Search NASA⌕ Search

SEARCH · Search NASA

Results for “depth profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Making use of x-ray optical effects in photoelectron-, Auger electron-, and x-ray emission spectroscopies: Total reflection, standing-wave excitation, and resonant effects

We present a general theoretical methodology and related open-access computer program for carrying out the calculation of photoelectron, Auger electron, and x-ray emission intensities in the presence of several x-ray optical effects, including total reflection at grazing incidence, excitation with standing-waves produced by reflection from synthetic multilayers and at core-level resonance conditions, and the use of variable polarization to produce magnetic circular dichroism. Calculations illustrating all of these effects are presented, including in some cases comparisons to experimental results. Sample types include both semi-infinite flat surfaces and arbitrary multilayer configurations, with interdiffusion/roughness at their interfaces. These x-ray optical effects can significantly alter observed photoelectron, Auger, and x-ray intensities, and in fact lead to several generally useful techniques for enhancing surface and buried-layer sensitivity, including layer-resolved densities of states and depth profiles of element-specific magnetization. The computer program used in this study should thus be useful for a broad range of studies in which x-ray optical effects are involved or are to be exploited in next-generation surface and interface studies of nanoscale systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lattice and grain-boundary diffusions of boron atoms in BaSi{sub 2} epitaxial films on Si(111)

A 180-nm-thick boron (B) layer was deposited on a 300-nm-thick a-axis-oriented BaSi{sub 2} epitaxial film grown by molecular beam epitaxy on Si(111) and was annealed at different temperatures in ultrahigh vacuum. The depth profiles of B were investigated using secondary ion mass spectrometry (SIMS) with O{sup 2+}, and the diffusion coefficients of B were evaluated. The B profiles were reproduced well by taking both the lattice and the grain boundary (GB) diffusions into consideration. The cross-sectional transmission electron microscopy (TEM) image revealed that the GBs of the BaSi{sub 2} film were very sharp and normal to the sample surface. The plan-view TEM image exhibited that the grain size of the BaSi{sub 2} film was approximately 0.6 {mu}m. The temperature dependence of lattice and GB diffusion coefficients was derived from the SIMS profiles, and their activation energies were found to be 4.6 eV and 4.4 eV, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A novel instrument for quantitative nanoanalytics involving complementary X-ray methodologies

A novel ultra-high vacuum instrument for X-ray reflectometry and spectrometry-related techniques for nanoanalytics by means of synchrotron radiation has been constructed and commissioned. This versatile instrument was developed by the Physikalisch-Technische Bundesanstalt, Germany's national metrology institute, and includes a 9-axis manipulator that allows for an independent alignment of the samples with respect to all degrees of freedom. In addition, a rotational and translational movement of several photodiodes as well as a translational movement of an aperture system in and out of the beam is provided. Thus, the new instrument enables various analytical techniques based on energy dispersive X-ray detectors such as reference-free X-ray fluorescence analysis (XRF), total-reflection XRF, grazing-incidence XRF in addition to optional X-ray reflectometry measurements or polarization-dependent X-ray absorption fine structure analyses. With this instrument samples having a size of up to 100 mm Multiplication-Sign 100 mm can be analyzed with respect to their mass deposition, elemental or spatial composition, or the species in order to probe surface contamination, layer composition and thickness, the depth profile of matrix elements or implants, the species of nanolayers, nanoparticles or buried interfaces as well as the molecular orientation of bonds. Selected applications of this advanced ultra-high vacuum instrument demonstrate both its flexibility and capability.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Kinetics and thermodynamics associated with Bi adsorption transitions at Cu and Ni grain boundaries

The grain boundary diffusivity of Au in Cu and Cu-Bi, and Cu in Ni and Ni-Bi are characterized by secondary ion mass spectroscopy depth profiling. Samples are equilibrated in a Bi containing atmosphere at temperatures above and below the onset of grain boundary adsorption transitions, sometimes called complexion transitions. A simple thermo-kinetic model is used to estimate the relative entropic contributions to the grain boundary energies. The results indicate that the entropy term plays a major role in promoting thermally and chemically induced grain boundary complexion transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct observation of charge transfer region at interfaces in graphene devices

