Search NASA⌕ Search

SEARCH · Search NASA

Results for “data usage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Analysis of Limit Cycle Oscillation Data from the Aeroelastic Test of the SUGAR Truss-Braced Wing Model

Research focus in recent years has been given to the design of aircraft that provide significant reductions in emissions, noise and fuel usage. Increases in fuel efficiency have also generally been attended by overall increased wing flexibility. The truss-braced wing (TBW) configuration has been forwarded as one that increases fuel efficiency. The Boeing company recently tested the Subsonic Ultra Green Aircraft Research (SUGAR) Truss-Braced Wing (TBW) wind-tunnel model in the NASA Langley Research Center Transonic Dynamics Tunnel (TDT). This test resulted in a wealth of accelerometer data. Other publications have presented details of the construction of that model, the test itself, and a few of the results of the test. This paper aims to provide a much more detailed look at what the accelerometer data says about the onset of aeroelastic instability, usually known as flutter onset. Every flight vehicle has a location in the flight envelope of flutter onset, and the TBW vehicle is not different. For the TBW model test, the flutter onset generally occurred at the conditions that the Boeing company analysis said it should. What was not known until the test is that, over a large area of the Mach number dynamic pressure map, the model displayed wing/engine nacelle aeroelastic limit cycle oscillation (LCO). This paper dissects that LCO data in order to provide additional insights into the aeroelastic behavior of the model.

Bartels, Robert E.↗
DOE OSTI2026

Ensemble Kalman filter for data assimilation coupled with low-resolution computations techniques applied in fluid dynamics

This paper presents an innovative Reduced-order model (ROM) for merging experimental and simulation data using data assimilation (DA) to estimate the "True" state of a fluid dynamics system, leading to more accurate predictions. Our methodology introduces a novel approach by implementing the ensemble Kalman filter (EnKF) within a reduced-dimensional framework, grounded in a robust theoretical foundation and applied to fluid dynamics. To address the substantial computational demands of DA, the proposed ROM employs low-resolution (LR) techniques to drastically reduce computational costs. This innovative approach involves downsampling datasets for DA computations, followed by an advanced reconstruction technique based on low-cost singular value decomposition (lcSVD). The lcSVD method, a key innovation in this paper, has never been applied to DA before and offers a highly efficient way to enhance resolution with minimal computational resources. Our results demonstrate significant reductions in both computation time and RAM usage through these LR techniques without compromising the accuracy of the estimations. For instance, in a turbulent test case, for a data compression rate of 15.9, the LR approach can achieve a speed-up of 13.7 and a RAM compression of 90.9% while maintaining a low relative root mean square error (RRMSE) of 2.6%, compared to 0.8% in the high-resolution (HR) reference. Furthermore, we highlight the effectiveness of the EnKF in estimating and predicting the state of fluid flow systems based on limited observations and given low-fidelity numerical data. This paper highlights the potential of the proposed DA method in fluid dynamics applications, particularly for improving computational efficiency in CFD and related fields. Its ability to balance accuracy with low computational and memory costs makes it especially suitable for large-scale and real-time applications, such as environmental monitoring or engineering design. This method will be incorporated into ModelFLOWs-app.

Data Assimilation↗
NASA NTRSDate not supplied

Notes on Digital-Data Analysis

The presentation is an overview and discussion of concepts normally encountered during digital-signal processing of sampled time histories. It is not a comprehensive literature survey, but simply a practical guide for best usage. Sections of the talk cover: digital sampling and representation, the Nyquist-Shannon sampling theorem, aliasing or frequency folding, the power spectrum, windowing and spectral spreading, scalloping, and best practices. The Advanced Air Transport Technology Project supports this effort.

Aeroacoustics↗
NASA NTRS2006

Integrated Modeling and Simulation Verification, Validation, and Accreditation Strategy for Exploration Systems Mission Directorate

Models and simulations (M&S) are critical resources in the exploration of space. They support program management, systems engineering, integration, analysis, test, and operations and provide critical information and data supporting key analyses and decisions (technical, cost and schedule). Consequently, there is a clear need to establish a solid understanding of M&S strengths and weaknesses, and the bounds within which they can credibly support decision-making. Their usage requires the implementation of a rigorous approach to verification, validation and accreditation (W&A) and establishment of formal process and practices associated with their application. To ensure decision-making is suitably supported by information (data, models, test beds) from activities (studies, exercises) from M&S applications that are understood and characterized, ESMD is establishing formal, tailored W&A processes and practices. In addition, to ensure the successful application of M&S within ESMD, a formal process for the certification of analysts that use M&S is being implemented. This presentation will highlight NASA's Exploration Systems Mission Directorate (ESMD) management approach for M&S W&A to ensure decision-makers receive timely information on the model's fidelity, credibility, and quality.

