SEARCH · Search NASA

Results for “course”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Osmium coated diffraction grating in the Space Shuttle environment - Performance

Samples coated with osmium were flown on the early Shuttle test flights, and on the return of these samples, the osmium coating was found to have disappeared, evidently due to the oxidation of the material in the atomic oxygen atmosphere. An instrument flown on the Spacelab 1 mission comprised an array of five spectrometers covering the extreme ultraviolet (EUV) to near-IR wavelengths. The EUV spectrometer contained an osmium-coated reflective grating located fairly deep within the instruments. Here, results of an assessment of the reflectivity and stability of the osmium surface over the course of the ten-day mission are reported. It is concluded that the osmium reflective coating remained stable relative to the spectrometer coated with MgF2 over the course of the mission. In addition, the ratio of sensitivity of these two spectrometers did not change in any major way from the time of the laboratory calibration until the time of flight two years later. Any changes are within the 50-percent calibration uncertainty.

Torr, M. R.↗

NASA NTRS1986

Aircraft drag prediction and reduction. Addendum 1: Computational drag analyses and minimization; mission impossible?

The Special Course on Aircraft Drag Prediction was sponsored by the AGARD Fluid Dynamics Panel and the von Karman Institute and presented at the von Karman Institute, Rhode-Saint-Genese, Belgium, on 20 to 23 May 1985 and at the NASA Langley Research Center, Hampton, Virginia, USA, 5 to 6 August 1985. The course began with a general review of drag reduction technology. Then the possibility of reduction of skin friction through control of laminar flow and through modification of the structure of the turbulence in the boundary layer were discussed. Methods for predicting and reducing the drag of external stores, of nacelles, of fuselage protuberances, and of fuselage afterbodies were then presented followed by discussion of transonic drag rise. The prediction of viscous and wave drag by a method matching inviscid flow calculations and boundary layer integral calculations, and the reduction of transonic drag through boundary layer control are also discussed. This volume comprises Paper No. 9 Computational Drag Analyses and Minimization: Mission Impossible, which was not included in AGARD Report 723 (main volume).

Slooff, J. W.↗

NASA NTRS1985

Simulation evaluation of display/FLIR concepts for low-altitude, terrain-following helicopter operations

Trials were run on a six degree of freedom combat helicopter simulator to evaluate head-down displays with integrated FLIR imagery for terrain-following, course-steering, and transition to approach and hover helicopter pilot tasks. Three display formats were tested, providing varying levels of symbology for, e.g., the flight path angle, pitch-attitude data, vertical speed, altitude, etc. The pilots were also furnished flight director guidance, i.e., terrain-following, course steering, airspeed hold, and approach to hover. All the displays permitted the pilots to fly satisfactory mission in the CGI scenarios. The results revealed that the pilots preferred a nonconformal FLIR display superposition.

Swenson, H. N.↗

NASA NTRS1984

Meteoroid capture into earth orbit by atmospheric drag

A probabilistic analysis, based on orbital mechanics, is performed to evaluate the chances of meteoroids entering into earth orbit and the potential population of such objects. The problem is addressed in terms of meteoroids on earth collision courses, slowed by atmosphere entry/exit, entering elliptical orbits with apogees above the atmosphere. The overall capture probability is derived by integrating the capture fraction dependence on velocity and size over the probability frequency distribution of the collision courses. Account is taken of eventual orbit decay, lunar infall and ejection after encounters with the moon. The results indicate that the probability that a natural 10-100 m diam object has achieved earth orbit is negligibly small.

Friedlander, A. L.↗

NASA NTRS1987

Introduction to Trans Australia Airlines CRM training

Trans Australia believes that its excellent accident rate record is due to a number of factors. It has a good group of standard operating procedures, and its crews are pretty well self-disciplined and adhere to those procedures. But the other thing that it believes is a factor in its safety record is that perhaps it is also due to its preparedness to be innovative, to keep up with what is going on in the rest of the world and, if it looks to have value, then to be amongst the first to try it out. Trans Australia commenced a program similar to Line Oriented Flight Training (LOFT) fairly early in 1979--that being its first windshear program-- which leads to why they are doing a course of resource management training, which we have chosen to call Aircrew Team Management (ATM). This course is detailed in another presentation.