Nanoscale spectromicroscopic characterizing technique is indispensable for realization of future high-speed graphene transistors. Highly spatially resolved soft X-ray photoelectron microscopy measurements have been performed using our '3D nano-ESCA' (three-dimensional nanoscale electron spectroscopy for chemical analysis) equipment in order to investigate the local electronic states at interfaces in a graphene device structure. We have succeeded in detecting a charge transfer region at the graphene/metal-electrode interface, which extends over {approx}500 nm with the energy difference of 60 meV. Moreover, a nondestructive depth profiling reveals the chemical properties of the graphene/SiO{sub 2}-substrate interface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhanced p-type conduction of B-doped nanocrystalline diamond films by high temperature annealing

We report the enhanced p-type conduction with Hall mobility of 53.3 cm{sup 2} V{sup -1} s{sup -1} in B-doped nanocrystalline diamond (NCD) films by 1000 Degree-Sign C annealing. High resolution transmission electronic microscopy, uv, and visible Raman spectroscopy measurements show that a part of amorphous carbon grain boundaries (GBs) transforms to diamond phase, which increases the opportunity of boron atoms located at the GBs to enter into the nano-diamond grains. This phase transition doping is confirmed by the secondary ion mass spectrum depth profile results that the concentration of B atoms in nano-diamond grains increases after 1000 Degree-Sign C annealing. It is also observed that 1000 Degree-Sign C annealing improves the lattice perfection, reduces the internal stress, decreases the amount of trans-polyacetylene, and increases the number or size of aromatic rings in the sp{sup 2}-bonded carbon cluster in B-doped NCD films. These give the contributions to improve the electrical properties of 1000 Degree-Sign C annealed B-doped NCD films.

36 MATERIALS SCIENCE↗

The role of ZrN capping layer deposited on ultra-thin high-k Zr-doped yttrium oxide for metal-gate metal–insulator–semiconductor applications

Metal-gate MIS structures with and without ZrN capping layer on high-k Y{sub 2}O{sub 3}:Zr/Y{sub 2}O{sub 3} stack were fabricated. The binding energies and depth profiles were investigated by x-ray photoelectron spectroscopy (XPS). The x-ray diffraction (XRD) patterns were compared. It is found that Ti out-diffusion into Zr-based high-k dielectric becomes lesser with the insertion of ZrN capping layer. The electrical properties of current-voltage (I-V) and capacitance-voltage (C-V) characteristics were measured in the postannealing temperature range of 550–850 °C. According to the defect reaction model, Zr cation vacancies are associated with the concentration of Ti ion by a transition from +3 to +2 states. The amount of Zr cation vacancies is quantified and equal to a half of Ti substitution amount at Zr site. The reduction in cation vacancies at high temperatures can well explain the decrease in ΔV{sub FB} for samples with ZrN layer. In contrast, an excess of Ti outdiffusion will produce the interstitial defects in high-k films without ZrN capping.

36 MATERIALS SCIENCE↗

Effects of defect clustering on optical properties of GaN by single and molecular ion irradiation

The effects of irradiation by F, P, and PF{sub 4} on optical properties of GaN were studied experimentally and by atomistic simulations. Additionally, the effect of Ag was studied by simulation. The irradiation energy was 0.6 keV/amu for all projectiles. The measured photoluminescence (PL) decay time was found to be decreasing faster when irradiation was done by molecular ion compared to light ion irradiation. The PL decay time change is connected with the types of defect produced by different projectiles. Simulation results show that the light ions mainly produce isolated point defects while molecular and heavy ions produce clusters of point defects. The total amount of defects produced by the PF{sub 4} projectile was found to be very close to the sum of all defects produced in five individual cascades started by one P and four F single ions. This and the similar depth profiles of damage produced by molecular and light ion irradiations suggest that the defect clusters are one of the important reasons for fast PL decay. Moreover, the simulations of irradiation by Ag ions, whose mass is close to the mass of the PF{sub 4} molecule, showed that the produced defects are clustering in even bigger conglomerates compared to PF{sub 4} case. The latter has a tendency to split in the pre-surface region, reducing on average the density of the collision cascade.