Hale, Joseph P.↗
NASA NTRS1975

Insulated electrocardiographic electrodes

An integrated system is disclosed including an insulated electrode and an impedance transformer which can be assembled in a small plastic housing and used for the acquisition of electrocardiographic data. The electrode may be employed without a paste electrolyte and may be attached to the body for extended usage without producing skin reaction. The electrode comprises a thin layer of suitable nontoxic dielectric material preferably deposited by radio frequency sputtering onto a conductive substrate. The impedance transformer preferably comprises an operational amplifier having an FET input stage connected in the unity gain configuration which provides a very low lower cut-off frequency, a high input impedance with a very small input bias current, a low output impedance, and a high signal-to-noise ratio.

David, R. M.↗
NASA NTRS1979

ATLAS, an integrated structural analysis and design system. Volume 2: System design document

ATLAS is a structural analysis and design system, operational on the Control Data Corporation 6600/CYBER computers. The overall system design, the design of the individual program modules, and the routines in the ATLAS system library are described. The overall design is discussed in terms of system architecture, executive function, data base structure, user program interfaces and operational procedures. The program module sections include detailed code description, common block usage and random access file usage. The description of the ATLAS program library includes all information needed to use these general purpose routines.

Erickson, W. J.↗
NASA NTRS1985

Power requirements for commercial communications spacecraft

Historical data on commercial spacecraft power systems are presented and their power requirements to the growth of satellite communications channel usage are related. Some approaches for estimating future power requirements of this class of spacecraft through the year 2000 are proposed. The key technology drivers in satellite power systems are addressed. Several technological trends in such systems are described, focusing on the most useful areas for research and development of major subsystems, including solar arrays, energy storage, and power electronics equipment.

Billerbeck, W. J.↗
NASA NTRS1990

Development and applications of nondestructive evaluation at Marshall Space Flight Center

A brief description of facility design and equipment, facility usage, and typical investigations are presented for the following: Surface Inspection Facility; Advanced Computer Tomography Inspection Station (ACTIS); NDE Data Evaluation Facility; Thermographic Test Development Facility; Radiographic Test Facility; Realtime Radiographic Test Facility; Eddy Current Research Facility; Acoustic Emission Monitoring System; Advanced Ultrasonic Test Station (AUTS); Ultrasonic Test Facility; and Computer Controlled Scanning (CONSCAN) System.

Whitaker, Ann F.↗
NASA NTRS2010

Telescience Support Center Data System Software

The Telescience Support Center (TSC) team has developed a databasedriven, increment-specific Data Require - ment Document (DRD) generation tool that automates much of the work required for generating and formatting the DRD. It creates a database to load the required changes to configure the TSC data system, thus eliminating a substantial amount of labor in database entry and formatting. The TSC database contains the TSC systems configuration, along with the experimental data, in which human physiological data must be de-commutated in real time. The data for each experiment also must be cataloged and archived for future retrieval. TSC software provides tools and resources for ground operation and data distribution to remote users consisting of PIs (principal investigators), bio-medical engineers, scientists, engineers, payload specialists, and computer scientists. Operations support is provided for computer systems access, detailed networking, and mathematical and computational problems of the International Space Station telemetry data. User training is provided for on-site staff and biomedical researchers and other remote personnel in the usage of the space-bound services via the Internet, which enables significant resource savings for the physical facility along with the time savings versus traveling to NASA sites. The software used in support of the TSC could easily be adapted to other Control Center applications. This would include not only other NASA payload monitoring facilities, but also other types of control activities, such as monitoring and control of the electric grid, chemical, or nuclear plant processes, air traffic control, and the like.

Rahman, Hasan↗
NASA NTRS2012

Towards A Model-Based Prognostics Methodology for Electrolytic Capacitors: A Case Study Based on Electrical Overstress Accelerated Aging

A remaining useful life prediction methodology for electrolytic capacitors is presented. This methodology is based on the Kalman filter framework and an empirical degradation model. Electrolytic capacitors are used in several applications ranging from power supplies on critical avionics equipment to power drivers for electro-mechanical actuators. These devices are known for their comparatively low reliability and given their criticality in electronics subsystems they are a good candidate for component level prognostics and health management. Prognostics provides a way to assess remaining useful life of a capacitor based on its current state of health and its anticipated future usage and operational conditions. We present here also, experimental results of an accelerated aging test under electrical stresses. The data obtained in this test form the basis for a remaining life prediction algorithm where a model of the degradation process is suggested. This preliminary remaining life prediction algorithm serves as a demonstration of how prognostics methodologies could be used for electrolytic capacitors. In addition, the use degradation progression data from accelerated aging, provides an avenue for validation of applications of the Kalman filter based prognostics methods typically used for remaining useful life predictions in other applications.

