Search NASA⌕ Search

SEARCH · Search NASA

Results for “data dependencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

On the Origin of the Large Remanent Polarization in La:HfO 2

We report that the outstanding remanent polarization of 40 µC cm –2 reported for a 10 nm thin La:HfO 2 film in 2013 has attracted much attention. However, up to now, no explanation for this large remanent polarization has been presented. Density functional theory and X-ray diffraction are used to shine light onto three major aspects that impact the macroscopically observed remanent polarization: phase fraction, spontaneous polarization, and crystallographic texture. Density functional theory calculations show that the spontaneous polarization (P s ) of La:HfO 2 is indeed a bit larger than for other HfO 2 -or ZrO 2 -based compounds; however, the P s is not large enough to explain the observed differences in remanent polarization. While neither phase fractions nor spontaneous polarization nor strain are significantly different from those in other HfO 2 films, a prominent 020/002 texture distinguishes La doped from other HfO 2 -based ferroelectric films. Angular-dependent diffraction data provide a pathway to calculate the theoretically expected remanent polarization, which is in agreement with the experimental observations. Finally, an interplay of the in-plane strain and texture is proposed to impact the formation of the ferroelectric phase during annealing. Lastly, further aspects of the special role of La as a dopant are collected and discussed to motivate future research.

36 MATERIALS SCIENCE↗

Observation of Thermally Induced Piezomagnetic Switching in Cu 2 OSeO 3 Polymorph Synthesized under High-Pressure

A polymorph of Cu 2 OSeO 3 with the distorted kagome lattice is successfully obtained using the high-pressure synthesis technique (Cu 2 OSeO 3 -HP). The structural analysis using X-ray and neutron powder diffraction suggests that the tetrahedral Cu 2+ clusters [similar to those in Cu 2 OSeO 3 ambient-pressure phase (Cu 2 OSeO 3 -AP)] exist in Cu 2 OSeO 3 -HP but with three symmetry inequivalent sites. No structural change is observed between 1.5 K and the room temperature. The complex magnetic H-T phase diagram is established based on the temperature- and field-dependent magnetization data, indicating two distinct antiferromagnetic phases at low and intermediate temperatures, in addition to the higher-temperature spin-glass-like phase. The low temperature phase is identified by neutron powder diffraction refinements as a canted noncollinear antiferromagnetic order with a weak ferromagnetic component along the b-axis. Size of the refined ordered moment is ≈1.00(4) µ B in Cu 2 OSeO 3 -HP, indicating a large enhancement compared to that of Cu 2 OSeO 3 -AP (≈0.61 µ B ). By applying a uniaxial stress, finite enhancement of weak ferromagnetic component in the noncollinear antiferromagnetic phase in Cu 2 OSeO 3 -HP is observed, which is the clear evidence of the piezomagnetic effect. Interestingly, the sign of the induced magnetization changes on heating from the low-temperature to the intermediate-temperature phases, indicating a novel piezomagnetic switching effect in this compound.

36 MATERIALS SCIENCE↗

Permeation of CO 2 and N 2 through glassy poly(dimethyl phenylene) oxide under steady- and presteady-state conditions

Glassy polymers are often used for gas separations because of their high selectivity. Although the dual-mode permeation model correctly fits their sorption and permeation isotherms, its physical interpretation is disputed, and it does not describe permeation far from steady state, a condition expected when separations involve intermittent renewable energy sources. To develop a more comprehensive permeation model, we combine experiment, molecular dynamics, and multiscale reaction–diffusion modeling to characterize the time-dependent permeation of N 2 and CO 2 through a glassy poly(dimethyl phenylene oxide) membrane, a model system. Simulations of experimental time-dependent permeation data for both gases in the presteady-state and steady-state regimes show that both single- and dual-mode reaction–diffusion models reproduce the experimental observations, and that sorbed gas concentrations lag the external pressure rise. The results point to environment-sensitive diffusion coefficients as a vital characteristic of transport in glassy polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of Numerical Atmospheric Models

