Search NASA⌕ Search

SEARCH · Search NASA

Results for “digital data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Radiometry with nighttime DMSP images in digital form

The USAF Defense Meteorological Satellite Program (DMSP) spacecraft sends images to earth in the form of numbers. It has been common practice to erase the only digital records, the magnetic tapes, for reuse, after films (resembling photographs) have been created from the numbers. While the DMSP images have been widely used, their application in research has been hindered by both the lack of digital data and the lack of an authoritative source of related technical information. The character of the digital form is considered. Each image is essentially a three-dimensional list (X,Y,Z) in which X and Y represent the position coordinates of a pixel and Z is its associated radiance. Only the value of Z is given and the X-Y position must be deduced from adjunct information. Each original scan composed of 1464 pixels represents an area on the earth's surface about 3 km wide and 3000 km long. Strengths and weaknesses of the system with respect to research applications are considered, and concepts for the design of a nocturnal imager are discussed.

Croft, T. A.↗

Topoclimatological survey of Switzerland

The application of Heat Capacity Mapping Mission data to subsynoptic climate analysis of Switzerland was examined. The data included the surface temperature distributions of urban heat islands and the Swiss Alps. Analog and digital data evaluation procedures are described as well as the ground truth acquisition and comparison program. The dependence of the temperature distributions on topography and surface coverage types is assessed. The results indicate that air temperature inversion zones are detectable.

Winiger, M.↗

An improvement in land cover classification achieved by merging microwave data with Landsat multispectral scanner data

The improvement in land cover classification achieved by merging microwave data with Landsat MSS data is examined. To produce a merged data set for analysis and comparison, a registration procedure by which a set of Seasat SAR digital data was merged with the MSS data is described. The Landsat MSS data and the merged Landsat/Seasat data sets were processed using conventional multichannel spectral pattern recognition techniques. An analysis of the classified data sets indicates that while Landsat data delineate different forest types (i.e., deciduous/coniferous) and allow some species separation, SAR data provide additional information related to plant canopy configuration and vegetation density as associated with varying water regimes, and therefore allow for further subdivision in the classification of forested wetlands of the coastal region of the southern United States.

Wu, S. T.↗

Development of an air ground data exchange concept: Flight deck perspective

The planned modernization of the U.S. National Airspace System (NAS) includes the development and use of a digital data link as a means to exchange information between aircraft and ground-based facilities. This report presents an operationally-oriented concept on how data link could be used for applications related directly to air traffic control. The specific goal is to establish the role that data link could play in the air-ground communications. Due regard is given to the unique characteristics of data link and voice communications, current principles of air traffic control, operational procedures, human factors/man-machine interfaces, and the integration of data link with other air and ground systems. The resulting concept is illustrated in the form of a paper-and-pencil simulation in which data link and voice communications during the course of a hypothetical flight are described.

Flathers, G. W., II↗

Predicting Gate Conflicts using NASA ATD-2 Fused Data Sources

The modern day National Airspace System (NAS) is powered by System Wide Information Management (SWIM) which is a real-time digital data sharing infrastructure that provides a high fidelity view of the lifecycle of a flight. The newly available data within the SWIM feeds can be leveraged to help drive efficiencies in the NAS. In this talk, we investigate the gate conflict prediction problem as a concrete use case which could help drive efficiencies. We begin with a high level description of NASA's Airspace Technology Demonstration 2 which is built upon the real-time SWIM feeds and produces the data used in our investigation. We model gate conflicts as a regression problem and describe the iterative process of model building, model validation, and evaluation used to assess the efficacy of our approach.