Celaya, Jose R.↗
NASA NTRS2011

A Model-based Prognostics Methodology for Electrolytic Capacitors Based on Electrical Overstress Accelerated Aging

A remaining useful life prediction methodology for electrolytic capacitors is presented. This methodology is based on the Kalman filter framework and an empirical degradation model. Electrolytic capacitors are used in several applications ranging from power supplies on critical avionics equipment to power drivers for electro-mechanical actuators. These devices are known for their comparatively low reliability and given their criticality in electronics subsystems they are a good candidate for component level prognostics and health management. Prognostics provides a way to assess remaining useful life of a capacitor based on its current state of health and its anticipated future usage and operational conditions. We present here also, experimental results of an accelerated aging test under electrical stresses. The data obtained in this test form the basis for a remaining life prediction algorithm where a model of the degradation process is suggested. This preliminary remaining life prediction algorithm serves as a demonstration of how prognostics methodologies could be used for electrolytic capacitors. In addition, the use degradation progression data from accelerated aging, provides an avenue for validation of applications of the Kalman filter based prognostics methods typically used for remaining useful life predictions in other applications.

Electrolytic capacitors↗
NASA NTRSDate not supplied

Using Machine Learning to Classify Earth Science Articles

Developing a machine learning pipeline to automatic the classification of research article topics, where topics are geophysical descriptors. The resulting classified documents will be added to the Usage-Based Discovery graph database, along with corresponding NASA Earth Science datasets, with the intent of linking the NASA data product with uses of it that can be searched by topic. The project will aid in the following goals (1) creating a wider representation of how and how much NASA Earth Science data products are used, (2) identifying when NASA data products have been used even when they are not clearly cited, and (3) providing the UBD search tool end-user with set of recommended datasets based on a given topic query.

Machine Learning↗
NASA NTRS2009

Geosynchronous Environment for ORDEM2008

The new version of the NASA Orbital Debris Engineering Model (ORDEM2008) requires accurate populations as input template files to be used in the calculation of orbital debris fluxes on chosen spacecraft or within telescope/radar fields-of-view. Populations in ORDEM2008 are derived from a consortium of data and modeling. Geosynchronous (GEO) satellites and debris form a distinct ORDEM2008 population that is applied to the distinct analysis of GEO fluxes. Low Earth orbit (LEO) populations are derived by combining modeling results with ground-based data, primarily from radar systems and in-situ data. In contrast, the GEO region has not been as well observed. The distance between orbiting objects and ground-based instruments precludes the wide usage of radar as a means of observation. Instead, optical instruments dominate in the study of GEO. Of these, the NASA sponsored Michigan Orbital Debris Survey Telescope (MODEST) has provided 4 years of surveys of the region detecting cataloged objects (correlated targets) and non-cataloged objects (uncorrelated targets) to an estimated minimum size of 30 cm. This paper describes the methods of combining NASA launch database and satellite breakup and orbital propagation modeling with MODEST 2004-to-2006 uncorrelated target data to attain a GEO environment to 10 cm. Assuming that MODEST uncorrelated targets are breakup debris allows for the extension of the debris survey data to smaller sizes with the NASA Standard Breakup model. Each orbit within the total resulting GEO population is marked by a random argument of perigee and nearly constant mean motion, eccentricity, inclination, and node over the nearly 3 years of observation. Lack of published references of past breakups in GEO is mitigated by the orbital propagation of MODEST extended data to 1995 (the beginning epoch of ORDEM2008).