In this study, a numerical modeling framework for simulating extreme storm events was established using the Weather Research and Forecasting (WRF) model. Such a framework is necessary for the derivation of engineering parameters such as probable maximum precipitation that are the cornerstone of large water-management infrastructure design. Here, this framework was built based on a heavy storm that occurred in Nashville, Tennessee (U.S.), in 2010, and verified using two other extreme storms. To achieve the optimal setup, several combinations of model resolutions, initial/boundary conditions (IC/BC), cloud microphysics, and cumulus parameterization schemes were evaluated using multiple metrics of precipitation characteristics. The evaluation suggests that WRF is most sensitive to the IC/BC option. Simulation generally benefits from finer resolutions up to 5 km. At the 15 km level, NCEP2 IC/BC produces better results, whereas NAM IC/BC performs best at the 5 km level. The recommended model configuration from this study is: NAM or NCEP2 IC/BC (depending on data availability), 15 km or 15–5 km nested grids, Morrison microphysics, and Kain-Fritsch cumulus schemes. Validation of the optimal framework suggests that these options are good starting choices for modeling extreme events similar to the test cases. This optimal framework is proposed in response to emerging engineering demands of extreme storm event forecasting and analyses for design, operations, and risk assessment of large water infrastructures.

Chen, Xiaodong↗

Using a Genetic Algorithm to Optimize Configurations in a Data-Driven Application

Users of highly-configurable software systems often want to optimize a particular objective such as improving a functional outcome or increasing system performance. One approach is to use an evolutionary algorithm. However, many applications today are data-driven, meaning they depend on inputs or data which can be complex and varied. Hence, a search needs to be run (and re-run) for all inputs, making optimization a heavy-weight and potentially impractical process. In this paper, we explore this issue on a data-driven highly-configurable scientific application. We build an exhaustive database containing 3,000 configurations and 10,000 inputs, leading to almost 100 million records as our oracle, and then run a genetic algorithm individually on each of the 10,000 inputs. We ask if (1) a genetic algorithm can find configurations to improve functional objectives; (2) whether patterns of best configurations over all input data emerge; and (3) if we can we use sampling to approximate the results. We find that the original (default) configuration is best only 34% of the time, while clear patterns emerge of other best configurations. Out of 3,000 possible configurations, only 112 distinct configurations achieve the optimal result at least once across all 10,000 inputs, suggesting the potential for lighter weight optimization approaches. We show that sampling of the input data finds similar patterns at a lower cost.

Sinha, Urjoshi↗

The onset and evolution of fatigue-induced abnormal grain growth in nanocrystalline Ni–Fe

Conventional structural metals suffer from fatigue-crack initiation through dislocation activity which forms persistent slip bands leading to notch-like extrusions and intrusions. Ultrafine-grained and nanocrystalline metals can potentially exhibit superior fatigue-crack initiation resistance by suppressing these cumulative dislocation activities. Prior studies on these metals have confirmed improved high-cycle fatigue performance. In the case of nano-grained metals, analyses of subsurface crack initiation sites have indicated that the crack nucleation is associated with abnormally large grains. But, these post-mortem analyses have led to only speculation about when abnormal grain growth occurs (e.g., during fatigue, after crack initiation, or during crack growth). In this study, a recently developed synchrotron X-ray diffraction technique was used to detect the onset and progression of abnormal grain growth during stress-controlled fatigue loading. Our study provides the first direct evidence that the grain coarsening is cyclically induced and occurs well before final fatigue failure—our results indicate that the first half of the fatigue life was spent prior to the detectable onset of abnormal grain growth, while the second half was spent coarsening the nanocrystalline structure and cyclically deforming the abnormally large grains until crack initiation. Post-mortem fractography, coupled with cycle-dependent diffraction data, provides the first details regarding the kinetics of this abnormal grain growth process during high-cycle fatigue testing. Finally, precession electron diffraction images collected in a transmission electron microscope after the in situ fatigue experiment also confirm the X-ray evidence that the abnormally large grains contain substantial misorientation gradients and sub-grain boundaries.