Davidson, Jim↗

NASA NTRS1987

Apollo Lightcraft project

The detailed design of a beam-powered transatmospheric vehicle, the Apollo Lightcraft, was selected as the project for the design course. The principal goal is to reduce the LEO payload delivery cost by at least three orders of magnitude below the Space Shuttle Orbiter in the post 2020 era. The completely reusable, single-stage-to-orbit shuttlecraft will take off and land vertically, and have a reentry heat shield integrated with its lower surface. At appropriate points along the launch trajectory, the combined cycle propulsion system will transition through three or four airbreathing modes, and finally use a pure rocket mode for orbital insertion. The objective for the Spring semester propulsion source was to design and perform a detailed theoretical analysis on an advanced combined-cycle engine suitable for the Apollo Lightcraft. The preliminary theoretical analysis of this combined-cycle engine is now completed, and the acceleration performance along representative orbital trajectories was simulated. The total round trip cost is $3430 or $686 per person. This represents a payload delivery cost of $3.11/lb, which is a factor of 1000 below the STS. The Apollo Lightcraft concept is now ready for a more detailed investigation during the Fall semester Transatmosphere Vehicle Design course.

Myrabo, Leik N.↗

NASA NTRS1984

A report on the USL NASA/RECON project. Part 2: PC-based R and D in support of IS and R applications

This Working Paper Series entry describes the PC R and D development effort initiated as part of the NASA/RECON Project at the University of Southwestern Louisiana. This effort involves the development of a PC-based environment for the prototyping and evaluation of various tools designed to enhance the interaction between scientists and engineers and remote information systems. The design of PC-based tools for the enhancement of the NASA/RECON university-level courses is described as well as the design of a multi-functional PC-based workstation to support access to and processing of information from local, distributed, and remote sources. Course preparation activities are described in a companion report entitled A Report on the USL NASA/RECON Project: Part 1, the Development of a Transportable, University-Level, IS and R Educational Program, by Suzy Gallagher and Martin Granier, USL/DBMS NASA/RECON Working Paper Series report number DBMS.NASA/RECON-7.

Dominick, Wayne D.↗

NASA NTRS1990

Tensile and shear strength of adhesives

This experiment is conducted in a freshman-level course: Introduction to Engineering Materials. There are no prerequisites for the course although students should have some knowledge of basic algebra. The objectives are to tension and shear test adhesives and to determine the tensile and shear properties of adhesives. Details of equipment of procedure are given.

Stibolt, Kenneth A.↗

NASA NTRS1990

Preparing technicians for engineering materials technology

A long held principle is that for every engineer and scientist there is a need for ten technicians to maximize the efficiency of the technology team for meeting needs of industry and government. Developing an adequate supply of technicians to meet the requirements of the materials related industry will be a challenge and difficult to accomplish. A variety of agencies feel the need and wish to support development of engineering materials technology programs. In a joint effort among Battelle Laboratories, the Department of Energy (DOE) and Northwest College and University Association for Science (NORCUS), the development of an engineering materials technology program for vocational programs and community colleges for the Pacific Northwest Region was recently completed. This effort has implications for a national model. The model Associate of Applied Science degree in Engineering Materials Technology shown provides a general structure. It purposely has course titles which need delimiting while also including a core of courses necessary to develop cognitive, affective and psychomotor skills with the underlining principles of math, science and technology so students have job entry skills, and so that students can learn about and adapt to evolving technology.

Jacobs, James A.↗

NASA NTRS1989

A systematic approach to training: A training needs assessment

In an effort to determine the gap between the actual performance and the necessary performance of employees for the effective and efficient accomplishment of an organization's mission and goals, an organization-wide Training Needs Assessment must be conducted. The purpose of this work was to conduct a training needs analysis and prepare a NASA Langley Catalog of On-Site Training programs. The work included developing a Training Needs Assessment Survey, implementing the survey, analyzing and researching the training needs, identifying the courses to meet the needs, and preparing and designing an On-Site Training Catalog. This needs analysis attempted to identify performance weaknesses and deficits; seek out and provide opportunities for improved performance; anticipate and avoid future problems; enhance and create new strengths. The end product is a user-friendly catalog of on-site training available. The results include: top-down approach to needs assessment; improved communication with training coordinators; 98 percent return rate of the Training Needs Assessment survey; complete, newly designed, user-friendly catalog; 167 catalog descriptions advertised; 82 new courses advertised; training logo; and request for the training application form.