Krisko, Paula H.↗
NASA NTRS2009

The Geosynchrous Environment for ORDEM2010

The new version of the NASA Orbital Debris Engineering Model (ORDEM2010) requires accurate populations as input files to be used in the calculation of orbital debris fluxes on chosen spacecraft or within telescope/radar fields-of-view. Populations in ORDEM2010 are derived from an amalgam of data and modeling. Geosynchronous orbit (GEO) satellites and debris form a distinct ORDEM2010 population that is applied to the distinct analysis of GEO fluxes. Low Earth orbit (LEO) populations are derived by combining modeling results with ground-based data, primarily from radar systems, and in-situ data. In contrast, the GEO region has not been as well observed. The distance between orbiting objects and ground-based instruments precludes the wide usage of radar as a means of observation. Instead, optical instruments dominate in the study of GEO. Of these, the NASA sponsored Michigan Orbital Debris Survey Telescope (MODEST) has provided 3 years of surveys of the region detecting cataloged objects (correlated targets) and non-cataloged objects (uncorrelated targets) to an estimated minimum size of 30 cm. This paper describes the methods of combining NASA launch database and satellite breakup and orbital propagation modeling with MODEST 2004-to-2006 uncorrelated target data to attain a GEO environment to 10 cm. Assuming that MODEST uncorrelated targets are breakup debris allows for the extension of the debris survey data to smaller sizes using the NASA Standard Breakup Model. Each orbit within the total resulting GEO population is marked by a random argument of perigee and nearly constant mean motion, eccentricity, inclination, and right ascension of ascending node (RAAN) over the nearly 3 years of observation. Lack of published references of past breakups in GEO is mitigated by the orbital propagation of MODEST extended data to 1995 (the beginning epoch of ORDEM2010).

Krisko, Paula H.↗
NASA NTRS2006

Statistical Evaluation of Utilization of the ISS

PayLoad Utilization Modeler (PLUM) is a statistical-modeling computer program used to evaluate the effectiveness of utilization of the International Space Station (ISS) in terms of the number of research facilities that can be operated within a specified interval of time. PLUM is designed to balance the requirements of research facilities aboard the ISS against the resources available on the ISS. PLUM comprises three parts: an interface for the entry of data on constraints and on required and available resources, a database that stores these data as well as the program output, and a modeler. The modeler comprises two subparts: one that generates tens of thousands of random combinations of research facilities and another that calculates the usage of resources for each of those combinations. The results of these calculations are used to generate graphical and tabular reports to determine which facilities are most likely to be operable on the ISS, to identify which ISS resources are inadequate to satisfy the demands upon them, and to generate other data useful in allocation of and planning of resources.

Andrews, Ross↗
DOE OSTI2025

Direct I/O for RNTuple Columnar Data

RNTuple is the new columnar data format designed as the successor to ROOT’s TTree format. It allows to make use of modern hardware capabilities and is expected to be used in production by the LHC experiments during the HL-LHC. In this paper, we discuss the usage of Direct I/O to fully exploit modern SSDs, especially in the context of the recent addition of parallel RNTuple writing. We describe the alignment requirements imposed by Direct I/O and approaches to meet them for columnar data formats. Finally, we discuss performance results for both writing and reading, in synthetic benchmarks as well as real-world applications.

Hahnfeld, Jonas [CERN; Goethe U., Frankfurt (main)↗
NASA NTRS2005

Materials Control for Aerospace Applications

The distant future of mankind and the ultimate survivability of the human race, as it is known today, will depend on mans' ability to break earthly bonds and establish new territorial positions throughout the universe. Man must therefore be positioned to not only travel to, but also, to readily adapt to numerous and varying environments. For this mass migration across the galaxies nothing is as import to the human race as is NASA's future missions into Low Earth Orbit (LEO), to the moon, and/or Mars. These missions will form the building blocks to eternity for mankind. From these missions, NASA will develop the foundations for these building blocks based on sound engineering and scientific principles, both known and yet to be discovered. The integrity of the program will lead to development, tracking and control of the most basic elements of hardware production: That being development and control of applications of space flight materials. Choosing the right material for design purposes involves many considerations, such as governmental regulations associated with manufacturing operations, both safety of usage and of manufacturing, general material usage requirements, material longevity and performance requirements, material interfacing compatibility and material usage environments. Material performance is subject to environmental considerations in as much as a given material may perform exceptionally well at standard temperatures and pressures while performing poorly under non-standard conditions. These concerns may be found true for materials relative to the extreme temperatures and vacuum gradients of high altitude usage. The only way to assure that flight worthy materials are used in design is through testing. However, as with all testing, it requires both time on schedule and cost to the operation. One alternative to this high cost testing approach is to rely on a materials control system established by NASA. The NASA community relies on the MAPTIS materials control system founded at MSFC and supported by the other NASA Centers. This system is a data bank of all materials used in space flight operations. These materials are rated for several characteristics that are common concerns in high altitude or deep space usage: Odor, off gassing, material fluid compatibility, toxicity, corrosion susceptibility, stress corrosion susceptibility, etc.

Ferguson, Michael↗
DOE OSTI2024

LIB Design Module for Grid Energy System Application

We will employ a machine learning approach with intelligent data mining and database construction to analyze enormous data repositories for identifying and extracting geographic-dependent cell design specifications from publicly accessible grid-scale energy storage usage databases in an automated way at scale.

Liu, Dianying [Pacific Northwest National Laborato↗