36 MATERIALS SCIENCE↗

Determination of Strain Rate Sensitivity of Micro-struts Manufactured Using the Selective Laser Melting Method

Micro-lattice structures manufactured using the selective laser melting (SLM) process provides the opportunity to realize optimal cellular materials for impact energy absorption. In this paper, strain rate-dependent material properties are measured for stainless steel 316L SLM micro-lattice struts in the strain rate range of 10{sup −3} to 6000 s{sup −1}. At high strain rates, a novel version of the split Hopkinson Bar has been developed. Strain rate-dependent materials data have been used in Cowper–Symonds material model, and the scope and limit of this model in the context of SLM struts have been discussed. Strain rate material data and the Cowper–Symonds model have been applied to the finite element analysis of a micro-lattice block subjected to drop weight impact loading. The model output has been compared to experimental results, and it has been shown that the increase in crush stress due to impact loading is mainly the result of strain rate material behavior. Hence, a systematic methodology has been developed to investigate the impact energy absorption of a micro-lattice structure manufactured using additive layer manufacture (SLM). This methodology can be extended to other micro-lattice materials and configurations, and to other impact conditions.

36 MATERIALS SCIENCE↗

Model selection and parameter estimation in tumor growth models using approximate Bayesian computation-ABC

Cancer is one of the most fatal diseases in the world. Governments and researchers from various areas have continuously concentrated efforts to better understand the disease and propose diagnostic and treatment techniques. The use of mathematical models of tumor growth is of great importance for the development of such techniques. Due to the variety of models nowadays available in the literature, the problems of model selection and parameter estimation come into picture, aiming at suitably predicting the patient’s status of the disease. As the available data on dependent variables of existing models might not justify the use of common likelihood functions, approximate Bayesian computation (ABC) becomes a very attractive tool for model selection and model calibration (parameter estimation) in tumor growth models. In the present study, a Monte Carlo approximate Bayesian computation (ABC) algorithm is applied to select among competing models of tumor growth, with and without chemotherapy treatment. Simulated measurements are used in this work. The results obtained show that the algorithm correctly selects the model and estimates the parameters used to generate the simulated measurements.

60 APPLIED LIFE SCIENCES↗

Cleavage of peptide bonds bearing ionizable amino acids at P{sub 1} by serine proteases with hydrophobic S{sub 1} pocket

Research highlights: {yields} Large pK shifts in ionizable groups when buried in the protein interior. {yields} Substrate dependent shifts in pH optimum for serine proteases. {yields} Lys side chain is a stronger acid in serine protease S{sub 1} pocket than Asp side chain. -- Abstract: Enzymatic hydrolysis of the synthetic substrate succinyl-Ala-Ala-Pro-Xxx-pNA (where Xxx = Leu, Asp or Lys) catalyzed by bovine chymotrypsin (CHYM) or Streptomyces griseus protease B (SGPB) has been studied at different pH values in the pH range 3-11. The pH optima for substrates having Leu, Asp, and Lys have been found to be 7.5-8.0, 5.5-6.0, and {approx}10, respectively. At the normally reported pH optimum (pH 7-8) of CHYM and SGPB, the substrate with Leu at the reactive site is more than 25,000-fold more reactive than that with Asp. However, when fully protonated, Asp is nearly as good a substrate as Leu. The pK values of the side chains of Asp and Lys in the hydrophobic S{sub 1} pocket of CHYM and SGPB have been calculated from pH-dependent hydrolysis data and have been found to be about 9 for Asp and 7.4 and 9.7 for Lys for CHYM and SGPB, respectively. The results presented in this communication suggest a possible application of CHYM like enzymes in cleaving peptide bonds contributed by acidic amino acids between pH 5 and 6.

