SEARCH · Search NASA

Results for “errors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Fault and Error Latency Under Real Workload: an Experimental Study

A practical methodology for the study of fault and error latency is demonstrated under a real workload. This is the first study that measures and quantifies the latency under real workload and fills a major gap in the current understanding of workload-failure relationships. The methodology is based on low level data gathered on a VAX 11/780 during the normal workload conditions of the installation. Fault occurrence is simulated on the data, and the error generation and discovery process is reconstructed to determine latency. The analysis proceeds to combine the low level activity data with high level machine performance data to yield a better understanding of the phenomena. A strong relationship exists between latency and workload and that relationship is quantified. The sampling and reconstruction techniques used are also validated. Error latency in the memory where the operating system resides was studied using data on the physical memory access. Fault latency in the paged section of memory was determined using data from physical memory scans. Error latency in the microcontrol store was studied using data on the microcode access and usage.

Chillarege, Ram↗

NASA NTRS1987

Digital program for calculating static pressure position error

A computer program written to calculate the static pressure position error of airspeed systems contains five separate methods for determining position error, of which the user may select from one to five at a time. The program uses data from both the test aircraft and the ground-based radar to calculate the error. In addition, some of the methods require rawinsonde data or an atmospheric analysis, or both. The program output lists the corrections to Mach number, altitude, and static pressure that are due to position error. Reference values such as angle of attack, angle of sideslip, indicated Mach number, indicated pressure altitude, stagnation pressure, and total temperature are also listed.

Johnson, J. Blair↗

NASA NTRS1987

Detection of reflector surface error from near-field data: Effect of edge diffracted field

The surface accuracy of large reflector antennas must be maintained within certain tolerances if high gain/low sidelobe performance is to be achieved. Thus the measurement of the surface profile is an important part of the quality control procedure when constructing antennas of this type. An efficient method for surface profile measurement has been proposed, i.e., the reflector surface is calculated from the measured near-field phase data using the theory of geometric optics. For a surface profile calculation of this kind, it is necessary to know the margin of error built into the method of calculation. This will enable a specification of the tolerance from which the surface profile can be determined. When calculating the surface profile from near-field phase data, there are two main sources of error. The first is the measurement error in near-field phase data. The second arises from the edge diffracted fields that are superimposed on the reflected fields in the measured near-field data. The error in the calculated surface profile produced by the edge diffracted fields is examined.

Cherrette, Alan R.↗

NASA NTRS1987

Effect of sensor and actuator errors on static shape control for large space structures

An analytical study was performed to predict and assess the effect of actuator and sensor errors on the performance of a shape control procedure for flexible space structures using applied temperatures. Approximate formulas were derived for the expected value and variance of the rms distortion ratio (ratio of rms distortions with and without corrections) based on the assumption of zero-mean normally distributed random errors in measured distortions and actuator output temperatures. Studies were carried out for a 55-meter radiometer antenna reflector distorted from its ideal parabolic shape by nonuniform orbital heating. The first study consisted of varying the sensor and actuator errors for the case of 12 actuators and computing the distortion ratio. In the second study, sensor and actuator errors were prescribed and the effect of increasing the number of actuators was evaluated.

Haftka, Raphael T.↗

NASA NTRS1986

A cascaded error control coding scheme for space and satellite communication

An error control coding scheme for space and satellite communications is presented. The scheme is attained by cascading two codes, the inner and outer codes. Error performance of the scheme is analyzed. It is shown that, if the inner and outer codes are chosen properly, extremely high reliability can be achieved even for a high channel bit-error-rate. Several exmple schemes are studied. One of the example schemes is proposed to NASA for satellite or spacecraft downlink error control.

Lin, Shu↗

NASA NTRS1987

Local concurrent error detection and correction in data structures using virtual backpointers

A new technique, based on virtual backpointers, for local concurrent error detection and correction in linked data structures is presented. Two new data structures, the Virtual Double Linked List, and the B-tree with Virtual Backpointers, are described. For these structures, double errors can be detected in 0(1) time and errors detected during forward moves can be corrected in 0(1) time. The application of a concurrent auditor process to data structure error detection and correction is analyzed, and an implementation is described, to determine the effect on mean time to failure of a multi-user shared database system. The implementation utilizes a Sequent shared memory multiprocessor system operating on a shared databased of Virtual Double Linked Lists.

