of catalytic and inert electrodes that enable nanoscale control over carrier density, volatility or nonvolatility can be appropriately assigned to each two-terminal Mott memory device per lithographic design, and both neuron- and synapse-like devices are successfully integrated on a single chip. Feedforward excitation and inhibition neural motifs are demonstrated at hardware level, followed by simulation of network-level handwritten digit and fashion product recognition tasks with experimental characteristics. Spatially selective electron doping opens up previously unidentified avenues for integration of emerging correlated semiconductors in electronic device technologies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