60 APPLIED LIFE SCIENCES↗

Environmental indicators for sustainable production of algal biofuels

For analyzing sustainability of algal biofuels, we identify 16 environmental indicators that fall into six categories: soil quality, water quality and quantity, air quality, greenhouse gas emissions, biodiversity, and productivity. Indicators are selected to be practical, widely applicable, predictable in response, anticipatory of future changes, independent of scale, and responsive to management. Major differences between algae and terrestrial plant feedstocks, as well as their supply chains for biofuel, are highlighted, for they influence the choice of appropriate sustainability indicators. Algae strain selection characteristics do not generally affect which indicators are selected. The use of water instead of soil as the growth medium for algae determines the higher priority of water- over soil-related indicators. The proposed set of environmental indicators provides an initial checklist for measures of biofuel sustainability but may need to be modified for particular contexts depending on data availability, goals of the stakeholders, and financial constraints. Ultimately, use of these indicators entails defining sustainability goals and targets in relation to stakeholder values in a particular context and can lead to improved management practices.

09 BIOMASS FUELS↗

An efficient correlation for heat and mass transfer effectiveness in tumble-type clothes dryer drums

A heat and mass transfer effectiveness definition relevant to clothes dryers is developed in this work. A correlation is presented for determining the effectiveness of heat and mass transfer in a horizontal-axis, tumble-type clothes dryer drum with axial airflow. The correlation is a function of four measurable quantities: air mass flow rate, cloth mass, air mass in the drum, and the fall time experienced by a cloth falling the full height (i.e. diameter) of the drum. The Buckingham Pi Theorem is applied to the problem in order to derive dimensionless terms upon which the effectiveness depends. Empirical data from several dryers are used to derive an empirical correlation as a function of the dimensionless variables. Three cloth types were investigated, and a separate empirical correlation is proposed for each. Accordingly, the drum effectiveness concept and the correlation presented provide a new, more accurate, computationally efficient, and readily implemented framework for modeling and simulating clothes dryers. It is relevant to conventional gas and electric clothes drying appliances, vapor compression heat pump dryers, and thermoelectric heat pump clothes dryers. Along with appropriate empirical inputs, the framework is extensible to any thermal-evaporative cloth drying systems, including radial-flow horizontal axis tumble drying drums.

42 ENGINEERING↗

Learning interpretable surface elasticity properties from bulk properties via neural network equation learners

Surface elasticity is central to understanding the mechanics and stability of surfaces and interfaces. It is characterized by quantities such as surface tension, residual surface stress, and surface stiffness. However their analytical expressions are typically difficult to derive from atomistic data, and depend strongly on modeling choices. This work presents a neural network-based equation learner which combines customized activation functions and connection-based pruning to discover parsimonious, closed-form equations for surface elasticity from atomistic simulations. Applying the method to seven face-centered cubic (FCC) metals, our equation learner uncovers interpretable equations that describe both low-Miller index and high-Miller index surface properties, capturing long-tail property distributions accurately. The discovered expressions are decoupled into two components: a universal, geometry-driven orientation function, and material-specific baseline coefficients. We find that lower-order properties such as surface tension are fundamentally geometry dependent, while higher-order properties such as surface stress and elasticity show more complex geometry and material dependence. We also relate material dependent coefficients to bulk properties, forming a clear map from bulk material properties to surface elasticity. Overall, this approach demonstrates that interpretable neurosymbolic machine learning can bridge the gap between atomistic simulations and physical laws, enabling the discovery of generalizable structure–property relationships for materials science phenomena such as surface elasticity.

Equation learning↗

Anisotropic magnetocaloric response in AlFe 2 B 2

Experimental investigations of the magnetocaloric response of the intermetallic layered AlFe 2 B 2 compound along the principle axes of the orthorhombic cell were carried out using aligned plate-like crystallites with an anisotropic [101] growth habit. Results were confirmed to be consistent with density functional theory calculations. Field-dependent magnetization data confirm that the a-axis is the easy direction of magnetization within the (ac) plane. The magnetocrystalline anisotropy energy required to rotate the spin quantization vector from the c-to the a-axis direction is determined as K~0.9 MJ/m 3 at 50 K. Magnetic entropy change curves measured near the Curie transition temperature of 285 K reveal a large rotating magnetic entropy change of 1.3 J kg -1 K -1 at μ 0 H app = 2 T, consistent with large differences in magnetic entropy change ΔS mag measured along the a- and c-axes. Overall, this study provides insight of both fundamental and applied relevance concerning pathways for maximizing the magnetocaloric potential of AlFe 2 B 2 for thermal management applications.