Manning, Margaret H.↗

NASA NTRS1990

Drag-n-fly: a Proposal in Response to a Low Reynolds Number Station Keeping Mission

The Drag-n-Fly is a remotely piloted, low Reynolds number vehicle. It was designed to maintain level controlled flight and fly a closed course at flight speeds corresponding to Reynolds numbers of less than 2 x 10(exp 5) and as close to 1 x 10(exp 5) as possible. The success of the mission will be associated with achieving the lowest mean chord Reynolds number possible and maximizing loiter time on the course. The flight plan for the Drag-n-Fly calls for the vehicle to ascent to a cruise altitude of 25 ft. The airfoil selected for the Drag-n-Fly is a Spica chosen for its high lift coefficient at low Reynolds number. The propulsion system for the Drag-n-Fly consists of a 10 inch diameter propeller mounted on the front of the vehicle. Structural support for the Drag-n-Fly comes from four box beams running the length of the fuselage. The tail and horizontal stabilizers are located far aft of the lifting surface in order to assure proper static stability. The present design for the Drag-n-Fly will meet the criteria for the present mission.

Foohey, Mark↗

NASA NTRS1989

Apparent limitations of head-up-displays and thermal imaging systems

A simulated helicopter flight through a slalom course was presented on a Silicon Graphics IRIS 3130. The display represented the major visual characteristics of thermal images. Subjects were asked to maintain a designated altitude, while flying a slalom course between regularly spaced pylons. The presence of some of the high frequency details in the image improved subjects' ability to reach and maintain the correct altitude. A head-up-display helped in maintaining altitude, but impaired maneuvering around the poles. The results are interpreted in terms of the competition for visual resources between the HUD and the world view.

Brickner, Michael S.↗

NASA NTRS1990

Ca(+) emission in the sunlit ionosphere

In the course of a program of twilight airglow observations, the resonance fluorescence emissions from calcium ions were measured. In particular, twilight sequences were obtained during the period of December 19-22, 1987, which coincided with the Ursids meteorite shower. During this meteorite event the intensities of the Ca(+) emission lines at 3934A increased to the point that the surface brightness profiles could be inverted to volume emission rate profiles. These profiles show evidence for strong spatial redistribution of the Ca(+) over the course of three days. Observations of these emissions during meteor shower periods could provide a valuable tracer for the processes responsible for the transport of ions in the D, E, and F region, allowing the full altitude and latitude extent of the distribution to be determined.

Torr, Marsha R.↗

NASA NTRS1990

Implementation of sensor and control designs for bioregenerative systems

The EGM 4000/4001 Engineering Design class is an interdisciplinary design course that allows students to experience the design process. The projects involved the design of sensors and subsystems of a closed-loop life support system (CLLSS) with special emphasis on the Controlled Ecological Life Support System (CELSS) currently being developed at Kennedy Space Center (KSC) by NASA. To understand the work performed by the students, one must understand the purpose and concept of a CLLSS system. In the years to come, NASA will be constructing Moon bases and sending astronauts to other worlds on extended space missions. In order to support the crews, unreasonably large quantities of supplies would have to be sent from Earth. These supplies would be difficult to transport and require large holds. To remedy this problem, NASA plans to incorporate crops into the spacecraft. These crops would supply food for the crews, as well as provide beneficial psychological side effects. In addition, the plants would recycle the air and human waste and provide oxygen and water for the humans. The students in the design class were to work on supporting this project. In order to do this successfully, the course was separated into two phases. The first semester involved studying the various aspects of a CLLSS to determine sensing needs and develop ideas. The second semester involved first determining which of the ideas were most promising. Specific sensors were then designed and tested under laboratory conditions with promising results. Finally, recommendations for further development were proposed. Atmosphere and temperature control, nutrient delivery, plant health and propagation, and resource recycling are discussed.