Coupe, William J.↗

Calculation of day and night emittance values

In July 1983, the Thermal Infrared Multispectral Scanner (TIMS) was flown over Death Valley, California on both a midday and predawn flight within a two-day period. The availability of calibrated digital data permitted the calculation of day and night surface temperature and surface spectral emittance. Image processing of the data included panorama correction and calibration to radiance using the on-board black bodies and the measured spectral response of each channel. Scene-dependent isolated-point noise due to bit drops, was located by its relatively discontinuous values and replaced by the average of the surrounding data values. A method was developed in order to separate the spectral and temperature information contained in the TIMS data. Night and day data sets were processed. The TIMS is unique in allowing collection of both spectral emittance and thermal information in digital format with the same airborne scanner. For the first time it was possible to produce day and night emittance images of the same area, coregistered. These data add to an understanding of the physical basis for the discrimination of difference in surface materials afforded by TIMS.

Kahle, Anne B.↗

Urban land use of the Sao Paulo metropolitan area by automatic analysis of LANDSAT data

The separability of urban land use classes in the metropolitan area of Sao Paulo was studied by means of automatic analysis of MSS/LANDSAT digital data. The data were analyzed using the media K and MAXVER classification algorithms. The land use classes obtained were: CBD/vertical growth area, residential area, mixed area, industrial area, embankment area type 1, embankment area type 2, dense vegetation area and sparse vegetation area. The spectral analysis of representative samples of urban land use classes was done using the "Single Cell" analysis option. The classes CBD/vertical growth area, residential area and embankment area type 2 showed better spectral separability when compared to the other classes.

Parada, N. D. J.↗

A simple low-cost array on the lunar near-side for the early lunar expeditions

A concept of a simple, low-cost array on the lunar near-side is discussed. The concept includes 19 stations laid in a T, with three arms each 36 km long, and separated by 6 km. Each station consists of two 10-m-long orthogonal dipoles, each feeding a receiver of a commercial pocket digital shortwave radio type, and a 3-m spring-loaded mast with a small UHF array at the top for receiving the timing signals and tuning commmands and for sending out the digitized data streams. Each station has 0.25 square meters of solar arrays and 20 kg of lithium batteries. At the array center there is either a digital correlator for processing the signals from each antenna pair to compact the data into a 32-kb/sec channel or a 10-cm telescope for sending back raw data to earth.

Kuiper, T. B. H.↗

ATS-6 - Interferometer

The ATS-6 interferometer provides precision, 3-axis attitude sensing capability. It incorporates a C-band receiver which measures the phase difference of continuous ground station signals received at paired antenna elements and converts this phase difference into digital data that is transmitted to the ground, and is also used as direct input to the onboard digital operations controller for conversion to attitude information. It uses 6 onboard horn antennas, placed in the earth viewing module, with three antennas arranged along each of two orthogonal baselines parallel to the satellite pitch and roll axes, one antenna used as a measurement reference on each baseline, and the remaining two horns, placed to provide phase measurements relative to the respective reference antenna.

Isley, W. C.↗

Forest inventory using multistage sampling with probability proportional to size

A multistage sampling technique, with probability proportional to size, for forest volume inventory using remote sensing data is developed and evaluated. The study area is located in the Southeastern Brazil. The LANDSAT 4 digital data of the study area are used in the first stage for automatic classification of reforested areas. Four classes of pine and eucalypt with different tree volumes are classified utilizing a maximum likelihood classification algorithm. Color infrared aerial photographs are utilized in the second stage of sampling. In the third state (ground level) the time volume of each class is determined. The total time volume of each class is expanded through a statistical procedure taking into account all the three stages of sampling. This procedure results in an accurate time volume estimate with a smaller number of aerial photographs and reduced time in field work.

Parada, N. D. J.↗

Spaceborne SAR data for land-cover classification and change detection

Supervised maximum-likelihood classifications of Seasat, SIR-A, and Landsat pixel data demonstrated that SIR-A data provided the most accurate discrimination (72 percent) between five land-cover categories. Spatial averaging of the SAR data improved classification accuracy significantly due to a reduction in both fading and within-field variability. The best multichannel classification accuracy (97.5 percent) was achieved by combining the SIR-A data with two Seasat images (ascending and descending orbits). In addition, semiquantitative analysis of Seasat-A digital data shows that orbital SAR imagery can be successfully used for multitemporal detection of change related to hydrologic and agronomic conditions by using simple machine processing techniques.