36 MATERIALS SCIENCE↗

From a conventional ferromagnetism to a frustrated magnetism: An unexpected role of Fe in Nd(Al 1-x Fe x ) 2 (x ≤ 0.2)

The structure and magnetic properties of Nd(Al 1-x Fe x ) 2 alloys with x = 0, 0.05, 0.1 and 0.2, which adopt cubic MgCu 2 -type structure with space group Fd3¯m, are studied using x-ray powder diffraction, static and dynamic magnetization, and calorimetric measurements. The lattice constant decreases linearly with increasing Fe content from 8.0106(4) Å to 7.9044(4) Å. Large thermal irreversibilities between zero-field-cooled and field-cooled conditions are observed for all substituted samples. Here, the magnetic transition temperatures exhibit a minimum for x = 0.1, and coercive fields at 2 K increase from 70 Oe for x = 0 to 6.3 kOe for x = 0.2. The absence of λ-type peak in the heat capacity data, frequency dependence of ac magnetic susceptibility, and memory effects indicate formation of a cluster-glass magnetic state when x ≥ 0.1.

36 MATERIALS SCIENCE↗

Effect of Gd substitution on the structure and magnetic properties of YFeO{sub 3} ceramics

High quality Gd-doped YFeO{sub 3} polycrystalline samples were synthesized by solid-state reaction method. The crystal structure of the samples can be described by the space group of Pbnm (No. 62). {sup 57}Fe Moessbauer spectra show that only the high spin Fe{sup 3+} exists and the samples are magnetic ordering at room temperature. The spontaneous magnetization at room temperature was observed and the paramagnetic contribution from Gd{sup 3+} ions was confirmed by the significant enhancement of the magnetization. Temperature-dependent magnetization data correlate with the Gd concentration x and follow the Curie-Weiss law above the ferromagnetic transition temperature. Magnetic measurements suggest that the substitution of Y{sup 3+} ions by Gd{sup 3+} ions effectively enhance the magnetization of YFeO{sub 3}. This is achieved by the additional Gd-Gd interactions, Gd-Fe interactions and the variation of Fe-O-Fe superexchange bond caused by distortion of the crystal structure. - Graphical abstract: The crystallographic structure of YFeO{sub 3} and the magnetic hysteresis loops of Y{sub 1-x}Gd{sub x}FeO{sub 3} (x=0, 0.1, 0.5, and 1) samples at room temperature. Highlights: Black-Right-Pointing-Pointer Y{sub 1-x}Gd{sub x}FeO{sub 3} (0{<=}x{<=}1) ceramics were synthesized by solid state reaction method. Black-Right-Pointing-Pointer Y{sub 1-x}Gd{sub x}FeO{sub 3} (0{<=}x{<=}1) samples are ferromagnetic ordering at room temperature. Black-Right-Pointing-Pointer Results of {sup 57}Fe Moessbauer spectra are typical for Fe{sup 3+} high spin state. Black-Right-Pointing-Pointer Substitution of Y{sup 3+} ions by Gd{sup 3+} ions enhances the magnetization of YFeO{sub 3} obviously.

36 MATERIALS SCIENCE↗

Synthesis, structure and magnetic properties of Sr{sub 2}Fe{sub 1-x}Ga{sub x}MoO{sub 6} (0 {<=} x {<=} 0.6) double perovskites

Polycrystalline Sr{sub 2}Fe{sub 1-x}Ga{sub x}MoO{sub 6} (0 {<=} x {<=} 0.6) materials have been synthesized by solid state reaction method and studied by neutron powder diffraction (NPD) and magnetization measurements. Rietveld analysis of the temperature dependent NPD data shows that the compounds crystallize in the tetragonal symmetry in the space group I4/m. The anti-site (AS) defects concentration increases with Ga doping, giving rise to highly B-site disordered materials. Ga doping at the Fe-site decreases the cell volume. The evolution of bond lengths and the cation oxidation states was determined from the Rietveld refinement data. The saturation magnetization and Curie temperature decreased with the increasing Ga content in the samples. Low temperature neutron diffraction data analysis and magnetization measurements confirm the magnetic interaction as ferrimagnetic in the sample.