Source record↗

NASA NTRS1990

A manned maneuvering unit proximity operations planning and flight guidance display and control system

This task concerns the design, development, testing, and evaluation of a new proximity operations planning and flight guidance display and control system for manned space operations. A forecast, derivative manned maneuvering unit (MMU) was identified as a candidate for the application of a color, highway-in-the-sky display format for the presentation of flight guidance information. A silicon graphics 4D/20-based simulation is being developed to design and test display formats and operations concepts. The simulation includes the following: (1) real-time color graphics generation to provide realistic, dynamic flight guidance displays and control characteristics; (2) real-time graphics generation of spacecraft trajectories; (3) MMU flight dynamics and control characteristics; (4) control algorithms for rotational and translational hand controllers; (5) orbital mechanics effects for rendezvous and chase spacecraft; (6) inclusion of appropriate navigation aids; and (7) measurement of subject performance. The flight planning system under development provides for: (1) selection of appropriate operational modes, including minimum cost, optimum cost, minimum time, and specified ETA; (2) automatic calculation of rendezvous trajectories, en route times, and fuel requirements; (3) and provisions for manual override. Man/machine function allocations in planning and en route flight segments are being evaluated. Planning and en route data are presented on one screen composed of two windows: (1) a map display presenting a view perpendicular to the orbital plane, depicting flight planning trajectory and time data attitude display presenting attitude and course data for use en route; and (2) an attitude display presenting local vertical-local horizontal attitude data superimposed on a highway-in-the-sky or flight channel representation of the flight planned course. Both display formats are presented while the MMU is en route. In addition to these displays, several original display elements are being developed, including a 3DOF flight detector for attitude commanding, a different flight detector for translation commands, and a pictorial representation of velocity deviations.

Gershzohn, Gary R.↗

NASA NTRS1991

High-pressure promoted combustion chamber

In the preferred embodiment of the promoted combusiton chamber disclosed herein, a thick-walled tubular body that is capable of withstanding extreme pressures is arranged with removable upper and lower end closures to provide access to the chamber for dependently supporting a test sample of a material being evaluated in the chamber. To facilitate the real-time analysis of a test sample, several pressure-tight viewing ports capable of withstanding the simulated environmental conditions are arranged in the walls of the tubular body for observing the test sample during the course of the test. A replaceable heat-resistant tubular member and replaceable flame-resistant internal liners are arranged to be fitted inside of the chamber for protecting the interior wall surfaces of the combustion chamber during the evaluation tests. Inlet and outlet ports are provided for admitting high-pressure gases into the chamber as needed for performing dynamic analyses of the test sample during the course of an evaluation test.

Rucker, Michelle A.↗

NASA NTRS1990

Cryogenic liquid hydrogen reorientation activated by constant reverse gravity acceleration of geyser initiation

A key objective for cryogenic fluid management in a spacecraft propulsion system is development of the technology necessary for acquisition or positioning of liquid outflow or vapor venting. Numerical simulation of positive liquid acquisition is attempted by introducing a reverse gravity acceleration from the propulsive thrust of auxiliary engines which exceeds critical value for the initiation of a geyser. Based on the computer simulation of flow fields during the course of fluid reorientation, six dimensionless parameters resulted. These parameters hold near-constant values through the entire range of liquid filled levels, from 30 to 80 percent, during the course of fluid reorientation.

Hung, R. J.↗

NASA NTRS1990

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 4:] Technical communications in aerospace: An analysis of the practices reported by US and European aerospace engineers and scientists

Results are reported from pilot surveys on the use of scientific and technical information (STI) by U.S. and NATO-nation aerospace scientists and engineers, undertaken as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. The survey procedures and the demographic characteristics of the 67 scientists and engineers who responded to the survey are summarized, and the results are presented in a series of tables and discussed in detail. Findings emphasized include: (1) both U.S. and NATO respondents spend around 60 percent of their work week producing or using STI products; (2) NATO respondents are more likely than their U.S. counterparts to use 'formal' STI products (like technical reports and papers) and the services of librarians and online data bases; (3) most of the respondents use computers and information technology in preparing STI products; and (4) respondents who had taken courses in technical communication agreed on the value and ideal subject matter of such courses.

Pinelli, Thomas E.↗