36 MATERIALS SCIENCE↗

Enhanced radiation tolerance of non-polar-terminated ZnO

Room-temperature heavy-ion bombardment of polar (0001) ZnO leads to the formation of intermediate peak and step features in damage–depth profiles measured by ion channeling. Here, we show that these anomalous disorder effects are strongly suppressed for crystals with (1120) and (1010) non-polar surface terminations. Possible defect interaction scenarios responsible for the enhanced radiation tolerance of non-polar-terminated ZnO are discussed.

36 MATERIALS SCIENCE↗

Structure and interface chemistry of MoO{sub 3} back contacts in Cu(In,Ga)Se{sub 2} thin film solar cells

Molybdenum oxide (MoO{sub 3}) is considered as a possible primary back contact for Cu(InGa)Se{sub 2} thin film solar cells for its potential as a transparent back contact for superstrate and bifacial devices. MoO{sub 3} films were deposited on Mo or ITO-coated soda lime glass substrates by reactive rf sputtering in an ambient of Ar + O{sub 2} with O{sub 2}/(O{sub 2} + Ar) = 35% on which Cu(In{sub 0.7}Ga{sub 0.3})Se{sub 2} alloy absorber layers were deposited using multi-source elemental evaporation. Scanning Electron Microscopy studies showed uniform coverage of the as-deposited MoO{sub 3} layer and good adhesion was obtained in all cases. X-ray Photoelectron Spectroscopy depth profile analysis showed that MoSe{sub 2} was not formed at the Cu(InGa)Se{sub 2} interface with either the Mo-MoO{sub 3} or ITO-MoO{sub 3} back contacts. Determination of the valence band offsets showed that the MoO{sub 3} layer at the interface changes the energy band alignment with Cu(InGa)Se{sub 2}, producing a primary contact with lower valence band offset than ITO. Cu(In,Ga)Se{sub 2} thin film solar cells prepared using an as-deposited Mo-MoO{sub 3} back contact yielded a best conversion efficiency of 14%, with V{sub OC} = 647 mV, J{sub SC} = 28.4 mA/cm{sup 2}, and FF = 78.1%. Cells with ITO-MoO{sub 3} back contact showed a best efficiency of 12%, with V{sub OC} = 642 mV, J{sub SC} = 26.8 mA/cm{sup 2}, and FF = 69.2%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of surface integrity of grinded gears using Barkhausen noise analysis and x-ray diffraction

The contribution is focused to present results of study grinded gears made of 18CrNiMo7-6 steel used in the wind power plant for support (service) purposes. These gears were case-hardened due to standard hard case and soft core formation. This heat treatment increases wear resistance and fatigue strength of machine parts. During serial production some troubles with surface integrity have occurred. When solving complex problems lots of samples were prepared. For grinding of gears were used different parameters of cutting speed, number of material removal and lots from different subsuppliers. Material characterization was carried out using Barkhausen noise analysis (BNA) device; X-ray diffraction (XRD) measurement of surface residual stresses was done as well. Depth profile of measured characteristics, e.g. magnetoelastic parameter and residual stress was obtained by step by step layers' removing using electrolytic etching. BNA software Viewscan was used to measure magnetizing frequency sweep (MFS) and magnetizing voltage sweep (MVS). Scanning of Magnetoelastic parameter (MP) endwise individual teeth were also carried out with Viewscan. These measurements were done to find problematic surface areas after grinding such as thermal damaged locations. Plots of the hardness and thickness of case-hardened layer on cross sections were measurered as well. Evaluation of structure of subsurface case-hardened layer and core was made on etched metallographic patterns. The aim of performed measurements was to find correlation between conditions of grinding, residual stresses and structural and magnetoelastic parameters. Based on correlation of measured values and technological parameters optimizing the production of gears will be done.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CdCl{sub 2} treatment related diffusion phenomena in Cd{sub 1−x}Zn{sub x}S/CdTe solar cells