36 MATERIALS SCIENCE↗

Exposure to coplanar PCBs induces endothelial cell inflammation through epigenetic regulation of NF-κB subunit p65

Epigenetic modifications of DNA and histones alter cellular phenotypes without changing genetic codes. Alterations of epigenetic marks can be induced by exposure to environmental pollutants and may contribute to associated disease risks. Here we test the hypothesis that endothelial cell dysfunction induced by exposure to polychlorinated biphenyls (PCBs) is mediated in part though histone modifications. In this study, human vascular endothelial cells were exposed to physiologically relevant concentrations of several PCBs congeners (e.g., PCBs 77, 118, 126 and 153) followed by quantification of inflammatory gene expression and changes of histone methylation. Only exposure to coplanar PCBs 77 and 126 induced the expression of histone H3K9 trimethyl demethylase jumonji domain-containing protein 2B (JMJD2B) and nuclear factor-kappa B (NF-κB) subunit p65, activated NF-κB signaling as evidenced by nuclear translocation of p65, and up-regulated p65 target inflammatory genes, such as interleukin (IL)-6, C-reactive protein (CRP), intercellular adhesion molecule-1 (ICAM-1), vascular cell adhesion molecule-1 (VCAM-1), and IL-1α/β. The increased accumulation of JMJD2B in the p65 promoter led to a depletion of H3K9me3 repression mark, which accounts for the observed up-regulation of p65 and associated inflammatory genes. JMJD2B gene knockdown confirmed a critical role for this histone demethylase in mediating PCB-induced inflammation of the vascular endothelium. Finally, it was determined, via chemical inhibition, that PCB-induced up-regulation of JMJD2B was estrogen receptor-alpha (ER-α) dependent. These data suggest that coplanar PCBs may exert endothelial cell toxicity through changes in histone modifications. - Highlights: • Coplanar PCBs significantly induced histone demethylase JMJD2B expression. • Coplanar PCBs activated NF-κB through p65 up-regulation and nuclear translocation. • Histone H3K4 and K9 modifications were mediated by ER-α/JMJD2B/MLL2 complex. • ER-α may be involved in the regulation of PCB-induced JMJD2B expression.

60 APPLIED LIFE SCIENCES↗

Suppression of type I interferon production by porcine epidemic diarrhea virus and degradation of CREB-binding protein by nsp1

Type I interferons (IFN-α/β) are the major components of the innate immune response of hosts, and in turn many viruses have evolved to modulate the host response during infection. We found that the IFN-β production was significantly suppressed during PEDV infection in cells. To identify viral IFN antagonists and to study their suppressive function, viral coding sequences for the entire structural and nonstructural proteins were cloned and expressed. Of 16 PEDV nonstructural proteins (nsps), nsp1, nsp3, nsp7, nsp14, nsp15 and nsp16 were found to inhibit the IFN-β and IRF3 promoter activities. The sole accessory protein ORF3, structure protein envelope (E), membrane (M), and nucleocapsid (N) protein were also shown to inhibit such activities. PEDV nsp1 did not interfere the IRF3 phosphorylation and nuclear translocation but interrupted the enhanceosome assembly of IRF3 and CREB-binding protein (CBP) by degrading CBP. A further study showed that the CBP degradation by nsp1 was proteasome-dependent. Our data demonstrate that PEDV modulates the host innate immune responses by degrading CBP and suppressing ISGs expression. - Highlights: • PEDV modulates the host innate immune system by suppressing the type I interferon production and ISGs expression. • Ten viral proteins were identified as IFN antagonists, and nsp1 was the most potent viral IFN antagonist. • PEDV nsp1 did not interfere the IRF3 phosphorylation and nuclear translocation but interrupted the enhanceosome assembly of IRF3 and CREB-binding protein (CBP). • PEDV nsp1 caused the CBP degradation in the nucleus, which may be the key mechanism for PEDV-mediated IFN downregulation.

60 APPLIED LIFE SCIENCES↗