Li, C. C.↗

NASA NTRS1987

Jet stream velocity errors in general circulation models

The longitude and time dependence of excessive wind speed errors above subtropical jets in current GCM forecasts is studied for 14 five-day winter forecasts using the NASA Goddard Laboratory for Atmospheres fourth-order GCM. Several distinct phenomena, which may be divided into four categories, are found to contribute to the excess winds. These categories are: (1) error growth above the jet near the Himalayas; (2) error growth above the jet initiated elsewhere followed by advection; (3) tropical moisture bursts appearing in equatorial regions and migrating northeastward to merge with and distort the jet; and (4) undulatory growth of waves in the meridional component of the jet stream velocity. The results of additional sensitivity studies of the Himalayan region error are also reported.

Tenenbaum, J.↗

NASA NTRS1988

Error indicators and accuracy improvements of finite element solutions

Practical and reliable estimators of the discretization errors in engineering problems are developed. Error indicators for identifying the regions or elements of the solution domain which are likely to have the largest discretization errors are presented, and a simple computational procedure for improving the accuracy of the finite element solutions for shell problems is given. The similarities between the proposed procedure and a preconditioned conjugate gradient (PCG) technique are identified and exploited to generate pointwise error indicators from the PCG technique. Numerical examples in the linear static analysis of shells are presented.

Noor, Ahmed K.↗

NASA NTRS1987

The generalized transmission error of spiral bevel gears

The traditional definition of the transmission error of parallel-axis gear pairs is reviewed and shown to be unsuitable for characterizing the deviation from conjugate action of bevel gear pairs for vibration excitation characterization purposes. This situation is rectified by generalizing the concept of the transmission error of parallel-axis gears to a three-component transmission error for spiral bevel gears of nominal spherical involute design. A general relationship is derived which expresses the contributions to the three-component transmission error from each gear of a meshing spiral bevel pair as a linear transformation of the six coordinates that describe the deviation of the shaft centerline position of each gear of the pair from the position of its rigid perfect involute counterpart.

Mark, W. D.↗

NASA NTRS1988

Error dynamics and relative orbital uncertainty of the Magellan spacecraft

Relative error is discussed in light of a proposed orbiter mission to Venus. It is hypothesized that the relative (position) error of the orbiting spacecraft between disjoint data sets will be large because of residual uncertainties of the absolute estimates and their decorrelation caused by succeeding estimates. A method is proposed to limit relative error by inducing correlations between the estimates on successive data arcs. These correlations are induced by overlapping the data arcs. Covariance analyses of the data sets are undertaken at two distinct mapping times, yielding the relative error between those mapping times. The technique is applied to a mosaicking problem on a specific day in the mission.

Haw, R. J.↗

NASA NTRS1988

Error analysis for a Mars landing

This paper presents the methodology and preliminary results of a Mars landing error study. Aeromaneuvering was used to reduce the effects of errors. The guidance and navigation techniques used were based on those used for the Space Shuttle. A simulation was built to determine the performance of these techniques in a realistic Mars landing scenario. The results indicate that knowledge errors dominate, and that terminal three-sigma errors of between 1 and 15 kilometers can be achieved depending on the data types available. The data types studied were restricted to those currently under consideration for the Mars Rover/Sample Return Mission.

Mceneaney, W. M.↗

NASA NTRS1988

Results of software error-data experiments

In order to evaluate existing software reliability models and proposed modeling approaches, a search was conducted for data on the software failure process. This search revealed that the data necessary for this evaluation were not available. As a result, a research effort was initiated by NASA to generate data on which to base the development of credible methods for assessing the reliability of software targeted for flight-crucial applications. Two sets of software error-data experiments were conducted by different research groups. The results of the experiments were consistent: errors caused by different faults in a program occurred at widely varying rates; program failure rates exhibited a log-linear trend with respect to the number of faults corrected; some faults were found to interact in either concealing or revealing ways; and contiguous regions of the input space which cause a program to generate errors, called error crystals, were found and characterized for some faults. Collectively, these experiments have produced information on software failure which must be accounted for in software reliability modeling approaches.