Utilisation of wide bandgap Cd{sub 1−x}Zn{sub x}S alloys as an alternative to the CdS window layer is an attractive route to enhance the performance of CdTe thin film solar cells. For successful implementation, however, it is vital to control the composition and properties of Cd{sub 1−x}Zn{sub x}S through device fabrication processes involving the relatively high-temperature CdTe deposition and CdCl{sub 2} activation steps. In this study, cross-sectional scanning transmission electron microscopy and depth profiling methods were employed to investigate chemical and structural changes in CdTe/Cd{sub 1−x}Zn{sub x}S/CdS superstrate device structures deposited on an ITO/boro-aluminosilicate substrate. Comparison of three devices in different states of completion—fully processed (CdCl{sub 2} activated), annealed only (without CdCl{sub 2} activation), and a control (without CdCl{sub 2} activation or anneal)—revealed cation diffusion phenomena within the window layer, their effects closely coupled to the CdCl{sub 2} treatment. As a result, the initial Cd{sub 1−x}Zn{sub x}S/CdS bilayer structure was observed to unify into a single Cd{sub 1−x}Zn{sub x}S layer with an increased Cd/Zn atomic ratio; these changes defining the properties and performance of the Cd{sub 1−x}Zn{sub x}S/CdTe device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced reaction rates in NDP analysis with neutron scattering

Neutron depth profiling (NDP) makes accessible quantitative information on a few isotopic concentration profiles ranging from the surface into the sample a few micrometers. Because the candidate analytes for NDP are few, there is little interference encountered. Furthermore, neutrons have no charge so mixed chemical states in the sample are of no direct concern. There are a few nuclides that exhibit large probabilities for neutron scattering. The effect of neutron scattering on NDP measurements has not previously been evaluated as a basis for either enhancing the reaction rates or as a source of measurement error. Hydrogen is a common element exhibiting large neutron scattering probability found in or around sample volumes being analyzed by NDP. A systematic study was conducted to determine the degree of signal change when neutron scattering occurs during analysis. The relative signal perturbation was evaluated for materials of varied neutron scattering probability, concentration, total mass, and geometry. Signal enhancements up to 50% are observed when the hydrogen density is high and in close proximity to the region of analysis with neutron beams of sub thermal energies. Greater signal enhancements for the same neutron number density are reported for thermal neutron beams. Even adhesive tape used to position the sample produces a measureable signal enhancement. Because of the shallow volume, negligible distortion of the NDP measured profile shape is encountered from neutron scattering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dual anisotropic character in Fe/Pt multilayer grown on (001) MgO substrate

The multilayers of [Fe(5Å)/Pt(25 Å)]{sub ×15} were prepared by dc magnetron sputtering on 50 Å Pt-buffered MgO substrates. The structural characterization of the multilayers was carried out using X-ray diffraction, X-ray reflectivity. The Secondary ion mass spectroscopy measurement reveals the depth profile and compositional modulations of the multilayer films as per our design specifications. Room temperature magnetic measurements were carried out by using SQUID both in-plane and out-of-plane sample geometry. Magnetization measurements show similar M-H loops for both in-plane and out-of-plane directions of external magnetic field with a coercivity of 190 Oe. These measurements indicate that our samples are magnetically soft and have multifunctional character which is important for making magnetic tunnel junctions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polarity dependence of the electrical characteristics of Ag reflectors for high-power GaN-based light emitting diodes

We report on the polarity dependence of the electrical properties of Ag reflectors for high-power GaN-based light-emitting diodes. The (0001) c-plane samples become ohmic after annealing in air. However, the (11–22) semi-polar samples are non-ohmic after annealing, although the 300 °C-annealed sample shows the lowest contact resistivity. The X-ray photoemission spectroscopy (XPS) results show that the Ga 2p core level for the c-plane samples experiences larger shift toward the valence band than that for the semi-polar samples. The XPS depth profile results show that unlike the c-plane samples, the semi-polar samples contain some amounts of oxygen at the Ag/GaN interface regions. The outdiffusion of Ga atoms is far more significant in the c-plane samples than in the semi-polar samples, whereas the outdiffusion of N atoms is relatively less significant in the c-plane samples. On the basis of the electrical and XPS results, the polarity dependence of the electrical properties is described and discussed.