Brisco, B.↗

Deriving surface albedo measurements from narrow band satellite data

A target calibration procedure for obtaining surface albedo from satellite data is presented. The methodology addresses two key issues, the calibration of remotely-sensed, discrete wavelength, digital data and the derivation of an albedo measurement (defined over the solar short wave spectrum) from spectrally limited observations. Twenty-seven Landsat observations, calibrated with urban targets (building roof-tops and parking lots), are used to derive spatial and seasonal patterns of surface reflectance and albedo for four land cover types: city, suburb, farm and forest.

Brest, Christopher L.↗

Use of Convex supercomputers for flight simulation at NASA Langley

The use of the Convex Computer Corporation supercomputers for flight simulation is discussed focusing on a real-time input/output system for supporting the flight simulation. The flight simulation computing system is based on two single processor control data corporation CYBER 175 computers, coupled through extended memory. The Advanced Real-Time Simulation System for digital data distribution and signal conversion is a state-of-the-art, high-speed fiber-optic-based, ring network system which is based on the computer automated measurement and control technology.

Cleveland, Jeff I., II↗

Digital camera with apparatus for authentication of images produced from an image file

A digital camera equipped with a processor for authentication of images produced from an image file taken by the digital camera is provided. The digital camera processor has embedded therein a private key unique to it, and the camera housing has a public key that is so uniquely based upon the private key that digital data encrypted with the private key by the processor may be decrypted using the public key. The digital camera processor comprises means for calculating a hash of the image file using a predetermined algorithm, and second means for encrypting the image hash with the private key, thereby producing a digital signature. The image file and the digital signature are stored in suitable recording means so they will be available together. Apparatus for authenticating at any time the image file as being free of any alteration uses the public key for decrypting the digital signature, thereby deriving a secure image hash identical to the image hash produced by the digital camera and used to produce the digital signature. The apparatus calculates from the image file an image hash using the same algorithm as before. By comparing this last image hash with the secure image hash, authenticity of the image file is determined if they match, since even one bit change in the image hash will cause the image hash to be totally different from the secure hash.

Friedman, Gary L.↗

Small satellite space operations

CTA Space Systems has played a premier role in the development of the 'lightsat' programs of the 80's and 90's. The high costs and development times associated with conventional LEO satellite design, fabrication, launch, and operations continue to motivate the development of new methodologies, techniques, and generally low cost and less stringently regulated satellites. These spacecraft employ low power 'lightsat' communications (versus TDRSS for NASA's LEO's) and typically fly missions with payload/experiment suites that can succeed, for example, without heavily redundant backup systems and large infrastructures of personnel and ground support systems. Such small yet adaptable satellites are also typified by their very short contract-to-launch times (often one to two years). This paper reflects several of the methodologies and perspectives of our successful involvement in these innovative programs and suggests how they might relieve NASA's mounting pressures to reduce the cost of both the spacecraft and their companion mission operations. It focuses on the use of adaptable, sufficiently powerful yet inexpensive PC-based ground systems for wide ranging user terminal (UT) applications and master control facilities for mission operations. These systems proved themselves in successfully controlling more than two dozen USAF, USN, and ARPA satellites at CTA/SS. UT versions have linked with both GEO and LEO satellites and functioned autonomously in relay roles often in remote parts of the world. LEO applications particularly illustrate the efficacy of these concepts since a user can easily mount a lightweight antenna, usually an omni or helix with light duty rotors and PC-based drivers. A few feet of coax connected to a small transceiver module (the size of a small PC) and a serial line to an associated PC establishes a communications link and together with the PC constitute a viable ground station. Applications included geomagnetic mapping; spaceborne solid state recorder validation; global store-and-forward data communications for both scientific and military purposes such as Desert Storm; UHF transponder services for both digital data and voice using a constellation; remote sensor monitoring of weather and oceanographic conditions; classified payloads; and UHF spectrum surveillance. Ground processing has been accomplished by automatic unattended or manual operation. Management of multiple assets highlights the relative ease with which two constellations totaling nine satellites were controlled from one system including constellation station keeping. Our experience in small end-to-end systems including concurrent design, development, and testing of the flight and operational ground systems offers low cost approaches to NASA scientific satellite operations of the 1990's.