Finelli, George B.↗

NASA NTRS1988

On correcting radial orbit errors for altimetric satellites using crossover analysis

A method is proposed for correcting radial orbit error in measurements of sea surface height using a satellite altimeter. Traditionally, the orbit error is modeled in terms of a Fourier series with the Fourier coefficients determined by minimizing the residual crossover difference in a least-squares sense. In this method an a priori constraint must be imposed to obtain a unique solution. It is shown that by using singular value decomposition, no such constraint is needed. This proposed method leaves the geographically dependent errors unchanged and makes only those corrections warranted by the information contained in crossover differences. Thus, the resultant ocean topography is free from any undue distortion which might be incurred by an a priori constraint. It is suggested that the method is useful for application to high-accuracy altimetric mission, because the orbit error can be reduced without compromising the accuracy of the measured mean ocean topography.

Fu, Lee-Lueng↗

NASA NTRS1989

Internal Correction Of Errors In A DRAM

Error-correcting Hamming code built into circuit. A 256 K dynamic random-access memory (DRAM) circuit incorporates Hamming error-correcting code in its layout. Feature provides faster detection and correction of errors at less cost in amount of equipment, operating time, and software. On-chip error-correcting feature also makes new DRAM less susceptible to single-event upsets.

Zoutendyk, John A.↗

NASA NTRS1988

A study for systematic errors of the GLA forecast model in tropical regions

From the sensitivity studies performed with the Goddard Laboratory for Atmospheres (GLA) analysis/forecast system, it was revealed that the forecast errors in the tropics affect the ability to forecast midlatitude weather in some cases. Apparently, the forecast errors occurring in the tropics can propagate to midlatitudes. Therefore, the systematic error analysis of the GLA forecast system becomes a necessary step in improving the model's forecast performance. The major effort of this study is to examine the possible impact of the hydrological-cycle forecast error on dynamical fields in the GLA forecast system.

Chen, Tsing-Chang↗

NASA NTRS1987

Monitoring robot actions for error detection and recovery

Reliability is a serious problem in computer controlled robot systems. Although robots serve successfully in relatively simple applications such as painting and spot welding, their potential in areas such as automated assembly is hampered by programming problems. A program for assembling parts may be logically correct, execute correctly on a simulator, and even execute correctly on a robot most of the time, yet still fail unexpectedly in the face of real world uncertainties. Recovery from such errors is far more complicated than recovery from simple controller errors, since even expected errors can often manifest themselves in unexpected ways. Here, a novel approach is presented for improving robot reliability. Instead of anticipating errors, researchers use knowledge-based programming techniques so that the robot can autonomously exploit knowledge about its task and environment to detect and recover from failures. They describe preliminary experiment of a system that they designed and constructed.

Gini, M.↗

NASA NTRS1989

Control of the errors of discretization and idealization in finite element analysis

Understanding of the basic principles which control errors of discretization in finite element analysis has increased very substantially since 1980. The main milestones were: (1) development of the theoretical basis of p-extensions (1981); (2) understanding of the proper interplay between mesh design and assignment of polynomial degree to elements. Practical realization of exponential convergence rates, independently of the smoothness of the exact solution (1984); and (3) industrial experience with the new finite element technology known as the p- or hp-version of the finite element method: General Dynamics reported thirty- to forty-fold savings in terms of human time and large savings in computer time (1986). Lockheed reported favorably on their evaluation of error estimation and quality control capabilities of the p-version in industrial settings (1987). The gains in our understanding of how to control the errors of discretization represent only half of the control necessary to ensure that a numerical model is in fact an accurate representation of the corresponding physical system. Control of the errors of idealization is equally important. A brief overview of the main ideas of how to ensure the quality and reliability of mathematical models of structural systems is presented.

Szabo, Barna A.↗

NASA NTRS1988

Cyclic unequal error protection codes constructed from cyclic codes of composite length

The unequal error correction capabilities of binary cyclic codes of composite length are investigated. Under certain conditions, direct sums of concatenated codes have unequal error correction capabilities. By a modified Hartmann and Tzeng algorithm, it is shown that a binary cyclic code of composite length is equivalent to the direct sum of concatenated codes. With this, some binary cyclic unequal error protection (UEP) codes are constructed. Finally, two-level UEP cyclic direct-sum codes are presented which provide error correction capabilities higher than those guaranteed by the Blokh-Zyablov constructions.

Lin, Mao-Chao↗