36 MATERIALS SCIENCE↗

Ultraviolet laser patterning of porous silicon

This work reports on the fabrication of 1D fringed patterns on nanostructured porous silicon (nanoPS) layers (563, 372, and 290 nm thick). The patterns are fabricated by phase-mask laser interference using single pulses of an UV excimer laser (193 nm, 20 ns pulse duration). The method is a single-step and flexible approach to produce a large variety of patterns formed by alternate regions of almost untransformed nanoPS and regions where its surface has melted and transformed into Si nanoparticles (NPs). The role of laser fluence (5–80 mJ cm{sup −2}), and pattern period (6.3–16 μm) on pattern features and surface structuring are discussed. The results show that the diameter of Si NPs increases with fluence up to a saturation value of 75 nm for a fluence ≈40 mJ cm{sup −2}. In addition, the percentage of transformed to non-transformed region normalized to the pattern period follows similar fluence dependence regardless the period and thus becomes an excellent control parameter. This dependence is fitted within a thermal model that allows for predicting the in-depth profile of the pattern. The model assumes that transformation occurs whenever the laser-induced temperature increase reaches the melting temperature of nanoPS that has been found to be 0.7 of that of crystalline silicon for a porosity of around 79%. The role of thermal gradients across the pattern is discussed in the light of the experimental results and the calculated temperature profiles, and shows that the contribution of lateral thermal flow to melting is not significant for pattern periods ≥6.3 μm.

36 MATERIALS SCIENCE↗

On the limits of uniaxial magnetic anisotropy tuning by a ripple surface pattern

Ion beam patterning of a nanoscale ripple surface has emerged as a versatile method of imprinting uniaxial magnetic anisotropy (UMA) on a desired in-plane direction in magnetic films. In the case of ripple patterned thick films, dipolar interactions around the top and/or bottom interfaces are generally assumed to drive this effect following Schlömann's calculations for demagnetizing fields of an ideally sinusoidal surface [E. Schlömann, J. Appl. Phys. 41, 1617 (1970)]. We have explored the validity of his predictions and the limits of ion beam sputtering to induce UMA in a ferromagnetic system where other relevant sources of magnetic anisotropy are neglected: ripple films not displaying any evidence of volume uniaxial anisotropy and where magnetocrystalline contributions average out in a fine grain polycrystal structure. To this purpose, the surface of 100 nm cobalt films grown on flat substrates has been irradiated at fixed ion energy, fixed ion fluency but different ion densities to make the ripple pattern at the top surface with wavelength Λ and selected, large amplitudes (ω) up to 20 nm so that stray dipolar fields are enhanced, while the residual film thickness t = 35–50 nm is sufficiently large to preserve the continuous morphology in most cases. The film-substrate interface has been studied with X-ray photoemission spectroscopy depth profiles and is found that there is a graded silicon-rich cobalt silicide, presumably formed during the film growth. This graded interface is of uncertain small thickness but the range of compositions clearly makes it a magnetically dead layer. On the other hand, the ripple surface rules both the magnetic coercivity and the uniaxial anisotropy as these are found to correlate with the pattern dimensions. Remarkably, the saturation fields in the hard axis of uniaxial continuous films are measured up to values as high as 0.80 kG and obey a linear dependence on the parameter ω{sup 2}/Λ/t in quantitative agreement with Schlömann's prediction for a surface anisotropy entirely ruled by dipolar interaction. The limits of UMA tuning by a ripple pattern are discussed in terms of the surface local angle with respect to the mean surface and of the onset of ripple detachment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exotic exchange bias at epitaxial ferroelectric-ferromagnetic interfaces

Multiferroics in spintronics have opened up opportunities for future technological developments, particularly in the field of ferroelectric (FE)-ferromagnetic (FM) oxide interfaces with functionalities. We find strong exchange bias shifts (up to 84 Oe) upon field cooling in metal-oxide (Fe/BaTiO{sub 3}) films combining FM and FE layers. The saturation magnetic moment of the FM layer is also significantly higher than in bulk (3.0 ± 0.2 μ{sub B}/atom) and the reversal mechanism occurs via a domain nucleation process. X-ray absorption spectroscopy at the Fe K-edge and Ba L3-edge indicate presence of few monolayers of antiferromagnetic FeO at the interface without the formation of any BaFeO{sub 3} layer. Polarized neutron reflectometry corroborates with our magnetization data as we perform depth profiling of the magnetic and structural densities in these bilayers. Our first principles density functional calculations support the formation of antiferromagnetic FeO layers at the interface along with an enhancement of Fe magnetic moments in the inner ferromagnetic layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