Reiss, Keith↗

The application of Landsat data to mapping avalanche hazards

Two test areas, representing a variety of avalanche hazards, were selected in the San Juan Mountains of Colorado. Midwinter Landsat digital data were analyzed using a clustering technique, and the results compared to 1:24,000 scale maps of avalanche hazards derived from air photo interpretation and field surveys. Confined avalanches were readily identified because of the high contrast between the snow covered avalanche track and the adjacent forested slopes. Unconfined avalanches could not be identified without supplementary topographic data. Spatial characteristics were of primary importance in delineating avalanche tracks. Spatial resolution was the limiting factor in avalanche detection. Landsat data should prove useful for rapid reconnaissance mapping of avalanche hazards, particularly in the absence of other data sources.

Waterman, S.↗

Modernization of B-2 Data, Video, and Control Systems Infrastructure

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) Plum Brook Station (PBS) Spacecraft Propulsion Research Facility, commonly referred to as B-2, is NASA s third largest thermal-vacuum facility with propellant systems capability. B-2 has completed a modernization effort of its facility legacy data, video and control systems infrastructure to accommodate modern integrated testing and Information Technology (IT) Security requirements. Integrated systems tests have been conducted to demonstrate the new data, video and control systems functionality and capability. Discrete analog signal conditioners have been replaced by new programmable, signal processing hardware that is integrated with the data system. This integration supports automated calibration and verification of the analog subsystem. Modern measurement systems analysis (MSA) tools are being developed to help verify system health and measurement integrity. Legacy hard wired digital data systems have been replaced by distributed Fibre Channel (FC) network connected digitizers where high speed sampling rates have increased to 256,000 samples per second. Several analog video cameras have been replaced by digital image and storage systems. Hard-wired analog control systems have been replaced by Programmable Logic Controllers (PLC), fiber optic networks (FON) infrastructure and human machine interface (HMI) operator screens. New modern IT Security procedures and schemes have been employed to control data access and process control flows. Due to the nature of testing possible at B-2, flexibility and configurability of systems has been central to the architecture during modernization.

Cmar, Mark D.↗

Modernization of B-2 Data, Video, and Control Systems Infrastructure

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) Plum Brook Station (PBS) Spacecraft Propulsion Research Facility, commonly referred to as B-2, is NASA's third largest thermal-vacuum facility with propellant systems capability. B-2 has completed a modernization effort of its facility legacy data, video and control systems infrastructure to accommodate modern integrated testing and Information Technology (IT) Security requirements. Integrated systems tests have been conducted to demonstrate the new data, video and control systems functionality and capability. Discrete analog signal conditioners have been replaced by new programmable, signal processing hardware that is integrated with the data system. This integration supports automated calibration and verification of the analog subsystem. Modern measurement systems analysis (MSA) tools are being developed to help verify system health and measurement integrity. Legacy hard wired digital data systems have been replaced by distributed Fibre Channel (FC) network connected digitizers where high speed sampling rates have increased to 256,000 samples per second. Several analog video cameras have been replaced by digital image and storage systems. Hard-wired analog control systems have been replaced by Programmable Logic Controllers (PLC), fiber optic networks (FON) infrastructure and human machine interface (HMI) operator screens. New modern IT Security procedures and schemes have been employed to control data access and process control flows. Due to the nature of testing possible at B-2, flexibility and configurability of systems has been central to the architecture during modernization.

Cmar, Mark D.↗